Analog Devices

LT6200CS8 - 165MHz Low-Noise Rail-to-Rail Op Amp | ADI

MPN: LT6200CS8 ✓ فعال
2.5 V Vdss 8-pin SOIC Package
MOQ: 1 |

LT6200CS8 جائزہ

Analog Devices LT6200CS8 is a single, unity-gain-stable operational amplifier with a 165 MHz gain-bandwidth product, 0.95 nV/√Hz input-noise density, and a 50 V/μs slew rate, packaged in an 8-pin SOIC. The device accepts a supply voltage from 2.5 V to 12.6 V and supports rail-to-rail input and output operation. These characteristics make it suitable for precision signal conditioning, low-noise filtering, instrumentation, and high-speed analog feedback systems.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its input terminals while providing high open-loop gain, negative feedback control, and signal buffering. The LT6200 belongs to the high-speed voltage-feedback amplifier family within the broader amplifier IC and analog signal-processing hierarchy. Its combination of wide bandwidth, low noise, high slew rate, and rail-to-rail behavior is useful when a circuit must preserve small signal details while operating close to its supply rails.

The LT6200’s principal features include 165 MHz gain-bandwidth, 0.95 nV/√Hz noise density, 50 V/μs slew rate, rail-to-rail input and output, and unity-gain stability. The low input-noise density benefits instrumentation and audio-frequency filtering, while the 165 MHz bandwidth enables wideband closed-loop implementations. Unity-gain stability also permits direct voltage-following use without requiring a compensating network for a basic follower configuration.

The device is specified for a 2.5 V minimum supply and 12.6 V maximum supply, enabling operation from low-voltage systems through standard higher-voltage analog rails. Its reported 2.5 μV input-offset voltage supports accurate DC amplification, while the 50 V/μs slew rate allows comparatively large signal transitions to be reproduced without excessive slew distortion. Designers must still account for input common-mode range, output swing, stability, and the bandwidth required by each feedback topology when operating near rail limits.

Typical uses include low-level sensor amplifiers, active filters, analog instrumentation, audio preamplifiers, and high-speed signal-conditioning stages. The LT6200CS8 is particularly appropriate when a designer needs low noise and wide bandwidth from a single-amplifier, 8-pin SOIC solution. In filter and instrumentation circuits, the combination of 165 MHz gain-bandwidth and 0.95 nV/√Hz noise supports accurate signal processing while limiting the component count compared with a multistage implementation.

PCB layout and stability are central to achieving the LT6200’s rated performance. Keep input, feedback, and output paths short, place compensation and decoupling components close to their pins, and provide a low-impedance ground reference. Because high-speed amplifiers can amplify small parasitic signals, stable reference planes and careful component placement are as important as nominal resistor and capacitor selection.

This product overview combines the LT6200 family’s principal electrical characteristics, package information, application guidance, and drop-in alternatives. It is intended to help engineers identify whether the LT6200CS8 satisfies a bandwidth, noise, slew-rate, supply-voltage, and package requirement before committing a design to the 8-pin SOIC footprint.

کے لیے ڈراپ اِن متبادل LT6200CS8 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

LT6200CS8#PBF

✅ ڈراپ-اِن
📦 8-pin SOIC
Lead-free ordering option with 0% change to the stated 165 MHz bandwidth, 0.95 nV/√Hz noise density, and 12.6 V maximum supply voltage

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

LT6200CS8#TR

✅ ڈراپ-اِن
📦 8-pin SOIC
Tape-and-reel ordering option with 0% difference in the documented 165 MHz bandwidth, 50 V/μs slew rate, and 8-pin package

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

LT6200CS8-5#TRPBF

✅ ڈراپ-اِن
📦 8-pin SOIC
Same 8-pin family package; verify the -5 grade-specific parameters against the manufacturer datasheet before substitution

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

LT6200CS8-10#PBF

✅ ڈراپ-اِن
📦 8-pin SOIC
Same 8-pin family package; verify the -10 grade-specific parameters against the manufacturer datasheet before substitution

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

LT6202CS8

✅ ڈراپ-اِن
📦 8-pin SOIC
Same family and 8-pin SOIC package; the LT6202 is the lower-bandwidth family option, so compare gain-bandwidth and slew rate before substitution

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

LT6200CS8 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Number of Amplifiers 1 amplifier
Gain-Bandwidth Product 165 MHz
Input Noise Density 0.95 nV/√Hz
Slew Rate 50 V/μs
Minimum Supply Voltage 2.5 V
Maximum Supply Voltage 12.6 V
Input Offset Voltage 2.5 μV
Input Common-Mode Type Rail-to-Rail
Output Swing Type Rail-to-Rail
Gain Configuration Unity gain stable
ٹوپولوجی Voltage-feedback operational amplifier
Primary Device Category Single operational amplifier
پیکیج 8-pin SOIC
ماؤنٹنگ ٹائپ Surface mount

LT6200CS8 8-pin soic پن کنفیگریشن گائیڈ

LT6200CS8 (8-pin soic پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

LT6200CS8 کے لیے 8-pin soic پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں LT6200CS8.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

LT6200CS8 کے لیے موزوں ہے 6 ایپلیکیشنs: Low-Noise Sensor Instrumentation, Wideband Active Filtering, High-Speed Data Acquisition, Audio Preamplifier, Precision Analog Signal Conditioning, Pulse and Edge Shaping.

🏭

Low-Noise Sensor Instrumentation

The LT6200CS8 fits precision sensor front ends that require low input noise, low offset, and enough bandwidth for useful signal conditioning. Its 0.95 nV/√Hz input-noise density and 2.5 μV input-offset specification reduce errors when amplifying low-level sensor outputs, while the 165 MHz gain-bandwidth permits moderate closed-loop bandwidth. Rail-to-rail input operation helps preserve usable signal range near the supply rails. In a typical inverting or non-inverting amplifier, the feedback network should account for sensor source impedance, and the PCB should use short input paths to minimize parasitic pickup.

🌐

Wideband Active Filtering

The LT6200CS8 is useful in active-filter stages where both signal fidelity and transition-band width matter. A 165 MHz gain-bandwidth product provides design headroom for moderate closed-loop gains, and the 50 V/μs slew rate helps preserve large-signal behavior when the filter must handle transients. The 0.95 nV/√Hz noise density can support low-amplitude filter stages where resistor-generated noise would otherwise dominate. Component tolerances, op-amp open-loop gain, and parasitic capacitance should be evaluated together, and prototype networks should be checked for unintended peaking or oscillation.

🖥️

High-Speed Data Acquisition

The LT6200CS8 can serve as the gain or buffer stage in a data-acquisition path that must preserve fast input transitions. Its 165 MHz gain-bandwidth product and 50 V/μs slew rate allow meaningful operating bandwidth at moderate closed-loop gain, while rail-to-rail input and output behavior supports systems using the available supply range. An ADC driver design must still verify settling time, output swing, ADC input range, and capacitive loading. Use a compact, grounded layout and place feedback components close to the amplifier to prevent high-frequency parasitic feedback.

🎧

Audio Preamplifier

The LT6200CS8 is appropriate for low-noise audio preamplification when the circuit needs more bandwidth than a general-purpose op amp provides. Its 0.95 nV/√Hz input-noise density supports small-signal amplification, while the 165 MHz gain-bandwidth product leaves substantial margin for audio-band closed-loop gain and filtering. The 50 V/μs slew rate helps reproduce larger transients with low distortion. Designers should check output swing into the next stage, configure the gain safely, and use short input traces to prevent added noise and electromagnetic pickup.

🔧

Precision Analog Signal Conditioning

The LT6200CS8 supports general precision signal-conditioning tasks that combine low offset with wide bandwidth. Its 2.5 μV input-offset specification is useful for near-DC amplification, while the 165 MHz gain-bandwidth product allows feedback networks to retain useful closed-loop bandwidth. Rail-to-rail input and output behavior simplifies interfacing across much of the operating supply range. For instrumentation, evaluate bias-current error against source resistance, confirm the output operating point, and provide clean reference and return paths to prevent supply or ground noise from entering the signal chain.

⚡

Pulse and Edge Shaping

The LT6200CS8 is well suited to pulse conditioning, edge shaping, and fast thresholding circuits because its 50 V/μs slew rate reduces timing distortion on rapid transitions. The 165 MHz gain-bandwidth product provides adequate open-loop dynamics for common noninverting, inverting, and comparator-style feedback arrangements. Rail-to-rail output operation helps maximize available signal swing, although load current and output-voltage limits remain important. Keep feedback-loop delay small, avoid excessive capacitive loading, and verify output rise and fall behavior with the actual source and load conditions.

تجویز کردہ پروڈکٹس کا خلاصہ

LT6200CS8 Analog Devices استعمال ہوتا ہے: Low-Noise Sensor Instrumentation, Wideband Active Filtering, High-Speed Data Acquisition, Audio Preamplifier, Precision Analog Signal Conditioning, Pulse and Edge Shaping LT6201CS8 Dual-family companion for multichannel instrumentation استعمال ہوتا ہے: Low-Noise Sensor Instrumentation, Wideband Active Filtering, High-Speed Data Acquisition, Audio Preamplifier, Precision Analog Signal Conditioning, Pulse and Edge Shaping LT6202CS8 Lower-bandwidth family option استعمال ہوتا ہے: Low-Noise Sensor Instrumentation, Wideband Active Filtering, High-Speed Data Acquisition, Audio Preamplifier, Precision Analog Signal Conditioning, Pulse and Edge Shaping
What are the key specifications of LT6200CS8 that engineers should know?
The LT6200CS8 combines a 165 MHz gain-bandwidth product, 0.95 nV/√Hz input-noise density, and a 50 V/μs slew rate in a unity-gain-stable 8-pin SOIC. According to the Analog Devices LT6200 product page and manufacturer datasheet, it also supports rail-to-rail input and output operation, accepts a 2.5 V to 12.6 V supply, and has a 2.5 μV input-offset specification. These parameters make it suitable for low-noise, wideband analog signal conditioning.
Where can I download the LT6200CS8 datasheet PDF?
The official LT6200 family information and datasheet are available from the Analog Devices product page at https://www.analog.com/en/products/lt6200.html. The LT6200CS8 is the 8-pin SOIC ordering option in that family. Use the manufacturer’s pin-description table and electrical-characteristics tables when assigning PCB connections, selecting feedback components, and confirming operating limits.
Where can I find the LT6200CS8 pinout and package information?
The LT6200CS8 uses an 8-pin SOIC package, and its manufacturer pinout should be taken from the pin-description table in the official LT6200 datasheet. Use that table when routing the amplifier inputs, supply rails, output, and exposed package features. The family product page also provides package and ordering information, but the datasheet remains the controlling source for production board design.
Is the LT6200CS8 rail-to-rail input and output?
Yes, the LT6200CS8 supports rail-to-rail input and output operation. According to the Analog Devices product description, this behavior allows the amplifier to process input signals near the supply rails and provides improved output swing versus a conventional non-rail-to-rail amplifier. Output headroom still depends on load current and supply voltage, so use the manufacturer’s output-swing specifications when driving heavy loads.
What is the gain-bandwidth and noise performance of the LT6200CS8?
The LT6200CS8 has a 165 MHz gain-bandwidth product and an input-noise density of 0.95 nV/√Hz. According to the Analog Devices LT6200 product page and manufacturer datasheet, the low-noise figure is valuable for precision filtering and instrumentation, while the wide bandwidth supports high-speed closed-loop designs. Actual usable bandwidth also depends on the selected feedback topology and the required gain.
How fast is the LT6200CS8 slew rate?
The LT6200CS8 has a 50 V/μs slew rate, as specified by Analog Devices. This allows the amplifier to reproduce large-amplitude signal transitions quickly, making it useful for wideband filters, pulse and edge shaping, and high-speed feedback loops. For sine-wave applications, the maximum frequency before slew-rate distortion becomes important should be calculated from the required output amplitude.
What supply-voltage range does the LT6200CS8 operate from?
The LT6200CS8 operates from a minimum supply voltage of 2.5 V to a maximum supply voltage of 12.6 V. According to the manufacturer datasheet, the device also supports rail-to-rail input and output behavior. Designers should verify the selected output operating point against the specified common-mode and output-swing limits rather than assuming the full supply range is usable at every output voltage.
Can the LT6200CS8 be used as a unity-gain voltage follower?
Yes, the LT6200CS8 is unity-gain stable and can be configured as a voltage follower by connecting the output directly to the inverting input. According to the Analog Devices LT6200 family documentation, its 165 MHz gain-bandwidth and 50 V/μs slew rate remain useful in this topology. PCB layout should still minimize feedback-loop length and keep output loading away from sensitive input nodes.
LT6200CS8 versus LT6202CS8: which is better for a high-speed filter?
The LT6200CS8 is the better choice when maximum bandwidth and slew rate are priorities because it provides a 165 MHz gain-bandwidth product and 50 V/μs slew rate. The LT6202CS8 appears in the family cross-reference results but its manufacturer-specific electrical differences must be checked against the LT6202 datasheet before substitution. Both use the family’s small-outline amplifier package, but matching package alone does not guarantee equivalent dynamic performance.
When should I choose the LT6200CS8 instead of a lower-bandwidth op amp?
Choose the LT6200CS8 when the design needs more than a general-purpose amplifier’s bandwidth, particularly for wideband active filters, precision instrumentation, or signal paths with fast transitions. Its 165 MHz gain-bandwidth, 50 V/μs slew rate, and 0.95 nV/√Hz noise density provide measurable advantages over lower-bandwidth amplifiers. The trade-off is greater sensitivity to layout, parasitics, and stability requirements.
Is the LT6200CS8 suitable for precision sensor instrumentation?
The LT6200CS8 is suitable for many precision sensor-amplifier applications because it combines 2.5 μV input offset with 0.95 nV/√Hz noise density and rail-to-rail input operation. According to the manufacturer datasheet, the 165 MHz bandwidth provides additional capability for filtering and signal conditioning. Sensor excitation frequency, source impedance, input bias current, and common-mode range must also be checked before finalizing the circuit.
What can replace the LT6200CS8 without changing the PCB footprint?
The LT6200CS8#PBF is a same-footprint, 8-pin SOIC ordering option identified by the manufacturer and distributor listings, while LT6202CS8 is a family candidate that requires parameter verification. Use the Request a Quote form on this page for current sourcing information. Confirm the complete pin description, supply range, offset, bandwidth, noise, stability, and output behavior in the candidate’s datasheet before approving a replacement.
What is the best Analog Devices equivalent for the LT6200CS8?
The closest documented ordering option is the LT6200CS8#PBF because it represents the same LT6200 family device in the same 8-pin SO format. The LT6202CS8 is another family member listed in cross-reference results, but it should not be treated as an automatic substitute because its detailed electrical ratings may differ. Compare the official LT6200 and candidate datasheets before making a drop-in decision.
Where to buy LT6200CS8 online?
Use the Request a Quote form on this XAIPART page to inquire about LT6200CS8 availability, order quantity, and lead time. The request identifies the exact 8-pin SOIC ordering code, reducing the risk of receiving a different package or grade. The manufacturer product page and distributor listings can be used as technical references, but current commercial availability should be confirmed through the quotation form.
What is the price and lead time of the LT6200CS8?
Current price, stock, and lead time for the LT6200CS8 should be requested through the Request a Quote form on this page. Quote-based confirmation is appropriate because commercial terms can vary with quantity, packaging, and market conditions. For technical substitution, provide the required bandwidth, noise, supply voltage, and package information so the quotation covers the exact 8-pin SOIC device.

کے لیے انجینئرنگ ریفرنس ڈیٹا LT6200CS8 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the LT6200CS8 when a single-amplifier design needs low noise, high bandwidth, fast slew response, and rail-to-rail signal handling in an 8-pin SOIC. It is a strong fit for precision instrumentation, wideband filters, sensor conditioning, data-acquisition buffers, and audio preamplifiers. Select LT6200CS8#PBF when the required commercial ordering designation calls for the lead-free part, and select LT6200CS8#TR when tape-and-reel handling is required. The -5 and -10 family options may serve grade-specific requirements, but their exact electrical characteristics must be confirmed in the manufacturer datasheet. Consider LT6202CS8 when its lower-bandwidth behavior is sufficient and the application does not require the LT6200CS8’s 165 MHz gain-bandwidth or 50 V/μs slew rate. For every substitution, verify the pin description, supply range, offset, noise, stability, output swing, and load behavior before production release.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ LT6200CS8#PBF LT6200CS8#TR LT6200CS8-5#TRPBF LT6200CS8-10#PBF LT6202CS8
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Number of Amplifiers 1 amplifier 1 amplifier 1 amplifier 1 amplifier 1 amplifier 1 amplifier

اہم امتیازی خصوصیات

  • Wide bandwidth for a low-noise single amplifier (بمقابلہLT6202CS8)
  • Fast large-signal response (بمقابلہLT6202CS8)
  • Low-noise operation in a small 8-pin SOIC (بمقابلہLT6200CS8#PBF)

ڈیزائن نوٹس

Place feedback resistors and compensation capacitors directly beside the amplifier pins. Keep the inverting-input node and output trace short, especially when the closed-loop gain is high, because parasitic capacitance can alter frequency response or create instability. Route supply and ground connections on low-impedance planes, place decoupling capacitance close to the device, and maintain a continuous ground reference beneath the circuit.

Do not treat the full 2.5 V to 12.6 V supply range as an unrestricted output range. Check the manufacturer’s input common-mode limits, output-swing curves, and load-current behavior against the intended waveform. Rail-to-rail operation reduces signal-range restrictions, but it does not guarantee full output swing at maximum frequency or heavy capacitive loading. Verify these limits in the LT6200 datasheet before setting gain and signal levels.

The LT6200CS8’s 165 MHz gain-bandwidth and 50 V/μs slew rate make small parasitic capacitances and long loops electrically significant. Use short, direct signal paths, avoid routing the sensitive input next to switching nodes, and use a solid ground plane under the feedback network. When driving capacitive loads, evaluate isolation-resistor or alternative-driver methods rather than assuming the amplifier can drive the load directly.

Supply bypassing should be placed at the device so the high-frequency current path has minimum inductance. Select capacitors according to the datasheet’s recommendations and the impedance required over the signal bandwidth. Check that the power source can support the amplifier’s dynamic output current, especially when the 50 V/μs slew rate drives a low-amplitude, high-frequency signal into a capacitive or resistive load.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The LT6200CS8#PBF ordering designation identifies a lead-free part, but no explicit RoHS, REACH, halogen-free, or conflict-minerals declaration was available for this exact ordering code.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-19 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

lt6200cs8 pbf LT6200CS8 datasheet LT6200CS8 pinout LT6200CS8 datasheet pdf LT6200CS8 schematic LT6200CS8 equivalent LT6200CS8 replacement LT6200CS8 cross reference LT6200CS8 vs LT6202CS8 LT6200CS8 165MHz amplifier LT6200CS8 8-pin SOIC Analog Devices LT6200CS8

متعلقہ اجزاء اور اصطلاحات

Analog Devices LT6200CS8 LT6200CS8#PBF LT6200CS8#TR LT6200CS8-5#TRPBF LT6200CS8-10#PBF LT6202CS8 LT6201CS8 operational amplifier single amplifier voltage-feedback amplifier unity-gain stable rail-to-rail input rail-to-rail output gain-bandwidth product input noise density slew rate input offset voltage 8-pin SOIC SOIC package family surface-mount package low-noise amplification active filter sensor instrumentation
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں