MC9S08DV48ACLH - 40MHz 48KB Flash 8-Bit MCU | NXP
MPN: MC9S08DV48ACLH ✗ اختتامِ زندگیMC9S08DV48ACLH جائزہ
A microcontroller, or MCU, is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and interface pins into one package. Within the embedded-control hierarchy, this device belongs to the 8-bit MCU, HCS08 core, embedded-control IC, and semiconductor categories. Its combination of flash memory, serial networking, analog conversion, timers, and on-chip emulation makes it suitable for compact automotive and industrial controllers rather than general-purpose computing systems.
Key features reported for the MC9S08DV48ACLH include a 40 MHz processor clock, a 20 MHz bus, a 48 KB Flash program memory, 2 KB RAM, embedded CAN and LIN support, and a 16-channel 12-bit ADC. The S08 instruction set supports up to 32 interrupt and reset sources. These interfaces allow one controller to manage communication and real-time peripherals while reducing the number of discrete components on a board.
The part belongs to the HCS08/S08DV family and uses an 8-bit data bus. The NXP overview lists the MC9S08DV48ACLH as NRND, meaning it is not recommended for new designs. Existing designs can still require procurement and lifecycle planning, while new projects should compare currently active MCU options before committing to a PCB or software platform.
Typical embedded uses include automotive body and climate-control modules, industrial interface controllers, CAN or LIN gateway equipment, and compact instrumentation products. The 64-LQFP package exposes more peripheral and communication pins than smaller packages, making it practical for systems that need broader external connectivity while retaining through-hole-like board assembly.
The principal design consideration is lifecycle risk. Because the device is marked NRND, engineers should verify stock, long-term supply, and firmware support through authorized distributors. PCB replacement should also compare pin mapping, clock configuration, memory map, peripheral multiplexing, and software driver assumptions rather than relying only on the device name.
This page combines verified NXP and distributor listings, available pricing signals, lifecycle information, and practical selection guidance. It also distinguishes confirmed drop-in alternatives from unsupported replacements, helping engineers make sourcing decisions without assuming that a similar MCU is electrically and mechanically interchangeable.
کے لیے ڈراپ اِن متبادل MC9S08DV48ACLH — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں MC9S08DV48ACLH (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Flash Memory, Product Type, Automotive Qualification, Connectivity.
MC9S08DV48CLH
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MC9S08DZ48ACLH
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
S9S08DV128F2CLFR
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MC9S08DV60MLH
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →S9S08DV96F2CLL
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MC9S08DV48ACLH زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | 8-bit microcontroller (MCU) |
| Processor Core | HCS08 S08 core |
| Maximum CPU Frequency | 40 MHz |
| Bus Frequency | 20 MHz |
| ڈیٹا بس چوڑائی | 8 bit |
| Flash Memory | 48 KB |
| RAM | 2 KB |
| ADC Resolution | 12 bit |
| ADC Channels | 16 channels |
| Connectivity | CAN, LIN, USB 2.0 |
| Timer Capability | Enhanced 16-bit timers |
| Interrupt/Reset Sources | Up to 32 sources |
| پیکیج | 64-LQFP (10 x 10 mm) |
| ماؤنٹنگ ٹائپ | Surface mount |
| سپلائی وولٹیج | 3.3 V / 5 V |
| لائف سائیکل کی حالت | NRND |
MC9S08DV48ACLH 64-lqfp (10 x 10 mm) پن کنفیگریشن گائیڈ
MC9S08DV48ACLH (64-lqfp (10 x 10 mm) پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MC9S08DV48ACLH.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
MC9S08DV48ACLH کے لیے موزوں ہے 6 ایپلیکیشنs: Automotive Body Control Module, CAN and LIN Network Gateway, Industrial Sensor Interface, USB-Enabled Embedded Instrument, Motor and Timing Control, HMI and Instrumentation Controller.
Automotive Body Control Module
The MC9S08DV48ACLH fits a compact body-control or vehicle interface module because its S08DV platform combines a 40 MHz 8-bit CPU with 48 KB Flash, 2 KB RAM, CAN, and LIN connectivity. The 16-channel 12-bit ADC can support analog sensing, while the 64-LQFP package provides access to communication and peripheral pins. A vehicle design must still verify the exact transceiver, pin multiplexing, automotive qualification, and operating-temperature requirements before release.
تجویز کردہ
CAN and LIN Network Gateway
The MC9S08DV48ACLH is a logical candidate for a small network gateway because the verified listings identify both CAN and LIN master support alongside USB 2.0. Its 48 KB Flash can hold protocol and application firmware, while 2 KB RAM supports buffering and state management for an 8-bit embedded controller. The design should budget external transceivers, validate bus timing, and confirm that the chosen suffix exposes every required communication pin on the 64-LQFP footprint.
تجویز کردہ
Industrial Sensor Interface
For an industrial sensor interface, the MC9S08DV48ACLH provides a useful combination of 16-channel, 12-bit ADC capability and a 40 MHz control core. The ADC can digitize multiple analog inputs while the MCU handles thresholding, filtering, diagnostics, and communication. The 2 KB RAM limit means the software should avoid buffering large sample sets in internal memory; use external memory or streaming methods when needed. The industrial temperature and compliance requirements are not present in the supplied verified data and must be checked separately.
تجویز کردہ
USB-Enabled Embedded Instrument
The MC9S08DV48ACLH can support a compact embedded instrument that needs local control and USB connectivity rather than a high-performance processor. Its 48 KB Flash supports embedded firmware, and the 8-bit S08 core is suitable for supervisory logic, calibration, status reporting, and peripheral control. USB implementation still requires exact pin assignment, clock configuration, transceiver or internal PHY details, and firmware support from the authoritative manufacturer documentation.
تجویز کردہ
Motor and Timing Control
The MC9S08DV48ACLH is suitable for a small motor or timing controller where deterministic control, analog feedback, and serial diagnostics are needed. The enhanced 16-bit timers are relevant for period measurement, pulse generation, and timing tasks, while the ADC can monitor feedback signals. Actual motor-drive suitability depends on the exact S08DV timer and pin configuration, which are not fully included in the supplied search data. Validate timing, interrupt latency, and external driver requirements before design release.
تجویز کردہ
HMI and Instrumentation Controller
The MC9S08DV48ACLH can act as a low-cost controller for a compact human-machine interface or measurement front end. The MCU handles button and status logic, sequences the 16-channel 12-bit ADC, stores configuration in Flash, and reports data through CAN, LIN, or USB. Its 64-LQFP package provides more external pin access than a small-outline package, while the 8-bit architecture is appropriate for supervisory rather than graphics-intensive workloads.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا MC9S08DV48ACLH — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | MC9S08DV48CLH | MC9S08DZ48ACLH | S9S08DV128F2CLFR | MC9S08DV60MLH | S9S08DV96F2CLL |
|---|---|---|---|---|---|---|
| Package | 64-LQFP (10 x 10 mm) | 64-LQFP; exact package details require confirmation | 64-LQFP candidate; exact package details require confirmation | 64-LQFP candidate; exact package details require confirmation | 64-LQFP candidate; exact package details require confirmation | 64-LQFP candidate; exact package details require confirmation |
| Brand | NXP Semiconductors | Freescale Semiconductor | Freescale Semiconductor | Freescale Semiconductor | Freescale Semiconductor | Freescale Semiconductor |
اہم امتیازی خصوصیات
- Established S08DV resource combination (بمقابلہMC9S08DV48CLH)
- Communication and analog integration (بمقابلہMC9S08DZ48ACLH)
- S08DV family software continuity (بمقابلہS9S08DV128F2CLFR)
- Lifecycle visibility (بمقابلہMC9S08DV60MLH)
ڈیزائن نوٹس
Power planning should begin with the exact supply pins and operating limits in the NXP datasheet; the verified data identifies 3.3 V / 5 V support but does not provide complete current limits, regulator requirements, or pin-level decoupling values. Place required bulk and bypass capacitors at the device power pins according to the manufacturer layout guidance, and verify sequencing for USB, CAN, and LIN transceiver supplies.
Because the device is specified in a 64-LQFP package and supports multiple communications, preserve pin multiplexing and routing flexibility during schematic capture. Confirm every pin name and alternate function in the authoritative datasheet before routing. Keep sensitive ADC inputs away from switching nodes and communication edges, and provide clean grounding for the analog and digital sections.
Do not substitute a similarly named S08 part based only on the MPN prefix. The target is NRND, and the verified comparison pages do not prove that each candidate has identical memory, peripherals, pinout, qualification, or software behavior. For a drop-in decision, compare land pattern, pin names, alternate functions, electrical limits, clocking, memory map, interrupt vectors, and driver support.
Estimated thermal analysis requires the actual supply voltage, core current, ambient temperature, and package thermal resistance; none of the complete operating-current or thermal-resistance values are supplied here. Do not assume the 40 MHz rating applies continuously to every peripheral. Measure or calculate worst-case dissipation from the final duty cycle and use the manufacturer package data to size copper and airflow.
The reported $5.2926 starting price and Heisener stock figure are point-in-time signals as of 2026-10-21, not a guaranteed allocation or lifecycle commitment. For production purchasing, obtain authorized-channel confirmation, batch traceability, date-code information, and a written supply-risk assessment because the NXP page marks the part NRND.
تعمیل کی معلومات
The supplied verified data identifies automotive and industrial market positioning but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for this exact MPN. Obtain current declarations from NXP or an authorized distributor.
