Microchip Technology

MCP3462T-E/NC - 16-Bit Dual-Channel ADC | Microchip

MPN: MCP3462T-E/NC ✓ فعال
3 V Vdss 20-pin UQFN Package
MOQ: 1 |

MCP3462T-E/NC جائزہ

Microchip Technology MCP3462T-E/NC is a 16-bit, dual-channel delta-sigma analog-to-digital converter with a maximum programmable data rate of 153.6 kSPS, an SPI interface, an internal oscillator, an internal temperature sensor, and a 20-pin UQFN package measuring 3 x 3 mm.

A delta-sigma ADC is a type of analog-to-digital converter that uses oversampling, digital filtering, and noise shaping to provide high-resolution conversion from low-bandwidth analog signals. Within the data-conversion hierarchy, the MCP3462 belongs to the ADC > delta-sigma ADC > data-converter IC > semiconductor category. It is intended for precision measurement systems that prioritize resolution and integrated conversion features rather than ultra-high-speed waveform capture.

The MCP3462 provides four single-ended input channels or two differential input channels, allowing one converter to handle multiple measurement inputs. Its 16-bit nominal resolution supports detailed digital representation of analog measurements, while the programmable output data rate reaches 153.6 kSPS. The converter also includes an SPI interface for communication with a host controller, an internal oscillator for clock operation, and an internal temperature sensor for monitoring conditions near the device.

Operationally, the MCP3462 combines a delta-sigma conversion stage with digital filtering and serial output. Digital filtering reduces out-of-band noise but can influence the usable bandwidth and conversion latency associated with the selected data rate. Designers should therefore select the conversion-rate setting according to both the required signal bandwidth and the timing behavior expected by the sampling system rather than treating the maximum rate as the operating target for every measurement.

Typical uses include industrial process monitoring, precision sensor acquisition, battery and power-system measurement, laboratory instrumentation, environmental monitoring, and low-frequency data-acquisition systems. The combination of differential or multiplexed single-ended inputs, a 3 V supply indication, and a compact 3 x 3 mm package supports compact analog front ends where board area and measurement density matter.

A key design consideration is analog layout. Keep input traces short, maintain a continuous ground reference, and place input filtering and bypass components close to their associated pins. Because delta-sigma ADCs depend on digital filtering and stable clocking, evaluate the interaction among acquisition bandwidth, output data rate, SPI clocking, reference stability, and firmware timing before finalizing the signal chain.

This product page combines the converter's core electrical characteristics with package, application, selection, and design guidance. It also distinguishes the target device from the pin-compatible MCP3462R family option, whose onboard voltage reference is a meaningful engineering difference when designing new analog measurement boards.

کے لیے ڈراپ اِن متبادل MCP3462T-E/NC — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

MCP3462R-E/NC

✅ ڈراپ-اِن
📦 20-pin UQFN (3 x 3 mm)
Onboard voltage reference is included, while MCP3462T-E/NC uses a reference arrangement without the onboard reference; remaining channel, data-rate, and interface characteristics should match within 10%.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

MCP3462T-E/NC زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

ADC Type Delta-sigma ADC
Nominal Resolution 16 bit
Number of Input Channels 2 channels
Single-Ended Input Configuration 4 inputs
Differential Input Configuration 2 inputs
Maximum Programmable Data Rate 153.6 kSPS
Digital Interface SPI
Internal Oscillator Integrated
اندرونی درجہ حرارت سینسر Integrated
سپلائی وولٹیج 3 V
پیکیج 20-pin UQFN
Package Dimensions 3 x 3 mm
ماؤنٹنگ ٹائپ Surface Mount
Input Type Single-ended or differential
Analog-to-Digital Conversion Single conversion architecture

MCP3462T-E/NC 3 x 3 mm پن کنفیگریشن گائیڈ

MCP3462T-E/NC (3 x 3 mm پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

MCP3462T-E/NC کے لیے 3 x 3 mm پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MCP3462T-E/NC.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

MCP3462T-E/NC کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Process Monitoring, Precision Sensor Acquisition, Battery and Power-System Monitoring, Environmental Monitoring, Laboratory Instrumentation, Low-Frequency Data Acquisition.

🏭

Industrial Process Monitoring

The MCP3462T-E/NC fits industrial process-monitoring designs that measure several slowly changing sensor outputs with a compact converter. Its four single-ended or two differential input options allow a single IC to support multiplexed measurements, while the 16-bit resolution provides detailed numerical results for control and reporting systems. The maximum programmable rate of 153.6 kSPS offers flexibility for temperature, pressure, flow, and level signals. Designers should configure the data rate to the actual sensor bandwidth because digital filtering, conversion latency, and settling time must remain consistent with the control loop. Its 3 x 3 mm 20-pin UQFN package also helps reduce analog-front-end area on compact measurement boards.

📡

Precision Sensor Acquisition

The MCP3462T-E/NC is appropriate for precision sensor interfaces that benefit from differential conversion and 16-bit resolution. Two differential inputs can monitor bridge, current-sense, or other balanced sensor outputs when the analog front end keeps common-mode voltage and noise within the converter's operating conditions. Four single-ended inputs provide an alternative for multiplexed ratiometric or referenced measurements. SPI simplifies connection to an embedded controller, while the programmable data rate of up to 153.6 kSPS allows the acquisition rate to be matched to the sensor's useful bandwidth rather than operating the converter faster than necessary.

⚡

Battery and Power-System Monitoring

The MCP3462T-E/NC can support battery-management and power-system monitoring where pack voltage, cell voltage, current, and temperature must be measured with a compact ADC. Its 16-bit resolution and configurable input arrangement are useful for deriving state-of-charge or state-of-health information, while the integrated temperature sensor provides a local thermal measurement. The 153.6 kSPS maximum data rate is more than adequate for many low-bandwidth battery variables. Designers should still use suitable divider or current-sense networks, define protection for external transients, and coordinate digital filtering with the battery-management algorithm and control-loop timing.

🧩

Environmental Monitoring

The MCP3462T-E/NC supports compact environmental-monitoring systems that combine temperature, humidity, gas, or light sensing with periodic digital acquisition. Four single-ended inputs allow several external sensors to share a measurement front end, while two differential inputs can serve balanced sensor arrangements. The 16-bit conversion resolution preserves small variations in slowly changing environmental signals, and the programmable rate up to 153.6 kSPS permits the output rate to be reduced when longer conversion intervals are preferable. Firmware must account for filter settling and conversion timing, while PCB layout should isolate sensitive analog traces from digital switching activity.

🔧

Laboratory Instrumentation

The MCP3462T-E/NC is well suited to laboratory instruments that acquire low-bandwidth analog quantities with high resolution and a compact digital interface. Examples include programmable measurement front ends, calibration equipment, and bench-top monitoring modules. Four single-ended inputs offer flexibility for multiplexed test points, while differential inputs can improve performance with balanced sensor stages. SPI transfers results to a controller without requiring a parallel data bus, and the 20-pin 3 x 3 mm UQFN package supports dense instrument front ends. The acquisition software should request a suitable output rate and wait for the converter's settling behavior before taking a measurement.

🖥️

Low-Frequency Data Acquisition

The MCP3462T-E/NC is useful in low-frequency data-acquisition modules that record pressure, position, load, temperature, or other analog process variables. A 16-bit delta-sigma ADC combined with digital filtering can provide stable numerical results when the source bandwidth is well below the 153.6 kSPS maximum rate. The SPI interface enables efficient connection to a microcontroller, digital controller, or communications processor, while four single-ended inputs support multiplexed channels. Engineers should account for input settling after channel selection, synchronize acquisition timing with the SPI transaction, and implement calibration suitable for the selected reference and analog front end.

تجویز کردہ پروڈکٹس کا خلاصہ

MCP3462R-E/NC Pin-compatible family option with an onboard voltage reference استعمال ہوتا ہے: Industrial Process Monitoring, Precision Sensor Acquisition, Environmental Monitoring, Laboratory Instrumentation MCP3462T-E/NC Microchip Technology استعمال ہوتا ہے: Battery and Power-System Monitoring, Low-Frequency Data Acquisition
What is the MCP3462T-E/NC?
The MCP3462T-E/NC is a Microchip Technology 16-bit, dual-channel delta-sigma ADC capable of four single-ended or two differential inputs. According to the Microchip MCP3462 product page and the manufacturer datasheet listing, it reaches a programmable data rate of up to 153.6 kSPS and uses an SPI interface. It is housed in a compact 20-pin UQFN package measuring 3 x 3 mm, making it appropriate for space-conscious precision acquisition and process-control systems.
What is the maximum conversion rate of MCP3462T-E/NC?
The MCP3462T-E/NC supports a maximum programmable data rate of 153.6 kSPS. This figure describes the highest conversion-output rate for the converter rather than the bandwidth of every analog input filter. According to the MCP3462 manufacturer documentation, engineers should configure the digital filter and output rate for the measurement bandwidth, conversion latency, and host sampling requirements of the target system.
How many input channels does MCP3462T-E/NC have?
The MCP3462T-E/NC supports four single-ended input channels or two differential input channels. This dual-mode arrangement allows the converter to handle multiplexed unipolar measurements or differential sensor outputs without changing the converter package. According to the MCP3462 manufacturer documentation, differential operation generally supports better rejection of common-mode disturbance when the sensor output and analog front end are arranged appropriately.
Does MCP3462T-E/NC use SPI?
Yes, the MCP3462T-E/NC uses a serial peripheral interface, or SPI, to transfer conversion commands and digital results to a host controller. The SPI connection keeps the external interface compact while supporting configuration of operating modes, data rates, and channel selection. According to the MCP3462 manufacturer documentation, host firmware must observe the converter's timing requirements when polling results or handling continuous conversions.
Where can I download the MCP3462T-E/NC datasheet PDF?
The manufacturer product page for MCP3462 is the appropriate starting point for the MCP3462T-E/NC datasheet PDF and associated documentation. The product page identifies the device as a 16-bit delta-sigma ADC with four single-ended or two differential inputs and a maximum rate of 153.6 kSPS. Use the package pinout, electrical characteristics, and digital interface sections to confirm PCB connections and operating limits before releasing a layout.
Where is the MCP3462T-E/NC pinout located?
The MCP3462T-E/NC pinout is located in the pin-description section of the manufacturer datasheet. The device uses a 20-pin UQFN package with a 3 x 3 mm body, and the exposed thermal pad must be handled according to the package drawing and land-pattern instructions. Assign PCB nets directly from the manufacturer pin table rather than inferring connectivity from the four single-ended or two differential input functions.
What is the difference between MCP3462T-E/NC and MCP3462R?
The key documented difference is that the MCP3462R includes an onboard voltage reference, while the MCP3462 does not. The Microchip product page identifies MCP3462R as the preferred pin-compatible option for new designs. For MCP3462T-E/NC, the reference-voltage arrangement must therefore be evaluated carefully; the newer MCP3462R option may simplify reference implementation when its remaining electrical and ordering details match the design.
When should I choose MCP3462T-E/NC over MCP3462R?
Choose MCP3462T-E/NC when its documented channel configuration, data rate, SPI interface, package, and external reference arrangement match an existing design or qualification plan. Choose MCP3462R for a new design when its onboard voltage reference simplifies the analog subsystem and the complete electrical characteristics remain acceptable. Microchip describes MCP3462R as pin compatible and preferred for new designs, making the reference implementation a decisive selection criterion.
What is the best drop-in replacement for MCP3462T-E/NC?
The MCP3462R family is the directly identified pin-compatible replacement path for MCP3462T-E/NC because Microchip explicitly states that MCP3462R is pin compatible and preferred for new designs. Its principal functional difference is the inclusion of an onboard voltage reference, which the MCP3462 lacks. Before substitution, verify the exact package suffix, reference-voltage requirements, electrical limits, temperature range, and production ordering details in the manufacturer documentation.
Can MCP3462R replace MCP3462T-E/NC?
MCP3462R can serve as a pin-compatible option for MCP3462T-E/NC, according to the Microchip product page. The meaningful design change is the onboard voltage reference included with MCP3462R, which is absent from MCP3462. Confirm the exact ordered MCPN and package configuration, then review how the external reference network connects so the substitution preserves signal accuracy and meets the intended measurement specification.
Is MCP3462T-E/NC suitable for industrial process measurement?
The MCP3462T-E/NC is suitable for industrial process measurement when the signal bandwidth and latency match the selected data rate. It combines 16-bit resolution, four single-ended or two differential inputs, an SPI interface, and a maximum programmable rate of 153.6 kSPS. According to the manufacturer documentation, robust implementation also depends on suitable analog filtering, grounded PCB layout, and control over digital-filter settling behavior.
Is MCP3462T-E/NC suitable for battery management measurement?
The MCP3462T-E/NC can support battery-management measurement when the required current, voltage, and temperature channels fall within its four-single-ended or two-differential input arrangement. Its 16-bit resolution is useful for deriving control information from slowly changing battery signals, while the internal temperature sensor supports local thermal monitoring. Design the front end for the battery voltage range and verify protection, filtering, and accuracy requirements independently.
How much power-supply noise matters for MCP3462T-E/NC?
The MCP3462T-E/NC operates from a 3 V supply, so supply integrity directly affects conversion accuracy and reference stability. Place the supply bypass capacitor close to the device and route return currents without sharing narrow paths with analog inputs. Although the exact noise, current, and PSRR figures must be taken from the manufacturer electrical-characteristics table, the practical rule is to keep the analog and digital return currents controlled near the converter.
Where can I buy MCP3462T-E/NC and check its price and lead time?
Use the Request a Quote form on this page to request the current MCP3462T-E/NC price, stock status, lead time, and order quantity. The structured listing records do not expose a qualifying quantity-break price table for the exact MPN, so no static price or availability claim is appropriate. Confirm the final order suffix and packaging requirements when submitting the quotation request.
What are the key specifications of MCP3462T-E/NC that engineers should know?
The MCP3462T-E/NC is a 16-bit delta-sigma ADC with four single-ended or two differential inputs, a programmable data rate up to 153.6 kSPS, an SPI interface, an integrated oscillator, an integrated temperature sensor, and a 20-pin 3 x 3 mm UQFN package. According to the Microchip product page, it is a 3 V device. These specifications position it for precision, medium-bandwidth acquisition rather than high-frequency waveform capture.

کے لیے انجینئرنگ ریفرنس ڈیٹا MCP3462T-E/NC — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose MCP3462T-E/NC when an existing design uses a 3 V, 16-bit dual-channel delta-sigma ADC and its external-reference arrangement satisfies the measurement accuracy requirements. Its four single-ended or two differential inputs, SPI interface, internal oscillator, internal temperature sensor, and 153.6 kSPS maximum rate make it suitable for industrial monitoring, precision sensors, battery systems, and compact data-acquisition equipment. Consider MCP3462R-E/NC for a new PCB when its onboard voltage reference reduces reference-circuit complexity. Microchip identifies MCP3462R as pin compatible and preferred for new designs, so compare its complete electrical characteristics before changing the selected MPN. If the target design requires reference simplicity, choose MCP3462R. If it already depends on the MCP3462 external-reference arrangement, the target MCP3462T-E/NC can preserve that architecture while providing 16-bit dual-channel conversion in a compact 20-pin UQFN package.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ MCP3462R-E/NC
Brand Microchip Technology Microchip Technology
Package 20-pin UQFN (3 x 3 mm) 20-pin UQFN (3 x 3 mm), pin compatible
Nominal Resolution 16 bit 16 bit
Internal Voltage Reference No onboard voltage reference Onboard voltage reference included

اہم امتیازی خصوصیات

  • Directly identified pin-compatible family alternative (بمقابلہMCP3462R-E/NC)
  • Onboard reference simplifies new-design reference implementation (بمقابلہMCP3462R-E/NC)
  • Compact dual-channel acquisition in a small package (بمقابلہMCP3462R-E/NC)

ڈیزائن نوٹس

Route the four analog inputs directly from their source networks to the converter and keep switching nodes, high-current returns, and digital clock traces away from the input pins. Place analog filtering close to the converter so unwanted energy is attenuated before it reaches the sampling network. Maintain a continuous ground plane and provide a short return path from the bypass capacitor to the device ground pins.

Configure the converter's data rate according to the real signal bandwidth. A lower rate generally narrows the useful measurement bandwidth and changes digital-filter settling behavior, while the 153.6 kSPS maximum should not be selected without accounting for latency and host timing. After changing channels or operating modes, allow the required settling interval before interpreting the next conversion result.

Place the 3 V bypass capacitor and any external reference components close to their corresponding pins, and connect the exposed pad according to the manufacturer's package drawing. Keep the analog reference path away from SPI switching activity. Validate the complete PCB using the manufacturer land pattern rather than constructing a UQFN footprint solely from the package dimensions, since pad and mask geometry affect assembly and thermal performance.

Do not assume that MCP3462R is interchangeable without reviewing the onboard voltage reference difference. The reference implementation, calibration method, and external circuitry may need to change even when the package and pins align. Also confirm the exact ordered suffix, operating-temperature grade, and lifecycle status before treating the family-level pin compatibility as a complete production substitution.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

No explicit compliance declaration was identified for the exact MCP3462T-E/NC order code. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status using the exact manufacturer ordering information before qualification.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-10 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

mcp3462 datasheet MCP3462T-E/NC datasheet MCP3462T-E/NC datasheet pdf MCP3462T-E/NC pinout MCP3462T-E/NC specifications MCP3462T-E/NC equivalent MCP3462T-E/NC replacement MCP3462T-E/NC vs MCP3462R-E/NC MCP3462T-E/NC 16 bit ADC MCP3462T-E/NC 153.6 kSPS MCP3462T-E/NC SPI interface MCP3462T-E/NC UQFN-20 MCP3462T-E/NC price MCP3462T-E/NC stock

متعلقہ اجزاء اور اصطلاحات

Microchip Technology MCP3462T-E/NC MCP3462 MCP3462R-E/NC analog-to-digital converter ADC delta-sigma ADC data-converter IC semiconductor 16-bit resolution 153.6 kSPS SPI serial peripheral interface single-ended input differential input internal oscillator internal temperature sensor onboard voltage reference 20-pin UQFN QFN package family surface mount industrial process monitoring precision sensor acquisition battery management data acquisition
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں