NXP Semiconductors

MKL25Z32VLK4 - 48MHz Cortex-M0+ 32KB MCU | NXP

MPN: MKL25Z32VLK4 ✓ فعال
1.8 V / 2.5 V / 3.3 V Vdss 80-pin LQFP (12 x 12 mm) Package 48 MHz Speed 32 KB (32K x 8) Memory
MOQ: 1 |

MKL25Z32VLK4 جائزہ

The NXP Semiconductors MKL25Z32VLK4 is a 32-bit Kinetis KL2 microcontroller with a 48 MHz Arm Cortex-M0+ core, 32 KB of flash memory, 4 KB of SRAM, and full-speed USB support in an 80-pin LQFP package measuring 12 x 12 mm. The device belongs to the Kinetis KL2x ultra-low-power family and supports operation from 1.8 V, 2.5 V, or 3.3 V supply levels.

A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, volatile data memory, and peripherals into one package. The Arm Cortex-M0+ core provides a compact, energy-efficient architecture for embedded control, while the Kinetis family extends this core with low-power operating modes, general-purpose I/O, communication peripherals, and USB connectivity. In the system hierarchy, the MKL25Z32VLK4 is a microcontroller, semiconductor, and programmable embedded-control component.

Key features include a 48 MHz operating frequency, 32 KB flash organized as 32K x 8, and 4 KB SRAM. The KL2x family adds a full-speed USB 2.0 controller, with the selected device identified as supporting full-speed USB OTG. Its 80-LQFP package provides 80 external terminals, making it suitable for designs that need broader peripheral access than smaller MCU packages can offer while avoiding a ball-grid-array assembly.

The MKL25Z32VLK4 is based on the Arm Cortex-M0+ instruction set, which prioritizes compact code size and efficient real-time control rather than high-performance computing. Its 32 KB flash stores the application firmware, while 4 KB SRAM supports stack space, variables, buffers, and USB or serial-data handling. The manufacturer describes the Kinetis KL2x family as ultra-low-power and notes compatibility with other Kinetis KL1x, KL2x, KL3x, and KL4x devices for migration paths, subject to peripheral and pin-level review.

Typical applications include USB-connected data acquisition, compact control panels, industrial sensor nodes, wearable accessories, and embedded USB peripherals. The 48 MHz Cortex-M0+ core is useful for responsive control tasks, and the integrated USB controller can simplify connectivity compared with a discrete USB interface. A board-level design still needs suitable voltage regulation, clocking, decoupling, USB routing, and firmware configuration.

Designers should match the exact 80-pin LQFP footprint and verify peripheral assignments, USB implementation details, and board-level connectivity against the NXP documentation before layout. Stable supply voltage and correctly sized local decoupling are fundamental because processor and USB activity can produce fast transient current. USB signal routing also requires controlled impedance and careful placement of the protection and termination network.

This product page combines the exact NXP and distributor identification, distinguishes verified electrical facts from unspecified details, identifies same-family migration candidates, and highlights PCB, power, and USB design considerations that help engineers evaluate the MKL25Z32VLK4 beyond a basic catalog description.

کے لیے ڈراپ اِن متبادل MKL25Z32VLK4 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

MKL25Z32VLH4

✅ ڈراپ-اِن
📦 80-LQFP (12 x 12 mm)
Same 48 MHz Cortex-M0+ and 32 KB flash ratings, with an automotive-oriented ordering option; core-frequency difference is 0 MHz and flash difference is 0 KB

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

MKL25Z32VKK4

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 80-LQFP (12 x 12 mm)
Same-family 32 KB flash and 48 MHz architecture with a different temperature-grade order code; core-frequency difference is 0 MHz and flash difference is 0 KB

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

MKL25Z32VMC4

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 80-LQFP (12 x 12 mm)
Same-family 32 KB flash and 48 MHz architecture with a different order code; core-frequency difference is 0 MHz and flash difference is 0 KB

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

MKL25Z32VNC4

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 80-LQFP (12 x 12 mm)
Same-family 32 KB flash and 48 MHz architecture with a different order code; core-frequency difference is 0 MHz and flash difference is 0 KB

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

MKL25Z32VPC4

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 80-LQFP (12 x 12 mm)
Same-family 32 KB flash and 48 MHz architecture with a different order code; core-frequency difference is 0 MHz and flash difference is 0 KB

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

MKL25Z32VLK4 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type 32-bit microcontroller
Product Family Kinetis KL2
Processor Core Arm Cortex-M0+
Maximum CPU Frequency 48 MHz
Flash Memory 32 KB (32K x 8)
SRAM 4 KB
Architecture 32-bit RISC
USB Version USB 2.0 full-speed
USB Controller Type Full-speed USB 2.0 OTG controller
Supply Voltage Options 1.8 V / 2.5 V / 3.3 V
پیکیج 80-pin LQFP (12 x 12 mm)
Terminal Count 80 terminals
Package Family LQFP
ماؤنٹنگ ٹائپ Surface mount
Temperature Grade Industrial
لائف سائیکل کی حالت Active

MKL25Z32VLK4 lqfp پن کنفیگریشن گائیڈ

MKL25Z32VLK4 (lqfp پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

MKL25Z32VLK4 کے لیے lqfp پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MKL25Z32VLK4.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

MKL25Z32VLK4 کے لیے موزوں ہے 6 ایپلیکیشنs: USB Industrial Sensor Node, Compact Data Acquisition Controller, USB Wearable Accessory, Human Interface Control Panel, USB Test and Measurement Adapter, USB Connected Embedded Peripheral.

🏭

USB Industrial Sensor Node

The MKL25Z32VLK4 fits a USB industrial sensor node that must combine periodic measurement, local control, and host communication. Its 48 MHz Arm Cortex-M0+ core provides useful interrupt latency for sensor servicing and control tasks, while 32 KB flash accommodates firmware for acquisition, filtering, configuration, and USB enumeration. The 4 KB SRAM provides space for variables, stacks, and short data buffers. Full-speed USB 2.0 OTG lets the product connect directly as a USB peripheral without a separate USB controller. The trade-off is the relatively large 12 x 12 mm, 80-pin LQFP footprint and the need for careful USB routing, stable supply regulation, and local decoupling around the MCU and transceiver circuitry.

📊

Compact Data Acquisition Controller

The MKL25Z32VLK4 is appropriate for a compact data-acquisition controller combining an Arm Cortex-M0+ processor, local buffering, and a full-speed USB interface. A 48 MHz execution rate supports interrupt-driven sampling and control without requiring a higher-complexity processor. The 32 KB flash budget is suitable for acquisition firmware, calibration tables, USB descriptors, and protocol handlers, while 4 KB SRAM can be divided among sample buffers, stacks, and communication state. The integrated full-speed USB 2.0 OTG capability can simplify enclosure and cabling compared with a discrete USB bridge. Engineering considerations include confirming the required timer and serial-peripheral resources, budgeting SRAM during worst-case interrupt nesting, and validating signal integrity on the USB differential pair.

📱

USB Wearable Accessory

The MKL25Z32VLK4 can serve as the control MCU in a USB-connected wearable accessory where compactness, low-power behavior, and deterministic control are important. Its 48 MHz Cortex-M0+ core is suitable for managing button inputs, indicator states, sensor updates, and USB communication, and the Kinetis KL2x family is positioned as an ultra-low-power MCU family. The 32 KB flash and 4 KB SRAM provide a workable split between resident firmware and volatile working data for small accessories. Full-speed USB OTG allows a compact connection topology. The principal trade-offs are the 80-terminal LQFP footprint relative to a micro-BGA or small leadless package, plus the need to keep unused peripherals disabled and place the USB and power paths carefully on a crowded board.

🖥️

Human Interface Control Panel

The MKL25Z32VLK4 is suitable for a human-interface control panel that combines button or encoder handling, status LEDs, display updates, and USB configuration. Its 80-pin LQFP package offers a larger external I/O budget than compact low-pin-count MCUs, reducing the need for an I/O expander when several panel functions are required. The 48 MHz Cortex-M0+ core can service display and input tasks, and 32 KB flash leaves room for interface firmware, fonts, and configuration logic. The 4 KB SRAM should be monitored closely when combining display buffering, USB reception, and event handling. Compared with a smaller MCU, this part simplifies pin multiplexing at the cost of PCB area and a larger exposed thermal and routing burden.

🔧

USB Test and Measurement Adapter

The MKL25Z32VLK4 can form the control section of a USB test and measurement adapter that receives commands, validates data, and returns results to a host computer. Full-speed USB 2.0 OTG supports direct enumeration, while the 48 MHz Arm Cortex-M0+ core can execute protocol parsing, timing tasks, and instrument-state management. Its 32 KB flash is adequate for compact firmware, and 4 KB SRAM can support command buffers and intermediate results. An engineer must verify the required precision timers, serial channels, and analog measurement channels before selecting this exact device. USB clocking, impedance-controlled routing, ESD protection, and a stable power source remain critical to dependable bench behavior.

🧩

USB Connected Embedded Peripheral

The MKL25Z32VLK4 is a strong candidate for a USB-connected embedded peripheral such as a configuration adapter, interface bridge, or compact control accessory. The Cortex-M0+ architecture provides efficient 32-bit processing, and the 48 MHz clock supports responsive command handling and peripheral updates. With 32 KB flash and 4 KB SRAM, the device can host a focused firmware image without immediately requiring external memory. Full-speed USB 2.0 OTG integrates the host-facing interface into the MCU family, reducing component count. Design trade-offs include confirming USB host-versus-device implementation details, checking whether the selected board needs crystalless USB operation, and allocating board area for the 80-pin package, decoupling, programming access, and USB protection.

تجویز کردہ پروڈکٹس کا خلاصہ

MKL25Z32VLK4 NXP Semiconductors استعمال ہوتا ہے: USB Industrial Sensor Node, Compact Data Acquisition Controller, USB Wearable Accessory, Human Interface Control Panel, USB Test and Measurement Adapter, USB Connected Embedded Peripheral MKL25Z32VLH4 Related 32 KB Kinetis KL2 device استعمال ہوتا ہے: USB Industrial Sensor Node, USB Connected Embedded Peripheral MKL25Z32VKK4 Same-family Kinetis KL2 option استعمال ہوتا ہے: Compact Data Acquisition Controller MKL25Z32VMC4 Related same-family order code استعمال ہوتا ہے: USB Wearable Accessory MKL25Z32VNC4 Related Kinetis KL2 migration candidate استعمال ہوتا ہے: Human Interface Control Panel MKL25Z32VPC4 Same-family configuration candidate استعمال ہوتا ہے: USB Test and Measurement Adapter
What are the key specifications of MKL25Z32VLK4 that engineers should know?
The MKL25Z32VLK4 combines a 48 MHz Arm Cortex-M0+ core with 32 KB flash, 4 KB SRAM, and full-speed USB 2.0 OTG in an 80-pin LQFP package. According to the NXP product page, the device is an active member of the ultra-low-power Kinetis KL2x family. Its 1.8 V, 2.5 V, and 3.3 V supply options support both conventional and lower-voltage embedded systems.
What is the operating frequency of MKL25Z32VLK4?
The MKL25Z32VLK4 operates at up to 48 MHz. This figure comes from the exact manufacturer and distributor identification for the part, which describes it as a 32-bit Arm Cortex-M0+ microcontroller. The frequency is suitable for event-driven control, data acquisition, human-interface processing, and USB peripheral firmware where fast interrupt handling is more important than desktop-class computation.
How much memory does MKL25Z32VLK4 have?
The MKL25Z32VLK4 provides 32 KB of flash memory, organized as 32K x 8, and 4 KB of SRAM. The NXP product material identifies the flash capacity and the KL2x family specification identifies the SRAM size. Designers should reserve part of both memories for firmware, stack, variables, and USB data buffers.
Does MKL25Z32VLK4 support USB?
Yes. The MKL25Z32VLK4 includes full-speed USB 2.0 OTG capability as part of the Kinetis KL2x family. According to the NXP product page, the KL2x family adds a full-speed USB 2.0 On-The-Go controller to the low-power Kinetis MCU architecture. Board implementation still requires correct USB data routing, power, grounding, and software support.
What package does MKL25Z32VLK4 use?
The MKL25Z32VLK4 uses an 80-pin LQFP package measuring 12 x 12 mm. Exact product records identify the package as 80-FQFP or 80-LQFP, and another technical record describes it as 80-LQFP. The package has gull-wing leads and is intended for surface-mount assembly.
Where can I download the MKL25Z32VLK4 datasheet?
The official MKL25Z32VLK4 documentation is available through the NXP product page at https://www.nxp.com/part/MKL25Z32VLK4. That page provides the data sheet and product-change information for the exact orderable MPN. Use the manufacturer document for pin assignments, electrical limits, clock requirements, USB implementation, and recommended application circuits.
Where can I find the MKL25Z32VLK4 pinout?
The MKL25Z32VLK4 pinout is identified in the manufacturer data sheet linked from the NXP product page. The exact part uses 80 terminals in a 12 x 12 mm LQFP package. Because the individual terminal names are not included in the catalog record, use the pin-description table in the NXP data sheet rather than relying on a generic 80-pin drawing.
What can replace MKL25Z32VLK4?
The closest documented migration choice is the NXP MKL25Z32VLH4, which retains a 32 KB flash configuration and an Arm Cortex-M0+ core while adding an automotive-oriented ordering option. NXP also indicates that KL2x devices share a migration path across Kinetis KL1x, KL2x, KL3x, and KL4x families. A true drop-in decision still requires exact pin, peripheral, voltage, timing, and qualification review.
Is MKL25Z32VLK4 the same as MKL25Z32VLH4?
They are closely related Kinetis KL2 devices, but they should not be treated as automatically identical. Both are described as Arm Cortex-M0+ MCUs with 32 KB flash, operation up to 48 MHz, and an 80-pin package. The documented distinction is the automotive ordering option associated with MKL25Z32VLH4, so qualification, temperature, and order-code requirements should be checked before substitution.
When should I choose MKL25Z32VLK4 over another 32KB Cortex-M0+ MCU?
Choose the MKL25Z32VLK4 when the design requires the specific combination of 48 MHz operation, 32 KB flash, 4 KB SRAM, full-speed USB 2.0 OTG, and an 80-pin LQFP footprint. Choose another MCU when its core, memory, package, peripheral mix, or qualification better matches the product. The 80-pin package offers extensive I/O access but requires a larger PCB footprint than a 32-pin or 48-pin MCU.
Is MKL25Z32VLK4 suitable for USB sensor and industrial control nodes?
The MKL25Z32VLK4 is suitable for compact USB-connected sensing and control nodes that need real-time response and a moderate memory footprint. Its 48 MHz Cortex-M0+ core supports interrupt-driven control, while 32 KB flash and 4 KB SRAM fit typical firmware and buffering tasks. Full-speed USB 2.0 OTG can reduce the need for a separate USB interface in appropriately designed equipment.
What supply voltage does MKL25Z32VLK4 use?
The MKL25Z32VLK4 supports 1.8 V, 2.5 V, and 3.3 V operating supply levels. These values are identified in the exact-part technical listing for this MPN. The selected regulator, decoupling network, clock source, and peripheral voltage limits must all be coordinated around the chosen operating point.
What is the lifecycle status of MKL25Z32VLK4?
NXP lists the MKL25Z32VLK4 as active on its official product page. That status indicates the part is currently offered rather than identified as obsolete or end-of-life. Designers should still monitor product-change notices and package or ordering information when planning long-lived programs.
Where can I buy MKL25Z32VLK4 and check its lead time?
Use the Request a Quote form on this page to request MKL25Z32VLK4 availability, current lead time, order quantity, and shipment details. The exact MPN is identified as active by NXP and appears in multiple authorized-channel listings. The quote form allows procurement to confirm the correct 80-LQFP ordering configuration without relying on a static price.
What is the price of MKL25Z32VLK4?
Use the Request a Quote form on this page for the current MKL25Z32VLK4 price, volume breaks, stock position, and expected lead time. Pricing for this exact 32 KB, 80-pin LQFP microcontroller can change with quantity and market conditions. The form provides a direct way to obtain a current quote for the exact MPN and required commercial terms.
Is MKL25Z32VLK4 in stock?
Current inventory for the MKL25Z32VLK4 should be confirmed through the Request a Quote form on this page. NXP identifies the MPN as active, and distributor records indicate that the part is commercially offered, but availability can vary by package, quantity, and shipment destination. Submit the required quantity and target date for a stock confirmation.

کے لیے انجینئرنگ ریفرنس ڈیٹا MKL25Z32VLK4 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose MKL25Z32VLK4 when the design needs the exact combination of an Arm Cortex-M0+ core, 48 MHz operation, 32 KB flash, 4 KB SRAM, full-speed USB 2.0 OTG, and an 80-pin LQFP footprint. It is especially suitable for USB sensor nodes, compact data-acquisition equipment, human-interface panels, and embedded accessories that need more I/O than a compact MCU provides. Choose MKL25Z32VLH4 when the project specifically requires the automotive-oriented order code, after confirming temperature and qualification requirements. The other listed Kinetis family candidates can serve as same-family migration options, but their exact order-code characteristics must be checked. Do not select a drop-in replacement based only on flash size and CPU frequency: USB device-versus-host behavior, pin multiplexing, clocking, temperature, package drawings, and firmware initialization can prevent interchangeability.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ MKL25Z32VLH4 MKL25Z32VKK4 MKL25Z32VMC4
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 80-LQFP (12 x 12 mm) 80-LQFP (12 x 12 mm) 80-LQFP (12 x 12 mm) 80-LQFP (12 x 12 mm)
Processor Core Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
Maximum CPU Frequency 48 MHz 48 MHz 48 MHz 48 MHz
Flash Memory 32 KB 32 KB 32 KB 32 KB

اہم امتیازی خصوصیات

  • Specific USB-enabled 32 KB Kinetis configuration (بمقابلہMKL15Z32VLK4)
  • Full 80-terminal package for broader external connectivity (بمقابلہMKL25Z32VKK4)
  • Industrial-grade ordering path for embedded equipment (بمقابلہMKL25Z32VLH4)

ڈیزائن نوٹس

Place the required local decoupling capacitors directly beside the MKL25Z32VLK4 supply and ground terminals, following the capacitor values and placement specified in the NXP data sheet. Keep the USB transceiver, regulator, and MCU return currents in a controlled path so switching and digital return current does not add noise to sensitive analog or USB reference circuitry. Account for transient current when the 48 MHz core and USB peripheral become active.

Use the exact 80-pin LQFP land pattern and verify every terminal assignment against the NXP pin-description table. An 80-terminal package exposes more functions than many smaller MCUs, which increases routing flexibility but also creates opportunities for errors in high-speed signals. Preserve the manufacturer's guidance for oscillator routing, USB data pairs, programming signals, and unused pins rather than applying generic assumptions from another 80-pin device.

Route the USB D+ and D+ pair as a short, continuous differential pair on a consistent reference plane, avoiding splits, stubs, and unrelated high-current paths. Match the implemented trace geometry to the board's calculated controlled-impedance requirement, and position USB protection components according to the manufacturer recommendations. Validate the completed board for eye quality and compliance with the applicable USB electrical requirements.

Do not treat all Kinetis KL2 order codes as automatically interchangeable. Before replacing MKL25Z32VLK4, compare the exact pin table, temperature grade, flash and SRAM configuration, USB operating mode, clock requirements, package drawing, qualification status, and programming sequence. Pay particular attention to crystal versus crystalless USB behavior, because a firmware difference can prevent an otherwise pin-compatible substitution from operating correctly.

Estimated: power dissipation depends on the selected supply voltage, CPU load, USB activity, and ambient temperature, so calculate it from the final operating condition rather than from the maximum clock rate alone. Use the NXP thermal information for the 80-LQFP package and provide copper area and airflow consistent with the intended industrial environment. The 12 x 12 mm footprint provides more board area for heat spreading than a small leadless package.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

No definitive environmental or automotive qualification statements were included in the exact-part records. The industrial temperature-grade description applies to MKL25Z32VLK4, while the separate MKL25Z32VLH4 record is described as automotive. Refer to the current NXP product page and declarations for formal compliance.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-14 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

MKL25Z32VLK4 datasheet MKL25Z32VLK4 pinout MKL25Z32VLK4 datasheet pdf MKL25Z32VLK4 specifications MKL25Z32VLK4 equivalent MKL25Z32VLK4 replacement MKL25Z32VLK4 vs MKL25Z32VLH4 MKL25Z32VLK4 80-LQFP MKL25Z32VLK4 USB OTG MKL25Z32VLK4 48MHz NXP MKL25Z32VLK4 MKL25Z32VLK4 price MKL25Z32VLK4 stock

متعلقہ اجزاء اور اصطلاحات

NXP Semiconductors MKL25Z32VLK4 MKL25Z32VLH4 MKL25Z32VKK4 MKL25Z32VMC4 MKL25Z32VNC4 MKL25Z32VPC4 Kinetis KL2x Arm Cortex-M0+ microcontroller embedded microcontroller 32-bit RISC processor USB 2.0 OTG full-speed USB 32 KB flash memory 4 KB SRAM 48 MHz clock 80-LQFP package LQFP package family surface-mount technology industrial temperature grade automotive microcontroller USB sensor node data acquisition controller human interface control panel
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں