PIC16C54-10E/P - 8-bit OTP MCU 10MHz 768B | Microchip Technology
MPN: PIC16C54-10E/P ✗ اختتامِ زندگیPIC16C54-10E/P جائزہ
What is an 8-bit OTP microcontroller? An 8-bit OTP microcontroller is a small, self-contained computer-on-a-chip that uses an 8-bit data path and stores its program in One-Time Programmable EPROM memory. OTP variants sit in the product hierarchy between masked-ROM devices (cheapest at high volume, but require NRE charges) and Flash devices (re-programmable in-circuit); they are widely used where low-to-medium volume production requires field programmability without the cost of a windowed UV-eraseable part.
Key features of the PIC16C54-10E/P include 33 single-word instructions (all single-cycle at 200 ns except program branches which take two cycles), a RISC architecture, a Power-On Reset (POR) circuit, a Watchdog Timer (WDT) for reliable operation, and an 8-bit timer/counter. The device operates from 3.0 V to 5.5 V and supports in-circuit serial programming (ICSP) via dedicated pins.
The PIC16C5X family uses a Harvard architecture with separate program and data buses, allowing instruction fetch and operand access to occur simultaneously. This RISC-style design gives deterministic 200 ns instruction execution at 10 MHz and produces highly compact code (2:1 compression versus typical 8-bit CISC controllers in the same class).
Typical applications include appliance controllers, automotive subsystems (body electronics, sensor interfaces), industrial controls, low-end remote keyless entry, security system panels, and any cost-sensitive embedded application that benefits from a proven, mature 8-bit core. The Extended temperature grade makes the PIC16C54-10E/P suitable for harsh-environment installations.
A key design consideration: OTP memory cannot be re-programmed, so code must be fully validated before committing. For prototyping or in-field firmware updates, consider the Flash-based PIC16F54 equivalent (same pinout, same peripherals) before committing the design to OTP. Brown-out detection is not present on this part; use external POR supervision if VDD rise time is slow.
This page synthesizes real-time distributor pricing, drop-in alternatives drawn from Microchip's own PIC16C5X family and Zilog's documented PIC16C54-to-Z86E02 upgrade path, plus practical design notes not collected in any single manufacturer datasheet.
کے لیے ڈراپ اِن متبادل PIC16C54-10E/P — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC16C54-10E/P (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Program Memory Type, Program Memory Size, Timers, Core Architecture.
PIC16C54-10/P
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16C54-10I/P
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F54-I/P
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16C54A-10E/P
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →Z86E02
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC16C54-10E/P زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Series | PIC® 16C |
| Core Processor | PIC |
| Core Size | 8-bit |
| زیادہ سے زیادہ کلاک فریکوئنسی | 10 MHz |
| Instruction Cycle Time | 200 ns |
| Program Memory Type | OTP (One-Time Programmable) EPROM |
| Program Memory Size | 768 B (512 × 12) |
| RAM Size | 25 B |
| Number of I/O Pins | 12 |
| Supply Voltage (VDD) | 3.0 V to 5.5 V |
| آپریٹنگ درجہ حرارت رینج | -40 °C to +125 °C (Extended, 'E' grade) |
| پیکیج | 18-pin PDIP (P) |
| ماؤنٹنگ ٹائپ | Through-Hole |
| Peripherals | POR (Power-On Reset), Watchdog Timer (WDT), 8-bit Timer/Counter |
| Instruction Set | 33 single-word instructions; all single-cycle except branches (2-cycle) |
| RoHS اسٹیٹس | Non-compliant (contains lead; through-hole PDIP) |
PIC16C54-10E/P پن کنفیگریشن
| پن 1 | RA2 — Bidirectional I/O port A bit 2 |
| پن 2 | RA3 — Bidirectional I/O port A bit 3 |
| پن 3 | RTCC — Real-Time Clock/Counter external input (also T0CKI) |
| پن 4 | MCLR — Master Clear reset input (active low) / VPP programming voltage |
| پن 5 | VSS — Ground reference |
| پن 6 | RB0 — Bidirectional I/O port B bit 0 |
| پن 7 | RB1 — Bidirectional I/O port B bit 1 |
| پن 8 | RB2 — Bidirectional I/O port B bit 2 |
| پن 9 | RB3 — Bidirectional I/O port B bit 3 |
| پن 10 | RB4 — Bidirectional I/O port B bit 4 |
| پن 11 | RB5 — Bidirectional I/O port B bit 5 |
| پن 12 | RB6 — Bidirectional I/O port B bit 6 |
| پن 13 | RB7 — Bidirectional I/O port B bit 7 |
| پن 14 | VDD — Positive supply voltage (3.0 V to 5.5 V) |
| پن 15 | OSC2 — Oscillator output / external clock return |
| پن 16 | OSC1 — Oscillator input / external clock input |
| پن 17 | RA0 — Bidirectional I/O port A bit 0 |
| پن 18 | RA1 — Bidirectional I/O port A bit 1 |
عام استعمالات
PIC16C54-10E/P کے لیے موزوں ہے 6 ایپلیکیشنs: Appliance Control Boards, Automotive Body Electronics, Industrial Sensor Interfaces, Remote Keyless Entry (RKE) and Security Panels, Low-End Consumer Remote Controls, Educational and Hobbyist Embedded Projects.
Appliance Control Boards
The PIC16C54-10E/P's 10 MHz core, 12 I/O pins, and Watchdog Timer make it well-suited to washing-machine, dishwasher, microwave and HVAC controller boards. The Extended -40 °C to +125 °C temperature grade handles under-cabinet or motor-compartment thermal stress. The 33 single-word RISC instructions fit small C or assembly state machines for relay, valve, and triac-drive sequencing. Estimated: at VDD=5 V and 4 MHz active, current draw is approximately 2 mA, suitable for always-on appliance electronics. Compared with masked-ROM equivalents, OTP allows late-stage firmware changes during model-year transitions without re-masking charges.
تجویز کردہ
Automotive Body Electronics
Body-electronics modules such as seat controllers, mirror adjusters, lighting dimmers and simple sensor interfaces benefit from the PIC16C54-10E/P's Extended temperature grade and 12-bit instruction compression. The 200 ns instruction cycle is fast enough for 10 ms-class CAN-style bit timing or LIN slave bit-banging at 19.2 kbps. Brown-out handling relies on the internal Power-On Reset circuit; pair with an external MCP130 supervisor for crank-voltage transients. OTP memory prevents accidental in-field reprogramming by unauthorized tools - an advantage for safety-relevant nodes. Estimated quiescent current below 1 µA in sleep mode keeps battery drain acceptable for parked vehicles.
تجویز کردہ
Industrial Sensor Interfaces
Low-speed industrial sensor conditioning nodes - thermocouple cold-junction compensators, 4-20 mA loop read-backs, photo-eye interfaces - use the PIC16C54-10E/P as a low-cost ADC-replacement signal processor. The 8-bit timer/counter generates PWM excitation for resistive-bridge sensors at kHz-class frequencies. 12 I/O pins accommodate 4-6 sensor channels plus indicator LEDs and a UART link. The RISC architecture keeps interrupt latency deterministic at 200 ns. Pair with an MCP602 op-amp for signal conditioning and a TLP181 optocoupler for loop isolation. Estimated ADC throughput of 8 ksamples/s using successive-approximation techniques is achievable in firmware.
تجویز کردہ
Remote Keyless Entry (RKE) and Security Panels
Low-cost RKE fobs, garage-door keypads, and PIR-triggered alarm panels fit easily in 768 bytes of PIC16C54-10E/P OTP. The 10 MHz core performs rolling-code encryption or simple fixed-code transmit sequencing within microsecond budgets. The Watchdog Timer recovers from RF-induced firmware lockups. Sleep current well under 1 µA on coin-cell batteries gives multi-year standby. The Extended temperature rating tolerates glove-compartment or outdoor-cabinet extremes. Use a 433 MHz SAW-resonator transmitter (e.g., MICRF102) or an ASK/OOK module for the RF link. Estimated battery life exceeds 5 years at <0.1 % duty cycle.
تجویز کردہ
Low-End Consumer Remote Controls
TV, set-top-box, fan and lighting remote controls are a natural fit for the PIC16C54-10E/P. The 12 I/O pins scan a 4×4 or 5×3 keypad matrix with zero external components, while the 8-bit timer/counter generates IR carrier at 38 kHz or 56 kHz. The Extended temperature grade prevents summer-window sill failures. OTP eliminates accidental user erasure in the field. Typical 2 mA active current at 4 MHz yields >1 year battery life from a pair of AA cells. Pair with a TSOP38238 IR receiver for the receiver side. Estimated code density allows 50-80 button commands in 768 B.
تجویز کردہ
Educational and Hobbyist Embedded Projects
The PIC16C54-10E/P remains a teaching staple because of its 33-instruction RISC core that fits on a single page of a textbook and its deterministic timing that beginners can reason about. Through-hole PDIP is breadboard-friendly for schools and makerspaces. Although the Extended temperature grade and OTP memory are over-spec for classroom use, the price differential is small. For learner projects that need reprogramming, drop in the PIC16F54-I/P - same 18-pin PDIP footprint. Pair with the PICkit 3 / PICkit 4 programmer and MPLAB X IDE for the development flow. Estimated learning curve: blink an LED in 6 instructions.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC16C54-10E/P — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC16C54-10/P | PIC16C54-10I/P | PIC16F54-I/P | PIC16C54A-10E/P | Z86E02 |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Zilog |
| Package | 18-PDIP (P) - through-hole | 18-PDIP (P) - through-hole | 18-PDIP (P) - through-hole | 18-PDIP (P) - through-hole | 18-PDIP (P) - through-hole | 18-PDIP - through-hole |
| Program Memory Type | OTP EPROM (768 B / 512 × 12) | OTP EPROM (768 B) | OTP EPROM (768 B) | Flash (768 B) | OTP EPROM (768 B) | EPROM windowed (1 KB) |
| Maximum Clock Frequency | 10 MHz | 10 MHz | 10 MHz | 10 MHz | 10 MHz | 12 MHz |
| Operating Temperature Range | -40 °C to +125 °C (Extended, 'E') | 0 °C to +70 °C (commercial) | -40 °C to +85 °C (industrial) | -40 °C to +85 °C (industrial) | -40 °C to +125 °C (Extended) | 0 °C to +70 °C (commercial) |
| RAM Size | 25 B | 25 B | 25 B | 25 B | 25 B | 61 B |
| Number of I/O Pins | 12 | 12 | 12 | 12 | 12 | 14 |
| RoHS Status | Non-compliant (leaded PDIP) | Non-compliant (leaded PDIP) | Non-compliant (leaded PDIP) | Non-compliant (leaded PDIP) | Non-compliant (leaded PDIP) | Non-compliant (leaded PDIP) |
| Lifecycle Status | NRND | NRND | NRND | Active (recommended for new designs) | NRND | Obsolete |
اہم امتیازی خصوصیات
- Extended temperature grade (-40 °C to +125 °C) in a through-hole 18-PDIP package (بمقابلہPIC16C54-10/P)
- Flash memory enables iterative firmware development (بمقابلہPIC16F54-I/P)
- Zilog second-source with documented pin-compatibility upgrade path (بمقابلہZ86E02)
ڈیزائن نوٹس
The PIC16C54-10E/P operates from 3.0 V to 5.5 V. At 10 MHz active current is approximately 2.5 mA at 5 V (estimated from PIC16C5X family typicals), dropping to <1 µA in sleep. Decouple VDD with a 100 nF ceramic capacitor placed within 5 mm of pin 14, plus a bulk 10 µF tantalum at the regulator output. The internal Power-On Reset (POR) handles VDD rise times up to ~50 ms; for slower ramps, supervise VDD externally with an MCP130 or equivalent to avoid code execution from invalid memory states.
Keep the 18-PDIP footprint on a 0.100-inch (2.54 mm) row pitch with 0.300-inch row-to-row span to match standard IC sockets and breadboards. Place the decoupling capacitor within 5 mm of VDD (pin 14) and the crystal/ceramic resonator within 5 mm of OSC1/OSC2 (pins 16/15). Route the MCLR/VPP line (pin 4) directly to the ICSP header with no series resistance above 10 kΩ to ensure reliable in-circuit programming. Keep high-current switching traces (relay coils, triacs) away from the oscillator pins to avoid EMI-induced clock jitter.
Critical pitfalls: (1) Brown-out detection is NOT present - use external voltage supervision if VDD can droop below 3 V under load. (2) OTP memory cannot be re-programmed - validate firmware with a Flash-based PIC16F54-I/P before committing to OTP production. (3) The '/P' suffix denotes through-hole PDIP which is NOT RoHS compliant; use '/SO' or '/SS' for lead-free products. (4) Branch instructions take 2 cycles (400 ns) - account for this when computing tight timing loops such as UART bit-banging or IR carrier generation.
تعمیل کی معلومات
18-pin PDIP through-hole package contains lead and is not RoHS compliant. For RoHS-compliant designs, choose the surface-mount PIC16C54-10E/SO or PIC16C54-10E/SS variant. AEC-Q100 qualification is not stated on the Microchip product page - contact Microchip for automotive PPAP documentation if required.