P3041NXN1NNB QorIQ P3041 Quad-Core e500mc MPU 1.333GHz | NXP
MPN: P3041NXN1NNB ✓ فعالP3041NXN1NNB جائزہ
A microprocessor is an integrated circuit that contains the arithmetic logic unit, control unit, registers, and cache memory of a computer system on a single silicon die. The P3041's Power Architecture e500mc core is a superscalar core with out-of-order execution, hardware-supported multithreading, and virtualization extensions, positioning it in the hierarchy of: microprocessor -> MPU -> embedded processor -> system-on-chip class SoC. The device integrates memory controllers, high-speed serial interfaces, and acceleration engines on-chip to support networking and telecom workloads.
Key features include four e500mc cores running up to 1.333 GHz, a shared 256 KB L2 cache per core plus a 2 MB platform cache, dual DDR3 memory controllers with ECC support, three 10-Gigabit Ethernet controllers (XAUI), eight Gigabit Ethernet controllers, four PCI Express 2.0 controllers, and a Serial RapidIO 2.1 interface. The part is rated for the extended industrial temperature range of -40C to +105C and qualified for ruggedized industrial and networking environments.
The P3041NXN1NNB is the 'NX' suffix variant meaning it is built on the 1.1 silicon revision, supports 1333 MHz core frequency, and is supplied without SEC (Security Engine) hardware. The NNB trailing suffix indicates the extended temperature grade and tray packaging per NXP's part-numbering convention. The 1295-ball FCBGA package requires multilayer PCB design with controlled-impedance routing and matched-length pairs for SerDes lanes.
Typical applications include multiservice routers, LTE base station baseband processing, industrial Ethernet gateways, and ruggedized networking appliances. The combination of quad cores, hardware-accelerated cryptography, and integrated multi-Gigabit Ethernet makes it suitable for mid-range control plane and data plane forwarding.
When designing with this device, allocate substantial PCB area for the FCBGA land pattern, follow NXP's reference design for DDR3 byte-lane DMX in conventional layouts, and provide adequate thermal relief through thermal vias and heatsink attach. The 1.333 GHz excitation creates a 750 ps clock period that mandates strict signal-integrity discipline for parallel interfaces.
This page synthesizes distributor pricing, drop-in alternative MPNs from the same P3041 family, and practical design notes not found in the manufacturer datasheet alone.
کے لیے ڈراپ اِن متبادل P3041NXN1NNB — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں P3041NXN1NNB (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Maximum Core Frequency, Memory Controller, Operating Temperature, Package, RoHS Status.
P3041NXE1PNB
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
P3041NXN1MMB
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →P3041NSN1NNB
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
P3041NXN1PNB
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →P3041NXE1NNB
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →P3041NXN1NNB زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core Architecture | PowerPC e500mc |
| Number of Cores | 4 |
| Maximum Core Frequency | 1.333 GHz |
| Silicon Revision | 1.1 |
| L2 Cache (per core) | 256 KB |
| Platform Cache | 2 MB |
| Memory Controller | Dual DDR3 with ECC |
| 10 Gigabit Ethernet | 3 XAUI interfaces |
| Gigabit Ethernet | 8 controllers |
| PCI Express | 4 x PCIe 2.0 controllers |
| Serial RapidIO | 1.0 Serial RapidIO 2.1 interface |
| Security Engine (SEC) | Not included (no SEC variant) |
| آپریٹنگ درجہ حرارت | -40C to +105C (extended) |
| پیکیج | 1295-ball FCBGA, 37.5 mm x 37.5 mm |
| ماؤنٹنگ ٹائپ | Surface Mount (BGA) |
P3041NXN1NNB 1295-ball fcbga, 37.5 mm x 37.5 mm پن کنفیگریشن گائیڈ
P3041NXN1NNB (1295-ball fcbga, 37.5 mm x 37.5 mm پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں P3041NXN1NNB.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
P3041NXN1NNB کے لیے موزوں ہے 6 ایپلیکیشنs: Multiservice Router Control Plane, LTE Base Station Baseband, Industrial Ethernet Gateway, Ruggedized Networking Appliance, Edge Router with Hardware Crypto, Smart Grid Substation Controller.
Multiservice Router Control Plane
The P3041NXN1NNB fits multiservice router control-plane and forwarding-plane processing thanks to its four e500mc cores running at 1.333 GHz and integrated 10-Gigabit Ethernet. The NXP QorIQ P3 family datasheet cites the part for service-provider router control plane and forwarding plane. Compared with a single-core PowerQUICC III part, the quad-core architecture handles OSPF and BGP route calculations alongside fast-path forwarding. Three XAUI interfaces connect to network processors or switch fabrics, while eight Gigabit Ethernet controllers provide flexible LAN/WAN connect points. The extended temperature grade fits the demanding climate controls of inside telecom central offices.
تجویز کردہ
LTE Base Station Baseband
The P3041NXN1NNB’s NXP QorIQ P3 platform fits LTE eNodeB baseband and Layer 2/3 processing, as documented in the P3041 family datasheet. With four e500mc cores at 1.333 GHz, the part executes LTE MAC scheduling, RLC, and PDCP while the integrated 10-Gigabit Ethernet carries digitized RF samples to the RF front end. Hardware multithreading on each core supports simultaneous protocol stack and PHY-control tasks. The extended -40C to +105C temperature grade allows outdoor small-cell siting where ambient temperatures are uncontrolled. The no-SEC configuration is acceptable when encryption is handled in a companion FPGA.
تجویز کردہ
Industrial Ethernet Gateway
The P3041NXN1NNB is well suited to ruggedized industrial Ethernet gateways bridging PROFINET, EtherCAT, and Modbus TCP traffic. The NXP QorIQ P3 datasheet cites the platform for industrial Ethernet applications thanks to deterministic multi-core performance and integrated multi-port Ethernet. Compared to a microcontroller-only solution, the 1.333 GHz e500mc cores handle firewall, VPN, and routing stacks that microcontrollers cannot address. The extended temperature grade fits outdoor cabinet deployments. The 1295-ball FCBGA package requires a substantial PCB but enables the multi-Gigabit connectivity the application requires.
تجویز کردہ
Ruggedized Networking Appliance
The P3041NXN1NNB is widely adopted by the ruggedized networking appliance market. With four cores at 1.333 GHz, the part handles intrusion detection, deep packet inspection, and flow logging at multi-Gigabit line rates. Compared with general-purpose server CPUs, the integrated 10-Gigabit and PCI Express controllers reduce board complexity. The extended temperature grade fits road-side traffic control and roadside cabinet installations. The no-SEC variant is preferred when cost is critical and IPSec is offloaded to a companion chip.
تجویز کردہ
Edge Router with Hardware Crypto
When hardware cryptography is required in an edge router, the P3041 family offers the same 1295-ball FCBGA with SEC enabled. The NXP QorIQ P3 platform datasheet documents SEC 4.0 hardware for IPSec, SSL, and MACsec acceleration. The P3041NXN1NNB is the no-SEC variant; engineers needing cryptography should select P3041NXE1PNB. Both parts share the same 1.333 GHz core frequency and the same DDR3 memory controller, allowing software reuse across the variants.
تجویز کردہ
Smart Grid Substation Controller
The P3041NXN1NNB fits smart-grid substation controller platforms where deterministic Ethernet and IEC 61850 GOOSE messaging matter. The NXP QorIQ P3 datasheet cites the platform for substation automation because of hardware virtualization, multi-port Ethernet, and extended temperature operation. The part's four e500mc cores run the protocol stack, SCADA gateway, and parallel protection logic simultaneously. Hardware-assisted virtualization allows bare-metal and Linux guest partitions to coexist for safety isolation. The extended -40C to +105C grade fits unconditioned substation cabinets.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا P3041NXN1NNB — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | P3041NXE1PNB | P3041NXN1MMB | P3041NSN1NNB | P3041NXN1PNB | P3041NXE1NNB |
|---|---|---|---|---|---|---|
| Package | 1295-FCBGA (37.5x37.5 mm) | 1295-FCBGA (37.5x37.5 mm) - same | 1295-FCBGA (37.5x37.5 mm) - same | 1295-FCBGA (37.5x37.5 mm) - same | 1295-FCBGA (37.5x37.5 mm) - same | 1295-FCBGA (37.5x37.5 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors - same brand | NXP Semiconductors - same brand | NXP Semiconductors - same brand | NXP Semiconductors - same brand | NXP Semiconductors - same brand |
| Core Architecture | PowerPC e500mc quad-core | PowerPC e500mc quad-core | PowerPC e500mc quad-core | PowerPC e500mc quad-core | PowerPC e500mc quad-core | PowerPC e500mc quad-core |
| Core Frequency | 1.333 GHz | 1.333 GHz | 1.333 GHz | ~1.0 GHz (~25% slower) | 1.333 GHz | 1.333 GHz |
| Silicon Revision | 1.1 | 1.1 | 1.1 | 1.1 | 1.1 | 1.1 |
| Security Engine (SEC) | Not included | Included | Not included | Not included | Included | Included |
| 10-Gigabit Ethernet | 3 XAUI | 3 XAUI | 3 XAUI | 3 XAUI | 3 XAUI | 3 XAUI |
| Operating Temperature | -40C to +105C (extended) | -40C to +105C (extended) | -40C to +105C (extended) | -40C to +105C (extended) | -40C to +105C (extended) | -40C to +105C (extended) |
اہم امتیازی خصوصیات
- Quad-core e500mc at 1.333 GHz with no SEC for cost-sensitive designs (بمقابلہP3041NXE1PNB)
- Extended temperature grade (-40C to +105C) (بمقابلہStandard P3041NSN1NNB)
- NX bin (1.333 GHz) vs NS bin (~1.0 GHz) for higher throughput (بمقابلہP3041NSN1NNB)
ڈیزائن نوٹس
The 1295-ball FCBGA on 1 mm pitch demands a multilayer PCB with microvia-in-pad construction and a dedicated ground/power plane stack-up. Place thermal vias in the die shadow region and follow NXP's reference design for ball-stiff-driven and conventional layouts. Matched-length routing is required for DDR3 byte-lanes and SerDes differential pairs; for pure-signal lanes, target 50 ohm single-ended and 100 ohm differential impedance with 5 mil traces.
Estimated: at 1.333 GHz across four cores at full load, the P3041NXN1NNB can dissipate roughly 8 to 12 W. The FCBGA package exposes the die through the top surface for heatsink attach; use a thermal vias under the die and a heatsink with thermal interface material rated for the extended temperature grade. Verify junction temperature at the worst-case ambient (105C) against the NXP thermal model before final sign-off.
DDR3 byte-lanes must be routed with matched lengths within 25 mil and 50 ohm single-ended impedance to the ZQ-calibrated termination. The 1.333 GHz core clock creates a 750 ps clock period that mandates strict signal-integrity discipline for parallel interfaces. For SerDes lanes (XAUI, PCIe, SRIO), follow the channel-loss budget in the NXP hardware specifications document and use pre-emphasis and equalization settings from the SerDes reference manual.
Do not assume the P3041NXN1NNB includes SEC hardware - the 'NNB' suffix means no SEC. If IPSec, SSL, or MACsec acceleration is required, choose a different P3041 part number with SEC. Also note that the 1.333 GHz grade requires different boot load and RC timing settings than the 1.0 GHz 'NS' bin; verify the bootloader matches the silicon revision at first prototype bring-up.
تعمیل کی معلومات
RoHS and REACH compliance per NXP product page; lead-free BGA balls confirmed. AEC-Q100 is not applicable because the part is a communications MPU rather than an automotive-grade IC.
