HMC649ALP6ETR - 6-Bit Digital Phase Shifter 3-6GHz | Analog Devices
MPN: HMC649ALP6ETR ✓ فعالHMC649ALP6ETR جائزہ
A digital phase shifter is a critical RF component that adjusts the phase of a signal passing through it, controlled by digital logic bits. It is used in phased-array antennas, beamforming networks, and radar systems to steer the antenna beam electronically without moving parts. The HMC649ALP6ETR integrates the phase-shifting network and digital control interface into a single MMIC, simplifying system design and reducing board space.
Key features include a frequency range of 3 GHz to 6 GHz, 6-bit resolution with 64 phase states, low insertion loss of typically 6 dB, and RMS phase error of less than 3 degrees. The device operates with a single +5V supply and a -5V supply, with control voltages of 0/+5V. It is fabricated using GaAs MMIC technology, ensuring consistent performance across temperature and process variations.
The HMC649ALP6ETR uses a switched-line phase shifter architecture, where different path lengths are selected by PIN diodes or FET switches to achieve precise phase shifts. This design provides wideband performance and high power handling capability. The digital control interface is compatible with TTL/CMOS logic levels, allowing direct connection to microcontrollers or FPGAs.
Typical applications include phased-array radar, satellite communications, 5G beamforming, and test equipment. The device's wide frequency range and high phase accuracy make it ideal for both military and commercial systems. Its small package and low power consumption enable integration into portable and handheld devices.
When designing with this device, ensure proper decoupling of the Vdd and Vss supplies and provide adequate ground vias under the exposed pad for thermal and electrical performance. The control lines should be kept short to minimize parasitic inductance and maintain fast switching speeds.
کے لیے ڈراپ اِن متبادل HMC649ALP6ETR — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں HMC649ALP6ETR (یکساں فارم فیکٹر اور فٹ پرنٹ).
HMC649ALP6E
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →HMC649ALP6ETR
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →HMC649ALP6E
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →HMC649ALP6E
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →HMC649ALP6E
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →HMC649ALP6ETR تفصیلات (مینوفیکچرر کی شائع کردہ)
| Frequency Range | 3 GHz to 6 GHz |
| Phase Shift Range | 0° to 360° |
| Phase Step | 5.625° |
| Number of Bits | 6 |
| Insertion Loss | 6 dB (typical) |
| RMS Phase Error | < 3° |
| Control Voltage | 0/+5V |
| Supply Voltage (Vdd) | +5V |
| Supply Voltage (Vss) | -5V |
| پیکیج | 28-QFN (6x6 mm) |
| آپریٹنگ درجہ حرارت | -40°C to +85°C |
| Technology | GaAs MMIC |
| RoHS اسٹیٹس | Compliant |
| ماؤنٹنگ ٹائپ | Surface Mount |
HMC649ALP6ETR پن کنفیگریشن
| پن 1 | RFIN — RF input port |
| پن 2 | GND — Ground |
| پن 3 | VDD — Positive supply (+5V) |
| پن 4 | VSS — Negative supply (-5V) |
| پن 5 | D0 — Control bit 0 (LSB) |
| پن 6 | D1 — Control bit 1 |
| پن 7 | D2 — Control bit 2 |
| پن 8 | D3 — Control bit 3 |
| پن 9 | D4 — Control bit 4 |
| پن 10 | D5 — Control bit 5 (MSB) |
| پن 11 | RFOUT — RF output port |
| پن 12 | GND — Ground |
| پن 13 | GND — Ground |
| پن 14 | GND — Ground |
پاور اور تھرمل خصوصیات
| پاور ان پٹ | +5V |
| آپریٹنگ درجہ حرارت | -40°C to +85°C |
HMC649ALP6ETR کے لیے پاور ان پٹ اور تھرمل پیرامیٹرز جیسا کہ مینوفیکچرر نے شائع کیے ہیں۔
عام استعمالات
HMC649ALP6ETR کے لیے موزوں ہے 6 ایپلیکیشنs: Phased-Array Radar, 5G Beamforming, Satellite Communications, Test and Measurement Equipment, Electronic Warfare Systems, Point-to-Point Communication.
Phased-Array Radar
The HMC649ALP6ETR is ideal for phased-array radar systems operating in the 3-6 GHz band. Its 6-bit phase resolution (5.625° steps) enables precise beam steering, while the low insertion loss (6 dB) minimizes signal degradation. The compact 28-QFN package allows dense integration in array modules. The device's GaAs MMIC technology ensures consistent phase accuracy across temperature, critical for radar performance. In a typical T/R module, the phase shifter is placed between the amplifier and antenna element, with control lines driven by a beamforming FPGA. The wide frequency range supports multi-band radar operation, and the digital interface simplifies calibration and beam control.
تجویز کردہ
5G Beamforming
In 5G base stations, the HMC649ALP6ETR provides phase shifting for massive MIMO antennas. Its 3-6 GHz frequency range covers n77/n78/n79 bands, and the 6-bit resolution allows fine beam granularity. The low RMS phase error (<3°) ensures accurate beam pointing, improving spectral efficiency. The device's small footprint and low power consumption are advantageous for dense antenna arrays. It can be used in both transmit and receive paths, with control signals from baseband processors. The GaAs technology offers high linearity, essential for maintaining signal integrity in multi-carrier environments. The phase shifter's wideband performance also supports carrier aggregation.
تجویز کردہ
Satellite Communications
The HMC649ALP6ETR is suitable for satellite communication ground terminals and payloads. Its 3-6 GHz frequency range covers C-band downlinks, and the 6-bit phase control enables precise antenna pointing for tracking. The device's high phase accuracy and low insertion loss are critical for maintaining link budget. The compact package is ideal for space-constrained satellite electronics. The digital interface allows remote configuration, essential for space applications. The GaAs MMIC provides radiation tolerance, though additional shielding may be required. The phase shifter can be used in phased-array antennas for electronic beam steering, reducing mechanical complexity.
تجویز کردہ
Test and Measurement Equipment
In test equipment such as vector network analyzers and phase noise measurement systems, the HMC649ALP6ETR provides precise phase control for calibration and signal processing. Its wide frequency range (3-6 GHz) and high resolution (5.625° steps) allow accurate phase adjustments. The low insertion loss and high linearity ensure measurement accuracy. The device's digital interface enables automated calibration routines. The compact package is suitable for benchtop instruments. The phase shifter can be used in phase-locked loops for frequency synthesis, providing fine phase tuning. Its consistent performance over temperature makes it reliable for production test systems.
تجویز کردہ
Electronic Warfare Systems
The HMC649ALP6ETR is used in electronic warfare (EW) systems for phase control in jamming and direction-finding applications. Its 3-6 GHz frequency range covers many radar bands, and the 6-bit phase resolution enables precise beam steering. The device's fast switching speed and low insertion loss are critical for EW performance. The compact package allows integration into airborne and ground-based systems. The digital interface supports rapid reconfiguration, essential for dynamic threat environments. The GaAs technology provides high power handling, though external amplification may be needed. The phase shifter's wideband performance supports multiple frequency bands in a single system.
تجویز کردہ
Point-to-Point Communication
In point-to-point microwave links, the HMC649ALP6ETR provides phase alignment for antenna arrays and polarization control. Its 3-6 GHz frequency range covers common backhaul bands, and the 6-bit phase resolution allows fine adjustment. The low insertion loss (6 dB) minimizes signal attenuation, preserving link margin. The device's compact package is suitable for outdoor units. The digital interface enables remote phase adjustment, simplifying installation and maintenance. The GaAs MMIC offers high reliability in harsh environments. The phase shifter can be used in adaptive beamforming to mitigate interference and improve link quality.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا HMC649ALP6ETR — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | HMC649ALP6E | HMC649ALP6E | HMC649ALP6E |
|---|---|---|---|---|
| Package | 28-QFN (6x6 mm) | 28-QFN (6x6 mm) | 28-QFN (6x6 mm) | 28-QFN (6x6 mm) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Frequency Range | 3-6 GHz | 3-6 GHz | 3-6 GHz | 3-6 GHz |
| Phase Resolution | 6-bit, 5.625° | 6-bit, 5.625° | 6-bit, 5.625° | 6-bit, 5.625° |
| Insertion Loss | 6 dB | 6 dB | 6 dB | 6 dB |
| Supply Voltage | +5V/-5V | +5V/-5V | +5V/-5V | +5V/-5V |
| Control Voltage | 0/+5V | 0/+5V | 0/+5V | 0/+5V |
| Technology | GaAs MMIC | GaAs MMIC | GaAs MMIC | GaAs MMIC |
اہم امتیازی خصوصیات
- Wide frequency range of 3-6 GHz (بمقابلہHMC649ALP6E)
- 6-bit phase resolution with 5.625° steps (بمقابلہHMC649ALP6E)
- Low insertion loss of 6 dB (بمقابلہHMC649ALP6E)
ڈیزائن نوٹس
The HMC649ALP6ETR requires dual supplies: Vdd = +5V and Vss = -5V. Ensure these supplies are well-regulated and decoupled with 100nF capacitors close to the pins. The control voltage should be 0V or +5V, compatible with TTL/CMOS logic. Avoid exceeding the absolute maximum ratings to prevent damage.
For optimal RF performance, use a 50-ohm controlled impedance transmission line for the RF input and output. Place ground vias around the RF traces and under the exposed pad to minimize parasitic inductance. The exposed pad should be soldered to a ground plane for thermal and electrical grounding.
Ensure the control lines are not left floating; they should be driven to a valid logic level. Also, verify that the phase shifter is properly matched to 50 ohms at both RF ports. Incorrect biasing or mismatched terminations can cause increased insertion loss and phase error.
تعمیل کی معلومات
RoHS compliant per distributor listings. No AEC-Q100 qualification indicated for this RF component.
