M2GL025TS-VF256 - 27.6K LEs, 138 I/O IGLOO2 FPGA | Microchip
MPN: M2GL025TS-VF256 ✓ فعالM2GL025TS-VF256 جائزہ
An FPGA is a programmable semiconductor in which both the logic configuration and I/O behavior are established after manufacturing. Within the broader programmable-logic hierarchy, an FPGA sits above fixed-function logic and below system-level programmable devices. IGLOO2 combines non-volatile on-chip configuration flash, low-power operation, and deterministic I/O resources for bridging, control-plane, interface-conversion, security, and image-processing functions.
The principal feature set includes 27.6K logic elements, 138 I/O, embedded configuration memory, and a 256-ball LFBGA package with a stated 0.8 mm ball pitch. The 138 available I/O provide substantial connectivity for parallel buses, control signals, serial interfaces, memory interfaces, and external converters. Unlike a fixed-function microcontroller, the IGLOO2 architecture allows logic timing, interface widths, and peripheral functionality to be updated through a new configuration image.
The M2GL025TS designation places this device in the standard-voltage IGLOO2 family. Its stated supply range of 1.14 V to 2.625 V spans typical low-voltage core and I/O operating regions. Designers must account for the I/O voltage relationship when connecting the device to external logic: bank power must not exceed the voltage tolerated by the connected interface, even when the core supply is operating normally.
Typical applications include industrial bridge and protocol-conversion logic, secure connectivity, control-plane functions, video and image processing pipelines, I/O expansion, and general-purpose embedded control. Its combination of 138 I/O and 27.6K logic elements is useful when a fixed microcontroller lacks enough parallel I/O or when a programmable interface must support several connector formats without requiring a larger device.
The 256-LFBGA package demands careful PCB planning. Use the Microchip IGLOO 2 Packaging and Pin Descriptions User Guide to assign power, ground, configuration, clock, and user I/O pins. Confirm every ball location, bank voltage, decoupling requirement, and exposed thermal strategy against the manufacturer documentation before fabrication.
This product page combines the exact MPN identification, verified package information, application guidance, engineering considerations, and directly related IGLOO 2 options. It is intended to accelerate component selection, footprint review, sourcing, and first-pass board planning for engineers working with the M2GL025TS-VF256.
کے لیے ڈراپ اِن متبادل M2GL025TS-VF256 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
M2GL025TS-VF256I
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
M2GL025TS-1VF256I
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
M2GL025TS-1VF256
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
M2GL025TS-1VFG256
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
M2GL025TS-1VFG256T2
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
M2GL025TS-VF256 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Device Type | IGLOO2 low-density FPGA |
| Logic Elements | 27.6K LEs |
| User I/O Count | 138 I/O |
| Supply Voltage Range | 1.14 V to 2.625 V |
| پیکیج | 256-LFBGA |
| Ball Pitch | 0.8 mm |
| ماؤنٹنگ ٹائپ | Surface mount |
| Configuration Memory | Embedded flash configuration |
| Device Series | M2GL025TS |
| Programmable Logic Type | Field-programmable gate array |
| RoHS اسٹیٹس | RoHS listed |
| Package Ball Count | 256 balls |
M2GL025TS-VF256 256 balls پن کنفیگریشن گائیڈ
M2GL025TS-VF256 (256 balls پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں M2GL025TS-VF256.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
M2GL025TS-VF256 کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Protocol Bridging, Secure Connectivity and Control, Video and Image Processing, Network Control Plane, I/O Expansion and Signal Conversion, Embedded Flash Storage Control.
Industrial Protocol Bridging
The M2GL025TS-VF256 fits industrial protocol-bridge designs that need to combine legacy parallel interfaces with newer serial links. Its 27.6K logic elements can support state machines, width conversion, buffering, and timing control, while 138 I/O provide ample connections for control signals and multiple buses. The device can be placed between sensors, actuators, and communication processors to translate data formats without changing the external equipment. The 1.14 V to 2.625 V operating range suits low-voltage systems, but each I/O bank must be assigned a compatible supply. The 256-LFBGA layout also requires fine-pitch escape routing and careful plane construction.
تجویز کردہ
Secure Connectivity and Control
The M2GL025TS-VF256 is appropriate for secure-connectivity and system-control functions requiring programmable logic around a processor or communication engine. The 27.6K LEs provide capacity for protocol checks, command sequencing, authentication-related control logic, and data routing, while the 138 I/O can connect status, interrupt, reset, and interface signals. Embedded flash configuration supports configuration retention without a separate programming arrangement for each board revision. In a secure system, the FPGA should still be integrated with the appropriate key-storage and security-control architecture rather than treated as a standalone cryptographic device. Its 256-LFBGA footprint must be checked against connector density and assembly capability.
تجویز کردہ
Video and Image Processing
The M2GL025TS-VF256 can serve as a compact programmable pipeline for video or image preprocessing in embedded equipment. Its 27.6K logic elements are suitable for parallel pixel operations, timing generation, data alignment, and interface isolation when the complete algorithm fits the available fabric. The 138 I/O allow multiple parallel data paths to be connected without relying entirely on scarce board area, and the 1.14 V to 2.625 V range supports low-voltage processing architectures. Designers should constrain input and output timing to the selected speed grade and account for the 256-LFBGA escape-routing burden. External memory interfaces must also be checked against the device's bank structure and supported I/O standards.
تجویز کردہ
Network Control Plane
The M2GL025TS-VF256 is suitable for network and control-plane logic that must monitor commands, arbitrate access, or translate packet formats. The 27.6K LEs provide enough programmable resources for queues, header processing, status tracking, and administrative interfaces, while 138 I/O facilitate parallel backplane or processor connections. Its embedded flash configuration allows controlled field updates of the logic image, provided the system includes suitable update and recovery procedures. In networking equipment, power integrity and clock quality are as important as logic capacity: isolate switching supplies, return every high-speed signal over a continuous reference plane, and validate timing for the selected -1 or standard speed grade.
تجویز کردہ
I/O Expansion and Signal Conversion
The M2GL025TS-VF256 is well suited to expanding a controller's electrical interface capacity. The 138 user I/O can support data buses, chip selects, clocks, handshakes, and programmable conversion logic, while the 27.6K LEs implement buffering and format adaptation. This arrangement is useful in legacy equipment where the host processor has too few pins for displays, storage, converters, or external sensors. Bank-level voltage planning is essential because the 1.14 V to 2.625 V device range does not imply that every bank can use any voltage simultaneously. The fine-pitch 256-LFBGA package should be matched to an assembly process capable of placing and inspecting all 256 balls.
تجویز کردہ
Embedded Flash Storage Control
The M2GL025TS-VF256 can act as the control and signal-conditioning element for external non-volatile storage in an embedded system. Its programmable logic can coordinate flash commands, address generation, status monitoring, error handling, and host-side buffering, while 138 I/O provide flexible connections among the memory device, controller, and supervisory logic. The IGLOO2 family's embedded flash configuration supports a stable boot or update architecture, although the application flash remains a separate external device. Firmware and hardware teams should divide deterministic initialization, wear management, and recovery responsibilities carefully. High-speed memory signals require short, impedance-controlled routes through the 256-LFBGA footprint.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا M2GL025TS-VF256 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | M2GL025TS-VF256I | M2GL025TS-1VF256I | M2GL025TS-1VF256 | M2GL025TS-1VFG256 |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 256-LFBGA | 256-LFBGA | 256-LFBGA | 256-LFBGA | 256-ball LFBGA family |
| Logic Elements | 27.6K LEs | 27.6K LEs | 27.6K LEs | 27.6K LEs | 27.6K LEs |
| User I/O | 138 I/O | 138 I/O | 138 I/O | 138 I/O | 138 I/O |
| Speed Grade | Standard | Standard | -1 | -1 | -1 |
| Temperature Suffix | Standard | Industrial | Industrial | Standard | Standard |
| Configuration Technology | Embedded flash | Embedded flash | Embedded flash | Embedded flash | Embedded flash |
اہم امتیازی خصوصیات
- Balanced logic and I/O capacity (بمقابلہM2GL050-1VF400)
- Standard-speed baseline with an industrial-temperature counterpart (بمقابلہM2GL025TS-VF256I)
- Timing headroom through a -1 speed-grade option (بمقابلہM2GL025TS-1VF256)
ڈیزائن نوٹس
Use the Microchip IGLOO 2 Packaging and Pin Descriptions User Guide as the controlling document for the 256-LFBGA footprint. Confirm each ball location, power domain, ground connection, configuration pin, clock pin, and user I/O before routing. Because the package uses a 0.8 mm ball pitch, fanout and escape routing should be validated with the intended PCB stackup and assembly process rather than copied from a generic BGA footprint.
Plan a low-impedance power-distribution network for the 1.14 V to 2.625 V operating range and assign every I/O bank a compatible voltage. Place the manufacturer-recommended bulk and high-frequency decoupling capacitors at the associated supply balls, and keep switching-converter loops away from clock and sensitive input pins. Verify startup, power-down, and I/O-state behavior for external devices connected to the 138 I/O because a powered FPGA does not automatically guarantee safe bus behavior during configuration.
Constrain all interface timing to the selected speed grade and route high-speed signals over continuous reference planes with short return paths. The 27.6K logic elements and 138 I/O provide flexibility, but timing closure still depends on trace length, loading, connector geometry, and clock distribution. Use the device's dedicated clock resources where appropriate, avoid routing sensitive signals across plane splits, and simulate channel loss, crosstalk, and terminations for external connections.
Do not treat an M2GL025TS suffix change as automatically interchangeable. The -1, I, G, and T2 suffixes can affect speed, temperature, or package ordering characteristics, and the 256-ball count alone does not prove a compatible ball map. Before releasing an alternate MPN, compare the ordering guide, package drawing, pin descriptions, configuration method, supported I/O standards, and operating-temperature requirements. This prevents a nominal footprint match from becoming an electrical or qualification mismatch.
تعمیل کی معلومات
The exact target listing identifies the device as RoHS compliant. The separately documented automotive Grade 2 family covers -40 °C to 125 °C junction temperature, but that document does not establish AEC-Q100 qualification for this exact non-automotive suffix.