MC9S08RD16CFG - 8-Bit 16KB Flash 44-LQFP MCU | onsemi
MPN: MC9S08RD16CFG ✓ فعالMC9S08RD16CFG جائزہ
An S08 microcontroller is an 8-bit embedded processing device within the microcontroller hierarchy of embedded semiconductors. It combines a processor core, flash program memory, static RAM, timers, communication peripherals, interrupt control, and general-purpose I/O on one integrated circuit. The S08 family targets cost-conscious embedded products in which deterministic control, compact packaging, and flexible peripheral integration are more important than high-bandwidth computation.
The MC9S08RD16CFG provides 16 KB of flash for firmware and 1,024 bytes of RAM for working data. Its 8 MHz clock rate gives adequate execution capacity for supervisory loops, parameter monitoring, user-interface control, and communication tasks. A 39-line I/O complement allows the device to connect digital inputs, outputs, serial interfaces, and external control signals while maintaining a low-voltage 1.8 V to 3.6 V operating range.
The 44-LQFP package exposes more connections than smaller leaded or compact surface-mount alternatives and supports practical routing to connectors, sensors, display interfaces, and discrete control circuitry. Because the MC9S08RD16CFG is programmed and qualified as a dedicated 8-bit architecture, engineers should evaluate application code, peripheral mapping, interrupt behavior, and development-tool support rather than treating a general-purpose MCU as an automatic substitute.
Typical applications include industrial sensing modules, building-control endpoints, appliance controllers, instrumentation interfaces, programmable logic controllers, and compact embedded products with multiple digital I/O channels. The device can supervise sensors and actuators, manage debouncing and timing, implement communication protocols, and coordinate system behavior through firmware.
For PCB implementation, follow the manufacturer pin-assignment and land-pattern guidance exactly, especially for power, ground, clock, programming, and reset signals. Place decoupling capacitors close to the supply pins, provide a clean clock path, and reserve programming access. Confirm every peripheral function and alternate pin mapping in the manufacturer data sheet before releasing a layout.
This product record combines the device architecture, verified package and memory characteristics, sourcing guidance, same-family drop-in options, and engineering-oriented selection considerations. It is designed to help designers determine whether the MC9S08RD16CFG fits the required memory capacity, voltage range, package, and embedded-control workload before beginning layout or firmware development.
کے لیے ڈراپ اِن متبادل MC9S08RD16CFG — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
MC9S08RD16CFV
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MC9S08RD8CFG
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MC9S08RD8CFV
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MC9S08RD32CFG
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MC9S08RD32CFV
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MC9S08RD16CFG زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Microcontroller Type | 8-bit S08 microcontroller |
| زیادہ سے زیادہ کلاک فریکوئنسی | 8 MHz |
| Program Memory | 16 KB flash (16K × 8) |
| RAM | 1,024 bytes |
| Operating Voltage Range | 1.8 V to 3.6 V |
| Number of I/O Lines | 39 lines |
| پیکیج | 44-LQFP (10 mm × 10 mm) |
| ماؤنٹنگ ٹائپ | Surface mount |
| Core Architecture | 8-bit |
| Program Memory Type | Flash |
| Number of Programmable I/O Lines | 39 |
| RoHS اسٹیٹس | Compliant |
| پن کی تعداد | 44 pins |
MC9S08RD16CFG 44-lqfp (10 mm × 10 mm) پن کنفیگریشن گائیڈ
MC9S08RD16CFG (44-lqfp (10 mm × 10 mm) پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MC9S08RD16CFG.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
MC9S08RD16CFG کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Sensor and Control Hub, Building Control and Automation, Appliance Controller, Programmable Logic Controller, Instrumentation Interface, Compact Communication Gateway.
Industrial Sensor and Control Hub
The MC9S08RD16CFG fits an industrial sensor hub that must collect digital inputs, operate sensors, and control actuators within a compact controller. Its 39 I/O lines provide substantial connectivity, while the 8 MHz S08 core can supervise sampling sequences, debounce contacts, apply control rules, and manage status indicators. The 16 KB flash is appropriate for a focused firmware image, and the 1,024-byte RAM provides a compact working area. In a 1.8 V to 3.6 V design, place local decoupling near the supply pins, route sensitive signals away from switching nodes, and confirm that every external device remains compatible with the selected supply level.
تجویز کردہ
Building Control and Automation
The MC9S08RD16CFG is suitable for building-control endpoints that manage relays, inputs, and local communication signals on a low-voltage board. Its 39 available I/O lines support digital room controls, occupancy inputs, alarm outputs, and status functions, while the 8 MHz clock is sufficient for deterministic supervisory logic. The 16 KB flash can hold a focused control application, and the 1,024-byte RAM supports short message and state buffers. The LQFP package provides adequate routing flexibility for connector-driven boards. Use the manufacturer pin and layout guidance to preserve access to programming and clock signals, and isolate switching loads to prevent supply transients from disturbing the controller.
تجویز کردہ
Appliance Controller
The MC9S08RD16CFG can serve as the primary controller in an appliance where a low-cost MCU must coordinate switches, sensors, motors, and user inputs. Its 16 KB flash accommodates a control-oriented firmware set, while 1,024 bytes of RAM and an 8 MHz clock support responsive state-machine operation. The 39 I/O lines are useful for encoded controls, discrete actuators, and protection signals. Place the MCU and its decoupling away from motor drivers and relay contacts, use separate filtering paths for noisy inputs, and provide a defined startup sequence for loads. Confirm the final pin multiplexing and peripheral assignments against the manufacturer data sheet before fabrication.
تجویز کردہ
Programmable Logic Controller
The MC9S08RD16CFG is appropriate for compact PLC and logic-controller modules that execute repeatable scanning, timing, interlocking, and event-handling functions. Its 39 I/O lines provide a practical mix of digital inputs and outputs, while the 8 MHz processor supports deterministic supervisory loops. The 16 KB flash is most suitable for lean control code rather than elaborate visualization or communications software. In a PLC design, maintain consistent grounding, use Schmitt-trigger inputs where appropriate, and isolate long external wiring from sensitive timing signals. The 1.8 V to 3.6 V range also supports mixed-voltage systems when the power tree is designed to keep every attached device within its permitted range.
تجویز کردہ
Instrumentation Interface
The MC9S08RD16CFG can act as the low-voltage interface controller in a measurement instrument that gathers switch positions, digital sensor states, and external commands. Its 39 I/O lines allow multiple front-panel and back-panel connections, while 16 KB of flash stores configuration logic, calibration tables, and a communication protocol. The 1,024-byte RAM is suitable for short measurement buffers and status structures, and the 8 MHz clock supports regular sampling and control tasks. For analog precision, use dedicated front-end components and keep their grounding separate from digital return paths. Apply filtering and protection to externally accessible inputs, and use the manufacturer land pattern to achieve consistent assembly and rework performance.
تجویز کردہ
Compact Communication Gateway
The MC9S08RD16CFG works in a small communication endpoint when the design needs local I/O management alongside a lightweight serial protocol. Its 8 MHz S08 core can handle framing, status reporting, configuration updates, and supervision, while the 39 I/O lines support downstream sensors and discrete controls. The 16 KB flash is appropriate for a compact protocol stack and configuration firmware, although it may be restrictive for large buffering or graphical interfaces. Use the 1,024-byte RAM conservatively, define buffer boundaries in firmware, and avoid blocking operations that could delay real-time input handling. Keep communication transceivers and protection devices near the connector while routing the MCU section away from high-current switching paths.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا MC9S08RD16CFG — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | MC9S08RD16CFV | MC9S08RD8CFG | MC9S08RD8CFV | MC9S08RD32CFG | MC9S08RD32CFV |
|---|---|---|---|---|---|---|
| Brand | onsemi | onsemi | onsemi | onsemi | onsemi | onsemi |
| Package | 44-LQFP (10x10) | 44-LQFP (10x10) | 44-LQFP (10x10) | 44-LQFP (10x10) | 44-LQFP (10x10) | 44-LQFP (10x10) |
| Core Architecture | 8-bit S08 | 8-bit S08 | 8-bit S08 | 8-bit S08 | 8-bit S08 | 8-bit S08 |
| Maximum Clock Frequency | 8 MHz | 8 MHz | 8 MHz | 8 MHz | 8 MHz | 8 MHz |
| Program Memory | 16 KB flash | 16 KB flash | 8 KB flash | 8 KB flash | 32 KB flash | 32 KB flash |
اہم امتیازی خصوصیات
- Balanced embedded-control resource allocation (بمقابلہMC9S08RD8CFG)
- Lower flash capacity than the larger same-family option (بمقابلہMC9S08RD32CFG)
- High I/O availability for compact control boards (بمقابلہMC9S08RD16CFV)
ڈیزائن نوٹس
Place the MCU, bypass capacitors, clock components, and programming-header contacts in a compact central region. Route supply and ground connections directly from the regulator and ground plane, with a short return path for every decoupling capacitor. The 44-LQFP footprint is not interchangeable with the library’s 48-LQFP diagram, so the PCB land pattern must be created from the manufacturer drawing rather than adjusted by scaling a neighboring package.
Design the 1.8 V to 3.6 V power tree so the MCU and every attached peripheral share a valid voltage range. Use local high-frequency bypassing and a bulk reservoir near the regulator output. Account for startup current, peripheral load, and regulator tolerance rather than checking only the nominal 3.3 V rail. If the product also uses 5 V signals, use direction-controlled level shifters instead of relying on MCU internal protection diodes.
Do not treat an S08RD-family MCU as automatically interchangeable merely because the package and core are similar. Check flash capacity, RAM, temperature grade, clock behavior, reset values, peripheral multiplexing, programming interface, and lifecycle status for each exact ordering code. The 8 KB options require a firmware-size review, while the 32 KB options may require application-code timing and memory-map validation. Record the approved substitution in the design documentation.
Keep clock routing short and away from switching-power nodes, relays, and high-current LED drivers. Use continuous ground references beneath signal paths, terminate external communication lines according to the relevant interface specification, and add protection close to external connectors. For long or noisy input lines, use suitable filtering and conditioning before the signal reaches the MC9S08RD16CFG I/O pins.
تعمیل کی معلومات
The MC9S08RD16CFG marketplace record identifies the device as RoHS compliant. No additional compliance declaration was established.