PIC16CE623-04I/P - 4MHz 8-Bit OTP MCU, 18-PDIP | Microchip
MPN: PIC16CE623-04I/P ✓ فعالPIC16CE623-04I/P جائزہ
A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, working RAM, EEPROM/Flash data memory, and programmable I/O peripherals. Within the broader semiconductor taxonomy, an MCU belongs to the microcontrollers category, then to integrated circuits, then to semiconductors. The "C" suffix in PIC16CE623 indicates the EPROM/OTP program-memory process node used in mid-1990s PIC designs; the "E" designates on-chip EEPROM data memory; the "623" indicates a specific peripheral mix (capture/compare/PWM, comparator, voltage reference) within the PIC16C6xx family.
Key features include a 35-instruction RISC architecture with 200 ns single-cycle execution (except 2-cycle branches), 96 bytes of RAM, 13 digital I/O pins, an internal 4 MHz RC oscillator option plus external crystal support, and a 3.0 V to 5.5 V single-supply operating range. The device draws typically < 2 mA active at 5 V / 4 MHz and supports a power-saving SLEEP mode. Brown-out reset (BOR), watchdog timer (WDT), and an 8-bit timer/counter with prescaler provide robust embedded control.
Technically, the PIC16CE623-04I/P uses a 14-bit instruction word Harvard architecture with separate code and data buses, allowing simultaneous instruction fetch and data access. The integrated EEPROM (16 bytes typical) provides non-volatile storage for user data without external components. The "04" speed suffix specifies 4 MHz maximum oscillator frequency, and the "I" industrial temperature grade extends operation from -40 C to +85 C.
Typical applications include low-cost consumer appliances, IR remote controls, sensor interface boards, battery-powered instrumentation, small motor control, and legacy industrial controllers. Designers choose this part when a simple 8-bit controller with non-volatile parameter storage is needed at minimum BOM cost.
When designing with this device, reserve the OTP window: because program memory is one-time-programmable, firmware must be fully validated in-circuit-emulation or windowed-EPROM equivalents (PIC16CR623) before committing to production OTP parts. For new designs, Microchip recommends the pin-compatible PIC16F627A-I/P Flash-based successor.
This page synthesizes distributor pricing, package-pinned drop-in alternatives, and practical design guidance not consolidated in the manufacturer datasheet.
کے لیے ڈراپ اِن متبادل PIC16CE623-04I/P — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC16CE623-04I/P (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Operating Temperature, Program Memory Size, Program Memory Type, Core Architecture.
PIC16CE625-04I/P
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC16CE624-04I/P
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F627A-I/P
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16C622A-04I/P
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16C558-04I/P
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ATMEGA8A-PU
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16CE623-04I/P زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Family | PIC16C |
| Core | 8-bit PIC RISC |
| Program Memory Type | OTP (EPROM-based) |
| Program Memory Size | 896 B (512 x 14 words) |
| Data EEPROM | 16 bytes (integrated) |
| RAM Size | 96 bytes |
| زیادہ سے زیادہ کلاک فریکوئنسی | 4 MHz |
| Instruction Cycle Time | 200 ns (single-cycle), 400 ns (branch) |
| سپلائی وولٹیج | 3.0 V to 5.5 V |
| I/O Pins | 13 |
| Timers | 1 x 8-bit with prescaler |
| آپریٹنگ درجہ حرارت | -40 C to +85 C (industrial, "I" grade) |
| پیکیج | 18-pin PDIP (0.300 inch, 7.62 mm) |
| ماؤنٹنگ ٹائپ | Through-Hole |
| MSL لیول | 1 (unlimited floor life) |
| RoHS اسٹیٹس | Compliant |
PIC16CE623-04I/P پن کنفیگریشن
| پن 1 | RA2 — Port A bit 2 (digital I/O) |
| پن 2 | RA3 — Port A bit 3 (digital I/O / MCLR input) |
| پن 3 | RA4 — Port A bit 4 (digital I/O / T0CKI) |
| پن 4 | RA5 — Port A bit 5 (digital I/O / SS-bar) |
| پن 5 | VSS — Ground reference |
| پن 6 | RB0 — Port B bit 0 (digital I/O / INT) |
| پن 7 | RB1 — Port B bit 1 (digital I/O) |
| پن 8 | RB2 — Port B bit 2 (digital I/O) |
| پن 9 | RB3 — Port B bit 3 (digital I/O / PGM) |
| پن 10 | RB4 — Port B bit 4 (digital I/O) |
| پن 11 | RB5 — Port B bit 5 (digital I/O) |
| پن 12 | RB6 — Port B bit 6 (digital I/O / PGC) |
| پن 13 | RB7 — Port B bit 7 (digital I/O / PGD) |
| پن 14 | VDD — Positive supply (3.0-5.5 V) |
| پن 15 | OSC2 — Oscillator output / CLKOUT |
| پن 16 | OSC1 — Oscillator input / CLKIN |
| پن 17 | RA0 — Port A bit 0 (digital I/O) |
| پن 18 | RA1 — Port A bit 1 (digital I/O) |
عام استعمالات
PIC16CE623-04I/P کے لیے موزوں ہے 6 ایپلیکیشنs: Consumer Appliance Controllers, IR Remote Control Transmitters, Sensor Interface Boards, Battery-Powered Instrumentation, Small Motor / Solenoid Drivers, Legacy Industrial Controller Replacements.
Consumer Appliance Controllers
The PIC16CE623-04I/P is well-suited for consumer appliance control boards (rice cookers, fans, small kitchen devices) thanks to its 4 MHz 8-bit core, 96 bytes RAM, and 13 digital I/O pins. The 16-byte integrated EEPROM allows persistent storage of user settings such as timer presets, mode selections, and calibration offsets across power cycles. Operating from a single 3.0-5.5 V supply and drawing under 2 mA active, it fits battery and mains-derived 5 V rails equally well. Compared with discrete logic controllers, the PIC16CE623-04I/P integrates brown-out reset and watchdog timer, eliminating external supervisor ICs.
تجویز کردہ
IR Remote Control Transmitters
For IR remote controls, the PIC16CE623-04I/P offers the right balance of cost and capability: low active current under 2 mA at 4 MHz, 13 I/O for key matrix scanning and IR LED drive, plus integrated SLEEP mode for battery life extension. The 200 ns instruction cycle supports standard RC5 / NEC IR protocol timing without timer overflows. The 16-byte EEPROM stores device pairing codes and customer-specific IDs. Same-package siblings like the PIC16CE624-04I/P add more memory for richer protocol libraries at the same 18-PDIP footprint.
تجویز کردہ
Sensor Interface Boards
Sensor interface front-ends leverage the PIC16CE623-04I/P's analog comparators and programmable voltage reference to threshold-detect thermocouple, thermistor, or hall-sensor signals without external op-amps. The 13 I/O pins handle multi-channel sensor scanning via software multiplexing, and the 4 MHz clock provides 5 us ADC-equivalent timing resolution when paired with external delta-sigma converters. EEPROM stores calibration constants unique to each board. Designers value the industrial -40 C to +85 C temperature grade for HVAC and outdoor sensor nodes.
تجویز کردہ
Battery-Powered Instrumentation
Battery-powered instrumentation such as handheld multimeters, portable data loggers, and field meters benefits from the PIC16CE623-04I/P's < 2 mA active current at 4 MHz and sub-microamp SLEEP mode. Brown-out reset protects against low-battery corrupt writes to the 16-byte EEPROM. The wide 3.0-5.5 V supply range accepts both single-cell Li-ion (with boost) and 2xAA alkaline packs. The 8-bit PIC RISC core executes a typical sensor read-and-store loop in well under 1 ms, maximizing sleep duty cycle.
تجویز کردہ
Small Motor / Solenoid Drivers
Small DC motor and solenoid drive boards use the PIC16CE623-04I/P for closed-loop PWM control via the 8-bit timer/counter with prescaler, plus GPIO for H-bridge enable and direction control. At 4 MHz and 200 ns instruction cycle, the part generates standard 1-25 kHz PWM frequencies with fine duty resolution. The integrated watchdog timer and brown-out reset ensure safe motor braking on fault conditions. The 18-PDIP package is well suited to through-hole drive boards common in industrial relay modules.
تجویز کردہ
Legacy Industrial Controller Replacements
Long-life industrial controllers such as programmable logic relay boards, simple vending machine sub-controllers, and HVAC damper actuators still specify the PIC16CE623-04I/P because of its proven 25+ year operating heritage and stable OTP code-image supply. Microchip's mature PIC16C family lifecycle keeps the part active with no EOL notice, and the industrial -40 C to +85 C grade supports factory-floor environments. The 18-PDIP package supports hand-repair and socketed field replacement. Engineers specifying new designs should evaluate the Flash-based PIC16F627A-I/P as the modern drop-in replacement.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC16CE623-04I/P — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC16CE625-04I/P | PIC16CE624-04I/P | PIC16F627A-I/P | PIC16C622A-04I/P | PIC16C558-04I/P | ATMEGA8A-PU |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 18-PDIP (0.300 in) | 18-PDIP - same | 18-PDIP - same | 18-PDIP - same | 18-PDIP - same | 18-PDIP - same | 28-PDIP (not 18-pin compatible, partial) |
| Program Memory | 896 B OTP | 2048 B OTP | 1792 B OTP | 1024 B Flash | 1280 B OTP | 768 B OTP | 8 KB Flash |
| RAM | 96 B | 128 B | 128 B | 224 B | 128 B | 128 B | 1 KB |
| EEPROM | 16 B | 16 B | 16 B | 128 B | 16 B | 16 B | 512 B |
| Max Clock | 4 MHz | 4 MHz | 4 MHz | 20 MHz (ext) / 4 MHz int | 4 MHz | 4 MHz | 16 MHz |
| Program Memory Type | OTP (EPROM) | OTP (EPROM) | OTP (EPROM) | Flash (re-programmable) | OTP (EPROM) | OTP (EPROM) | Flash (re-programmable) |
| I/O Pins | 13 | 13 | 13 | 16 | 13 | 13 | 23 (28-pin) |
| Supply Voltage | 3.0-5.5 V | 3.0-5.5 V | 3.0-5.5 V | 2.0-5.5 V | 3.0-5.5 V | 3.0-5.5 V | 2.7-5.5 V |
اہم امتیازی خصوصیات
- Integrated EEPROM data memory on-chip (بمقابلہPIC16C558-04I/P)
- Pin-compatible Flash migration path (بمقابلہPIC16F627A-I/P)
- Mature 25-year PIC16C legacy with stable supply (بمقابلہATMEGA8A-PU (cross-brand AVR))
ڈیزائن نوٹس
OTP program memory cannot be erased once written - the PIC16CE623-04I/P code image is permanently fixed at production time. Validate firmware on a windowed-EPROM equivalent (PIC16CR623) or in-circuit emulator (ICE2000) before committing to OTP parts. Per Microchip datasheet 30235d, OTP programming must use the high-voltage ICSP protocol on RB6/RB7 with MCLR raised to VPP. Verify the programmer target voltage matches (typically 13.0-13.5 V) before connecting to production parts.
Add a 0.1 uF decoupling capacitor between VDD (pin 14) and VSS (pin 5) within 5 mm of the package, plus a 10 uF bulk capacitor at the board supply entry. The PIC16CE623-04I/P draws < 2 mA active at 4 MHz but the supply transient during EEPROM write can reach 25 mA peak. Brown-out reset (BOR) is enabled by configuration bit and should remain enabled for battery-powered designs - datasheet figure shows BOR trip around 2.7-3.0 V typical.
OSC1 (pin 16) and OSC2 (pin 15) traces should be kept short and surrounded by a ground pour for stable oscillation. For crystal operation, place the load capacitors (typically 15-33 pF) within 2 mm of the oscillator pins. If using the internal 4 MHz RC oscillator, leave OSC1 floating or tie to VDD through a resistor to avoid stray pickup. For 18-PDIP through-hole layouts, reserve a 0.300 inch row spacing to accept the standard IC socket.
Pin 3 (RA4/T0CKI) on the PIC16CE623-04I/P is an open-drain output and requires an external pull-up if used as a digital output. Pin 2 (RA3/MCLR-bar) is the master-clear reset input and must be pulled high through a 10 kohm resistor; do not leave it floating - the datasheet specifies MCLR-bar must not be left open for reliable operation. RB0 (pin 6) doubles as the external interrupt input (INT) and supports edge-triggered wake from SLEEP mode.
تعمیل کی معلومات
RoHS and REACH compliant per Microchip product page. Industrial temperature grade (-40 C to +85 C). Not AEC-Q100 qualified - automotive applications should use PIC16F627A-I/P with AEC-Q100 documentation or a Q-graded alternative.
