PEX8616-BB50RBCF - PCIe Gen 2 16-Lane 4-Port Switch
MPN: PEX8616-BB50RBCF ✓ فعالPEX8616-BB50RBCF جائزہ
A PCI Express switch is a multiport interface IC that routes high-speed serial transactions between a root complex, endpoints, and other switches. It sits within the PCI Express hierarchy between a host or fabric and downstream devices, adding fanout, peer-to-peer routing, and configurable traffic management while preserving the layered PCIe protocol structure.
The BB silicon revision supports four PCIe Gen 2 ports and an aggregate configuration of 16 lanes. Signaling at 5.0 GT/s provides a nominal 500 MB/s payload bandwidth per direction on each Gen 2 lane. The 324-FCBGA package places the high-speed, power, ground, and auxiliary interfaces on a dense square land pattern that requires multilayer PCB construction and careful signal-integrity design.
The Broadcom PEX 8616 data book covers AA, AB, and BB silicon revisions, with production information centered on revision BB. Its documentation includes the ExpressLane architecture, configuration mechanisms, ordering information, electrical characteristics, reference designs, and application guidance needed to evaluate the switch in server, storage, accelerator, and embedded PCIe systems.
Typical uses include expanding a PCIe root port into four downstream links, connecting storage controllers to a host processor, supporting accelerator or network cards in multi-device chassis, and building server backplane fabrics. Exact port configuration and lane allocation must satisfy the device's supported partitioning rules and the electrical requirements of the selected system architecture.
PCB implementation is the main design consideration. A 324-ball FCBGA requires escape routing through inner layers, length matching for high-speed differential pairs, continuous reference planes, and careful power and ground distribution. Follow the Broadcom reference design for layer count, decoupling, connector geometry, trace widths, and via structures instead of deriving these details from general ball-grid-array practice.
This product overview combines the verified device identity, architecture, package details, sourcing links, drop-in family options, and practical implementation guidance. It also organizes the most useful PEX8616-BB50RBCF datasheet, pinout, equivalent, replacement, comparison, and application information into a design-focused reference for PCI Express engineers.
کے لیے ڈراپ اِن متبادل PEX8616-BB50RBCF — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
PEX8616-BB50RBCG
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PEX8616-AA50RBCF
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PEX8616-AB50RBCF
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PEX8616-AA50RBCG
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PEX8616-AB50RBCG
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PEX8616-BB50RBCF زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | PCI Express Gen 2 switch IC |
| PCIe Generation | Gen 2 |
| Maximum Data Rate | 5.0 GT/s |
| Total Lane Configuration | 16 lanes |
| Port Count | 4 ports |
| Silicon Revision | BB |
| پیکیج | 324-FCBGA, 19 mm x 19 mm |
| Terminal Count | 324 terminals |
| Terminal Form | Ball |
| Package Code | HBGA |
| Package Shape | Square |
| ماؤنٹنگ ٹائپ | Surface mount |
| Temperature Grade | Commercial |
| Product Classification | PCI bus controller / PCI interface IC |
| ExpressLane Architecture | 16-lane, 4-port PCI Express Gen 2 switch |
PEX8616-BB50RBCF square پن کنفیگریشن گائیڈ
PEX8616-BB50RBCF (square پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں PEX8616-BB50RBCF.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
PEX8616-BB50RBCF کے لیے موزوں ہے 6 ایپلیکیشنs: PCIe Server Storage Expansion, PCIe Accelerator Consolidation, Industrial PCIe Control System, PCIe Network Adapter Fabric, PCIe Storage Backplane, Embedded PCIe Module Expansion.
PCIe Server Storage Expansion
The PEX8616-BB50RBCF can provide a four-port PCI Express Gen 2 switching point for compatible server storage controllers. Its 16-lane total configuration and 5.0 GT/s signaling allow one upstream host link to be distributed across several downstream paths when lane partitioning permits. This topology can simplify chassis routing compared with connecting every storage controller directly to the root complex. The engineering trade-off is board complexity: a 324-FCBGA requires dense escape routing, multilayer construction, and careful connector placement. Confirm lane allocation, topology constraints, power limits, and the complete Broadcom reference stack-up before committing the design.
تجویز کردہ
PCIe Accelerator Consolidation
The PEX8616-BB50RBCF is suitable for consolidating compatible PCIe Gen 2 accelerator or processing cards behind a common host interface. Four downstream ports provide more attachment points than a typical single root port, while the 16-lane architecture permits a balanced configuration for multi-device systems. Because lane sharing reduces per-device bandwidth, the final partitioning must be checked against each accelerator's sustained throughput requirement. Keep high-speed differential routes short and preserve uninterrupted reference planes through the dense FCBGA escape region. Validate the complete board with the manufacturer reference design and confirm that the selected accelerator supports the intended PCIe topology.
تجویز کردہ
Industrial PCIe Control System
The PEX8616-BB50RBCF can be evaluated for industrial control and data-acquisition systems that need several compatible PCIe Gen 2 peripherals behind a single controller link. The four-port architecture supports flexible fanout for acquisition cards, communication controllers, or specialized processing modules, while the commercial temperature grade identifies the intended market segment. Industrial implementations must also address enclosure temperature, vibration, connector retention, isolation, and long product-life requirements separately from the switch specifications. Use the Broadcom PEX 8616 data book to verify the supported lane map and then follow its recommended power, decoupling, and layer-transition layouts.
تجویز کردہ
PCIe Network Adapter Fabric
The PEX8616-BB50RBCF can serve as a switching element in a PCIe networking fabric connecting compatible host and endpoint cards. Its four Gen 2 ports and 16-lane resource can support several network-oriented downstream links while maintaining a defined PCIe hierarchy. Designers must account for shared upstream bandwidth, peer-to-peer routing constraints, and the latency or redundancy requirements of the target network topology. High-speed traces require impedance control and careful via transitions, while power-supply routing must remain quiet enough for the switch and attached endpoints. Confirm that the networking endpoints support the proposed partitioning and that the final configuration is permitted by the Broadcom architecture.
تجویز کردہ
PCIe Storage Backplane
The PEX8616-BB50RBCF is applicable to PCIe Gen 2 storage backplanes where multiple compatible controllers or endpoint devices must share a host connection. Four downstream ports provide a practical fanout point, and the 16-lane architecture allows designers to select a lane allocation suited to the backplane. Connector placement, cable or board-channel loss, and auxiliary power delivery can become the limiting factors in long routes. Use the manufacturer reference layout for the FCBGA escape region, maintain continuous ground references, and avoid adding undocumented stubs. Validate the complete channel through simulation and measurement because the nominal 5.0 GT/s lane rate does not guarantee system margin without a compliant board implementation.
تجویز کردہ
Embedded PCIe Module Expansion
The PEX8616-BB50RBCF can be used when an embedded processor or module requires expansion from one PCIe interface to several downstream cards. The device's 16-lane, four-port Gen 2 architecture provides fanout for compatible modules such as storage, capture, communication, or specialized processing hardware. The main engineering constraint is PCB integration: a 19 mm by 19 mm FCBGA requires multiple escape layers, so the host board may need more routing resources than the external interface count suggests. Match the module's power requirements, confirm hot-plug or reset assumptions where applicable, and validate the topology against the Broadcom PEX 8616 data book. A production design should use the manufacturer's reference stack-up and measurement points.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PEX8616-BB50RBCF — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PEX8616-BB50RBCG | PEX8616-AA50RBCF | PEX8616-AB50RBCF | PEX8616-AA50RBCG | PEX8616-AB50RBCG |
|---|---|---|---|---|---|---|
| Brand | Broadcom | Broadcom | Broadcom | Broadcom | Broadcom | Broadcom |
| Package | 324-FCBGA (19 mm x 19 mm) | 324-FCBGA (19 mm x 19 mm) | 324-FCBGA (19 mm x 19 mm) | 324-FCBGA (19 mm x 19 mm) | 324-FCBGA (19 mm x 19 mm) | 324-FCBGA (19 mm x 19 mm) |
| PCIe Generation | Gen 2 | Gen 2 | Gen 2 | Gen 2 | Gen 2 | Gen 2 |
| Data Rate | 5.0 GT/s | 5.0 GT/s | 5.0 GT/s | 5.0 GT/s | 5.0 GT/s | 5.0 GT/s |
| Lane Count | 16 lanes | 16 lanes | 16 lanes | 16 lanes | 16 lanes | 16 lanes |
| Port Count | 4 ports | 4 ports | 4 ports | 4 ports | 4 ports | 4 ports |
| Silicon Revision | BB | BB | AA | AB | AA | AB |
| Terminal Count | 324 terminals | 324 terminals | 324 terminals | 324 terminals | 324 terminals | 324 terminals |
اہم امتیازی خصوصیات
- Production BB silicon revision (بمقابلہPEX8616-AA50RBCF)
- Closer revision alignment than AB options (بمقابلہPEX8616-AB50RBCF)
- Exact ordering-code alignment for RBCF BOMs (بمقابلہPEX8616-BB50RBCG)
ڈیزائن نوٹس
Implement the PEX8616-BB50RBCF escape region using the layer stack-up, trace geometry, via pattern, and reference-plane arrangement in the Broadcom PEX 8616 reference design. The 324-FCBGA cannot be treated like a conventional perimeter package: many high-speed, power, ground, and auxiliary connections must escape between the ball array. Maintain continuous reference planes, minimize via stubs, preserve differential impedance, and avoid changing stack-up without rerunning signal-integrity simulations.
Route each PCIe Gen 2 differential pair as a controlled-impedance pair with matched length and tightly controlled pair spacing. The PEX8616-BB50RBCF operates at 5.0 GT/s, so loss, discontinuity, crosstalk, and layer-transition vias can reduce receiver margin even when the schematic topology is correct. Follow the manufacturer escape and channel examples, avoid right-angle geometry, and verify the assembled board with the Broadcom-recommended measurement points before production release.
Follow the Broadcom PEX 8616 data book for power-supply topology, decoupling values, plane splits, and auxiliary-power requirements. Place required decoupling components directly at the associated package balls using short, low-inductance connections, and provide separate return paths for high-current and sensitive signal pins. Do not infer rail voltage or capacitor values from general PCIe guidance; both are device-specific and must be taken from the manufacturer documentation.
Do not approve a replacement solely because it is labeled as a PEX8616 or uses a 19 mm square package. Verify the complete ordering code, silicon revision, temperature grade, ball map, electrical characteristics, and supported lane partitioning for the specific board. PEX8616-BB50RBCG is the closest documented option, while AA and AB options require additional revision-level review. Keep configuration firmware and validation procedures aligned with the selected revision.
تعمیل کی معلومات
The component is identified as a commercial-temperature PCI Express switch. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation for the exact Broadcom ordering code.