Analog Devices

MAX3232EEUP+T - 1Mbps RS-232 Transceiver | Analog Devices

MPN: MAX3232EEUP+T ✓ فعال
3.0 V to 5.5 V Vdss Down to 10 nA Id 20-pin TSSOP Package
MOQ: 1 |

MAX3232EEUP+T جائزہ

The Analog Devices MAX3232EEUP+T is a 2/2 full-duplex RS-232 transceiver with two drivers and two receivers, operating from 3.0 V to 5.5 V at data rates up to 1 Mbps in a 20-pin TSSOP package. It provides ±15 kV ESD protection on the serial-port pins and supports low-power operation with supply current as low as 10 nA in the specified shutdown condition.

An RS-232 transceiver is an interface IC that converts logic-level signals from a UART or other asynchronous controller into RS-232 voltage levels, while receivers convert incoming RS-232 signals back into logic-compatible levels. In the electronic-component hierarchy, the MAX3232EEUP+T belongs to the interface IC class and uses a charge-pump voltage converter to generate the bipolar voltages required by true RS-232 links.

Key features include a 3.0 V to 5.5 V supply range, operation up to 1 Mbps, 2/2 transceiver configuration, and ±15 kV ESD protection. The integrated dual charge-pump circuit supports true RS-232 output levels while allowing the device to operate from a single low-voltage supply. Four external 0.1 µF charge-pump capacitors are specified by the MAX3232E documentation.

The MAX3232E family is designed for asynchronous serial communication and complies with the electrical requirements of TIA/EIA-232-F. Pin, package, and functional compatibility with the industry-standard MAX232 is identified by Analog Devices. The MAX3232EEUP+T ordering code denotes the 20-pin TSSOP configuration with tape-and-reel production packaging.

Typical uses include RS-232 ports on industrial-control equipment, data acquisition systems, instrumentation, service interfaces, and embedded serial adapters. Its 1 Mbps capability suits higher-speed legacy serial links, while the 3.0 V to 5.5 V operating range simplifies integration with modern 3.3 V and 5 V digital systems.

PCB implementation requires close placement of the charge-pump capacitors and careful routing of the RS-232 driver outputs and receiver inputs. The external capacitor network should follow the manufacturer reference layout, while exposed interface connectors and cable routing require additional ESD and EMI design consideration to preserve reliable communication.

This page combines the manufacturer family specifications with package, ordering, interface, and replacement information. It also provides application guidance and a comparison framework for engineers evaluating equivalent RS-232 transceivers for an existing TSSOP-20 design.

کے لیے ڈراپ اِن متبادل MAX3232EEUP+T — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں MAX3232EEUP+T (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف ESD Protection, Maximum Data Rate, Supply Voltage Range, Charge Pump, External Charge-Pump Capacitors.

Analog Devices
ESD Protection: ±15 kV
Maximum Data Rate: 1 Mbps
External Charge-Pump Capacitors: 4 capacitors
موازنہ کریں MAX3232EEUP+T →
Analog Devices
ESD Protection: ±15kV
Maximum Data Rate: 1Mbps
Supply Voltage Range: 3.0V to 5.5V
موازنہ کریں MAX3232EEUP+T →

MAX3232EEAE+

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
Analog Devices
📦 TSSOP-20
True RS-232 transceiver · 2 · 2 · 3.0 V to 5.5 V · 1 Mbps · ±15 kV · Down to 10 nA · 2

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

MAX3232EEUE+

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 TSSOP-20
Same MAX3232E 2/2 RS-232 architecture and TSSOP-20 footprint; the U suffix identifies a different production temperature or ordering configuration, with no quantified operating difference stated here

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

MAX3232EEUP+T تفصیلات

Transceiver Configuration 2/2 full-duplex RS-232
Number of Drivers 2
Number of Receivers 2
Supply Voltage Range 3.0 V to 5.5 V
Maximum Data Rate Up to 1 Mbps
ESD Protection ±15 kV on serial-port pins
Low-Power Shutdown Current Down to 10 nA
سپلائی کرنٹ 1 mA
RS-232 Standard TIA/EIA-232-F
Charge Pump Dual integrated charge-pump circuit
External Charge-Pump Capacitors 4 × 0.1 µF
پیکیج 20-pin TSSOP
ماؤنٹنگ ٹائپ Surface mount
Production Status Production
Compatibility Pin, package, and functionally compatible with the industry-standard MAX232

MAX3232EEUP+T 20-pin tssop پن کنفیگریشن گائیڈ

MAX3232EEUP+T (20-pin tssop پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

MAX3232EEUP+T کے لیے 20-pin tssop پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MAX3232EEUP+T.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

MAX3232EEUP+T کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial RS-232 Control Ports, Data Acquisition Instrumentation, Embedded Serial Adapter, RS-232 Service and Configuration Interface, Laboratory Test Equipment, Industrial Sensor and Controller Hub.

🏭

Industrial RS-232 Control Ports

The MAX3232EEUP+T fits industrial equipment that retains a legacy RS-232 service or controller port because its 3.0 V to 5.5 V supply range supports both 3.3 V and 5 V UART electronics, while its 2/2 full-duplex arrangement provides two driver and two receiver channels. The MAX3232E family supports data rates up to 1 Mbps and includes ±15 kV ESD protection on serial-port pins. Place the four specified 0.1 µF charge-pump capacitors close to the device and route the RS-232 traces away from switching nodes and precision analog signals.

🔧

Data Acquisition Instrumentation

The MAX3232EEUP+T is useful for connecting a data-acquisition controller, instrument, or service computer through a true RS-232 link. Its dual charge-pump architecture generates the bipolar signal levels required by RS-232 from a single 3.0 V to 5.5 V rail, and the two receivers allow two incoming channels to be monitored. Operation up to 1 Mbps provides margin for short, controlled connections, while ±15 kV pin protection improves robustness in electrically noisy laboratory equipment. Validate the baud rate, cable length, grounding, and connector shield implementation for each installation.

🖥️

Embedded Serial Adapter

The MAX3232EEUP+T suits compact serial adapters that bridge a modern UART or processor to a legacy DB9 or terminal connector. Its 20-pin TSSOP package supports compact PCB layouts, while the 3.0 V minimum supply voltage allows operation from 3.3 V system rails. The 2/2 channel count is appropriate for designs needing one transmit and one receive path while retaining a second receiver for status or flow-control signals. Follow the reference layout for the charge-pump capacitors and add connector-side protection for field-accessible cables.

🌐

RS-232 Service and Configuration Interface

The MAX3232EEUP+T can provide a dedicated configuration channel for network appliances, test equipment, and service technicians. Two receiver inputs can monitor remote-control or status signals, while two driver outputs support bidirectional command exchange. The device operates directly from 3.0 V to 5.5 V, reducing the need for a separate RS-232 supply rail. Its ±15 kV ESD protection is valuable near a service connector, although the complete system still needs correct signal grounding, controlled cable routing, and appropriately rated protection components.

🔧

Laboratory Test Equipment

The MAX3232EEUP+T is appropriate for laboratory instruments that communicate with PCs or automated test systems over RS-232. Its true RS-232 levels, 1 Mbps maximum signaling rate, and two transmit and receive channels support short-distance control and measurement links. The single-supply operation reduces rail complexity in portable or mixed-voltage test equipment, while integrated ESD protection adds defense at the interface IC. Designers should still control ground loops, use a defined cable shield strategy, and verify operation at the required baud rate and cable length.

🏭

Industrial Sensor and Controller Hub

The MAX3232EEUP+T can connect a controller hub to legacy sensors or actuators that retain RS-232 interfaces. Its two receiver channels permit the controller to collect two status or data signals, and its two driver channels support commands or control signals. The 3.3 V compatibility reduces power-system complexity in compact industrial electronics, and the 20-pin TSSOP footprint supports dense controller boards. Keep the RS-232 traces away from motor and relay wiring, provide a stable reference ground, and apply the manufacturer charge-pump capacitor layout for reliable operation.

What is the operating voltage of MAX3232EEUP+T?
The MAX3232EEUP+T operates from 3.0 V to 5.5 V. According to the Analog Devices MAX3232E product page and data sheet, this range allows the transceiver to interface with both 3.3 V and 5 V UART controllers. The integrated charge pumps generate the bipolar voltages needed for true RS-232 communication from this single low-voltage supply.
What is the maximum data rate of MAX3232EEUP+T?
The MAX3232EEUP+T supports data rates up to 1 Mbps. The Analog Devices MAX3232E product page identifies the family as an up-to-1 Mbps true RS-232 transceiver. Actual link rate also depends on cable length, baud-rate tolerance, receiver performance, signal integrity, and the UART controller, so deployed systems should be validated under their worst-case channel conditions.
Where can I download the MAX3232EEUP+T datasheet PDF?
The official MAX3232E datasheet and product documentation are available from Analog Devices at https://www.analog.com/en/products/max3232e.html. The document covers the MAX3232E family, including electrical characteristics, RS-232 driver and receiver behavior, charge-pump operation, external-capacitor requirements, and the pin descriptions for the 20-pin TSSOP configuration.
Where can I find the MAX3232EEUP+T pinout?
The MAX3232EEUP+T pinout is documented in the pin-description section of the Analog Devices MAX3232E data sheet and the 20-pin TSSOP package drawing on the manufacturer product page. Use that table when assigning driver outputs, receiver inputs, supply pins, ground connections, charge-pump capacitors, and shutdown-control functions to PCB traces.
Is MAX3232EEUP+T suitable for 3.3V RS-232 systems?
Yes, the MAX3232EEUP+T is suitable for 3.3 V RS-232 systems because its documented supply range is 3.0 V to 5.5 V. According to the Analog Devices MAX3232E documentation, the integrated dual charge pumps create the required positive and negative RS-232 voltage levels from one supply rail. The surrounding UART must also support the selected logic voltage and signaling rate.
What is the best drop-in replacement for MAX3232EEUP+T?
The MAX3232EEAE+ is the closest same-brand, same-family drop-in candidate identified for the MAX3232EEUP+T because both use the 20-pin TSSOP configuration and implement the same two-driver, two-receiver RS-232 architecture. Verify temperature limits, production status, and ordering suffix requirements against the original design before substitution. Pin compatibility alone does not guarantee every operating condition is identical.
Can MAX3232EEAE+ replace MAX3232EEUP+T?
The MAX3232EEAE+ can serve as a candidate replacement for the MAX3232EEUP+T because it is from the same MAX3232E family and uses the same TSSOP-20 footprint. However, the production suffix can encode temperature, package, and reel-processing differences. Confirm the ordering information, temperature grade, lifecycle status, and ESD/data-rate requirements before approving the substitution.
MAX3232EEUP+T vs MAX3232EEAE+ - which is better for industrial control?
Choose the MAX3232EEUP+T when the design specifically requires its production ordering configuration and tape-and-reel assembly; consider the MAX3232EEAE+ when its temperature grade and ordering code match the industrial equipment requirements. Both devices provide the same fundamental 2/2 RS-232 architecture in a 20-pin TSSOP package. The deciding factors are the suffix-specific temperature and processing details rather than interface functionality.
What is the difference between MAX3232EEUP+T and MAX3232EEUE+?
The MAX3232EEUP+T and MAX3232EEUE+ are closely related MAX3232E variants in the same TSSOP family, but their ordering suffixes identify different production configurations. The MAX3232EEUP+T includes the +T tape-and-reel designation, while MAX3232EEUE+ carries a different temperature and package suffix. Compare the complete ordering tables before treating either device as a drop-in substitute.
When should I choose MAX3232EEUP+T over another RS-232 transceiver?
Choose the MAX3232EEUP+T when the PCB requires a 20-pin TSSOP footprint, a 3.0 V to 5.5 V single supply, two drivers, two receivers, and data rates up to 1 Mbps. It is particularly useful when the RS-232 interface must remain compatible with the established MAX3232/MAX232 footprint. A different package or transceiver channel count may be preferable when the PCB does not require that legacy interface.
Is MAX3232EEUP+T still in production?
Yes, Analog Devices lists the MAX3232E family as production. The MAX3232EEUP+T is the 20-pin TSSOP orderable configuration associated with that family. Lifecycle status should still be checked for the exact suffix before a long-term production release, especially when quantities, temperature grades, or assembly packaging may change.
What ESD protection does MAX3232EEUP+T provide?
The MAX3232EEUP+T provides ±15 kV ESD protection on the serial-port connection pins, including ground. The Analog Devices MAX3232E documentation states that the device meets TIA/EIA-232-F electrical requirements. Connector-level protection and cable routing remain important because the IC rating does not eliminate external surges, long ESD paths, or the need for a properly designed chassis interface.
How does the MAX3232EEUP+T charge pump work?
The MAX3232EEUP+T uses an integrated dual charge-pump circuit to produce the positive and negative voltage levels needed by true RS-232 drivers from one 3.0 V to 5.5 V supply. The MAX3232E documentation calls for four small 0.1 µF external charge-pump capacitors. Place these capacitors close to the specified pins and follow the manufacturer reference layout.
Where can I buy MAX3232EEUP+T and check its lead time?
Use the Request a Quote form on this page to request MAX3232EEUP+T availability, current lead time, and order quantities. The form routes the request without embedding a static commercial figure that could become outdated. For production planning, include the required quantity, reel format, target date, and any temperature-grade or inspection requirements with the request.
What are the key specifications of MAX3232EEUP+T that engineers should know?
The key specifications are a 3.0 V to 5.5 V supply, 2/2 full-duplex RS-232 configuration, operation up to 1 Mbps, ±15 kV ESD protection on serial-port pins, and a 20-pin TSSOP package. Analog Devices also identifies compatibility with the industry-standard MAX232. External implementation requires four 0.1 µF charge-pump capacitors and careful placement of the interface network.
What can replace MAX3232EEUP+T?
The MAX3232EEAE+ and MAX3232EEUE+ are same-brand MAX3232E alternatives to evaluate for the MAX3232EEUP+T because they use the TSSOP-20 family configuration. Their suffix-specific temperature, package, and processing details must be checked before substitution. A truly drop-in decision should compare pin functions, supply range, data rate, ESD rating, capacitance requirements, and the complete ordering code.
What is the best Analog Devices equivalent for MAX3232EEUP+T?
The best Analog Devices family candidates are the MAX3232EEAE+ and MAX3232EEUE+, which retain the TSSOP-20 MAX3232E interface architecture. The MAX3232EEUP+T should remain the preferred selection when its exact production suffix is required, while the alternatives are considered when their temperature and ordering characteristics better match the assembly. Verify the pin table and lifecycle status before release.

کے لیے انجینئرنگ ریفرنس ڈیٹا MAX3232EEUP+T — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the MAX3232EEUP+T when an existing design requires the 20-pin TSSOP MAX3232E footprint, two RS-232 drivers and two receivers, operation from 3.0 V to 5.5 V, and data rates up to 1 Mbps. It is a strong fit for industrial, instrumentation, and service-interface designs that need true RS-232 levels from a single 3.3 V or 5 V rail. The MAX3232EEAE+ is a same-family candidate when its suffix-specific production and temperature characteristics better fit the assembly. Consider MAX3232EEUE+ similarly, but check its ordering information and thermal grade before release. A different RS-232 transceiver is preferable when the board does not use the MAX3232 pin arrangement or requires a different channel count, package, or data rate. For any proposed drop-in replacement, verify the complete pin table, external capacitor network, shutdown behavior, ESD rating, and cable-interface requirements rather than relying on package dimensions alone.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ MAX3232EEAE+ MAX3232EEUE+
Brand Analog Devices Analog Devices Analog Devices
Package TSSOP-20 TSSOP-20 TSSOP-20
Transceiver Configuration 2/2 full-duplex RS-232 2/2 full-duplex RS-232 2/2 full-duplex RS-232
Supply Voltage Range 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V
Maximum Data Rate Up to 1 Mbps Up to 1 Mbps Up to 1 Mbps
Number of Drivers 2 2 2
Number of Receivers 2 2 2
ESD Protection ±15 kV on serial-port pins ±15 kV on serial-port pins ±15 kV on serial-port pins
Supply Current 1 mA 1 mA 1 mA
External Charge-Pump Capacitors 4 × 0.1 µF 4 × 0.1 µF 4 × 0.1 µF

اہم امتیازی خصوصیات

  • Combines a 3.0 V minimum supply with 1 Mbps operation (بمقابلہMAX3232EEAE+)
  • Production tape-and-reel ordering option (بمقابلہMAX3232EEUE+)
  • Established MAX3232E interface architecture (بمقابلہMAX3232EEAE+)

ڈیزائن نوٹس

Place the four 0.1 µF charge-pump capacitors directly beside their associated MAX3232EEUP+T pins using the shortest possible traces. Maintain the manufacturer reference-layout spacing and keep capacitor returns close to the device ground. Incorrect charge-pump placement can degrade output levels, increase ripple, and make transmission unreliable even when the UART and power rails are otherwise correct.

Route the two RS-232 driver outputs directly toward the connector, and keep the receiver inputs away from switching nodes, inductors, relay contacts, and high-current motor wiring. Treat the RS-232 reference ground and logic ground according to the system grounding architecture rather than creating long high-current return paths through the transceiver. A controlled connector and cable shield improve practical immunity beyond the IC's ±15 kV pin rating.

Do not select a candidate solely because its package has 20 pins. Confirm that driver outputs, receiver inputs, charge-pump capacitors, shutdown control, supply, and ground correspond to the same pin functions. The MAX3232E family is compatible with the industry-standard MAX232 according to Analog Devices, but alternate manufacturers may use different truth tables, shutdown behavior, capacitor values, or channel assignments in otherwise similar TSSOP packages.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The Analog Devices documentation identifies TIA/EIA-232-F electrical compliance and ±15 kV IEC ESD protection for the MAX3232E family. Exact RoHS, REACH, lead-free, halogen-free, and conflict-minerals status was not established for this ordering suffix.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-18 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

MAX3232EEUP+T datasheet MAX3232EEUP+T pinout MAX3232EEUP+T datasheet pdf MAX3232EEUP+T equivalent MAX3232EEUP+T replacement MAX3232EEUP+T price MAX3232EEUP+T stock Analog Devices MAX3232EEUP+T MAX3232EEUP+T vs MAX3232EEAE+ MAX3232EEUP+T TSSOP-20 footprint MAX3232EEUP+T RS-232 interface MAX3232EEUP+T 1Mbps transceiver

متعلقہ اجزاء اور اصطلاحات

Analog Devices MAX3232EEUP+T MAX3232EEAE+ MAX3232EEUE+ MAX3232E MAX232 RS-232 transceiver interface IC UART transceiver 2/2 full-duplex transceiver charge-pump voltage converter TIA/EIA-232-F ±15 kV IEC ESD protection 3.0 V to 5.5 V 1 Mbps 10 nA TSSOP-20 TSSOP package family surface-mount package RS-232 driver RS-232 receiver industrial control data acquisition legacy serial communication
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں