PIC16F1507T-I/GZ - 8-bit MCU 3.5KB Flash 12 I/O | Microchip
MPN: PIC16F1507T-I/GZ ✓ فعالPIC16F1507T-I/GZ جائزہ
An 8-bit microcontroller (MCU) is a small computer-on-a-chip that combines a CPU, non-volatile program memory, RAM, and peripherals on a single die. The PIC16F1507 belongs to the broader PIC16 family -> 8-bit microcontroller category -> microcontroller -> embedded processor hierarchy. Compared with 32-bit ARM Cortex parts, 8-bit MCUs trade raw throughput for deterministic latency, low cost, and ultra-low sleep current, which is why they continue to dominate simple sensing, lighting, and human-interface designs.
Key features include an internal 16 MHz high-precision oscillator that eliminates an external crystal in most applications, two Configurable Logic Cells (CLC) for hardware-state-machine glue logic, a Numerically Controlled Oscillator (NCO) for fine-frequency digital synthesis, and a Complementary Waveform Generator (CWG) for motor/lighting half-bridge drive. An integrated Temperature Indicator module provides on-die thermal monitoring without an external sensor, and the 25 mA I/O source/sink rating enables direct LED drive.
Architecturally, the Enhanced Mid-range core adds hardware-limited arithmetic, a wider instruction set, and tighter interrupt latency versus baseline PIC12/PIC16. Self-read/write Flash allows in-application firmware updates and EEPROM-style data logging without an external memory IC.
Typical applications include consumer white goods, LED lighting controllers, battery chargers, small appliance user interfaces, and low-cost sensor nodes where the ADC, NCO, and CLC peripherals replace discrete analog components.
When designing with this part, reserve the UQFN-20 exposed pad as the primary thermal path and stitch it to a ground copper pour of at least 1 cm square; configure the configuration words (CONFIG1/CONFIG2) for the internal 16 MHz HFINTOSC during prototyping, then validate with the calibrated LFINTOSC for sleep-mode current budgets.
This page synthesizes distributor pricing, drop-in alternatives drawn from the same PIC16 family, and practical design notes that go beyond the manufacturer datasheet.
کے لیے ڈراپ اِن متبادل PIC16F1507T-I/GZ — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC16F1507T-I/GZ (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Core Architecture, Package, Program Memory (Flash), ADC, I/O Pins.
PIC16F1509-I/GZ
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F1507-I/GZ
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F1507-E/GZ
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F1507T-I/GZ زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core Architecture | Enhanced Mid-range 8-bit PIC core |
| Instruction Set Size | 49 instructions |
| Program Memory (Flash) | 3.5 KB |
| Data EEPROM | 128 B (non-volatile) |
| RAM | 128 B |
| I/O Pins | 12 |
| ADC | 12-channel, 10-bit |
| Internal Oscillator | 16 MHz HFINTOSC |
| Maximum Operating Frequency | 20 MHz (200 ns instruction cycle) |
| I/O Source/Sink Current | 25 mA per pin |
| PWM Modules | 4x standalone PWM |
| Configurable Logic Cells (CLC) | 2 |
| Numerically Controlled Oscillator (NCO) | 1 |
| Complementary Waveform Generator (CWG) | 1 |
| Temperature Indicator | Integrated (on-die) |
| آپریٹنگ درجہ حرارت رینج | -40C to +85C (Industrial, "I" grade) |
| پیکیج | 20-pin UQFN (GZ) 4x4 mm |
| ماؤنٹنگ ٹائپ | Surface Mount |
| RoHS اسٹیٹس | Compliant |
PIC16F1507T-I/GZ پن کنفیگریشن
| پن 1 | RA5 — Bidirectional I/O / ADC channel / digital-only port bit |
| پن 2 | RA4 — Bidirectional I/O / ADC channel |
| پن 3 | RA3 — Bidirectional I/O / MCLR input (input only) |
| پن 4 | RA2 — Bidirectional I/O / ADC channel |
| پن 5 | RA1 — Bidirectional I/O / ADC channel / ICSPCLK |
| پن 6 | RA0 — Bidirectional I/O / ADC channel / ICSPDAT |
| پن 7 | VSS — Ground reference |
| پن 8 | RA7 — Bidirectional I/O / ADC channel / digital-only port bit |
| پن 9 | RA6 — Bidirectional I/O / ADC channel / digital-only port bit |
| پن 10 | RC0 — Bidirectional I/O / ADC channel |
| پن 11 | RC1 — Bidirectional I/O / ADC channel |
| پن 12 | RC2 — Bidirectional I/O / ADC channel |
| پن 13 | RC3 — Bidirectional I/O / ADC channel |
| پن 14 | RC4 — Bidirectional I/O / ADC channel |
| پن 15 | RC5 — Bidirectional I/O / ADC channel |
| پن 16 | VDD — Positive supply (2.3V to 5.5V) |
| پن 17 | VSS — Ground (second pad) |
| پن 18 | RB4 — Bidirectional I/O / ADC channel |
| پن 19 | RB5 — Bidirectional I/O / ADC channel |
| پن 20 | RB6 — Bidirectional I/O / ADC channel |
عام استعمالات
PIC16F1507T-I/GZ کے لیے موزوں ہے 7 ایپلیکیشنs: LED Lighting Controller, Battery Charger Controller, Small Appliance User Interface, Sensor Node / IoT Edge Device, Hobby / Maker Development Boards, Industrial Control Logic, Fan / Motor Speed Controller.
LED Lighting Controller
The PIC16F1507T-I/GZ fits LED lighting controllers because its 4 standalone PWM channels, 25 mA I/O source/sink rating, and Complementary Waveform Generator (CWG) can directly drive MOSFET half-bridges for dimmable white or RGBW LED strings. The internal 16 MHz HFINTOSC provides jitter-free PWM frequency without an external crystal, while the 12-channel 10-bit ADC reads ambient-light sensors and potentiometer dim inputs. Compared with discrete 555-timer designs, the 1507 removes the oscillator RC tuning, integrates thermal fold-back via the on-die Temperature Indicator, and shrinks the BOM to one IC.
تجویز کردہ
Battery Charger Controller
The PIC16F1507T-I/GZ fits cost-sensitive Li-ion / NiMH charger designs where the 10-bit ADC monitors battery voltage and current, the NCO generates precise PWM for synchronous-rectifier control, and the CLC blocks implement hardware-level charge-state logic without burning CPU cycles. Flash self-read/write lets the charger store custom charge profiles, while the 128 B EEPROM retains cycle-count and fault logs across power cycles. The industrial -40C to +85C grade covers consumer and light-industrial chargers and matches typical charge-temperature windows.
تجویز کردہ
Small Appliance User Interface
The PIC16F1507T-I/GZ fits small-appliance HMIs - coffee makers, blenders, toaster ovens - because its 25 mA I/O drives LED indicators and 7-segment displays directly, the 12-channel ADC reads keypad matrices and thermistor inputs, and the integrated Temperature Indicator enables overtemperature shutdown without a separate sensor. The Enhanced Mid-range core's deterministic interrupt latency keeps capacitive-touch button response below 50 ms. Combined with a 3.5 KB Flash budget, this device replaces legacy PIC16F505 designs with much richer firmware in the same UQFN-20 footprint.
تجویز کردہ
Sensor Node / IoT Edge Device
The PIC16F1507T-I/GZ fits simple IoT edge nodes where cost and sleep current dominate. Its 8-bit core, integrated ADC, and small Flash footprint let a battery-powered sensor sleep for months between readings, while the PIC16F1507T-I/GZ's PIC16 instruction set keeps firmware small and deterministic. Two CLC blocks implement hardware event filtering (e.g., wake-on-pulse) without CPU involvement, dramatically reducing average current. For wireless connectivity, an external sub-GHz or BLE module such as the MRF24J40 family can be SPI-attached.
تجویز کردہ
Hobby / Maker Development Boards
The PIC16F1507T-I/GZ fits low-cost educational and hobby development boards such as Microchip's Curiosity platform because the UQFN-20 (GZ) package has the small footprint needed for compact demo boards while exposing 12 I/O for breadboard-friendly pin headers. Its internal 16 MHz oscillator, MPLAB X IDE support, and rich peripheral set make it a strong teaching example for ADC, PWM, and CLC concepts. The 3.5 KB Flash is large enough for sample code demonstrating interrupt-driven designs but small enough to be fully understood by students.
تجویز کردہ
Industrial Control Logic
The PIC16F1507T-I/GZ fits industrial control logic blocks - relay drivers, solenoid multiplexers, valve controllers - where its 25 mA I/O directly drives optocouplers and low-side FETs, and its 12-channel ADC reads 4-20 mA loops through external shunts. The CWG module generates complementary PWMs for H-bridge motor direction control on small DC pumps or fans, and the industrial -40C to +85C grade handles factory-floor environments. Microchip's MPLAB X ecosystem and XC8 compiler enable IEC 61508 functional-safety paths for low-risk subsystems.
تجویز کردہ
Fan / Motor Speed Controller
The PIC16F1507T-I/GZ fits small DC fan and motor speed controllers because the Complementary Waveform Generator (CWG) outputs dead-band-controlled complementary PWMs ideal for driving N-channel/P-channel MOSFET half-bridges. The 10-bit ADC reads back-EMF or tachometer pulses for closed-loop RPM control, and the NCO can synthesize a fine-frequency dither signal to spread EMI. Compared with a discrete 555 + op-amp design, the 1507 reduces part count, adds programmable acceleration/deceleration curves, and stores last-set RPM in EEPROM.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC16F1507T-I/GZ — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC16F1509-I/GZ | PIC16F1507-I/GZ | PIC16F1507-E/GZ | PIC16F1503-I/SO | PIC16F1455-I/SL |
|---|---|---|---|---|---|---|
| Package | UQFN-20 (GZ) | UQFN-20 (GZ) - same | UQFN-20 (GZ) - same | UQFN-20 (GZ) - same | SOIC-14 - different footprint | SOIC-14 - different footprint |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Memory (Flash) | 3.5 KB | 7 KB | 3.5 KB | 3.5 KB | 2 KB | 8 KB |
| I/O Pins | 12 | 19 | 12 | 12 | 8 | 11 |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +125C (Extended) | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
| ADC | 12-channel, 10-bit | 12-channel, 10-bit | 12-channel, 10-bit | 12-channel, 10-bit | 8-channel, 10-bit | 8-channel, 10-bit |
| PWM Channels | 4 | 4 | 4 | 4 | 2 | 2 |
| CLC / NCO / CWG | 2 / 1 / 1 | 2 / 1 / 1 | 2 / 1 / 1 | 2 / 1 / 1 | 0 / 0 / 0 | 0 / 0 / 0 |
اہم امتیازی خصوصیات
- Integrated CLC / NCO / CWG peripherals on 8-bit PIC16 (بمقابلہPIC16F1503-I/SO)
- On-die Temperature Indicator without external sensor (بمقابلہPIC16F1455-I/SL)
- Higher I/O source/sink current rating (بمقابلہPIC16F1509-I/GZ)
- Drop-in upgrade path within same UQFN-20 footprint (بمقابلہPIC16F1509-I/GZ)
ڈیزائن نوٹس
Estimated: at 20 MHz instruction rate and typical 8 mA active I_DD for the PIC16F1507, the UQFN-20's thermal pad must be soldered to a ground copper pour of at least 1 cm squared to keep theta_JA low. UQFN packages rely almost entirely on the exposed pad for heat removal - if the pad is left floating, junction temperature can rise 20-30 C above ambient at full CPU load, reducing long-term reliability. Stitch vias through the pad to the inner ground plane for best thermal performance.
Place a 100 nF decoupling capacitor as close as possible to the VDD pin (pin 16) with the ground return via placed within 2 mm. For designs with high-current I/O switching (e.g., 25 mA LED drive), add a 10 uF bulk capacitor near VDD to suppress switching transients. The UQFN-20 land pattern requires NSMD (non-solder-mask-defined) pads for reliable paste release during assembly - review the Microchip UQFN-20 land-pattern application note before finalizing the PCB footprint.
Route the MCLR pin (RA3) away from high-current switching traces to avoid spurious resets. If RA3 is not used as MCLR, configure it as an input-only GPIO. Use Microchip's recommended 100 nF capacitor on MCLR for ICSP programming reliability. Avoid placing the 32.768 kHz crystal traces (if used) parallel to switching I/O traces to prevent coupling. Place the ICSP header on the board edge or under-bump to enable in-circuit programming during prototyping.
Do not exceed the absolute maximum VDD of 5.5V; use the MCP1700 LDO or similar for USB/5V-supplied designs. Configuration words (CONFIG1, CONFIG2) must be explicitly set in source code - leaving them at default may disable the MCLR pin or select the wrong oscillator. The 12-channel ADC requires both ADCON0 and ADCON1 to be initialized before use; forgetting to set the channel-select bits is a common first-time-programming bug. Watch for read-modify-write hazards on PORTA when bit-banging.
Sleep current on the PIC16F1507T-I/GZ with the 16 MHz HFINTOSC disabled is in the low-microamp range (per Microchip datasheet DS40001586D), enabling years of battery life on a 3 V coin cell for sensor nodes. Use the CLC + NCO + CWG peripherals to wake the CPU only on edge events so the core spends most of its time in sleep. Avoid leaving floating analog inputs - they draw bias current and can corrupt ADC readings. Set unused I/O pins as outputs low to minimize supply current.
تعمیل کی معلومات
RoHS and REACH compliant per Microchip product page declaration. Industrial -40C to +85C grade; not AEC-Q100 automotive qualified. Lead-free UQFN-20 (GZ) package, halogen-free per Microchip environmental compliance file.
