P5020NXN1TNB557 - QorIQ P5020 Dual-Core 64-bit Power SoC | NXP
MPN: P5020NXN1TNB557 ✓ فعالP5020NXN1TNB557 جائزہ
The QorIQ P5020 belongs to the broader Power Architecture (PowerPC) SoC hypernym hierarchy: QorIQ communications processor -> multi-core communications SoC -> application processor -> integrated circuit (IC) -> semiconductor. Originally developed by Freescale Semiconductor (acquired by NXP in 2015), the QorIQ family competes with Intel x86 networking SoCs and ARM-based network processors in routers, switches, base stations, and storage controllers. Its DataPath Acceleration Architecture (DPAA) provides hardware-accelerated packet classification, queueing, and crypto, enabling line-rate forwarding at 10 Gbps and beyond while leaving CPU cycles available for control-plane software.
Key features include dual e5500 cores at 2.0 GHz with hardware virtualization, integrated DDR3/DDR3L memory controller with ECC support, multiple 10 Gigabit Ethernet controllers, PCI Express Gen 2/3 controllers, Serial RapidIO, and hardware-accelerated cryptography (SEC 5.x) for IPsec, SSL/TLS, and bulk encryption. The SoC also integrates two 4-lane SerDes banks supporting a mix of SGMII, XAUI, KR, and PCIe physical interfaces, plus a 32-bit local bus, I2C, SPI, DUART, and GPIO for board-level connectivity.
Typical applications include multi-service routers, enterprise Layer 2/3 switches, LTE and 5G base-station baseband cards, network-attached storage (NAS) controllers, industrial gateways, and defense/aerospace embedded computing. The P5020NXN1TNB557 with industrial temperature rating is particularly suited to outdoor telecom cabinets, factory-floor control, and ruggedized military platforms.
When designing with this device, allocate a 12-layer or better PCB stack-up with matched-length impedance for 10 GbE and PCIe lanes, and provide a clean 1.0V core rail with bulk decoupling at the SoC's PD pads. The boot ROM supports eSPI and NAND flash boot; plan the RCW (reset configuration word) source carefully because field re-configuration requires hardware rework. Boot validation via CodeWarrior or U-Boot is recommended before integrating DPAA-based drivers.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical layout notes not found in the manufacturer datasheet alone.
کے لیے ڈراپ اِن متبادل P5020NXN1TNB557 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
P5040NXN1TNB557
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
P5020NSE1MMB
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
P5020NXE1TNB557
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
P5021NXN1TNB557
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
P5022NXN1TNB557
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
P5020NXN1TNB557 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| CPU Cores | 2 x Power Architecture e5500 (64-bit) |
| Core Frequency | Up to 2.0 GHz |
| L2 Cache (per core) | 512 KB |
| L3 Cache (shared) | 2 MB |
| Memory Controller | DDR3/DDR3L with ECC, up to 64-bit |
| 10 Gigabit Ethernet | 2 x 10 GbE (XFI/KR/XAUI) |
| Gigabit Ethernet | Up to 8 x SGMII/RGMII |
| PCI Express | Gen 2/3 controllers |
| Serial RapidIO | Yes (sRIO) |
| SerDes Lanes | Multiple (SGMII, XAUI, KR, PCIe) |
| Hardware Crypto | SEC 5.x (IPsec, SSL/TLS, bulk encryption) |
| DPAA | DataPath Acceleration Architecture |
| پیکیج | 1295-pin FC-PBGA |
| آپریٹنگ درجہ حرارت | -40C to +105C (industrial) |
| Process Node | 45 nm SOI |
P5020NXN1TNB557 1295-pin fc-pbga پن کنفیگریشن گائیڈ
P5020NXN1TNB557 (1295-pin fc-pbga پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں P5020NXN1TNB557.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
P5020NXN1TNB557 کے لیے موزوں ہے 6 ایپلیکیشنs: Enterprise Multi-Service Router, Layer 2/3 Aggregation Switch, LTE/5G Base Station Baseband Card, Network-Attached Storage Controller, Industrial IoT Gateway, Defense and Aerospace Embedded Computing.
Enterprise Multi-Service Router
The P5020NXN1TNB557's dual e5500 cores at 2.0 GHz and integrated 10 Gigabit Ethernet MACs make it well suited for enterprise multi-service routers handling line-rate forwarding at 10 GbE. Its DPAA (DataPath Acceleration Architecture) offloads packet classification, queueing, and crypto operations, freeing the e5500 cores to run routing protocols, RADIUS/TACACS+ authentication, and management-plane software. Designers typically pair this SoC with two DDR3L-1600 DIMM slots for route-table memory and use one PCIe Gen 2/3 lane to a discrete crypto accelerator card for legacy deployments. Compared with x86 networking SoCs, the P5020NXN1TNB557 delivers deterministic latency under load, which is critical for VoIP, video conferencing, and SLA-bound enterprise traffic.
تجویز کردہ
Layer 2/3 Aggregation Switch
Aggregation switches in enterprise and campus networks benefit from the P5020NXN1TNB557's combination of multi-protocol SerDes (SGMII, XAUI, KR) and DPAA-accelerated packet handling. The SoC drives both 10 GbE uplinks and a fabric of 1 GbE access ports while running Layer 2/3 forwarding tables in software on the e5500 cores. Hardware virtualization supports segmentation of management, control, and forwarding planes on the same silicon. The 1295-pin FC-PBGA package exposes enough I/O for direct attachment of multi-port PHYs without external bus switches, simplifying the BOM and reducing PCB layer count where it can be tolerated.
تجویز کردہ
LTE/5G Base Station Baseband Card
In LTE and 5G small-cell base stations, the P5020NXN1TNB557's hardware-accelerated SEC 5.x crypto and DPAA offload accelerate Layer 1/2 baseband processing and backhaul encryption. The -40C to +105C industrial temperature grade supports outdoor radio units and operator cabinets exposed to direct solar loading. Engineers typically pair this SoC with a dedicated RF front-end transceiver over Serial RapidIO (sRIO) or PCIe, retaining the e5500 cores for Layer 3 stack and SON (self-organizing network) functions. The integrated DDR3L controller with ECC handles the backhaul encryption working-set with low latency, which is essential for the deterministic scheduling required by 3GPP numerologies.
تجویز کردہ
Network-Attached Storage Controller
Network-attached storage (NAS) controllers and storage-area network (SAN) bridges benefit from the P5020NXN1TNB557's high-throughput PCIe, 10 GbE, and hardware-accelerated bulk encryption. The SoC manages RAID calculations and filesystem services while DPAA accelerates SMB/NFS/iSCSI protocol processing, and SEC 5.x offloads AES-XTS for at-rest encryption. The 2 MB shared L3 cache buffers metadata operations for low-latency random I/O, which is a common bottleneck in software-defined storage. Designers typically combine the P5020NXN1TNB557 with a PCIe switch to attach NVMe SSD banks, using the SoC's PCIe Gen 2/3 controllers as the upstream facing ports.
تجویز کردہ
Industrial IoT Gateway
Industrial IoT gateways operating on factory floors benefit from the P5020NXN1TNB557's industrial -40C to +105C temperature grade and its deterministic real-time performance running protocol-conversion stacks (OPC UA, Modbus/TCP, EtherNet/IP, MQTT). The SoC's DPAA offloads packet processing, leaving the e5500 cores free for application logic, edge analytics, and secure boot enforcement. Engineers integrate multiple SGMII ports to bridge brownfield field-bus segments, while the integrated SEC 5.x engine handles TLS/DTLS for upstream cloud links. The FC-PBGA package's high I/O count supports rich GPIO, SPI, and I2C connectivity to local sensor hubs and HMI panels.
تجویز کردہ
Defense and Aerospace Embedded Computing
Ruggedized defense and aerospace platforms use the P5020NXN1TNB557's industrial temperature grade to handle avionics bays, ground-vehicle electronics, and shipboard networking exposed to wide thermal swings. The Power Architecture e5500 cores support legacy real-time operating systems such as VxWorks and INTEGRITY that are widely deployed on PowerPC hardware in mission-critical systems. The SoC's hardware-accelerated cryptography and DPAA packet processing support secure tactical radios, encrypted video, and situational-awareness data links. Engineers pair the SoC with conformal-coated PCBs, redundant DIMM channels, and watchdogs driven by the SoC's SEC error paths.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا P5020NXN1TNB557 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | P5040NXN1TNB557 | P5020NSE1MMB | P5020NXE1TNB557 | P5021NXN1TNB557 | P5022NXN1TNB557 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 1295-pin FC-PBGA | 1295-pin FC-PBGA - same | 1295-pin FC-PBGA - same | 1295-pin FC-PBGA - same | 1295-pin FC-PBGA - same | 1295-pin FC-PBGA - same |
| CPU Cores | 2 x e5500 | 4 x e5500 | 2 x e5500 | 2 x e5500 | 1 x e5500 | 1 x e5500 |
| Core Frequency | Up to 2.0 GHz | Up to 2.0 GHz | Up to 2.0 GHz | Up to 2.0 GHz | Up to 2.0 GHz | Up to 2.0 GHz |
| Operating Temperature | -40C to +105C (industrial) | -40C to +105C (industrial) | 0C to +105C (commercial) | -40C to +105C (industrial) | -40C to +105C (industrial) | -40C to +105C (industrial) |
| 10 GbE MACs | 2 | 2 | 2 | 2 | 1 | 1 |
| L3 Cache | 2 MB shared | 2 MB shared | 2 MB shared | 2 MB shared | 512 KB | 512 KB |
| Hardware Crypto (SEC) | SEC 5.x | SEC 5.x | SEC 5.x | SEC 5.x | SEC 5.x | SEC 5.x |
اہم امتیازی خصوصیات
- Industrial temperature grade at the same price point as commercial QorIQ parts (بمقابلہP5020NSE1MMB)
- Drop-in upgrade to a 4-core P5040 with identical footprint (بمقابلہP5040NXN1TNB557)
- Lower-cost single-core variant for fixed-port designs (بمقابلہP5021NXN1TNB557)
ڈیزائن نوٹس
The 1295-pin FC-PBGA package requires a 12-layer or better PCB stack-up with matched-length impedance control for 10 GbE, PCIe, and sRIO SerDes lanes. Place the bulk of the decoupling capacitance directly under the BGA with via-in-pad to minimize inductance on the 1.0 V core rail. Differential-pair lengths should be tuned to within 5 mil of target for 10 GbE signals to keep the eye diagram closed across temperature.
Estimated: at 2.0 GHz dual-core active and 10 GbE in operation, total SoC power dissipation reaches approximately 15 to 22 W. Provide a high-current 1.0 V regulator capable of at least 25 A continuous with adaptive voltage scaling (AVS) support for the SoC's VID interface. Place thermal vias under the BGA exposed die area and pair them with a heatsink for industrial-temperature deployments.
Confirm the Reset Configuration Word (RCW) source before layout finalization because field reconfiguration requires hardware rework of the RCW pull-ups/downs. Validate the boot path with CodeWarrior or U-Boot early in the bring-up cycle, because silent DPAA misconfiguration can mimic memory faults and waste days of debugging. Always verify the orderable code (NX, NS, MM) matches the target temperature grade.
Multi-protocol SerDes lanes are configured per RCW; mixing SGMII, PCIe, and XAUI on the same SerDes bank requires careful lane-mapping at board design time. Use IBIS-AMI models from NXP for channel simulation and validate return loss against the 802.3 specifications. Avoid crossing SerDes lanes with high-current switching power paths to prevent coupled noise on the receive path.
تعمیل کی معلومات
RoHS and REACH compliance per NXP product declarations. AEC-Q100 not applicable - this is a networking SoC, not an automotive-qualified part.
