PIC16F1516-I/MV - 14KB Flash 8-bit MCU, 28-UQFN | Microchip
MPN: PIC16F1516-I/MV ✓ فعالPIC16F1516-I/MV جائزہ
An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and a rich peripheral set around a compact Harvard or von-Neumann core. PIC microcontrollers implement a Harvard RISC architecture and sit within the larger taxonomy: microcontroller -> embedded controller -> semiconductor IC. They are widely used where deterministic timing, low power, and small footprint matter more than raw compute throughput - exactly the niche the PIC16F1516 targets with nanoWatt XLP technology.
Key features include a 49-instruction enhanced mid-range core with 16-level stack, two Capture/Compare/PWM (CCP) modules, one enhanced 16-bit timer (TMR1), two 8-bit timers (TMR0/TMR2), an extended watchdog timer (WDT), I2C/SPI/EUSART with auto-baud, programmable ultra-low-power brown-out reset (ULPBOR), in-circuit serial programming (ICSP), and in-circuit debug. The device supports 25 mA source/sink on I/O lines, enabling direct LED drive in many applications.
Architecturally, the PIC16F1516 combines a wide-voltage CMOS process with sleep currents below 1 µA typical, making it well-suited to battery-powered and energy-harvesting designs. The 17-channel 10-bit ADC plus on-chip voltage reference eliminates external analog components in many sensor interfaces, while the dual CCP and 16-bit timer support motor control, fan control, and SMPS sequencing.
Typical applications include IoT sensor nodes, home automation controllers, low-power wireless sensor platforms (when paired with a sub-GHz or BLE transceiver), battery-powered medical monitors, industrial fan and pump control, LED lighting controllers, and consumer appliances. The 4x4 mm UQFN package allows the part to fit into space-constrained designs that need more peripherals than 8-bit GPIO-limited MCUs.
Design tip: when migrating from a SOIC-28 footprint, verify the UQFN-28 land pattern and use a PCB with ENIG finish for reliable manufacturing. Decouple VDD with a 100 nF X7R ceramic placed within 3 mm of the pin, and route the MCLR pin with a 10 kΩ pull-up. The internal 16 MHz oscillator is factory-trimmed and typically needs no external crystal for cost-sensitive designs.
This page synthesizes distributor pricing, drop-in package-compatible alternatives, and practical design notes not found in the manufacturer datasheet alone.
کے لیے ڈراپ اِن متبادل PIC16F1516-I/MV — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC16F1516-I/MV (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, I/O Pins, Timers, ADC, Core Architecture.
PIC16F1516-I/ML
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F1516T-I/MV
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F1516T-E/MV
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC16F1516-E/MV
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F1513-I/SS
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F1516-I/MV زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Architecture | PIC16 enhanced mid-range 8-bit RISC |
| Instruction Set | 49 instructions, 16-level stack |
| Instruction Cycle Time | 200 ns at 20 MHz |
| زیادہ سے زیادہ کلاک فریکوئنسی | 20 MHz |
| Flash Program Memory | 14 KB (8K x 14) |
| RAM | 512 B |
| Supply Voltage (F variant) | 2.5 V to 5.5 V (PIC16F1516; 1.8 V-3.6 V for LF variant) |
| I/O Pins | 12 (per chipdig listing) / 17 ADC channels |
| ADC | 10-bit, 17 channels, with voltage reference |
| Timers | TMR0 (8-bit), TMR1 (16-bit), TMR2 (8-bit) |
| CCP Modules | 2 (Capture / Compare / PWM) |
| Communication Peripherals | I2C / SPI / EUSART with auto-baud |
| I/O Source/Sink Current | 25 mA |
| Watchdog Timer | Extended WDT |
| Brown-Out Reset | Programmable Ultra Low-Power BOR (ULPBOR) |
| Internal Oscillator | 16 MHz |
| Programming/Debug | ICSP and In-Circuit Debug |
| پیکیج | 28-UQFN (4x4 mm) |
| Operating Temperature (I grade) | -40C to +85C |
| Technology Family | nanoWatt XLP (eXtreme Low Power) |
| ماؤنٹنگ ٹائپ | Surface Mount |
| RoHS اسٹیٹس | Compliant (per distributor listings) |
PIC16F1516-I/MV پن کنفیگریشن
| پن 1 | RA5 — GPIO / ADC AN4 |
| پن 2 | RA4 — GPIO |
| پن 3 | RA3 — GPIO / MCLR |
| پن 4 | RA2 — GPIO / ADC AN2 |
| پن 5 | RA1 — GPIO / ADC AN1 / ICSPCLK |
| پن 6 | RA0 — GPIO / ADC AN0 / ICSPDAT |
| پن 7 | VSS — Ground |
| پن 8 | VDD — Positive supply |
| پن 9 | RB7 — GPIO |
| پن 10 | RB6 — GPIO / ICSPCLK |
| پن 11 | RB5 — GPIO / ADC AN11 |
| پن 12 | RB4 — GPIO / ADC AN10 |
| پن 13 | RC7 — GPIO / RX/DT |
| پن 14 | RC6 — GPIO / TX/CK |
| پن 15 | RC5 — GPIO |
| پن 16 | RC4 — GPIO |
| پن 17 | RC3 — GPIO / SCL |
| پن 18 | RC2 — GPIO / SDA |
| پن 19 | RC1 — GPIO / CCP2 |
| پن 20 | RC0 — GPIO / CCP1 |
| پن 21 | RB3 — GPIO / ADC AN9 |
| پن 22 | RB2 — GPIO / ADC AN8 |
| پن 23 | RB1 — GPIO / ADC AN7 |
| پن 24 | RB0 — GPIO / ADC AN5 / INT |
| پن 25 | RA7 — GPIO / ADC AN6 / VREF+ |
| پن 26 | RA6 — GPIO / VREF- |
| پن 27 | VDD — Positive supply (second pin) |
| پن 28 | VSS — Ground (second pin) |
عام استعمالات
PIC16F1516-I/MV کے لیے موزوں ہے 6 ایپلیکیشنs: IoT Sensor Node Controller, Home Automation Controller, Battery-Powered Medical Monitor, Industrial Fan and Pump Controller, LED Lighting Controller, Consumer Appliance Control Board.
IoT Sensor Node Controller
The PIC16F1516-I/MV is well-suited as the host MCU for low-power IoT sensor nodes that periodically wake, read sensors, transmit data, and return to deep sleep. Its nanoWatt XLP technology delivers sub-1 µA typical sleep current at 2.5 V, while the 14 KB flash accommodates over-the-air firmware update staging. The 17-channel 10-bit ADC with internal voltage reference allows direct interface to multiple analog sensors (temperature, humidity, light, battery voltage) without external components. The 28-UQFN 4x4 mm package fits in coin-cell powered designs. Pair with a sub-GHz or LoRa transceiver for long-range battery telemetry.
تجویز کردہ
Home Automation Controller
In wall-switches, dimmers, and smart-plug designs, the PIC16F1516-I/MV provides the deterministic timing and I/O drive capability needed for reliable AC-line-coupled control. Its 25 mA source/sink I/O directly drives TRIACs, optocouplers, and relay coils, while the dual CCP modules generate zero-cross synchronized PWM for phase-angle dimming. The 17-channel ADC reads current, voltage, and temperature sensors for energy monitoring. I2C / SPI / EUSART with auto-baud connects to Wi-Fi or BLE modules. EUSART auto-baud eliminates crystal calibration on production lines.
تجویز کردہ
Battery-Powered Medical Monitor
Portable medical devices such as glucose meters, pulse oximeters, and thermometers benefit from the PIC16F1516-I/MV's nanoWatt XLP sleep currents and the I-grade operating temperature of -40C to +85C that supports home and clinic environments. The 14 KB flash stores calibration tables and UI strings, while 512 B RAM handles small data buffers. The 10-bit ADC with internal voltage reference simplifies the analog front-end for optical or thermistor sensors. The compact 28-UQFN 4x4 mm package fits inside disposable or reusable handheld enclosures. Hardware CRC and code-protection features support FDA documentation requirements.
تجویز کردہ
Industrial Fan and Pump Controller
The PIC16F1516-I/MV handles single-phase BLDC and brushed DC motor control for industrial fans, water pumps, and HVAC blowers. Its 16-bit TMR1 captures tachometer feedback from Hall sensors, while the dual CCP modules generate complementary PWM with dead-band insertion. The 17-channel ADC monitors motor current (via shunt), supply voltage, and temperature. Programmable ULPBOR survives brown-outs common in industrial AC-line environments. The E temperature-grade variant (PIC16F1516-E/MV) extends operation to +125C junction for sealed-motor applications.
تجویز کردہ
LED Lighting Controller
Architectural and stage LED lighting benefit from the PIC16F1516-I/MV's 25 mA I/O drive (directly switching low-current LED strings), dual CCP PWM channels for color mixing, and EUSART for DMX-512 or proprietary LED-protocol reception. The 17-channel ADC monitors LED forward voltage and ambient light for closed-loop brightness control. The 14 KB flash supports animation sequences and user presets, while nanoWatt XLP sleep extends battery life in portable fixtures. UQFN-28 4x4 mm fits inside LED-driver PCB cutouts without increasing fixture depth.
تجویز کردہ
Consumer Appliance Control Board
Coffee machines, washing machines, and small kitchen appliances use the PIC16F1516-I/MV for front-panel control, sensor fusion, and motor sequencing. The I2C/SPI peripherals connect to capacitive touch ICs and EEPROM; the 10-bit ADC reads thermistors for closed-loop temperature control; the dual CCP drives solenoid valves and pump relays via 25 mA I/O. The 14 KB flash holds UI graphics for segment-LCD panels via the EUSART, while the 512 B RAM manages key-press debounce and timer state. Wide 2.5 V-5.5 V supply tolerates unregulated rectified mains.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC16F1516-I/MV — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC16F1516-I/ML | PIC16F1516T-I/MV | PIC16F1516-E/MV | PIC16F1513-I/SS |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | UQFN-28 (4x4 mm) | UQFN-28 (6x6 mm) - same | UQFN-28 (4x4 mm) - same | UQFN-28 (4x4 mm) - same | SSOP-28 (28-pin, larger) |
| Flash Memory | 14 KB | 14 KB | 14 KB | 14 KB | 7 KB (-50%) |
| RAM | 512 B | 512 B | 512 B | 512 B | 256 B (-50%) |
| Operating Voltage | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V |
| Temperature Grade | I: -40C to +85C | I: -40C to +85C | I: -40C to +85C | E: -40C to +125C | I: -40C to +85C |
| ADC Channels | 17 ch, 10-bit | 17 ch, 10-bit | 17 ch, 10-bit | 17 ch, 10-bit | 17 ch, 10-bit |
| CCP Modules | 2 | 2 | 2 | 2 | 2 |
اہم امتیازی خصوصیات
- Smallest 28-pin UQFN in PIC16F1516 family (بمقابلہPIC16F1516-I/ML)
- Higher temperature grade option exists in same footprint (بمقابلہPIC16F1516-E/MV)
- Larger flash than PIC16F1513 in same pin count (بمقابلہPIC16F1513-I/SS)
ڈیزائن نوٹس
Estimated: at 20 MHz active, VDD=5 V, the PIC16F1516-I/MV draws approximately 4 mA active and <1 µA sleep typical (per PIC16F15xx family datasheet trends). For battery-powered designs, use the SLEEP/IDLE modes aggressively; wake via WDT, ADC conversion-complete interrupt, or external INT on RB0. Place a 100 nF X7R decoupling capacitor within 3 mm of the VDD pin, and a 10 µF bulk cap if the supply rail is shared with a radio module.
The 28-UQFN (4x4 mm) package has a center thermal/exposed pad that must be soldered to a PCB land of at least equal size to meet thermal and mechanical reliability goals. Use NSMD pads with ENIG or OSP finish. The UQFN-28 (4x4) variant ('MV') and UQFN-28 (6x6) variant ('ML') have different PCB footprints - verify the land pattern against the package code before PCB fabrication.
Do not exceed 5.5 V on VDD - the LF variant (1.8 V-3.6 V) is permanently damaged above 4.0 V. Verify the silicon variant before powering up. Leave RA3 configured as MCLR with a 10 kΩ pull-up to VDD; if RA3 is used as GPIO, configure it in CONFIG words. Code-protect unused flash regions if the firmware contains proprietary algorithms.
تعمیل کی معلومات
RoHS and lead-free compliance confirmed by distributor listings (DigiKey, Mouser, LCSC) and Microchip product page. Not AEC-Q100 qualified - this is a general-purpose MCU, not automotive-grade. For automotive applications consult the PIC16F1516-E/MV extended-temperature variant or dedicated AEC-Q100 PICs.
