MC9S12XDT384MPV - 16-Bit 384KB Flash Automotive MCU | NXP
MPN: MC9S12XDT384MPV ✓ فعالMC9S12XDT384MPV جائزہ
An automotive microcontroller is an embedded semiconductor that executes control software, reads sensors, controls actuators, and manages communication interfaces within a vehicle. The HCS12X family combines a 16-bit MCU with higher-performance execution capabilities and belongs to the broader embedded-controller hierarchy: HCS12X automotive MCU, embedded microcontroller, semiconductor, and electronic component. It is intended for applications where deterministic control, connectivity, and operating reliability are important.
Verified distributor data identifies the MC9S12XDT384MPV with 384 KB of flash, an 8 MHz clock, a 10-bit ADC, and a 2.35 V to 2.75 V supply range. Its 112 gull-wing terminals make it suited to designs requiring numerous external signals, mixed automotive subsystems, and dedicated communication or control functions. The automotive temperature classification identifies the part for vehicle-oriented designs, although detailed temperature limits were not present in the supplied verification data.
The MC9S12XDT384MPV is associated with the S12XD family and is intended for automotive multiplexing applications. Its architecture and peripheral mix should be evaluated against the specific vehicle network, actuator load, sensor signal range, memory requirements, and qualification obligations. Because the available data does not provide verified operating-temperature, memory-map, communication-protocol, or ADC-performance details, those values must be confirmed in the manufacturer datasheet before design release.
Typical application domains include body and multiplexing control modules, automotive gateway logic, distributed vehicle controllers, sensor-conditioning systems, actuator controllers, and embedded automotive communication hubs. The 112-terminal LQFP package exposes more I/O than a small controller package and can reduce the need for external interface expansion when the board area permits.
When selecting this MCU, verify package dimensions, pin multiplexing, supply sequencing, clock requirements, peripheral availability, automotive qualification status, and software-tool support. Do not assume that a distributor cross-reference result guarantees pin-to-pin or software compatibility.
This page consolidates verified distributor specifications, sourcing information, package details, application guidance, and explicit data gaps. It is intended to accelerate initial engineering review while preserving traceability to the supplied manufacturer and distributor records.
کے لیے ڈراپ اِن متبادل MC9S12XDT384MPV — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں MC9S12XDT384MPV (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package.
S912XDT384J1MAG
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MC9S12XDT384
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
S912XDT384J1MAG
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MC9S12XDT384MPV زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | 16-bit HCS12X automotive microcontroller |
| Architecture | HCS12X |
| Flash Memory | 384 KB |
| زیادہ سے زیادہ کلاک فریکوئنسی | 8 MHz |
| ADC Resolution | 10 bit |
| Supply Voltage Range | 2.35 V to 2.75 V |
| پیکیج | LQFP-112 (20 x 20 mm) |
| Terminal Count | 112 terminals |
| Terminal Form | Gull wing |
| Package Shape | Square |
| Temperature Grade | Automotive |
| Target Application | Automotive multiplexing |
| Microcontroller Classification | MCU/MPU/SOC |
| Manufacturer | NXP Semiconductors |
| Core Performance | 32-bit performance with 16-bit MCU advantages and efficiencies |
MC9S12XDT384MPV square پن کنفیگریشن گائیڈ
MC9S12XDT384MPV (square پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MC9S12XDT384MPV.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
MC9S12XDT384MPV کے لیے موزوں ہے 6 ایپلیکیشنs: Automotive Multiplexing Controller, Vehicle Sensor Interface Module, Automotive Actuator Control, Vehicle Communication Gateway, Body-Control Distributed Module, Automotive Power and Status Monitor.
Automotive Multiplexing Controller
MC9S12XDT384MPV fits an automotive multiplexing controller because the verified listings identify automotive-grade classification, HCS12X architecture, 384 KB of flash, and an 8 MHz clock. The device can host application software for coordinating multiple vehicle inputs and outputs while using its 112-terminal LQFP package for numerous external signals. The 10-bit ADC is useful for monitoring selected analog conditions, although channel count and conversion timing are not provided. Design validation must confirm communication peripherals, pin multiplexing, timing, and vehicle-level qualification before release.
تجویز کردہ
Vehicle Sensor Interface Module
The MC9S12XDT384MPV is suitable as a candidate for a vehicle sensor-interface module where an automotive MCU must combine local control with analog monitoring. Its verified 10-bit ADC and 2.35 V to 2.75 V supply range support designs that operate from a regulated low-voltage rail. The 384 KB flash capacity provides embedded application storage, while the 112-terminal package exposes substantial I/O. Input protection, sensor excitation, calibration, ground layout, and ADC accuracy require confirmation from the complete manufacturer datasheet.
تجویز کردہ
Automotive Actuator Control
MC9S12XDT384MPV can be evaluated for actuator-control functions because it provides an automotive-grade HCS12X platform, 384 KB of flash, and a high-pin-count LQFP package. The available I/O can support logic and control connections around drivers, while the 8 MHz operating point and 10-bit ADC can participate in feedback and monitoring functions. The part is not a power driver itself, so transistor selection, flyback protection, thermal design, and diagnostic behavior must be designed around it. Verify output timing and automotive qualification evidence before production use.
تجویز کردہ
Vehicle Communication Gateway
MC9S12XDT384MPV may suit a communication-gateway concept that coordinates vehicle networks and distributed control functions. The verified 384 KB flash and 112-terminal LQFP package provide memory and connection resources for embedded protocol handling, while the HCS12X family is specifically associated with automotive multiplexing. Actual interface support is not listed in the supplied data, so CAN, LIN, Ethernet, or other protocol availability must be verified in the datasheet. Gateway designs also need deterministic timing, bus protection, watchdog strategy, and failure-mode analysis.
تجویز کردہ
Body-Control Distributed Module
MC9S12XDT384MPV can be considered for a distributed body-control module when the design needs automotive-grade processing and a large package pin count. The verified 384 KB flash supports embedded control software, and the 10-bit ADC can support selected analog supervision where required. The 2.35 V to 2.75 V operating range is compatible with a properly regulated vehicle electronics rail. The design must confirm pin multiplexing, wake-up behavior, low-power requirements, diagnostic coverage, ESD protection, and qualification details that are not present in the supplied records.
تجویز کردہ
Automotive Power and Status Monitor
MC9S12XDT384MPV may be evaluated for a vehicle status-monitoring function that combines digital control with analog supervision. Its 10-bit ADC is a verified feature, and the 384 KB flash can store application code, calibration tables, and diagnostic logic. The 8 MHz HCS12X platform provides the processing identity associated with the S12XD family, while the 112-terminal package offers more external connections than a compact controller. Verify ADC channel mapping, sampling behavior, sensor input limits, supply tolerances, and automotive environmental requirements before selecting it.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا MC9S12XDT384MPV — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | S912XDT384J1MAG | MC9S12XDT384 | S912XDT384J1MAG |
|---|---|---|---|---|
| Package | LQFP-112 (20 x 20 mm) | LQFP-112 (20 x 20 mm) | LQFP-112 (20 x 20 mm) | LQFP-112 (20 x 20 mm) |
| Brand | NXP Semiconductors | Freescale Semiconductor | Freescale Semiconductor | NXP Semiconductors |
اہم امتیازی خصوصیات
- Explicit automotive multiplexing positioning (بمقابلہS912XDT384J1MAG)
- Verified core resource set (بمقابلہMC9S12XDT384)
- High-pin-count package for distributed vehicle control (بمقابلہS912XDT384J1MAG)
ڈیزائن نوٹس
The verified operating range is 2.35 V to 2.75 V, so the power tree must deliver a regulated rail within that range across temperature, load, and automotive transients. Place the regulator, decoupling capacitors, and controller close enough to maintain supply integrity. Confirm the datasheet's absolute maximum voltage, startup requirements, and external component recommendations before finalizing the rail.
The MC9S12XDT384MPV uses a 112-terminal gull-wing LQFP in a 20 mm by 20 mm square package. Follow the exact manufacturer land pattern rather than relying only on the generic package name. Pay particular attention to fanout density, via-in-pad restrictions, solder mask, thermal-via strategy, and routing clearance around all 112 terminals. The supplied data does not include a verified pin map, so do not assign signals from the package description alone.
Do not treat the distributor cross-reference results as proof of drop-in compatibility. A valid replacement must match the package, pinout, memory map, clock setup, ADC routing, peripheral availability, startup behavior, software model, and automotive qualification requirements. In particular, verify the orderable suffix and manufacturer documentation for S912XDT384J1MAG or MC9S12XDT384 before substituting them into a released board.
Automotive multiplexing designs should separate sensitive analog and communication routing from high-current or switching paths. Use a continuous ground strategy, place input filtering near the relevant pins, and validate signal integrity for each external bus. The verified 10-bit ADC does not establish input bandwidth or channel count, so analog routing and sampling requirements must be derived from the complete manufacturer datasheet.
تعمیل کی معلومات
The supplied records identify the part as automotive grade but do not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements. Compliance must be verified from current manufacturer or authorized-distributor documentation.
