MCP3426A4-E/MC - 16-Bit Dual-Channel Delta-Sigma ADC
MPN: MCP3426A4-E/MC ✓ فعالMCP3426A4-E/MC جائزہ
A delta-sigma ADC is a type of analog-to-digital converter that uses continuous-time oversampling, noise shaping, and digital filtering to produce high-resolution conversion results. It belongs to the broader ADC and data-converter hierarchy, where the MCP3426 family occupies the precision-measurement segment rather than the high-speed conversion segment. The delta-sigma architecture is especially useful when low noise and high effective resolution matter more than rapid acquisition.
The MCP3426A4 provides conversion resolution up to 16 bits, two analog input channels, and a factory-programmed I2C address. Its integrated precision reference is rated at 2.048 V and establishes a differential input range of plus or minus 2.048 V. The A4 gain-code variant is identified as a 15 sps device, making it appropriate for slow-changing sensor signals, industrial process measurements, and instrumentation where output filtering is preferred over high conversion throughput.
Microchip describes the MCP3426 as part of the low-noise, high-accuracy MCP342X family. The device combines differential input measurement with an onboard reference and digital interface in a compact DFN package. Because each channel uses differential sensing, common-mode voltage can be rejected when the signal source is arranged around the reference midpoint, provided the source remains within the device's allowable input range.
Typical applications include bridge and strain-gauge signal conditioning, pressure and temperature sensor acquisition, laboratory instrumentation, low-level DC voltage measurement, and embedded industrial monitoring. The dual-channel configuration also allows a system to measure two related signals, such a differential sensor output and a diagnostic or reference channel, without requiring two separate converter packages.
PCB design should prioritize a low-noise ground and reference layout, short analog traces, and placement of input and reference bypass capacitors close to their associated pins. Differential routing should be symmetric and avoid switching-node crossings. Before using the ±2.048 V differential range, verify the signal amplitude, common-mode voltage, gain-code implications, and downstream digital scaling against the manufacturer's pin and electrical-characteristics tables.
کے لیے ڈراپ اِن متبادل MCP3426A4-E/MC — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں MCP3426A4-E/MC (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Differential Input Range, Package, Conversion Rate, Converter Type, Digital Interface.
MCP3426A2-E/MC
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MCP3426A3-E/MC
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MCP3426A6-E/MC
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MCP3426A7-E/MC
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MCP3427A4-E/MC
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MCP3426A4-E/MC زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| ADC Resolution | 16 bit |
| Number of Input Channels | 2 channels |
| Input Configuration | Differential |
| Architecture | Delta-sigma |
| Conversion Rate | 15 samples/s |
| Internal Reference Voltage | 2.048 V |
| Differential Input Range | ±2.048 V |
| Digital Interface | I2C |
| I2C Address | Factory-programmed |
| پیکیج | 8-DFN (2 x 3 mm) |
| ماؤنٹنگ ٹائپ | Surface mount |
MCP3426A4-E/MC 8-dfn (2 x 3 mm) پن کنفیگریشن گائیڈ
MCP3426A4-E/MC (8-dfn (2 x 3 mm) پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MCP3426A4-E/MC.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
MCP3426A4-E/MC کے لیے موزوں ہے 6 ایپلیکیشنs: Temperature and Pressure Sensor Acquisition, Strain-Gauge and Load-Cell Measurement, Laboratory and Process Instrumentation, Low-Level DC Voltage Monitoring, Battery and Power-System Monitoring, IoT and Environmental Sensor Nodes.
Temperature and Pressure Sensor Acquisition
The MCP3426A4-E/MC fits slow industrial sensor channels because it provides 16-bit resolution at 15 samples per second with differential inputs. It can digitize ratiometric bridge outputs, resistance-based temperature probes, and pressure transmitters when the signal remains within the ±2.048 V differential range established by the 2.048 V internal reference. Place the converter near the sensor to minimize susceptible analog traces, and allow the conversion pipeline to settle before reading each result. Compared with a high-speed SAR ADC, the MCP3426 architecture favors low-level accuracy and filtering rather than rapid sampling.
تجویز کردہ
Strain-Gauge and Load-Cell Measurement
The dual differential inputs of the MCP3426A4-E/MC are useful for measuring the small bipolar output of strain gauges, load cells, and bridge-based pressure sensors. Its 16-bit resolution and 2.048 V reference are suited to instrumentation where excitation drift and amplifier offset must be resolved carefully. The 15 samples/s rate is normally sufficient for static force or slowly changing load measurements. Apply differential routing with matched geometry and keep the analog return path continuous; also verify input bias-current effects because high-impedance sensor networks can require buffering or longer settling intervals.
تجویز کردہ
Laboratory and Process Instrumentation
The MCP3426A4-E/MC can serve as the measurement front end in laboratory meters, process monitors, and calibration equipment that favor low noise over high sample rate. Two differential channels allow one converter to handle a measurement input and a related diagnostic channel, reducing board area in multi-channel instruments. The delta-sigma conversion method is well suited to slow sensor signals that can be digitally averaged or filtered. Use the I2C interface for configuration and code retrieval, and check the conversion timing and digital filter settling behavior before defining a complete acquisition cycle.
تجویز کردہ
Low-Level DC Voltage Monitoring
The MCP3426A4-E/MC is appropriate for monitoring low-level bipolar DC voltages where a 16-bit result and differential measurement improve signal integrity. Its ±2.048 V differential range can accommodate small transducer outputs around the reference midpoint without requiring the full single-ended input span. At 15 samples per second, the device favors stable process variables over transients. Designers should confirm the source impedance and common-mode limits, terminate unused inputs according to the manufacturer guidance, and isolate high-impedance nodes from digital switching currents to preserve the usable noise floor.
تجویز کردہ
Battery and Power-System Monitoring
A compact 8-DFN package and two differential inputs make the MCP3426A4-E/MC suitable for monitoring currents, voltages, or ratiometric signals in embedded power systems. Differential sensing can reject voltage offsets common to both input leads when the source and input arrangement support that measurement principle. The 15 samples per second rate is appropriate for thermal, charge, and slow bus monitoring rather than protection loops requiring immediate response. Design the signal chain so the measured voltage remains inside the converter's input range, and consider the ADC's startup, reference settling, and I2C polling overhead when implementing periodic measurements.
تجویز کردہ
IoT and Environmental Sensor Nodes
The MCP3426A4-E/MC suits compact IoT environmental-monitoring nodes that measure humidity, temperature, pressure, or gas-sensor outputs with high resolution and limited board area. Two channels can support separate sensors without requiring separate ADC packages, and the I2C interface suits a microcontroller-centered architecture. The 15 samples/s conversion rate matches periodic telemetry from slow-changing environmental conditions while avoiding unnecessary conversion activity. Keep the analog section physically separated from radio and switching-supply traces, use local decoupling, and account for sensor excitation, self-heating, and settling in the final measurement timing.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا MCP3426A4-E/MC — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | MCP3426A2-E/MC | MCP3426A3-E/MC | MCP3426A6-E/MC | MCP3426A7-E/MC | MCP3427A4-E/MC |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 8-DFN (2 x 3 mm) | 8-DFN (2 x 3 mm) | 8-DFN (2 x 3 mm) | 8-DFN (2 x 3 mm) | 8-DFN (2 x 3 mm) | 8-DFN (2 x 3 mm) |
| Resolution | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit |
| Input Channels | 2 differential channels | 2 differential channels | 2 differential channels | 2 differential channels | 2 differential channels | 2 differential channels |
| Architecture | Delta-sigma | Delta-sigma | Delta-sigma | Delta-sigma | Delta-sigma | Delta-sigma |
| Conversion Rate | 15 samples/s | 2.5 samples/s | 5 samples/s | 37.5 samples/s | 93.75 samples/s | 15 samples/s |
| Internal Reference | 2.048 V | 2.048 V | 2.048 V | 2.048 V | 2.048 V | 2.048 V |
| Differential Input Range | ±2.048 V | ±2.048 V | ±2.048 V | ±2.048 V | ±2.048 V | ±2.048 V |
| I2C Address | Factory-programmed | Factory-programmed | Factory-programmed | Factory-programmed | Factory-programmed | User-selectable options |
اہم امتیازی خصوصیات
- Lower-rate precision conversion within the same MCP3426 family (بمقابلہMCP3426A6-E/MC)
- Higher-rate option when measurement latency becomes important (بمقابلہMCP3426A3-E/MC)
- Factory-programmed bus address simplifies a fixed design (بمقابلہMCP3427A4-E/MC)
ڈیزائن نوٹس
Route each differential input as a compact, symmetric pair and keep the analog section away from switching nodes and high-current return paths. Place input filtering components close to the ADC pins, with their grounded return connected into a quiet analog-ground region. The compact 8-DFN footprint leaves little room for error, so confirm land geometry, exposed-pad connection, and assembly clearance against the manufacturer package drawing before releasing artwork.
Treat the MCP3426A4-E/MC as a precision measurement front end rather than a high-bandwidth converter. Verify source impedance, common-mode voltage, differential amplitude, and the time allowed for the output to settle before selecting filter resistance and capacitance. A high source impedance can increase settling error with the internal sampling network, while excessively low resistance can increase loading. Use the manufacturer's input model and recommended external components when calculating the final acquisition path.
Provide local supply decoupling at the device and preserve a low-impedance return from the reference and analog sections. Separate reference-current return from digital-clock return where practical, and avoid routing analog inputs beneath or immediately beside an I2C switching net. Check the power-up sequence against the I2C bus state because a held or released supply rail can affect whether the host controller can communicate with the converter during startup.
Do not treat ±2.048 V as the absolute maximum input rating or the supply range. Check the common-mode limits, differential input range, absolute maximum conditions, and gain-code configuration separately. Also verify that the factory-programmed I2C address does not conflict with another device on the bus. The MCP3427 family is not an automatic address-compatible replacement unless its address-selection pins are configured to reproduce the required bus address.
تعمیل کی معلومات
A distributor listing associates the MCP3426A4-E/MC with AEC-Q100 qualification, but the manufacturer product documentation and official declaration are required for formal compliance conclusions. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require manufacturer declarations.