PEX8311RDK - PCI Express to Local Bus Bridge | Broadcom
MPN: PEX8311RDK ✗ اختتامِ زندگیPEX8311RDK جائزہ
A PCI Express to Generic Local Bus bridge is a specialized interface IC within the broader PCI Express interface-controller and semiconductor hierarchy. Unlike a conventional parallel host-bus controller, the device translates transactions between the PCI Express serial interface and a generic parallel local bus. Such bridges are useful when an existing local-bus peripheral, control ASIC, industrial subsystem, or proprietary interface must communicate through a PCI Express host without redesigning the remote device.
The verified information confirms three principal attributes: the device is a PCI Express to Generic Local Bus Bridge, the associated package is listed as 337-PBGA (21x21), and the PEX8311RDK is also presented as a development kit. Additional electrical and functional details, including supported link width, operating speed, local-bus width, voltage ratings, lane count, clock requirements, reference clock, and thermal data, are not present in the supplied source excerpts and therefore cannot be stated without risking inaccurate design guidance.
The development-kit format changes how the part should be selected. It is not merely an interface IC placed directly into an application PCB; it is a reference platform used to evaluate the PEX 8311, inspect its implementation, and develop system firmware or drivers. The Broadcom hardware reference manual identifies an SPI EEPROM connected through an 8-pin DIP socket and notes that the PEX 8311 utilities can program the EEPROM. This programming path is significant because device configuration can be stored locally rather than encoded entirely in host firmware.
Typical engineering uses include evaluating PCI Express interoperability, prototyping a generic local-bus interface, validating endpoint initialization, and creating reference firmware before integrating a bridge into a custom board. Because the supplied excerpts do not provide operating-temperature, RoHS, REACH, or qualification details, those characteristics should be confirmed against the applicable manufacturer documentation before production release. The package designation should likewise be checked against the intended device or module rather than inferred from the development-kit ordering code.
The primary design consideration is to distinguish evaluation hardware from a production interface solution. A reference design can expose useful startup and EEPROM behavior, but production designs still require board-level power integrity, clocking, signal-integrity, thermal, reset, and compliance validation. Designers should also verify connector accessibility, supported firmware utilities, host-platform compatibility, and local-bus electrical timing against their specific system requirements.
This page consolidates the verified manufacturer documentation, distributor identification, development-kit details, and technical-selection guidance available for PEX8311RDK. It also clearly separates confirmed facts from unavailable parameters, avoiding unsupported specifications and helping engineers determine whether the PEX 8311 platform is the correct basis for their PCI Express to Generic Local Bus Bridge evaluation.
کے لیے ڈراپ اِن متبادل PEX8311RDK — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔
متبادل کی درخواست کریںPEX8311RDK تفصیلات (مینوفیکچرر کی شائع کردہ)
| Product Type | PCI Express to Generic Local Bus Bridge development kit |
| Manufacturer | Broadcom |
| Original Manufacturer | PLX Technology |
| انٹرفیس ٹائپ | PCI Express to Generic Local Bus Interface |
| Associated Package | 337-PBGA (21x21) |
| Package Type | PBGA |
| Package Pin Count | 337 pins |
| Package Dimensions | 21 mm x 21 mm |
| SPI EEPROM Socket | 8-pin DIP socket |
| EEPROM Programming | External PROM programmer or PEX 8311 utilities |
PEX8311RDK انٹرفیس اور کنیکٹرز
PEX8311RDK مینوفیکچرر کی شائع کردہ درج ذیل انٹرفیس اور کنیکٹرز پیش کرتا ہے: ایکسپینشن / بسیں۔ ایکسپینشن ہیڈر پن آؤٹ، کنیکٹر پن نمبرنگ، اور برقی حدود مینوفیکچرر کی دستاویزات میں بیان کی گئی ہیں۔
| ایکسپینشن / بسیں | 8-pin DIP socket |
رجوع کریں مینوفیکچرر کی دستاویزات مکمل ایکسپینشن ہیڈر پن آؤٹ اور کنیکٹر پن نمبرنگ کے لیے۔
عام استعمالات
PEX8311RDK کے لیے موزوں ہے 6 ایپلیکیشنs: PCI Express Development Platform Evaluation, Generic Local Bus Interoperability Testing, SPI EEPROM Configuration Development, Legacy Bus Adapter Prototype, Industrial Control Interface Prototype, PCIe Endpoint Firmware Bring-Up.
PCI Express Development Platform Evaluation
The PEX8311RDK is suited to evaluating a PCI Express to Generic Local Bus Bridge implementation because the verified distributor records identify it as the PEX 8311 development kit. Engineers can use the documented platform to inspect PCIe connectivity, initialization behavior, and local-bus transactions before committing a custom PCB layout. The Broadcom hardware reference manual also documents a removable SPI EEPROM in an 8-pin DIP socket, allowing configuration to be programmed with an external PROM programmer or the supplied PEX 8311 utilities. This makes the platform useful for early hardware and firmware bring-up, although link width, maximum PCIe speed, local-bus width, and power requirements were not available in the verified excerpts.
تجویز کردہ
Generic Local Bus Interoperability Testing
The PEX8311RDK supports interoperability testing where a generic local bus must be accessed from a PCI Express host. The verified description confirms that the device bridges PCIe to a Generic Local Bus Interface, making it relevant for proving transaction flow, addressing, data transfer, and endpoint behavior before production integration. Because the supplied excerpts do not state the local-bus width, signaling standard, timing limits, or supported transaction types, engineers must obtain the full manufacturer documentation before finalizing a test matrix. The 337-PBGA (21x21) association and documented EEPROM programming workflow are the main verified design references.
تجویز کردہ
SPI EEPROM Configuration Development
The PEX8311RDK is particularly useful for developing and validating SPI EEPROM configuration procedures. The official Broadcom document result states that the SPI EEPROM is connected to an 8-pin DIP socket, allowing it to be removed and programmed with an external PROM programmer. The same result notes that the EEPROM can also be programmed through utilities provided for the PEX 8311. This dual path supports bench experiments, repeatable configuration recovery, and firmware-assisted provisioning. No EEPROM capacity, voltage, timing, or write-cycle details were included in the supplied source excerpts, so those values must be verified before programming production hardware.
تجویز کردہ
Legacy Bus Adapter Prototype
The PEX8311RDK can serve as the basis for prototyping an adapter that allows proprietary or legacy peripheral logic to communicate through a PCI Express system. The verified product description specifically identifies a PCI Express to Generic Local Bus Bridge, which is the relevant architecture for connecting a local-bus target to a PCIe host. During prototyping, engineers can validate software-visible device behavior and configuration loading while developing a custom board around the underlying PEX 8311 device. The supplied data does not define the local-bus electrical protocol, so final adaptation work requires the complete manufacturer documentation and system-level timing review.
تجویز کردہ
Industrial Control Interface Prototype
The PEX8311RDK may be used in an industrial control prototype when an existing local control ASIC or peripheral must be reached from a PCI Express host. The bridge function allows prototype software to exercise an industrial-facing subsystem without immediately designing a production bridge board. The confirmed 337-PBGA (21x21) device association provides a defined starting point for mechanical and electrical investigation, while the documented EEPROM arrangement simplifies repeatable configuration during development. Because no industrial temperature range, isolation rating, EMC result, or long-term availability information was supplied, the platform should remain an evaluation resource until production suitability is independently verified.
تجویز کردہ
PCIe Endpoint Firmware Bring-Up
The PEX8311RDK is applicable to firmware bring-up for a PCIe endpoint that communicates through the PEX 8311 bridge. Developers can use the documented configuration EEPROM and PEX 8311 utilities to establish a repeatable initialization sequence, then investigate enumeration, resource assignment, and local-bus access behavior. The verified Broadcom reference manual confirms the hardware programming path but does not provide driver versions, supported operating systems, PCIe link width, or maximum transfer rate in the supplied excerpt. Those software and link parameters must be checked in the complete manual before using the platform as a formal driver-development target.
تجویز کردہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PEX8311RDK — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ |
|---|---|
| Product Type | PCI Express to Generic Local Bus Bridge development kit |
| Brand | Broadcom |
| Package | 337-PBGA (21x21) associated package |
| PCI Express Interface | PCI Express |
| Generic Local Bus Interface | Supported |
| EEPROM Socket | 8-pin DIP socket |
| EEPROM Programming | External PROM programmer or PEX 8311 utilities |
| Package Dimensions | 21 mm x 21 mm |
| Pricing | Current distributor quotation required |
ڈیزائن نوٹس
Treat the development kit as an evaluation platform rather than a finished production power design. The supplied sources do not specify input rails, rail sequencing, current limits, or power-good behavior, so verify those requirements from the complete Broadcom hardware reference manual before connecting sensitive test equipment. Confirm the programmed EEPROM configuration and the board's power state before inserting or removing peripheral modules. Any custom board using the associated bridge must independently validate regulator tolerance, inrush, decoupling, and startup sequencing.
Use the official PEX 8311RDK hardware reference manual as the baseline for the associated 337-PBGA (21x21) footprint, local-bus routing, and test-point layout. The available search excerpts do not provide a ball map, reference designators, connector assignments, or stack-up requirements, so a pin-compatible PCB cannot be recreated safely from the package name alone. When transferring the design to custom hardware, review escape routing, reference-clock distribution, PCIe lane geometry, and local-bus length/return-path constraints against the complete mechanical and schematic documentation.
Do not confuse the RDK development platform with a bare production bridge or assume that any similarly described PCIe-to-local-bus IC is a drop-in replacement. The verified data provides no qualified alternate MPN, and the RDK includes board-level functions beyond the 337-PBGA device association. Before redesigning around another part, compare PCIe link capability, local-bus protocol and width, addressing behavior, EEPROM format, firmware support, pin mapping, package, and lifecycle status. An MPN-only cross-reference is insufficient for this platform.
Protect the configuration EEPROM workflow during development. The documented 8-pin DIP socket permits removal for external programming, but incorrect orientation, voltage compatibility, or an unapproved programming procedure could damage the device or corrupt the configuration. The Broadcom manual result also states that programming can be performed through PEX 8311 utilities. Record the exact utility version and configuration image, verify write completion, and retain a known-good EEPROM copy before attempting repeated configuration changes.
تعمیل کی معلومات
The supplied PEX8311RDK search results did not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements. These values remain unknown rather than being inferred from the manufacturer or package type.