PIC16F15324-E/SLVAO - 8-bit 32MHz 7KB Flash MCU 14-SOIC | Microchip
MPN: PIC16F15324-E/SLVAO ✓ فعالPIC16F15324-E/SLVAO جائزہ
An 8-bit microcontroller (MCU) is a small, self-contained computing element that integrates a CPU, RAM, non-volatile program memory, and peripherals onto a single silicon die. It belongs to the broader hierarchy: microcontroller -> embedded processor -> semiconductor -> integrated circuit. PIC microcontrollers are widely used in cost- and power-sensitive embedded systems where deterministic real-time behaviour and low part count are priorities. The PIC16F153xx family combines traditional PIC simplicity with modern analog and CIP blocks.
Key features include four 10-bit PWM outputs, a comparator, a 5-bit/8-bit DAC, a 10-bit ADC with computation, a Complementary Waveform Generator (CWG), four Configurable Logic Cells (CLC), and two Enhanced USART peripherals supporting SPI and I²C. The XLP variants deliver nanoWatt sleep currents, making the part attractive for battery-powered and always-on designs such as sensor nodes and remote controls.
Architecturally, the device combines a RISC Harvard-style CPU with on-chip debug, a wide operating voltage range of 2.3 V to 5.5 V, and flexible clocking from internal 32 MHz HFINTOSC down to 31 kHz LFINTOSC. Its CIPs (CLC, CWG, NCO, PWM) execute logic without CPU intervention, offloading timing-critical tasks and reducing firmware complexity.
Typical applications include automotive body electronics, sensor signal conditioning, LED lighting controllers, low-power IoT edge nodes, and general-purpose user-interface boards. The combination of analog integration and XLP makes it especially well suited to mixed-signal nodes that must sleep deeply and wake on analog thresholds.
When designing with this part, place decoupling capacitors (100 nF plus 1 µF) close to VDD/VSS, route the MCLR line carefully if used, and confirm the SOIC-14 footprint matches your PCB land pattern. Always verify the "VAO" automotive flow acceptance against your project's PPAP and quality requirements.
کے لیے ڈراپ اِن متبادل PIC16F15324-E/SLVAO — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC16F15324-E/SLVAO (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف ADC, DAC, PWM Channels, Package, Comparators.
PIC16F15324-E/SL
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F15324-E/SLVAO
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F15324T-E/SLVAO
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F15323-E/SL
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F15325-E/SL
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC16F15324-E/SLVAO زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core | PIC16 8-bit RISC |
| Program Memory (Flash) | 7 KB (4K x 14 words) |
| SRAM | 512 bytes |
| EEPROM | 0 bytes |
| Maximum CPU Frequency | 32 MHz |
| Operating Voltage Range | 2.3 V to 5.5 V |
| پیکیج | 14-pin SOIC (SL) |
| پن کی تعداد | 14 |
| ADC | 10-bit ADC with computation |
| DAC | 5-bit / 8-bit DAC |
| PWM Channels | 4 x 10-bit PWM |
| Comparators | 1 |
| Configurable Logic Cells (CLC) | 4 |
| Complementary Waveform Generator (CWG) | Yes |
| Communication | 2x EUSART (SPI/I²C) |
| eXtreme Low-Power (XLP) | Yes (nanoWatt) |
| Temperature Grade (E suffix) | -40C to +125C (extended) |
| Quality Flow (VAO suffix) | Automotive-grade flow |
| RoHS | Compliant |
PIC16F15324-E/SLVAO پن کنفیگریشن
| پن 1 | RA5 — Bidirectional I/O / ADC input / IOC |
| پن 2 | RA4 — Bidirectional I/O / ADC input |
| پن 3 | RA3 — Bidirectional I/O / MCLR (input only on this pin) |
| پن 4 | RA2 — Bidirectional I/O / analog input |
| پن 5 | RA1 — Bidirectional I/O / analog / DAC reference |
| پن 6 | RA0 — Bidirectional I/O / analog / DAC output |
| پن 7 | VSS — Ground reference |
| پن 8 | RA7 — Bidirectional I/O / oscillator / DAC |
| پن 9 | RA6 — Bidirectional I/O / oscillator |
| پن 10 | RC5 — Bidirectional I/O / PWM / EUSART |
| پن 11 | RC4 — Bidirectional I/O / PWM / EUSART |
| پن 12 | RC3 — Bidirectional I/O / PWM / SPI/I²C |
| پن 13 | RC2 — Bidirectional I/O / PWM / SPI/I²C |
| پن 14 | VDD — Positive supply (2.3 V to 5.5 V) |
عام استعمالات
PIC16F15324-E/SLVAO کے لیے موزوں ہے 6 ایپلیکیشنs: Automotive Body Electronics, Low-Power IoT Sensor Node, LED Lighting Controller, User Interface Board, Industrial Sensor Signal Conditioning, General-Purpose Embedded Control.
Automotive Body Electronics
The PIC16F15324-E/SLVAO's "VAO" automotive quality flow makes it suited for non-safety body-electronics modules such as interior lighting, mirror control, and HVAC damper actuators. With 7 KB Flash for application logic, 512 B SRAM for state variables, and four 10-bit PWM channels, the part can directly drive LED drivers or small brushed-motor H-bridges without an external timer IC. The 2.3 V to 5.5 V supply range tolerates cranking transients on 12 V automotive rails when paired with a regulator. CIPs such as the CWG and CLC offload PWM sequencing from the CPU, leaving MIPS for CAN-LIN-style UART traffic and diagnostics. For automotive buyers, VAO flow provides the change-notification discipline required by OEM PPAP gates.
تجویز کردہ
Low-Power IoT Sensor Node
The PIC16F15324-E/SLVAO's eXtreme Low-Power (XLP) technology with nanoWatt sleep currents allows multi-year battery life in intermittently-sampling sensor nodes such as HVAC thermostats, environmental loggers, or asset trackers. The 10-bit ADC with computation provides on-chip averaging and threshold detection, letting the MCU wake the CPU only when meaningful data is present, while the CLCs implement glue logic between sensors without burning MIPS. The 14-SOIC package is friendly to hand-soldered prototypes and reflow production alike. Two EUSARTs support SPI/I²C sensor interfacing and a debug UART without conflict, and 32 MHz HFINTOSC eliminates the external crystal for cost-sensitive nodes.
تجویز کردہ
LED Lighting Controller
The PIC16F15324-E/SLVAO's four 10-bit PWM channels plus the Complementary Waveform Generator (CWG) deliver hardware-driven LED dimming with programmable dead-band control, ideal for RGB-W architectural fixtures, under-cabinet lighting, and decorative strips. The CIP architecture lets the CWG run autonomously after initial setup, freeing the CPU to handle higher-level tasks such as DMX-512 protocol parsing over a UART or button-input debouncing via CLC. The wide 2.3 V to 5.5 V supply accommodates both 3.3 V logic-level strips and 5 V analog-PWM dimming interfaces. For automotive interior lighting the VAO flow helps satisfy OEM quality expectations without migrating to a full Q-100 part.
تجویز کردہ
User Interface Board
The PIC16F15324-E/SLVAO provides a compact MCU solution for small user-interface boards such as appliance control panels, remote-control keypads, and HMI key fobs, where cost and PCB area are dominant constraints. The 14-SOIC package occupies less board space than 20- or 28-pin alternatives, while the 32 MHz core handles capacitive-touch scanning via the on-chip comparator and CLC-based timing logic. Two EUSARTs allow a UART console link plus an SPI display interface, with the 10-bit ADC available for rotary-encoder or thermistor input. Sleep current in the nanoAmp range lets battery-powered remotes ship with coin-cell primary batteries and multi-year replacement intervals.
تجویز کردہ
Industrial Sensor Signal Conditioning
The PIC16F15324-E/SLVAO's analog integration - 10-bit ADC, 5/8-bit DAC, comparator, and CLCs - supports cost-effective 4-20 mA loop transmitters, RTD signal conditioning, and bridge-sensor excitation in industrial modules. The DAC can generate precision excitation while the ADC measures the bridge response, all under CPU supervision or autonomously via CIPs. Operating from 2.3 V to 5.5 V and -40C to +125C, the part meets harsh industrial environments with adequate supply design. Two EUSARTs provide both HART-like modem UART and an RS-485 interface, while XLP low-power modes help loop-powered 4-20 mA transmitters stay under 3.5 mA budget.
تجویز کردہ
General-Purpose Embedded Control
Beyond specialised applications, the PIC16F15324-E/SLVAO functions as a capable general-purpose MCU for hobby projects, educational kits, and small-volume embedded products where its 7 KB Flash, 512 B SRAM, and broad peripheral set are well matched to typical tasks like fan controllers, simple motor drivers, or smart-home bridges. The free MPLAB X IDE and XC8 compiler toolchain, plus the PICkit 4 programmer/debugger, give students and professionals a low-cost development environment. The 14-SOIC package is breadboard-compatible through adapter boards and easy to hand-solder for prototypes, and Microchip's CIP library of configuration code accelerates time-to-first-sample.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC16F15324-E/SLVAO — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC16F15324-E/SL | PIC16F15323-E/SL | PIC16F15325-E/SL |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 14-SOIC (SL) | 14-SOIC (SL) - same | 14-SOIC (SL) - same | 14-SOIC (SL) - same |
| Program Memory (Flash) | 7 KB | 7 KB (identical) | 3.5 KB (-50%) | 14 KB (+100%) |
| SRAM | 512 bytes | 512 bytes (identical) | 256 bytes (-50%) | 1024 bytes (+100%) |
| Maximum CPU Frequency | 32 MHz | 32 MHz (identical) | 32 MHz (identical) | 32 MHz (identical) |
| Quality Flow | Automotive ("VAO") | Standard (non-automotive) | Standard | Standard |
| Operating Voltage Range | 2.3 V to 5.5 V | 2.3 V to 5.5 V (identical) | 2.3 V to 5.5 V (identical) | 2.3 V to 5.5 V (identical) |
| Temperature Grade (E suffix) | -40C to +125C | -40C to +125C (identical) | -40C to +125C (identical) | -40C to +125C (identical) |
| Peripherals (ADC / PWM / EUSART) | 10-bit ADC / 4 PWM / 2 EUSART | 10-bit ADC / 4 PWM / 2 EUSART | 10-bit ADC / 4 PWM / 2 EUSART | 10-bit ADC / 4 PWM / 2 EUSART |
| RoHS Status | Compliant | Compliant | Compliant | Compliant |
اہم امتیازی خصوصیات
- Automotive "VAO" quality flow at a standard-MCU price point (بمقابلہPIC16F15324-E/SL)
- 7 KB Flash / 512 B SRAM is the family sweet-spot for code density (بمقابلہPIC16F15323-E/SL)
- Upward-compatible upgrade path to PIC16F15325 with double memory (بمقابلہPIC16F15325-E/SL)
ڈیزائن نوٹس
Estimated: the PIC16F15324-E/SLVAO typically draws 6 mA active at 32 MHz, dropping to under 1 µA in Sleep with full RAM retention. Place a 100 nF decoupling capacitor as close as physically possible to the VDD pin (14) and a bulk 1 µF to 10 µF capacitor nearby to handle switching transients when peripherals wake the core. For battery-powered designs, route all unused I/O as outputs driven low to minimise shoot-through current. The XLP Sleep mode preserves SRAM down to 1.8 V (VBOR), but always check the BOR configuration bit to match the application's lowest allowable supply.
The 14-SOIC footprint follows JEDEC MS-012 with 1.27 mm pin pitch; verify your PCB land pattern is non-solder-mask-defined with a minimum pad length of 1.5 mm for reliable hand-soldering. Place the decoupling capacitors within 2 mm of VDD/VSS to keep the high-frequency current loop area small, and route MCLR with a 10 kΩ pull-up and optional 100 nF to ground if you need a hardware reset path. For automotive PCB designs, use a four-layer stack-up with a continuous ground plane under the IC to improve EMI immunity and reduce radiated emissions.
Three common pitfalls: (1) The PIC16F153xx family has 0 bytes of EEPROM - engineers familiar with older PIC16 parts will be tempted to call EEPROM routines; instead use Flash self-write with the wear-levelling pattern documented in Microchip application notes. (2) RA3 doubles as the MCLR input by configuration - if MCLR is enabled, RA3 cannot be used as a general-purpose I/O, and the pin is input-only with a weak pull-up. (3) Do not assume the 32 MHz HFINTOSC is accurate enough for UART communication - calibrate the OSCTUNE register against a known reference or use an external crystal when UART baud-rate tolerance must stay below 2%.
تعمیل کی معلومات
"VAO" suffix indicates Microchip automotive quality flow. Part is RoHS compliant per Microchip product page. AEC-Q100 is not formally claimed on the public datasheet; confirm with Microchip for safety-critical automotive qualifications.
