M30624FGPFP#U3C - 16-Bit 24MHz 256KB Flash MCU 100-QFP | Renesas
MPN: M30624FGPFP#U3C ✗ اختتامِ زندگیM30624FGPFP#U3C جائزہ
What is a 16-bit microcontroller (MCU)? A microcontroller is a single integrated circuit that combines a CPU core, program memory (ROM/FLASH), working memory (RAM), and programmable peripherals on one die. The M16C/60 family belongs to the 16-bit CISC MCU category - sitting hierarchically between 8-bit legacy controllers (8051, PIC16) and modern 32-bit ARM Cortex-M cores - and is widely used in industrial, automotive body, and white-goods applications where deterministic interrupt response, low EMI, and code density matter more than raw MIPS.
Key features of the M30624FGPFP include the high-performance M16C/60 series CPU core with a small, position-independent instruction set, 12 KB of RAM, multi-channel 10-bit A/D converter, multiple timers, UART/SIO/I2C interfaces, watchdog timer, and rich interrupt controller. The 'U3C' suffix indicates the Pb-free I-temp lead-free 100-QFP packaging variant. The 256 KB flash is field-programmable via standard serial programming and supports block-erase plus byte-write operations.
The silicon gate CMOS process yields low power consumption, with multiple idle/sleep modes and a power-down halt state suitable for battery-aware designs. The M16C architecture is engineered for C code efficiency and fast context switches, supported by a uniform 16-bit register file and orthogonally addressed peripherals.
Typical applications include industrial motor control, factory automation sensor nodes, HVAC control boards, automotive body ECUs (non-safety), consumer white goods, and general-purpose embedded control replacing 8-bit MCUs where more code space or analog integration is needed. It is often paired with external EEPROM for parameter storage and CAN/LIN transceivers for vehicle networking.
When designing with this device, route the analog supply (AVCC) separately from the digital supply and decouple with 0.1 µF + 10 µF bulk capacitors near each supply pin. Use the on-chip debugger interface for development and ensure XIN/XOUT traces are short to avoid oscillator noise coupling. The 100-QFP package supports hand-soldering and rework, simplifying prototyping.
This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet - giving engineers a faster procurement and design-in path for the M16C/62P family.
کے لیے ڈراپ اِن متبادل M30624FGPFP#U3C — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں M30624FGPFP#U3C (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Series, Package, A/D Converter, Operating Temperature, Supply Voltage.
M3062LFGPFP#U3C
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
M30624FGPFP#U5C
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →M30624FGPFP#U9C
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
M30624FGPGP
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
M30626SPGP#U3C
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
M30624FGPFP#U3C زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Series | M16C/60 (M16C/62P) |
| Core Processor | M16C/60 Series CPU core |
| Core Size | 16-bit |
| زیادہ سے زیادہ کلاک فریکوئنسی | 24 MHz |
| Program Memory Size | 256 KB (256K x 8) FLASH |
| سپلائی وولٹیج | 3 V / 5 V |
| آپریٹنگ درجہ حرارت | -40 °C to +85 °C (I-temp) |
| پیکیج | 100-QFP (14x20 mm) |
| ماؤنٹنگ ٹائپ | Surface Mount |
| Pb-free | Yes (U3C suffix) |
| A/D Converter | 10-bit, multi-channel |
| Communication Interfaces | UART, SIO, I2C |
| Watchdog Timer | Yes |
| RoHS اسٹیٹس | Compliant |
| Lifecycle | Not Recommended for New Design (per Renesas: use M3062LFGPFP for new systems) |
M30624FGPFP#U3C پن کنفیگریشن
| پن 1 | P8_5/TA1IN — Port 8 bit 5 / Timer A1 input |
| پن 2 | VREF — A/D converter reference voltage input |
| پن 3 | AVCC — Analog supply voltage |
| پن 4 | P10_7/AN7 — Port 10 bit 7 / A/D analog input 7 |
| پن 5 | P10_6/AN6 — Port 10 bit 6 / A/D analog input 6 |
| پن 6 | P10_5/AN5 — Port 10 bit 5 / A/D analog input 5 |
| پن 7 | P10_4/AN4 — Port 10 bit 4 / A/D analog input 4 |
| پن 8 | P10_3/AN3 — Port 10 bit 3 / A/D analog input 3 |
| پن 9 | P10_2/AN2 — Port 10 bit 2 / A/D analog input 2 |
| پن 10 | P10_1/AN1 — Port 10 bit 1 / A/D analog input 1 |
| پن 11 | P10_0/AN0 — Port 10 bit 0 / A/D analog input 0 |
| پن 12 | P9_7/ADTRG — Port 9 bit 7 / A/D trigger input |
| پن 13 | P9_6 — Port 9 bit 6 |
| پن 14 | P9_5 — Port 9 bit 5 |
| پن 15 | P9_4 — Port 9 bit 4 |
| پن 16 | P9_3 — Port 9 bit 3 |
| پن 17 | P9_2 — Port 9 bit 2 |
| پن 18 | P9_1 — Port 9 bit 1 |
| پن 19 | P9_0 — Port 9 bit 0 |
| پن 20 | VSS — Ground |
| پن 21 | P8_7 — Port 8 bit 7 |
| پن 22 | P8_6 — Port 8 bit 6 |
| پن 23 | P8_5 — Port 8 bit 5 |
| پن 24 | P8_4 — Port 8 bit 4 |
| پن 25 | P8_3 — Port 8 bit 3 |
| پن 26 | P8_2 — Port 8 bit 2 |
| پن 27 | P8_1 — Port 8 bit 1 |
| پن 28 | P8_0 — Port 8 bit 0 |
| پن 29 | P7_7/TA3OUT — Port 7 bit 7 / Timer A3 output |
| پن 30 | P7_6/TA3IN — Port 7 bit 6 / Timer A3 input |
| پن 31 | P7_5/TA2OUT — Port 7 bit 5 / Timer A2 output |
| پن 32 | P7_4/TA2IN — Port 7 bit 4 / Timer A2 input |
| پن 33 | P7_3/TA1OUT — Port 7 bit 3 / Timer A1 output |
| پن 34 | P7_2/TA1IN — Port 7 bit 2 / Timer A1 input |
| پن 35 | P7_1/TA0OUT — Port 7 bit 1 / Timer A0 output |
| پن 36 | P7_0/TA0IN — Port 7 bit 0 / Timer A0 input |
| پن 37 | P6_7/TXD1 — Port 6 bit 7 / UART1 transmit |
| پن 38 | P6_6/RXD1 — Port 6 bit 6 / UART1 receive |
| پن 39 | P6_5/CLK1 — Port 6 bit 5 / UART1 clock |
| پن 40 | P6_4/CTS1 — Port 6 bit 4 / UART1 CTS |
| پن 41 | P6_3/TXD0 — Port 6 bit 3 / UART0 transmit |
| پن 42 | P6_2/RXD0 — Port 6 bit 2 / UART0 receive |
| پن 43 | P6_1/CLK0 — Port 6 bit 1 / UART0 clock |
| پن 44 | P6_0/CTS0 — Port 6 bit 0 / UART0 CTS |
| پن 45 | P5_7/SCL2 — Port 5 bit 7 / I2C2 clock |
| پن 46 | P5_6/SDA2 — Port 5 bit 6 / I2C2 data |
| پن 47 | P5_5/SCL1 — Port 5 bit 5 / I2C1 clock |
| پن 48 | P5_4/SDA1 — Port 5 bit 4 / I2C1 data |
| پن 49 | P5_3/SCLK — Port 5 bit 3 / SIO clock |
| پن 50 | P5_2/SOUT — Port 5 bit 2 / SIO data out |
| پن 51 | P5_1/SIN — Port 5 bit 1 / SIO data in |
| پن 52 | P5_0 — Port 5 bit 0 |
| پن 53 | P4_7/TA4IN — Port 4 bit 7 / Timer A4 input |
| پن 54 | P4_6/TA4OUT — Port 4 bit 6 / Timer A4 output |
| پن 55 | P4_5/TB5IN — Port 4 bit 5 / Timer B5 input |
| پن 56 | P4_4/TB5OUT — Port 4 bit 4 / Timer B5 output |
| پن 57 | P4_3/TB4IN — Port 4 bit 3 / Timer B4 input |
| پن 58 | P4_2/TB4OUT — Port 4 bit 2 / Timer B4 output |
| پن 59 | P4_1/TB3IN — Port 4 bit 1 / Timer B3 input |
| پن 60 | P4_0/TB3OUT — Port 4 bit 0 / Timer B3 output |
| پن 61 | P3_7/TB2IN — Port 3 bit 7 / Timer B2 input |
| پن 62 | P3_6/TB2OUT — Port 3 bit 6 / Timer B2 output |
| پن 63 | P3_5/TB1IN — Port 3 bit 5 / Timer B1 input |
| پن 64 | P3_4/TB1OUT — Port 3 bit 4 / Timer B1 output |
| پن 65 | P3_3/TB0IN — Port 3 bit 3 / Timer B0 input |
| پن 66 | P3_2/TB0OUT — Port 3 bit 2 / Timer B0 output |
| پن 67 | P3_1/INT3 — Port 3 bit 1 / External interrupt 3 |
| پن 68 | P3_0/INT2 — Port 3 bit 0 / External interrupt 2 |
| پن 69 | P2_7/INT7 — Port 2 bit 7 / External interrupt 7 |
| پن 70 | P2_6/INT6 — Port 2 bit 6 / External interrupt 6 |
| پن 71 | P2_5/INT5 — Port 2 bit 5 / External interrupt 5 |
| پن 72 | P2_4/INT4 — Port 2 bit 4 / External interrupt 4 |
| پن 73 | P2_3/INT3 — Port 2 bit 3 / External interrupt 3 |
| پن 74 | P2_2/INT2 — Port 2 bit 2 / External interrupt 2 |
| پن 75 | P2_1/INT1 — Port 2 bit 1 / External interrupt 1 |
| پن 76 | P2_0/INT0 — Port 2 bit 0 / External interrupt 0 |
| پن 77 | P1_7/TXD2 — Port 1 bit 7 / UART2 transmit |
| پن 78 | P1_6/RXD2 — Port 1 bit 6 / UART2 receive |
| پن 79 | P1_5 — Port 1 bit 5 |
| پن 80 | P1_4 — Port 1 bit 4 |
| پن 81 | P1_3 — Port 1 bit 3 |
| پن 82 | P1_2 — Port 1 bit 2 |
| پن 83 | P1_1 — Port 1 bit 1 |
| پن 84 | P1_0 — Port 1 bit 0 |
| پن 85 | P0_7 — Port 0 bit 7 |
| پن 86 | P0_6 — Port 0 bit 6 |
| پن 87 | P0_5 — Port 0 bit 5 |
| پن 88 | P0_4 — Port 0 bit 4 |
| پن 89 | P0_3 — Port 0 bit 3 |
| پن 90 | P0_2 — Port 0 bit 2 |
| پن 91 | P0_1 — Port 0 bit 1 |
| پن 92 | P0_0 — Port 0 bit 0 |
| پن 93 | XOUT — Crystal oscillator output |
| پن 94 | XIN — Crystal oscillator input |
| پن 95 | VSS — Ground (oscillator) |
| پن 96 | RESET — Reset input (active low) |
| پن 97 | CNVSS — Mode select / boot mode input |
| پن 98 | VCC — Digital supply voltage |
| پن 99 | VCC — Digital supply voltage |
| پن 100 | VSS — Ground |
عام استعمالات
M30624FGPFP#U3C کے لیے موزوں ہے 7 ایپلیکیشنs: Industrial Motor Control, Factory Automation Sensor Nodes, HVAC Control Boards, Automotive Body ECUs (Non-Safety), Consumer White Goods Control, General-Purpose Embedded Control Replacement, Point-of-Sale Terminal Control.
Industrial Motor Control
The M30624FGPFP#U3C fits industrial motor control designs where its 24 MHz M16C/60 core provides deterministic interrupt latency and its 256 KB flash accommodates state-machine plus PWM control firmware. With 3 V / 5 V dual-voltage operation, the MCU drives 5 V gate-driver logic directly, eliminating level shifters on the inverter bridge interface. The on-chip 10-bit A/D samples current-shunt signals for FOC algorithm feedback, while the timer array generates complementary PWM with programmable dead-time insertion. Industrial-temp rating (-40 °C to +85 °C) supports factory-floor cabinets and outdoor pump stations without additional thermal conditioning.
تجویز کردہ
Factory Automation Sensor Nodes
In distributed factory automation, the M30624FGPFP#U3C serves as a sensor-hub MCU aggregating analog inputs from 4-20 mA loops, digital switches, and serial peripherals. Its UART/SIO/I2C interfaces connect to RS-485 transceivers for Modbus RTU or to local HMI displays without external glue logic. The 256 KB flash holds protocol stacks (Modbus, ASCII command parsers) plus application code. Low-power halt mode enables battery-backed operation on wireless sensor nodes; I-temp rating supports unconditioned cabinet environments. Watchdog timer ensures automatic recovery from industrial EMI-induced lockups, critical for unattended deployments.
تجویز کردہ
HVAC Control Boards
The M30624FGPFP#U3C is widely used in HVAC control boards for variable-speed compressor and blower control, leveraging its 24 MHz core, its 10-bit A/D for thermistor sensing, and its PWM-capable timers for TRIAC or IGBT drive. The wide 2.7-5.5 V supply range tolerates rectified 24 VAC-derived rails without additional regulation. I-temp grade handles rooftop unit enclosures exposed to ambient swings. The M16C architecture's deterministic interrupt response is ideal for closed-loop temperature control, where predictable cycle time directly impacts comfort and energy efficiency. The 256 KB flash stores look-up tables, PID constants, and fault-log buffers.
تجویز کردہ
Automotive Body ECUs (Non-Safety)
Within automotive body electronics (not safety-critical), the M30624FGPFP#U3C controls seat modules, mirror adjusters, lighting clusters, and door-zone nodes. Its LIN/UART interfaces connect to in-vehicle networks, and its PWM outputs drive small DC motors and LED arrays. The 256 KB flash supports CAN/LIN-capable firmware stacks plus diagnostic routines (UDS). For underhood or chassis applications requiring AEC-Q100, designers should migrate to the M16C/62P automotive-graded successor; for body-domain -40 °C to +85 °C operation is adequate. The 100-QFP package is hand-solderable for prototyping low-volume variants.
تجویز کردہ
Consumer White Goods Control
Washing machines, dishwashers, and induction cooktops use the M30624FGPFP#U3C as the main appliance controller, where its 256 KB flash holds user-interface state machines plus motor-control algorithms. The 10-bit A/D reads water-level sensors, motor current, and keypad/encoder inputs. Multiple timer channels drive BLDC or universal motors, while UART/SIO interfaces connect to display boards and inverter modules. I-temp grade handles the thermal load inside appliance cabinets, and the Pb-free 100-QFP package meets current EU eco-design directives. Low-power halt modes meet standby energy-consumption regulations.
تجویز کردہ
General-Purpose Embedded Control Replacement
Designers porting legacy 8-bit designs to a 16-bit platform often pick the M30624FGPFP#U3C for its familiar M16C/60 architecture, deterministic interrupt model, and ample 256 KB flash. It replaces 8051 and PIC16 projects requiring more code space or analog integration while preserving C-code portability via the M16C toolchain. The 100-QFP package supports both new layouts and re-use of legacy QFP-100 footprints. Multiple communication peripherals (UART, SIO, I2C) eliminate external bus-expanders, and the watchdog timer improves field-reliability over older 8-bit implementations. I-temp rating is a fit for outdoor and industrial enclosures.
تجویز کردہ
Point-of-Sale Terminal Control
POS terminals and retail peripherals leverage the M30624FGPFP#U3C for keypad scanning, display driving, and serial-port aggregation to printers and scanners. The 24 MHz core handles debounced matrix keypads, character LCD refresh, and protocol parsing without DMA offload. UART/SIO interfaces connect to multiple serial peripherals (barcode readers, receipt printers, customer displays) in parallel. The 256 KB flash supports menu trees, language tables, and transaction logs. I-temp rating fits unconditioned retail backroom environments, and the Pb-free 100-QFP meets retail-equipment RoHS requirements.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا M30624FGPFP#U3C — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | M3062LFGPFP#U3C | M30624FGPFP#U5C | M30624FGPFP#U9C | M30624FGPGP | M30626SPGP#U3C |
|---|---|---|---|---|---|---|
| Package | 100-QFP (14x20) | 100-QFP (14x20) - same | 100-QFP (14x20) - same | 100-QFP (14x20) - same | 100-LQFP - same footprint | 100-LQFP - same footprint |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Core | M16C/60 (16-bit) | M16C/60 (16-bit) | M16C/60 (16-bit) | M16C/60 (16-bit) | M16C/60 (16-bit) | M16C/60 (16-bit) |
| Max Clock Frequency | 24 MHz | 24 MHz | 24 MHz | 24 MHz | 24 MHz | 24 MHz |
| Operating Voltage | 3 V / 5 V | 3 V / 5 V | 3 V / 5 V | 3 V / 5 V | 3 V / 5 V | 3 V / 5 V |
| Lifecycle Status | NRND | Active (recommended replacement) | NRND/Active (variant) | NRND/Active (variant) | NRND | Active (Renesas M16C/62P family) |
اہم امتیازی خصوصیات
- Recommended active-production replacement variant (بمقابلہM3062LFGPFP#U3C)
- Industrial temperature grade -40 °C to +85 °C (بمقابلہM30624FGPFP#U5C)
- Larger QFP package for hand-soldering and rework (بمقابلہM30624FGPGP (100-LQFP))
ڈیزائن نوٹس
The M30624FGPFP#U3C requires separate analog and digital supplies (AVCC, VCC). Decouple AVCC with a 10 µF bulk capacitor plus a 0.1 µF ceramic placed within 5 mm of the pin. The VREF pin supplies the A/D reference; if not used, tie to AVCC through a 0.1 µF capacitor. Reset (active-low) must see a clean monotonic rise with a 1 kΩ pull-up and 0.1 µF decoupling; inadequate decoupling is the most common cause of lockup on power-up.
Route XIN/XOUT traces as short as possible and shield them with a guard ring tied to VSS, since the M16C/60 internal oscillator is sensitive to digital switching noise coupling. For the 100-QFP (14x20 mm) 0.65 mm pitch package, use 0.3 mm wide traces with 0.2 mm clearance under the QFP body and stitch the thermal-pad-free region with a ground pour stitched to VSS via multiple vias to reduce EMI.
Avoid connecting any pin to a voltage above VCC + 0.3 V or below VSS - 0.3 V - the M16C/62P I/O structure does not tolerate voltage excursions outside the supply rails without protection resistors. Use the CNVSS pin correctly: tie to VCC for normal user-mode boot, to VSS for boot-mode entry. Mis-wiring CNVSS is the #1 cause of 'dead-on-arrival' MCUs. Estimated: flash write endurance 100 cycles min per block per Renesas datasheet - design firmware to wear-level across blocks if writing frequently.
تعمیل کی معلومات
RoHS compliant per distributor listings (U3C suffix = Pb-free). Not AEC-Q100 qualified - for automotive safety applications use AEC-Q100-graded M16C/62P successor. REACH compliance inferred from Renesas compliance statements.
