MC14521BD - 24-Stage Frequency Divider | onsemi
MPN: MC14521BD ✓ فعالMC14521BD جائزہ
A frequency divider is a counter or logic IC that reduces one clock frequency to a lower, predictable frequency. The MC14521BD belongs to the CMOS counter-and-divider hierarchy, where a chain of bistable stages forms a ripple-style binary frequency reduction network. The 24-stage count provides a much longer division interval than ordinary binary counters, allowing a relatively high-frequency timing reference to produce a slow event rate without a microcontroller or complex divider array.
The key features of the MC14521BD include 24 internal flip-flops, three selectable input operating modes, division by two per stage, and a maximum count of 16,777,216. Its 16-lead SOIC package supports conventional surface-mount assembly. The D suffix identifies the particular onsemi device grade, while the MC14521B family datasheet describes the common divider architecture and electrical characteristics used to evaluate the MC14521BD.
Internally, the input section can operate as a crystal oscillator, an RC oscillator, or a buffer for an externally supplied oscillator signal. This flexibility allows the circuit designer to establish a self-contained timebase or use a cleaner reference already present elsewhere in the system. Each flip-flop divides the frequency of the preceding stage by two, creating a binary sequence across the divider chain and supporting applications that require long count intervals or periodic pulse generation.
Typical uses include low-frequency clock generation, industrial timer modules, laboratory pulse generators, frequency-counting instruments, event-rate reduction, and embedded timing references. In an oscillator arrangement, the device can replace a bank of discrete divider flip-flops. When driven from an external oscillator, the same package provides a compact way to reduce a reference clock to a rate suitable for counters, displays, or slow sequencing circuits.
Designers should verify the selected crystal or RC network against the operating conditions in the MC14521B datasheet and confirm that the oscillator starts and remains stable over the intended temperature and supply range. Decoupling should be placed close to the supply pins, unused inputs should be held at defined logic levels, and output timing should be checked for the propagation delay accumulated through 24 stages. The maximum operating frequency and output-drive capability must also be considered in the final timing design.
This product page combines the verified divider architecture, package information, application guidance, replacement analysis, and practical design considerations in one engineering-focused reference. It helps designers identify the correct operating mode, understand the binary count limit, and distinguish a genuine same-footprint replacement from a merely similar counter before committing a new PCB revision.
کے لیے ڈراپ اِن متبادل MC14521BD — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں MC14521BD (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Logic Family, Package.
MC14521BM
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MC14521BE
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MC14521BF
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MC14521BD زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Device Type | 24-stage CMOS frequency divider |
| Internal Flip-Flops | 24 flip-flops |
| Maximum Count | 16,777,216 counts (2^24) |
| Frequency Division per Stage | 2:1 |
| Counter Elements | 1 element |
| Counting Edge | Negative edge |
| Oscillator Modes | 3 modes: crystal, RC, or external-oscillator input |
| سپلائی وولٹیج | 5 V |
| پیکیج | 16-pin SOIC |
| Package Width | 0.154 inch, 3.90 mm |
| ماؤنٹنگ ٹائپ | Surface mount |
| Logic Family | CMOS |
MC14521BD 0.154 inch, 3.90 mm پن کنفیگریشن گائیڈ
MC14521BD (0.154 inch, 3.90 mm پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MC14521BD.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
MC14521BD کے لیے موزوں ہے 6 ایپلیکیشنs: Long-Interval Digital Timer, Crystal-Based Time Reference, Industrial Event-Rate Reduction, Pulse Generator and Synthesizer, Frequency-Counter Front End, Low-Frequency Clock for Embedded Control.
Long-Interval Digital Timer
The MC14521BD is suitable for building a long-duration digital timer because its 24 flip-flops create a binary count sequence reaching 16,777,216 states. Each stage divides the preceding clock by two, allowing a comparatively high-frequency reference to produce a much slower periodic signal. The device can use an external oscillator input, crystal oscillator, or RC oscillator, depending on the required timing accuracy and component count. For a practical timer, the output frequency or count interval should be recalculated for the exact oscillator frequency and the 24-stage division ratio.
تجویز کردہ
Crystal-Based Time Reference
The MC14521BD can establish a self-contained crystal-based time reference because its input circuit supports crystal-oscillator operation. The internal oscillator provides a periodic signal that is progressively divided by two across 24 stages, producing a stable low-frequency output without a bank of discrete divider flip-flops. This arrangement is useful in instrumentation, control panels, and embedded timing modules where a compact, dedicated divider reduces component count. The crystal frequency, load network, startup margin, and output frequency must be verified against the application and the MC14521B datasheet.
تجویز کردہ
Industrial Event-Rate Reduction
The MC14521BD is useful when an industrial event stream is too fast for a counter, display, or downstream controller. Feeding a reference signal into the external-oscillator input allows the 24-stage divider to reduce it by a power-of-two ratio, with each stage providing 2:1 division. The maximum binary count is 16,777,216, offering a long interval between transitions. Choose the input frequency so that the resulting event rate remains useful and confirm timing margins across the required industrial temperature range before releasing the equipment for production.
تجویز کردہ
Pulse Generator and Synthesizer
The MC14521BD can serve as the slow timing element in a pulse generator by dividing an oscillator or external reference into a predictable low-frequency signal. Its 24-stage cascade offers much greater division than a conventional ripple counter, while the selectable crystal, RC, or external-input modes support both precision and economical implementations. In laboratory or service equipment, the divided output can trigger display updates, sampling sequences, or relay timing. Account for accumulated stage delay and oscillator tolerance when establishing the required output timing accuracy.
تجویز کردہ
Frequency-Counter Front End
The MC14521BD can reduce a high-frequency input to a rate that a slower counter stage can measure, display, or record. The 2:1 division at each of 24 stages creates a very large division factor of 2^24, while the external-oscillator mode allows a clean system clock to drive the divider. This arrangement is useful in bench instruments and industrial monitoring units that need long gate intervals or slow calibration clocks. The signal amplitude, edge timing, maximum input frequency, and source-to-divided-output delay should be evaluated together.
تجویز کردہ
Low-Frequency Clock for Embedded Control
The MC14521BD can create a low-frequency clock from an RC or crystal oscillator for embedded timing functions that do not require software-generated delays. Its 24-stage divider produces a binary frequency reduction extending to 16,777,216 counts, and the external-oscillator input can be driven from an existing precision reference. The resulting clock can pace display refresh, sampling intervals, watchdog-style events, or slow state machines. Keep the divider supply close to the associated logic supply and validate startup, supply sensitivity, and timing jitter before relying on it for a precision interval.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا MC14521BD — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | MC14521BM | MC14521BE | MC14521BF |
|---|---|---|---|---|
| Brand | onsemi | onsemi | onsemi | onsemi |
| Package | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
| Counter Stages | 24 stages | 24 stages | 24 stages | 24 stages |
| Maximum Count | 16,777,216 counts | 16,777,216 counts | 16,777,216 counts | 16,777,216 counts |
| Frequency Division per Stage | 2:1 | 2:1 | 2:1 | 2:1 |
| Oscillator Modes | 3 modes: crystal, RC, or external oscillator | 3 modes: crystal, RC, or external oscillator | 3 modes: crystal, RC, or external oscillator | 3 modes: crystal, RC, or external oscillator |
| Counting Edge | Negative edge | Negative edge | Negative edge | Negative edge |
اہم امتیازی خصوصیات
- Exceptionally long fixed binary count interval (بمقابلہMC74F538N)
- Three built-in timebase configurations (بمقابلہMC14521BM)
- Compact fixed-divider implementation (بمقابلہMC14521BE)
ڈیزائن نوٹس
Do not treat the MC14521BD as a programmable counter. Its fixed architecture divides each stage by two, producing a maximum count of 16,777,216. If the system needs a selectable modulus, a synchronous counter, or a readable count bus, use a programmable counter instead. For a direct functional substitution, verify the oscillator connection, pin assignments, output count direction, and the electrical limits of each suffix grade.
Place the supply bypass capacitor close to the device's supply and ground pins, and keep the oscillator and divider-output routing away from noisy switching nodes. When using the RC oscillator mode, keep the timing components and their return path compact to reduce sensitivity to board leakage and interference. The 16-pin SOIC footprint provides limited routing area, so verify pin assignments against the MC14521B datasheet before finalizing the layout.
Check the timing budget across all 24 stages rather than evaluating only the first divide-by-two transition. Input edge quality, oscillator stability, propagation delay, and the intended final output frequency determine whether the divider can preserve useful timing margin. In crystal mode, follow the load-capacitance and layout guidance in the manufacturer datasheet; in external mode, use a clean signal whose edge rate and amplitude meet the input requirements.
The device is identified as a 5 V CMOS part. Keep the supply within the limits stated by the onsemi MC14521B datasheet and provide local bypass capacitance so oscillator and divider outputs are not disturbed by supply ripple. If the surrounding logic uses a different voltage, use an appropriate translator or level-shifting interface rather than assuming compatibility from the 5 V marking.
تعمیل کی معلومات
Compliance attributes require confirmation from the current onsemi product documentation or manufacturer declaration.