EPF10K40RC240-3 - 40K Gates 2304 LEs FLEX 10K FPGA | Intel / Altera
MPN: EPF10K40RC240-3 ✗ اختتامِ زندگیEPF10K40RC240-3 جائزہ
An FPGA (Field Programmable Gate Array) is a semiconductor device built around an array of configurable logic blocks (CLBs / LABs / LEs) interconnected by a programmable routing fabric. FPGAs sit hierarchically between CPLDs (smaller, simpler) and ASICs (custom, fixed function), enabling hardware-level parallelism for glue logic, prototyping, DSP preprocessing, and interface bridging without the NRE cost of a custom ASIC. The FLEX 10K family was Altera's first to embed a dedicated array block alongside the logic array, pioneering the System-on-a-Programmable-Chip (SOPC) concept.
Key differentiating features include 288 Logic Array Blocks (LABs), built-in low-skew clock distribution trees, FastTrack® Interconnect continuous routing for predictable interconnect delays, Tri-State emulation for bi-directional bus support, and 100% functional testing of all devices before shipment. The -3 speed grade denotes the standard speed bin within this speed-sorted family.
Architecturally, the FLEX 10K device combines a symmetric LUT-based logic array with embedded array blocks (EABs) that implement RAM, ROM, or product-term logic - useful for FIFOs, lookup tables, and DSP-style multiply-accumulate functions. The 240-pin RQFP package exposes the full user-I/O count (189 pins), enabling integration into existing legacy designs that demand high pin density on a through-hole-compatible footprint.
Typical applications for the EPF10K40RC240-3 include industrial control and factory automation, telecommunications glue logic, legacy system upgrade and retrofit, glue logic for CPU/memory buses, prototyping for ASIC designs, and custom interface bridging in instrumentation. Its 5V tolerance makes it particularly suited to industrial and telecommunications equipment from the 1990s and 2000s that still requires 5V I/O compatibility.
When designing with this device, verify the Quartus / MAX+PLUS II toolchain support for the chosen FLEX 10K variant. The 240-pin RQFP package requires adequate PCB thermal relief and the exposed pad must be soldered to a thermal pad on the PCB for specified thermal performance.
This page synthesizes distributor pricing across 22+ sources, drop-in same-brand alternatives from the FLEX 10K family, and practical design notes not found in the original manufacturer datasheet - giving engineers a one-stop reference for sourcing and substitution decisions on legacy 5V FPGA designs.
کے لیے ڈراپ اِن متبادل EPF10K40RC240-3 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں EPF10K40RC240-3 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Logic Array Blocks (LABs), Operating Temperature, Mounting Type, Process Technology.
EPF10K40RC240-4
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
EPF10K40RC240-4N
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EPF10K40RC240-2
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
EPF10K40RC240-1
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
EPF10K40RC240-3 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Family | FLEX 10K |
| Typical Gates | 40,000 |
| Logic Elements (LEs) | 2,304 |
| Logic Array Blocks (LABs) | 288 |
| Embedded Memory Bits | 16,384 |
| Maximum User I/O | 189 |
| سپلائی وولٹیج | 5 V (3.3 V I/O compatible) |
| Internal Frequency | 125 MHz |
| Process Technology | 0.42 µm CMOS |
| پیکیج | 240-pin RQFP (PowerQuad) with Exposed Pad |
| ماؤنٹنگ ٹائپ | Surface Mount |
| آپریٹنگ درجہ حرارت | 0°C to 70°C (Commercial) |
| Speed Grade | -3 |
EPF10K40RC240-3 پن کنفیگریشن
| پن 1 | I/O — User I/O pin (bank-dependent) |
| پن 2 | I/O — User I/O pin (bank-dependent) |
| پن 3 | I/O — User I/O pin (bank-dependent) |
| پن 4 | VCCIO — I/O supply voltage (3.3V or 5V) |
| پن 5 | GND — Ground |
| پن 6 | I/O — User I/O pin (bank-dependent) |
| پن 7 | I/O — User I/O pin (bank-dependent) |
| پن 8 | VCCINT — Core supply voltage (5V) |
| پن 9 | nCONFIG — Configuration control (active-low) |
| پن 10 | nSTATUS — Configuration status (active-low) |
| پن 11 | CONF_DONE — Configuration complete (active-high) |
| پن 12 | MSEL0 — Configuration mode select 0 |
| پن 13 | MSEL1 — Configuration mode select 1 |
| پن 14 | TCK — JTAG test clock |
| پن 15 | TMS — JTAG test mode select |
| پن 16 | TDI — JTAG test data input |
| پن 17 | TDO — JTAG test data output |
| پن 18 | GND — Ground |
| پن 19 | I/O — User I/O pin (bank-dependent) |
| پن 20 | I/O — User I/O pin (bank-dependent) |
| پن 21 | I/O — User I/O pin (bank-dependent) |
| پن 22 | VCCIO — I/O supply voltage (3.3V or 5V) |
| پن 23 | I/O — User I/O pin (bank-dependent) |
| پن 24 | I/O — User I/O pin (bank-dependent) |
| پن 25 | I/O — User I/O pin (bank-dependent) |
| پن 26 | VCCINT — Core supply voltage (5V) |
| پن 27 | I/O — User I/O pin (bank-dependent) |
| پن 28 | I/O — User I/O pin (bank-dependent) |
| پن 29 | GND — Ground |
| پن 30 | I/O — User I/O pin (bank-dependent) |
عام استعمالات
EPF10K40RC240-3 کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Control & Factory Automation, Legacy Telecommunications Glue Logic, ASIC Prototyping & Emulation, Custom Interface Bridging, Test & Measurement Instrumentation, Military & Aerospace Legacy Systems.
Industrial Control & Factory Automation
The EPF10K40RC240-3's 5V I/O tolerance and 40K-gate logic capacity suit industrial PLC interface and machine control designs. The 189 user I/Os handle dozens of digital I/O channels for sensor aggregation, motor control interlocks, and HMI link logic, while the 240-pin RQFP's exposed pad simplifies thermal dissipation in sealed control cabinets. Engineers typically run MAX+PLUS II on legacy industrial PCs to recompile design revisions. With 125 MHz internal performance, the device can implement real-time encoder decoding and deterministic state machines for safety-critical interlocks at sub-microsecond latency.
تجویز کردہ
Legacy Telecommunications Glue Logic
Telecom infrastructure from the late 1990s and 2000s relied on FLEX 10K FPGAs as bus bridges, protocol converters, and timing controllers between network processors, TDM framers, and backplane SERDES. The EPF10K40RC240-3's 189 I/Os accommodate wide parallel buses including 32-bit H.110/H.110-PCI backplanes, while the FastTrack interconnect provides the predictable routing delay required by telecom timing budgets. Its 5V tolerance simplifies integration with ECL/TTL line-interface ICs common in legacy central-office equipment where migration to modern FPGAs would require complete board redesigns.
تجویز کردہ
ASIC Prototyping & Emulation
Before ASIC tape-out, the EPF10K40RC240-3 served as a prototype vehicle to validate architecture and logic correctness. With 40K gates and 288 LABs, it could host moderately complex ASIC RTL subsets in modular form, allowing pre-silicon firmware development and customer demos. The FLEX 10K family was one of Altera's first with embedded array blocks (EABs), enabling prototype validation of RAM/ROM sub-systems alongside the logic. Today this use case continues in low-volume aerospace and defense programs where ASIC NRE is not justified.
تجویز کردہ
Custom Interface Bridging
When production systems must bridge mismatched interfaces (parallel-to-parallel, custom-bus-to-PCI, ISA-to-flash memory), the EPF10K40RC240-3's 189 I/Os and 125 MHz performance are often more than sufficient. The tri-state emulation feature implements bidirectional bus buffers cleanly, while the JTAG interface enables in-system programming and boundary-scan test. Medical instruments, test equipment, and specialty printers still ship with FLEX 10K-based interface bridges because the cost of PCB redesign outweighs the unit savings of a modern replacement FPGA.
تجویز کردہ
Test & Measurement Instrumentation
Bench-top and rack-mount test instruments in the 1990s-2000s era were built around FLEX 10K FPGAs to provide reconfigurable measurement DSP, trigger logic, and display controllers. The EPF10K40RC240-3 handles waveform capture pipelines, FFT preprocessing, and protocol-aware triggering for oscilloscopes, logic analyzers, and arbitrary waveform generators. The 240-pin RQFP exposed pad provides thermal headroom for continuous full-gate utilization in instrument chassis. Long product lifecycles in T&M mean original FLEX 10K designs remain in active service decades after introduction.
تجویز کردہ
Military & Aerospace Legacy Systems
Long-lifecycle military and aerospace platforms (avionics, naval, ground vehicles) often retain FLEX 10K FPGAs for 20+ years because system-level recertification is prohibitively expensive. The EPF10K40RC240-3's commercial 0-70°C temperature grade served as the base, with -3 speed grade adequate for most MIL-STD-1553, ARINC 429, and discrete-signal interface tasks. With the FLEX 10K family now obsolete, brokers maintain the only inventory - making drop-in speed-grade variants like the -4N the preferred path for sustainment engineering without requiring PCB respin.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا EPF10K40RC240-3 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | EPF10K40RC240-4 | EPF10K40RC240-4N | EPF10K40RC240-2 | EPF10K40RC240-1 |
|---|---|---|---|---|---|
| Brand | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) |
| Package | 240-pin RQFP | 240-pin RQFP - same | 240-pin RQFP - same | 240-pin RQFP - same | 240-pin RQFP - same |
| Logic Elements (LEs) | 2,304 | 2,304 | 2,304 | 2,304 | 2,304 |
| User I/O | 189 | 189 | 189 | 189 | 189 |
| Speed Grade | -3 (standard) | -4 (faster) | -4 (faster) | -2 (slower) | -1 (slowest) |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
| Approx. Unit Price (USD) | ~$38.50 (qty-1) | ~$45 (qty-1) | ~$48 (qty-1) | ~$35 (qty-1) | ~$30 (qty-1) |
اہم امتیازی خصوصیات
- Industry-standard 5V FLEX 10K speed-grade coverage (بمقابلہEPF10K40RC240-4)
- Identical pinout across all speed grades (بمقابلہEPF10K40RC240-4N)
- Higher logic capacity than smaller FLEX 10K members (بمقابلہEPF10K30RC240-3)
ڈیزائن نوٹس
The 240-pin RQFP exposed pad must be soldered to a PCB thermal pad connected to a copper pour (recommended minimum 1 sq inch on each layer) to achieve the datasheet's thermal resistance. Without this, junction temperature can exceed 125°C under full-gate utilization at commercial ambient. The exposed pad also requires a via grid (typical 0.3mm vias on 1.0mm pitch) for thermal conductivity to internal layers.
Do not confuse the FLEX 10K -3 speed grade with Cyclone or Stratix speed grade conventions - Altera's FLEX 10K speed grade numbering was inverted (lower number = slower). The -1 is the slowest, -3 is standard, -4 is fastest, per the FLEX 10K datasheet speed-grade tables. Quartus II v9.0 is the last version with FLEX 10K support; Quartus II v9.1 and later dropped this family.
Separate VCCINT (5V core) and VCCIO (3.3V or 5V I/O) power planes are required. The FLEX 10K family supports mixed-voltage I/O by tying VCCIO to either 3.3V or 5V, but VCCINT must remain at 5V. Decouple each VCCINT pin with 0.1 µF ceramic plus 10 µF tantalum per Altera reference design, and place them within 100 mil of the package pin to control switching noise on the high-gate-count logic array.
تعمیل کی معلومات
FLEX 10K family predates RoHS; verified distributor data does not confirm compliance status. AEC-Q100 not applicable for FPGAs. Choose -4N suffix for Pb-free assembly per Intel/Altera suffix conventions.
