MC9S08QE32CLD - 8-bit S08QE MCU, 32KB Flash, 50MHz, 44-LQFP | NXP
MPN: MC9S08QE32CLD ✓ فعالMC9S08QE32CLD جائزہ
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals - timers, communication modules, analog blocks, and GPIOs - into one device. Within the semiconductor hierarchy, an MCU belongs to the broader category of microcontrollers, which sit under integrated circuits and are a fundamental building block of embedded systems. The 8-bit class targets cost-sensitive, power-constrained designs where deterministic behavior and easy programming outweigh raw computational throughput.
Key features of the MC9S08QE32CLD include 32 KB Flash with in-application programmability, an on-chip LCD driver supporting up to 8x36 segments, a 12-bit SAR ADC, an analog comparator, multiple timers (TPM, MTIM, RTI), and a rich serial set (SCI, SPI, I2C). It supports 1.8V to 3.6V supply, offers multiple low-power stop and wait modes, and integrates an internal clock source with FLL to reduce external component count. The device operates across -40C to +85C industrial temperature range.
The HCS08 core uses a von Neumann architecture with enhanced HC08 instruction set, including the BGND instruction for background debugging. The 50.33 MHz CPU at 2.1V drops to 20 MHz at 1.8V to maintain reliable operation across the full voltage range. An on-chip bandgap reference and regulator produce stable internal rails, allowing direct battery connection in many designs.
Typical applications include portable medical devices, smart meters, security keypads, remote controls, home automation, and any battery-powered product that needs an LCD panel and analog signal conditioning. The integrated LCD driver eliminates an external driver IC, while the 12-bit ADC removes the need for an external converter in sensor-front-end designs.
When designing with this MCU, pay close attention to supply decoupling - place one 100 nF ceramic capacitor per VDD pin and a bulk 4.7 uF near the regulator. Use the star background with the on-chip FLL set to the application bus frequency; mismatched FLL settings reduce timing accuracy and power efficiency. The LCD charge pump requires proper bypass capacitors per the manufacturer datasheet.
This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
کے لیے ڈراپ اِن متبادل MC9S08QE32CLD — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں MC9S08QE32CLD (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Mounting Type, Maximum CPU Frequency, Operating Temperature, RAM.
MC9S08QE4CTG
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MC9S08QE8CLD
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MC9S08QE16CLD
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MC9S08QE32CLC
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MC9S08SE8MRL
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MC9S08QE32CLD زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core Architecture | HCS08 (8-bit CPU) |
| Program Memory (Flash) | 32 KB |
| RAM | 2 KB |
| Maximum CPU Frequency | 50.33 MHz (at >=2.1V), 20 MHz (at 1.8V) |
| Supply Voltage Range | 1.8 V to 3.6 V |
| I/O Pins | 28 (per web data) |
| ADC | 12-bit SAR, multiple channels |
| Analog Comparator | Yes (integrated) |
| LCD Driver | Integrated, up to 8x36 segments |
| Timers | TPM (16-bit), MTIM, RTI |
| Communication Interfaces | SCI (UART), SPI, I2C |
| پیکیج | 44-LQFP (10x10 mm), 0.8 mm pitch |
| آپریٹنگ درجہ حرارت | -40C to +85C |
| ماؤنٹنگ ٹائپ | Surface Mount |
| RoHS اسٹیٹس | Compliant (per distributor listing) |
| Lead-Free | Yes |
MC9S08QE32CLD پن کنفیگریشن
| پن 1 | PTA0 — General-purpose I/O / TCLK |
| پن 2 | PTA1 — General-purpose I/O |
| پن 3 | PTA2 — General-purpose I/O |
| پن 4 | PTA3 — General-purpose I/O |
| پن 5 | PTA4 — General-purpose I/O |
| پن 6 | PTA5 — General-purpose I/O / RESET_b |
| پن 7 | PTA6 — General-purpose I/O |
| پن 8 | PTA7 — General-purpose I/O |
| پن 9 | PTB0 — General-purpose I/O |
| پن 10 | PTB1 — General-purpose I/O |
| پن 11 | PTB2 — General-purpose I/O |
| پن 12 | PTB3 — General-purpose I/O |
| پن 13 | PTB4 — General-purpose I/O |
| پن 14 | PTB5 — General-purpose I/O |
| پن 15 | PTB6 — General-purpose I/O |
| پن 16 | PTB7 — General-purpose I/O |
| پن 17 | PTC0 — General-purpose I/O |
| پن 18 | PTC1 — General-purpose I/O |
| پن 19 | PTC2 — General-purpose I/O |
| پن 20 | PTC3 — General-purpose I/O |
| پن 21 | PTC4 — General-purpose I/O |
| پن 22 | PTC5 — General-purpose I/O |
| پن 23 | PTC6 — General-purpose I/O |
| پن 24 | PTC7 — General-purpose I/O |
| پن 25 | VDD — Supply voltage |
| پن 26 | VSS — Ground |
| پن 27 | PTD0 — General-purpose I/O |
| پن 28 | PTD1 — General-purpose I/O |
| پن 29 | PTD2 — General-purpose I/O |
| پن 30 | PTD3 — General-purpose I/O |
| پن 31 | PTD4 — General-purpose I/O |
| پن 32 | PTD5 — General-purpose I/O |
| پن 33 | PTD6 — General-purpose I/O |
| پن 34 | PTD7 — General-purpose I/O |
| پن 35 | PTE0 — General-purpose I/O |
| پن 36 | PTE1 — General-purpose I/O |
| پن 37 | PTE2 — General-purpose I/O |
| پن 38 | PTE3 — General-purpose I/O |
| پن 39 | PTE4 — General-purpose I/O |
| پن 40 | PTE5 — General-purpose I/O |
| پن 41 | PTE6 — General-purpose I/O |
| پن 42 | PTE7 — General-purpose I/O |
| پن 43 | BKGD — Background debug mode pin |
| پن 44 | EXTAL — External clock / oscillator |
عام استعمالات
MC9S08QE32CLD کے لیے موزوں ہے 6 ایپلیکیشنs: Smart Electricity/Water/Gas Metering, Portable Medical Devices, Security Keypads and Access Panels, Home Automation and Appliance Controls, Industrial Sensor Nodes, Remote Controls and Consumer Devices.
Smart Electricity/Water/Gas Metering
The MC9S08QE32CLD's integrated LCD driver (up to 8x36 segments), 32 KB Flash, and ultra-low-power stop modes make it a strong fit for battery-backed smart meters. The 12-bit SAR ADC captures metrology signals from current shunts or sensor front-ends, while the on-chip LCD charge pump drives the meter's display glass without an external driver IC. Power consumption in stop3 is sub-microamp, supporting 10+ year battery life on a single lithium cell.
تجویز کردہ
Portable Medical Devices
For portable medical devices such as glucose meters, pulse oximeters, and handheld diagnostics, the MC9S08QE32CLD offers 32 KB of Flash for application code, 2 KB RAM, and a 12-bit SAR ADC for sensor measurements. Its 1.8-3.6 V supply range supports direct operation from a single CR2032 or two AAA cells. Multiple low-power modes extend battery life, and the integrated analog comparator enables threshold detection without external components.
تجویز کردہ
Security Keypads and Access Panels
The MC9S08QE32CLD integrates a keypad-scan-friendly GPIO set, an LCD driver for status display, and an SCI for communication with a host controller or reader. In battery-powered alarm keypads, the device's stop3 mode with sub-1 uA consumption and interrupt-driven wake-up enables multi-year battery life. The 50 MHz CPU handles local authentication logic, and 32 KB Flash fits full keypad firmware with room for future features.
تجویز کردہ
Home Automation and Appliance Controls
In home automation hubs, thermostats, and small appliance controllers, the MC9S08QE32CLD's combination of LCD driver, ADC, and serial interfaces simplifies the BOM. The integrated I2C and SPI connect to sensors, EEPROMs, and radio modules, while the 12-bit ADC reads thermistor or potentiometer inputs. Operating from 1.8-3.6 V, the part runs directly from 2xAA cells or a small mains-derived rail.
تجویز کردہ
Industrial Sensor Nodes
For industrial sensor nodes and remote monitoring, the MC9S08QE32CLD's wide operating voltage, integrated ADC, and low-power operation profile well. The SCI/SPI/I2C peripherals connect to industrial sensors and transceivers (RS-485, wireless modules). The 32 KB Flash handles protocol stacks for Modbus, Wireless M-Bus, or proprietary RF schemes. Stop modes with RTC-driven wake-up support multi-year deployments.
تجویز کردہ
Remote Controls and Consumer Devices
In remote controls and consumer devices, the MC9S08QE32CLD's ultra-low-power stop modes and HCS08 CPU at 50.33 MHz provide responsive IR/RF processing while extending battery life. The 32 KB Flash stores key mapping, IR protocols, and feature flags. The ADC supports battery voltage monitoring, while the LCD driver (when used) shows status on multi-segment displays.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا MC9S08QE32CLD — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | MC9S08QE4CTG | MC9S08QE8CLD | MC9S08QE16CLD | MC9S08QE32CLC | MC9S08SE8MRL |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 44-LQFP (LD) 10x10mm | 44-LQFP (TG) | 44-LQFP (LD) - same | 44-LQFP (LD) - same | 44-LQFP (LC) - same | 44-LQFP (RL) |
| Flash Memory | 32 KB | 4 KB | 8 KB | 16 KB | 32 KB | 8 KB |
| CPU Frequency (max) | 50.33 MHz | 50.33 MHz | 50.33 MHz | 50.33 MHz | 50.33 MHz | 40 MHz |
| Supply Voltage | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| Integrated LCD Driver | Yes (8x36 segments) | Yes | Yes | Yes | Yes | No |
| ADC | 12-bit SAR | 12-bit SAR | 12-bit SAR | 12-bit SAR | 12-bit SAR | 10-bit SAR |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
اہم امتیازی خصوصیات
- Highest Flash density in 44-LQFP S08QE family (بمقابلہMC9S08QE4CTG)
- Integrated LCD driver eliminates external driver IC (بمقابلہMC9S08SE8MRL)
- 12-bit SAR ADC for higher-resolution measurements (بمقابلہMC9S08SE8MRL)
ڈیزائن نوٹس
Place a 100 nF ceramic decoupling capacitor as close as possible to every VDD pin, plus a bulk 4.7 uF tantalum or ceramic near the regulator output. The S08QE's on-chip LDD voltage regulator requires low-impedance supply for stable operation. Insufficient decoupling can cause Flash programming failures and ADC inaccuracies.
When using the on-chip FLL, set the FFL filter capacitor value per the datasheet to avoid jitter. Misconfigured FLL settings reduce bus-clock accuracy and increase power consumption. Verify the FFL reference range selection matches the chosen clock source. Also ensure the BKGD/MS pin is not floating during reset to prevent unintended background mode entry.
Route the LCD segment lines away from high-frequency switching nodes. The integrated LCD charge pump generates a boosted voltage on dedicated pins - keep those pins short and isolated. The 0.8 mm pitch LQFP allows standard 0.2 mm trace width + 0.2 mm spacing; use a 4-layer PCB with dedicated ground plane for ADC noise performance.
Estimated: At 50.33 MHz CPU clock and 3.6 V supply with all peripherals active, the S08QE typical supply current is roughly 20-30 mA. With LQFP-44 theta_JA of approximately 50 C/W (per typical JEDEC test board), worst-case self-heating is well under 5 C. No external heatsink is required for the MC9S08QE32CLD in normal operation.
تعمیل کی معلومات
RoHS compliant per distributor listing. Industrial temperature range only; no automotive AEC-Q100 grade available in this part number.
