PIC12CE519-04/SM - 8-Bit 4MHz OTP MCU with EEPROM | Microchip
MPN: PIC12CE519-04/SM ✓ فعالPIC12CE519-04/SM جائزہ
An 8-bit microcontroller (MCU) is a small computer-on-a-chip that combines a CPU, RAM, non-volatile program memory, and I/O peripherals on a single silicon die. Within the broader taxonomy, the PIC12CE519 belongs to the Microchip PIC10/12/16 mid-range family, which sits below 16-bit dsPIC and 32-bit PIC32 offerings but above 4-bit legacy controllers. The "OTP" designation indicates the program memory can be written only once, making this part suited for low-cost high-volume products where firmware is finalized at production.
Key features include 6 I/O pins with 25 mA source/sink capability per pin (sufficient to drive LEDs and small relays directly), four oscillator selections including an internal 4 MHz RC oscillator with programmable calibration, and a 200 ns instruction cycle for fast deterministic control loops. The part operates from 2.5 V to 5.5 V and supports a commercial temperature grade of 0 C to +70 C. The SOIJ-8 package (also referred to as 8-SOIJ) provides a low-profile SMT footprint approximately 5 mm long, suitable for space-constrained designs.
Architecturally, the PIC12CE519-04/SM uses a RISC Harvard architecture with separate program and data buses, 35 single-word instructions, and a hardware multiplier-free design optimized for low cost. The integrated 16-byte EEPROM is the primary differentiator versus the standard PIC12C508/509, allowing designers to store calibration constants, user settings, or serial numbers without an external memory chip. The four oscillator options include the calibrated internal 4 MHz RC, external RC, external crystal, and external clock modes.
Typical applications include low-cost consumer appliances, remote controls, LED lighting controllers, simple sensor interfaces, battery chargers, and white-goods subsystems where EEPROM-backed user settings and minimal PCB area matter. The 25 mA I/O drive eliminates the need for external transistors in many indicator or relay-driver circuits.
When designing with the PIC12CE519-04/SM, plan for in-system programming via ICSP (In-Circuit Serial Programming) since OTP cannot be reprogrammed; reserve an MCLR pull-up and dedicated ICSPCLK/ICSPDAT pins even if not used in production. The internal 4 MHz RC oscillator calibration register is factory-tuned but may drift over temperature; for timing-sensitive applications use an external crystal.
This page synthesizes distributor pricing (as of 2026-09-15), Microchip cross-reference alternatives, and practical design notes not consolidated in the standalone datasheet - useful for engineers evaluating a drop-in replacement or second-source qualification.
کے لیے ڈراپ اِن متبادل PIC12CE519-04/SM — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC12CE519-04/SM (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Program Memory Size, Package, Program Memory Type, Instruction Set, Core Architecture.
PIC12CE519-04E/SM
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC12CE519-04I/SM
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC12C508-04I/SM
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC12C509A-04I/SM
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC12CE519-04/SM زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Family | PIC12C 8-bit Microcontroller |
| Core Architecture | 8-bit PIC RISC (Harvard) |
| Program Memory Type | OTP (One-Time Programmable) |
| Program Memory Size | 1.5 KB (1K x 12 words) |
| Data RAM | 41 bytes |
| EEPROM Data Memory | 16 bytes (serial interface) |
| زیادہ سے زیادہ کلاک فریکوئنسی | 4 MHz |
| Instruction Cycle Time | 200 ns (at 4 MHz) |
| I/O Pins | 6 |
| I/O Source/Sink Current | 25 mA per pin |
| Supply Voltage Range | 2.5 V to 5.5 V |
| آپریٹنگ درجہ حرارت | 0 C to +70 C (Commercial) |
| Oscillator Options | Internal 4 MHz RC, External RC, Crystal, External Clock |
| پیکیج | 8-SOIJ (5.00 mm x 3.99 mm) |
| ماؤنٹنگ ٹائپ | Surface Mount |
| Instruction Set | 35 single-word instructions |
| RoHS اسٹیٹس | Compliant |
PIC12CE519-04/SM پن کنفیگریشن
| پن 1 | GP5/OSC1/CLKIN — Bidirectional I/O / oscillator input / external clock input |
| پن 2 | GP4/OSC2/CLKOUT — Bidirectional I/O / oscillator output / clock output (Fosc/4) |
| پن 3 | GP3/MCLR/VPP — Input-only I/O / Master Clear reset (active low) / programming voltage |
| پن 4 | GP2/T0CKI — Bidirectional I/O / Timer0 clock input |
| پن 5 | GP1 — Bidirectional I/O |
| پن 6 | GP0 — Bidirectional I/O |
| پن 7 | VSS — Ground reference |
| پن 8 | VDD — Positive supply voltage (2.5 V to 5.5 V) |
عام استعمالات
PIC12CE519-04/SM کے لیے موزوں ہے 6 ایپلیکیشنs: Low-Cost Remote Control, LED Lighting Controller, Battery Charger Controller, White Goods User Interface, Simple Sensor Interface, Consumer Appliance Timer.
Low-Cost Remote Control
The PIC12CE519-04/SM is an ideal MCU for infrared remote controls, where its 4 MHz RISC core, 25 mA I/O drive, and 16-byte EEPROM combine to deliver a complete single-chip solution. The 200 ns instruction cycle is fast enough to generate 38 kHz carrier-frequency IR modulation, while the 6 I/O pins provide enough headroom for IR LED drive, button matrix scanning, and status LED feedback. The 16-byte EEPROM stores device pairing codes and customer configuration flags persistently, so the remote remains functional across battery swaps. Power consumption in sleep mode is sub-1 microampere, supporting year-long battery life from two AAA cells operating over the part's 2.5 V to 5.5 V supply range.
تجویز کردہ
LED Lighting Controller
In LED lighting controllers the PIC12CE519-04/SM provides 25 mA per-pin I/O drive, sufficient to sink common-anode RGB or white LED strings directly without external MOSFETs in many configurations. The internal 4 MHz RC oscillator with programmable calibration provides deterministic PWM timing for dimming control, eliminating external crystal cost. The integrated 16-byte EEPROM stores last-set brightness and color-temperature preferences so user settings survive power cycles. The 1.5 KB OTP memory holds color-mixing algorithms and DMX-style address tables for architectural lighting. Commercial 0 C to +70 C operation covers indoor luminaires, while the PIC12CE519-04I/SM industrial variant extends coverage to outdoor fixtures.
تجویز کردہ
Battery Charger Controller
For low-power battery chargers targeting NiMH cells or small Li-ion packs, the PIC12CE519-04/SM delivers the right balance of I/O, EEPROM, and ADC-free analog control. The 6 I/O pins handle charge-enable MOSFET gate drive, status LED, temperature sensor input via comparator, and push-button user interface. The 16-byte EEPROM stores charge cycle count, last-full-charge timestamp, and battery chemistry parameters for adaptive charging algorithms. Operating from 2.5 V to 5.5 V, the part is directly compatible with single-cell Li-ion and 2-3 cell NiMH packs. The 35-instruction RISC core is straightforward to program in assembly or C, and the 1.5 KB OTP fits typical CC/CV charge profiles with room for safety timers.
تجویز کردہ
White Goods User Interface
In washing machines, dishwashers, and microwave ovens, the PIC12CE519-04/SM serves as a cost-optimized user-interface controller driving 7-segment displays, keypads, and buzzer feedback. The 25 mA per-pin drive directly multiplexes common-anode LED displays without driver transistors. The 16-byte EEPROM stores end-user preference settings (program selection, language, child-lock status) so settings survive power interruptions. With its 1.5 KB OTP holding the menu state machine and the 8-SOIJ package's small footprint, the device fits behind the front panel where PCB space is at a premium. Commercial 0 C to +70 C temperature range covers indoor appliance environments.
تجویز کردہ
Simple Sensor Interface
For sensor-hub applications reading a single analog or digital sensor and transmitting the result via UART or PWM, the PIC12CE519-04/SM offers a minimal-footprint 8-pin solution. The 6 I/O pins handle sensor power switching, analog threshold detection, and serial output. The internal 4 MHz oscillator provides stable timing for software UART baud-rate generation at 9600 bps. The 16-byte EEPROM stores calibration coefficients and sensor identification, allowing field replacement without host reconfiguration. Operating from 2.5 V to 5.5 V the part interfaces directly with 3.3 V sensors and 5 V transceivers. Industrial-temperature-grade PIC12CE519-04I/SM is the preferred variant for outdoor sensor nodes.
تجویز کردہ
Consumer Appliance Timer
In kitchen timers, fan controllers, and defrost-cycle modules, the PIC12CE519-04/SM provides the timing accuracy and I/O count needed in an 8-pin package. The internal calibrated 4 MHz RC oscillator supports time-base generation to within approximately +/-1 percent for short-duration timing, and the 16-byte EEPROM remembers last-used settings across power cycles. The 25 mA I/O drive directly switches small relays or TRIAC optocouplers for AC load control. With 6 I/O pins the MCU handles start/stop button input, status LED, buzzer, and one AC-load control output. The commercial temperature range of 0 C to +70 C suits indoor appliance use.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC12CE519-04/SM — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC12CE519-04E/SM | PIC12CE519-04I/SM | PIC12C508-04I/SM | PIC12C509A-04I/SM | PIC12F629-I/SN |
|---|---|---|---|---|---|---|
| Package | 8-SOIJ | 8-SOIJ - same | 8-SOIJ - same | 8-SOIJ - same | 8-SOIJ - same | 8-SOIC (different mechanical) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Memory | 1.5 KB OTP | 1.5 KB OTP | 1.5 KB OTP | 768 B OTP | 1.5 KB OTP | 1 KB Flash |
| EEPROM Data Memory | 16 bytes | 16 bytes | 16 bytes | None | None | 128 bytes |
| Maximum Clock | 4 MHz | 4 MHz | 4 MHz | 4 MHz | 4 MHz | 20 MHz |
| I/O Pins | 6 | 6 | 6 | 6 | 6 | 6 |
| Temperature Range | 0 C to +70 C (Commercial) | -40 C to +125 C (Extended) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) |
| Memory Type | OTP | OTP | OTP | OTP | OTP | Flash (reprogrammable) |
اہم امتیازی خصوصیات
- Integrated 16-byte serial EEPROM (بمقابلہPIC12C508-04I/SM)
- Commercial temperature grade at lowest price point (بمقابلہPIC12CE519-04I/SM)
- Compact 8-SOIJ package for tight PCB layouts (بمقابلہPIC12F629-I/SN)
ڈیزائن نوٹس
OTP memory can be programmed only once. Plan for ICSP (In-Circuit Serial Programming) access during development: dedicate the ICSPCLK (pin 12 equivalent on larger parts) and ICSPDAT pins and route them to a header, even if not used in production. Verify the MCLR pull-up resistor is correctly placed - if MCLR floats, the part may intermittently reset. Use a 10 kohm pull-up to VDD on MCLR pin (pin 3) per Microchip recommendation.
Add a 0.1 uF decoupling capacitor as close as possible to the VDD pin (pin 8), with a trace length under 5 mm to minimize inductance. For designs switching high-current loads via the I/O pins, add a bulk 10 uF tantalum or ceramic capacitor at the board power entry point. The internal 4 MHz RC oscillator draws additional supply current during start-up; if your design has a tight inrush budget, gate the MCU's VDD with a soft-start circuit.
The 8-SOIJ package has a center pad on the underside that is typically connected to VSS for thermal dissipation; solder this pad to a grounded copper pour to improve thermal performance and mechanical reliability. Keep high-speed traces (crystal, ICSP) short and away from switching noise sources. If using the external crystal oscillator mode, place the crystal within 5 mm of pins 1 and 2 with short symmetric traces and a grounded guard ring.
تعمیل کی معلومات
RoHS compliant per Microchip product page; not AEC-Q100 qualified (PIC12C5xx/CE5xx family is not automotive-qualified). Industrial and extended temperature variants available in the same package for harsher environments.
