Analog Devices

LT1215CS8 - 23MHz Dual Precision Op Amp | Analog Devices

MPN: LT1215CS8 ✓ فعال
Single supply Vdss 50 mA Id 8-SOIC (0.154 inch, 3.90 mm width) Package
MOQ: 1 |

LT1215CS8 جائزہ

Analog Devices LT1215CS8 is a dual, single-supply precision operational amplifier with a 23 MHz gain-bandwidth product and a 50 V/µs slew rate, housed in an 8-pin SOIC package. The LT1215 family combines two amplifier channels with the DC precision required for instrumentation, signal-conditioning, and active-filter designs.

An operational amplifier, or op amp, is a high-gain differential-input amplifier whose feedback network defines its closed-loop behavior. Within the amplifier hierarchy, the LT1215CS8 is a precision operational amplifier used for low-level signal amplification, impedance buffering, filtering, and feedback control. Its dual-channel configuration provides two amplifiers in one compact surface-mount package while reducing the number of components required on a circuit board.

The principal highlighted performance characteristics of the LT1215 are its 23 MHz gain-bandwidth product and 50 V/µs slew rate. These values support comparatively fast closed-loop operation and make the device suitable for signal paths that require both bandwidth and slew-rate capability. The manufacturer also describes the LT1215 and LT1216 family as single-supply precision amplifiers whose DC precision eliminates external trimming in most systems.

The LT1215 is a dual amplifier, whereas the related LT1216 is a quad version of the same amplifier family. This distinction is important when selecting a package and pin count: the LT1215CS8 uses an 8-pin SOIC, while a quad implementation requires a different package and pin assignment. Design engineers should therefore verify the complete pin description table in the manufacturer datasheet before assigning amplifier inputs, outputs, supply rails, and exposed connections.

Typical uses include precision instrumentation, low-level sensor-signal conditioning, active filters, sample-and-hold circuitry, and general-purpose analog signal processing. The two channels can be used together for cascaded stages, differential signal conditioning, or independent amplifier functions. Input and output impedance requirements, allowable common-mode range, noise, offset, and stability behavior should be checked against the application signal range before finalizing the circuit.

For single-supply operation, the circuit must provide a suitable bypass strategy around the power pins and maintain the amplifier within its common-mode input range. Decoupling capacitors should be placed close to the device, and sensitive inputs should use layouts that minimize leakage from high-impedance nodes. Output loading and feedback-component selection also affect achievable bandwidth and closed-loop response.

This product page combines the manufacturer’s device description with package information, engineering application guidance, selection criteria, and a structured view of the LT1215CS8’s role in precision analog design. It also distinguishes the dual LT1215 from the quad LT1216 and identifies where the manufacturer datasheet is needed for final pin-level implementation decisions.

کے لیے ڈراپ اِن متبادل LT1215CS8 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔

متبادل کی درخواست کریں

LT1215CS8 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Amplifier Type Precision operational amplifier
Number of Channels 2
Gain-Bandwidth Product 23 MHz
Slew Rate 50 V/µs
Supply Type Single supply
Minimum Supply Voltage 2.5 V
Maximum Supply Voltage 36 V
Input Offset Voltage 250 µV
Output Current per Channel 50 mA
ماؤنٹنگ ٹائپ Surface mount
پیکیج 8-SOIC (0.154 inch, 3.90 mm width)
پنز کی تعداد 8
Related Quad Version LT1216

LT1215CS8 8-soic (0.154 inch, 3.90 mm width) پن کنفیگریشن گائیڈ

LT1215CS8 (8-soic (0.154 inch, 3.90 mm width) پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

LT1215CS8 کے لیے 8-soic (0.154 inch, 3.90 mm width) پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں LT1215CS8.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

LT1215CS8 کے لیے موزوں ہے 6 ایپلیکیشنs: Precision Instrumentation, Active Filter Design, Low-Level Sensor Conditioning, Sample-and-Hold Signal Processing, Audio and Communication Buffers, Power-Control Feedback Networks.

🔧

Precision Instrumentation

The LT1215CS8 fits low-level instrumentation signal paths that require two precision amplifier channels in one 8-SOIC package. Its 23 MHz gain-bandwidth product supports closed-loop bandwidth beyond basic precision-amplifier designs, while the 50 V/µs slew rate gives the output more capability to follow faster signal transitions. The two channels can form a cascaded gain stage or perform separate conditioning functions. Before finalizing the design, confirm the 250 µV input-offset specification, input bias current, noise, and common-mode range against the smallest signals handled by the instrument.

🎛️

Active Filter Design

The LT1215CS8 is appropriate for active filters whose components require appreciable bandwidth and slew rate. Its 23 MHz gain-bandwidth product provides more closed-loop signal-path range than a conventional precision op amp, and the 50 V/µs slew rate helps preserve large-signal response at higher frequencies. Both channels may be used to build a second-order or multistage filter. Component tolerances, amplifier noise, input bias current, and stability with the selected feedback network remain important design checks when defining cutoff frequency and gain.

📡

Low-Level Sensor Conditioning

The LT1215CS8 can amplify weak sensor outputs where DC accuracy and bandwidth must coexist. The manufacturer-described precision characteristics support signal conditioning, while the 23 MHz gain-bandwidth product and 50 V/µs slew rate provide dynamic response for sensor signals that are not strictly DC. Use one channel for initial gain and the other for filtering or buffering as appropriate. Confirm that sensor output levels remain within the LT1215’s common-mode input range when operated from a single supply, and account for input bias current when designing high-source-impedance sensors.

📈

Sample-and-Hold Signal Processing

The LT1215CS8’s combination of precision operation, 23 MHz gain-bandwidth product, and 50 V/µs slew rate makes it suitable for sample-and-hold and related acquisition circuits. Fast closed-loop operation can reduce the time required for the amplifier to settle after a sampled input changes. Actual acquisition accuracy also depends on switch resistance, hold capacitor leakage, clock timing, and output loading. Check those external circuit elements together with the amplifier’s offset and bias-current characteristics to determine the final acquisition resolution.

🌐

Audio and Communication Buffers

The LT1215CS8 can serve as an active buffer or gain stage in moderate-bandwidth audio and communication circuitry. Its 50 V/µs slew rate supports faster large-signal transitions than a basic precision op amp, while the dual configuration allows separate handling of two channels. The device’s noise and distortion characteristics should be compared with the signal-chain budget at the frequencies of interest. For communication links with higher bandwidth or lower noise requirements, verify those limits in the manufacturer datasheet before assigning the part to the design.

⚡

Power-Control Feedback Networks

The LT1215CS8 can implement error-amplifier or feedback functions in analog power-control systems where the control loop benefits from its 23 MHz gain-bandwidth product and 50 V/µs slew rate. Two channels can be used for separate control and monitoring functions. Stability depends on the power-stage impedance, compensation network, loop gain, and control-loop delay. Keep the feedback components close to the amplifier, avoid long high-impedance routes, and validate transient response across line, load, and temperature extremes.

What is the LT1215CS8?
The LT1215CS8 is a dual, single-supply precision operational amplifier from Analog Devices with a 23 MHz gain-bandwidth product and a 50 V/µs slew rate. According to the Analog Devices LT1215 product page, the device is intended for precision signal-processing applications where DC accuracy and dynamic performance are both important. The LT1215CS8 is packaged in an 8-pin SOIC and contains two amplifier channels.
What are the key specifications of LT1215CS8 that engineers should know?
The LT1215CS8 combines two precision amplifier channels, a 23 MHz gain-bandwidth product, and a 50 V/µs slew rate in an 8-pin SOIC package. The manufacturer identifies the LT1215 as a single-supply device, and cross-reference information lists its supply range as 2.5 V to 36 V. These characteristics position it for instrumentation, active filtering, and other analog signal-conditioning circuits requiring more bandwidth than a conventional precision op amp.
Where can I download the LT1215CS8 datasheet PDF?
The official LT1215 datasheet and product information can be found on the Analog Devices product page at https://www.analog.com/en/products/lt1215.html. The datasheet contains the authoritative electrical characteristics, package drawings, and pin descriptions needed to verify the LT1215CS8 implementation. The LT1215CS8 is also associated with an 8-SOIC package, so engineers should confirm the pinout against the package drawing before laying out the PCB.
Where can I find the LT1215CS8 pinout?
Use the pin-description table and package drawing in the Analog Devices LT1215 datasheet to locate the LT1215CS8 pinout. The distributor descriptions identify the LT1215CS8 as an 8-SOIC, dual-amplifier device, but they do not provide a complete pin-name table. The manufacturer datasheet is therefore the correct reference for assigning power, ground, input, and output connections for each channel.
What is the difference between LT1215CS8 and LT1216?
The LT1215CS8 contains two amplifier channels, while the LT1216 is the quad version of the same amplifier family. Analog Devices describes both parts as single-supply precision amplifiers, while highlighting the LT1215’s 23 MHz gain-bandwidth product and 50 V/µs slew rate. Because the channel count and package pin count differ, the LT1216 is not a pin-for-pin substitute for the 8-pin LT1215CS8.
Is the LT1215CS8 suitable for instrumentation applications?
Yes, the LT1215CS8 is suitable for instrumentation and precision analog signal conditioning. Its manufacturer-described combination of DC precision, a 23 MHz gain-bandwidth product, and a 50 V/µs slew rate supports closed-loop amplifier designs beyond the speed of a basic precision op amp. Confirm the input common-mode range, offset voltage, bias current, and noise requirements against the smallest signal being measured before finalizing the circuit.
What is the supply voltage range of LT1215CS8?
The LT1215CS8 operates from 2.5 V to 36 V according to the published cross-reference specifications for the device. Analog Devices identifies the LT1215 as a single-supply precision amplifier. The usable signal range can nevertheless be narrower than the supply range because the amplifier must also remain within its specified input common-mode limits under every operating condition.
Can LT1215CS8 operate from a single 5 V supply?
A 5 V supply is within the published 2.5 V to 36 V supply-voltage range for the LT1215CS8. The device is designed for single-supply operation, allowing the output to approach the lower supply rail subject to the manufacturer’s output-swing and common-mode specifications. Decouple the supply pins locally and ensure that signal amplitudes remain inside the amplifier’s specified common-mode input range.
What can replace the LT1215CS8?
A valid replacement for the LT1215CS8 must be a pin-compatible dual precision amplifier in the same 8-SOIC footprint with compatible supply, common-mode, offset, bandwidth, slew-rate, and stability characteristics. Packaging suffixes such as lead-free or tape-and-reel variants may identify the same electrical device, but they are not engineering alternatives. Use the manufacturer datasheet and an approved component cross-reference to validate any replacement.
Is LT1215CS8 the same as LT1216?
No. The LT1215CS8 is a dual amplifier in an 8-SOIC package, whereas the LT1216 is a quad amplifier in the same broader LT1215/LT1216 product family. Their channel counts and package pin counts differ, so the LT1216 cannot replace the LT1215CS8 without changing the PCB layout. The two parts share the family’s single-supply precision-amplifier positioning.
When should I choose LT1215CS8 over a lower-bandwidth precision op amp?
Choose the LT1215CS8 when the signal path needs more closed-loop bandwidth or slew capability than a conventional precision amplifier provides. The LT1215’s 23 MHz gain-bandwidth product and 50 V/µs slew rate are the principal distinctions. Its 250 µV listed input offset voltage should also be checked against the accuracy required by the application.
Where can I buy LT1215CS8 online?
Use the Request a Quote form on this page to request LT1215CS8 availability, lead time, and order handling through XAIPART. The form is the appropriate route for current commercial information and avoids presenting a static price that may no longer reflect the market. For technical confirmation, identify the exact 8-SOIC ordering variant required by the production BOM.
What is the price of LT1215CS8?
Current LT1215CS8 pricing is available through the Request a Quote form on this page. Quote requests confirm the exact device suffix, quantity, shipment destination, and current commercial terms. The product page intentionally does not embed a static price because market pricing and component availability can change independently of the technical specifications.
What is the lead time for LT1215CS8?
Request the current LT1215CS8 lead time through the Request a Quote form on this page. The lead-time confirmation should include the required package suffix, quantity, and delivery destination so that production planning reflects the intended configuration. For an obsolete-grade substitution, request the specific replacement MPN rather than relying only on the base device name.
Is LT1215CS8 in stock?
Submit an LT1215CS8 stock and availability request through the Request a Quote form on this page. The response should confirm the current status and quantity for the exact ordering suffix required by the BOM. This is the most reliable method for a production decision because inventory can change rapidly between quote requests.
How should I decouple and lay out an LT1215CS8 circuit?
Place the LT1215CS8 bypass capacitors directly beside the supply and ground pins, with the shortest possible ground return path. Keep sensitive amplifier inputs away from noisy switching nodes and route high-impedance nodes with minimal parasitic capacitance. Because the device supports 50 V/µs slew rate, use short, controlled feedback paths and account for parasitic loading when selecting compensation or filtering components.

کے لیے انجینئرنگ ریفرنس ڈیٹا LT1215CS8 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the LT1215CS8 when a design requires a dual precision amplifier with more bandwidth and slew capability than a conventional precision op amp. Its 23 MHz gain-bandwidth product and 50 V/µs slew rate are useful in instrumentation, active filtering, sample-and-hold circuitry, and feedback-control networks. Select the related LT1216 only when four channels are needed; its package and pin count differ, so it is not a drop-in choice for the 8-pin LT1215CS8. No pin-compatible replacement is included because the cross-reference results do not identify a distinct device with the same 8-SOIC footprint and equivalent electrical characteristics. For an alternate-source design, use an approved parametric cross-reference and verify pin assignments, common-mode range, offset, bias current, noise, stability, and lifecycle status before releasing the schematic or PCB.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ
Brand Analog Devices
Package 8-SOIC (0.154 inch, 3.90 mm width)
Number of Channels 2
Amplifier Type Precision operational amplifier
Supply Type Single supply
Minimum Supply Voltage 2.5 V
Maximum Supply Voltage 36 V
Gain-Bandwidth Product 23 MHz
Slew Rate 50 V/µs
Input Offset Voltage 250 µV
Output Current per Channel 50 mA

اہم امتیازی خصوصیات

  • Higher speed than a conventional precision amplifier (بمقابلہBasic precision op amp)
  • Two precision channels in a compact package (بمقابلہDiscrete single-amplifier implementation)
  • Single-supply operation with a broad published range (بمقابلہDual-supply-only amplifier implementation)

ڈیزائن نوٹس

Place the LT1215CS8 bypass capacitors directly beside the supply and ground pins, and use the shortest possible ground return. Keep sensitive input and feedback traces away from switching-node copper and other high-impedance leakage paths. The 50 V/µs slew rate can make long routing and excessive capacitive loading more influential than they would be in a slow precision amplifier.

Account for parasitic capacitance in the feedback network because the LT1215 provides a 23 MHz gain-bandwidth product and a 50 V/µs slew rate. Probe grounding and long feedback loops can reduce phase margin or produce unexpected ringing at high frequency. Use short, symmetrical routing where practical and verify stability with the actual source and load impedances.

Do not treat the 2.5 V to 36 V supply range as the complete allowable signal range. The input common-mode voltage must remain within the manufacturer’s operating limits, and the output must meet its swing requirements under the intended load. Check the offset, bias-current, and noise specifications against the accuracy budget of high-impedance or low-level sensor measurements.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

Compliance status must be confirmed for the exact ordering suffix using the manufacturer product documentation and declaration.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-09 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

LT1215CS8 datasheet LT1215CS8 datasheet pdf LT1215CS8 pinout LT1215CS8 specifications LT1215CS8 equivalent LT1215CS8 replacement LT1215CS8 cross reference LT1215CS8 8-SOIC LT1215CS8 application circuit LT1215CS8 price LT1215CS8 stock Analog Devices LT1215CS8 LT1215CS8 vs LT1216 LT1215 23MHz op amp LT1215 single supply amplifier

متعلقہ اجزاء اور اصطلاحات

Analog Devices Linear Technology LT1215CS8 LT1215 LT1216 precision operational amplifier dual amplifier single-supply amplifier signal-conditioning IC active filter instrumentation amplifier 23 MHz gain-bandwidth product 50 V/µs slew rate 250 µV input offset voltage 2.5 V minimum supply voltage 36 V maximum supply voltage 8-SOIC SOIC package family surface-mount package sample-and-hold circuit feedback control SMD
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں