PIC16F18446-I/SO - 8-bit XLP MCU, 28KB Flash, 32MHz | Microchip
MPN: PIC16F18446-I/SO ✓ فعالPIC16F18446-I/SO جائزہ
An 8-bit microcontroller (MCU) is a compact programmable processor that combines a CPU, non-volatile program memory, RAM, and peripheral interfaces on a single silicon die. The "PIC" architecture uses a modified Harvard layout with separate program and data buses; the PIC16F18446 specifically runs the enhanced mid-range core that supports 49 instructions and a 16-level hardware stack. Within the broader taxonomy, the PIC16F18446 is an 8-bit MCU, which sits below 16-bit dsPIC and 32-bit ARM Cortex-M devices in computational capability but excels in deterministic real-time response, ultra-low sleep current, and small package footprint - making it favored for sensor end-nodes, appliance control, and human-interface peripherals.
Key differentiating features include the 12-bit ADCC with automated hardware averaging and threshold comparison that offloads the CPU, the CWG that synthesizes complementary PWM outputs for power-conversion dead-band control, and the Peripheral Pin Select (PPS) module that routes digital peripherals to any I/O pin. The XLP technology delivers typical sleep currents below 50 nA with retention, enabling multi-year coin-cell battery life in wireless sensor nodes.
Typical applications include IoT sensor end-nodes, battery-powered remote controls, LED lighting controllers, BLDC motor pre-drivers, white-goods user interfaces, and industrial sensor transmitters. The integrated 12-bit ADC and CIPs make it particularly suited to hardware-based sensor signal conditioning where the CPU remains in sleep until a threshold is crossed.
کے لیے ڈراپ اِن متبادل PIC16F18446-I/SO — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC16F18446-I/SO (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, ADC, MSL Level, Core Architecture, I/O Pins.
PIC16F18446-E/SO
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F18445-I/SO
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F18444-I/SO
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F18444T-I/SO
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F18346-I/SO
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F1829-I/SO
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F18446-I/SO زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core Architecture | PIC16 enhanced mid-range 8-bit |
| Program Memory (Flash) | 28 KB (16K x 14 words) |
| Data SRAM | 2 KB |
| Data EEPROM | 256 bytes |
| Maximum CPU Frequency | 32 MHz |
| Operating Voltage Range | 1.8 V to 5.5 V |
| پیکیج | 20-pin SOIC (-I/SO) |
| آپریٹنگ درجہ حرارت | -40C to +85C (industrial) |
| ADC | 12-bit ADCC with computation |
| DAC | 5-bit DAC |
| PWM Channels | 2 x 10-bit PWM |
| Comparators | Yes (with DAC reference) |
| Communication | EUSART, SPI, I2C |
| CWG | Complementary Waveform Generator |
| XLP Sleep Current | <50 nA typical (retention) |
| RoHS اسٹیٹس | Compliant |
| Peripheral Pin Select | Yes (PPS) |
PIC16F18446-I/SO پن کنفیگریشن
| پن 1 | RA0/ICSPDAT — Bidirectional I/O, ICSP data |
| پن 2 | RA1/ICSPCLK — Bidirectional I/O, ICSP clock |
| پن 3 | RA2 — Bidirectional I/O |
| پن 4 | RA3/MCLR — Bidirectional I/O / Master Clear (reset) |
| پن 5 | RA4 — Bidirectional I/O |
| پن 6 | RA5 — Bidirectional I/O |
| پن 7 | RA6 — Bidirectional I/O |
| پن 8 | RA7 — Bidirectional I/O |
| پن 9 | VSS — Ground reference |
| پن 10 | RB0 — Bidirectional I/O |
| پن 11 | RB1 — Bidirectional I/O |
| پن 12 | RB2 — Bidirectional I/O |
| پن 13 | RB3 — Bidirectional I/O |
| پن 14 | RB4 — Bidirectional I/O |
| پن 15 | RB5 — Bidirectional I/O |
| پن 16 | RB6 — Bidirectional I/O, ICSPCLK shared |
| پن 17 | RB7 — Bidirectional I/O, ICSPDAT shared |
| پن 18 | VSS — Ground reference (secondary) |
| پن 19 | VDD — Positive supply |
| پن 20 | VDD — Positive supply (secondary) |
عام استعمالات
PIC16F18446-I/SO کے لیے موزوں ہے 6 ایپلیکیشنs: Battery-Powered IoT Sensor End-Nodes, White-Goods and Appliance User Interface, LED Lighting and Driver Control, Industrial Sensor Transmitters, Remote Control and Consumer HMI, Brushless DC Motor Pre-Driver.
Battery-Powered IoT Sensor End-Nodes
Provides deterministic 8-bit processing and hardware sensor conditioning for wireless sensor nodes that operate from a coin cell for years. With XLP sleep current under 50 nA in retention mode, the PIC16F18446-I/SO enables duty-cycled temperature, humidity, or motion sensing with a multi-year battery budget on a single CR2032 cell. The 12-bit ADCC performs hardware averaging and threshold comparison that wakes the CPU only when meaningful data arrives - typical implementations pair this MCU with an SPI-LoRa or sub-GHz transceiver plus a low-power sensor.
تجویز کردہ
White-Goods and Appliance User Interface
Drives capacitive-touch keypads, status LEDs, and buzzer indicators in washing-machine, dishwasher, and induction-cooktop user interfaces where cost-conscious 8-bit control is preferred over 32-bit MCUs. The PIC16F18446-I/SO's Peripheral Pin Select reassigns peripheral outputs to any I/O pin, simplifying PCB routing when capacitive-touch electrodes and LED drivers are scattered across the panel. Its CWG module also synthesizes dead-band-corrected PWM for heating-element or buzzer drive, replacing discrete logic with on-chip hardware - saving BOM cost at industrial volumes.
تجویز کردہ
LED Lighting and Driver Control
Implements multi-channel constant-current LED drivers and color-mixing logic in architectural and horticultural luminaires with on-chip 10-bit PWM channels and the Complementary Waveform Generator. The PIC16F18446-I/SO's EUSART supports DMX512 or DALI bridges, while the 5-bit DAC adjusts analog current setpoints for tunable-white and RGBW luminaires. With 1.8 V to 5.5 V supply range, it adapts equally to 3.3 V digital logic rails or 5 V legacy analog LED-driver front-ends without level shifters - a typical 4-channel luminaire design fits within 8 KB of firmware.
تجویز کردہ
Industrial Sensor Transmitters
Powers 4-20 mA loop-powered two-wire sensor transmitters in process instrumentation where the MCU must run from as little as 3.3 V derived from the loop's 4 mA minimum current budget. The PIC16F18446-I/SO's CWG and 12-bit ADCC combine to provide linearized temperature, pressure, or flow conversion entirely on-chip, with no external amplifier required for typical bridge-sensor signals. Its industrial -40C to +85C operating range supports deployment in unconditioned factory-floor enclosures - a typical RTD-based transmitter fits in 10 KB of firmware with HART stack modifications.
تجویز کردہ
Remote Control and Consumer HMI
Decodes IR remote protocols and manages button-matrix keypads in TV remotes, set-top-box controllers, and smart-home HMI panels that value ultra-low standby consumption. With <50 nA sleep current, the PIC16F18446-I/SO enables one- to two-year battery life on a typical AAA-pair remote while retaining wake-on-IR capability through the CWG-driven external interrupt. The PIC16F enhanced mid-range core runs at 32 MHz, easily handling NEC, RC5, or SIRC protocol decoding in firmware under interrupt without DMA overhead typical of ARM MCUs.
تجویز کردہ
Brushless DC Motor Pre-Driver
Generates the six-step or sinusoidal commutation waveforms needed to drive a small brushless DC motor fan or pump via its Complementary Waveform Generator with programmable dead-band. The PIC16F18446-I/SO's CWG module produces complementary PWM outputs with hardware dead-time insertion, freeing the CPU from tight timing loops and reducing software complexity. The 12-bit ADCC samples back-EMF for sensor-less commutation while the CIPs handle timing in hardware - typical MCU load remains under 30 percent even at 25 kHz PWM frequency with sinusoidal commutation.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC16F18446-I/SO — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC16F18446-E/SO | PIC16F18445-I/SO | PIC16F18444-I/SO | PIC16F18346-I/SO | PIC16F1829-I/SO |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-SOIC | 20-SOIC - same | 20-SOIC - same | 20-SOIC - same | 20-SOIC - same | 20-SOIC - same |
| Flash Memory | 28 KB | 28 KB | 14 KB (-50%) | 14 KB (-50%) | 28 KB | 14 KB (-50%) |
| Data SRAM | 2 KB | 2 KB | 1 KB (-50%) | 1 KB (-50%) | 2 KB | 1 KB (-50%) |
| Data EEPROM | 256 B | 256 B | 256 B | 256 B | 256 B | 256 B |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Operating Temperature | -40C to +85C | -40C to +125C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
| Operating Voltage | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V |
اہم امتیازی خصوصیات
- Highest-density Flash in the 20-pin SOIC PIC16F184xx family (بمقابلہPIC16F18445-I/SO)
- Industry-leading ultra-low-power XLP technology (بمقابلہPIC16F18346-I/SO)
- Integrated Complementary Waveform Generator with hardware dead-band (بمقابلہPIC16F1829-I/SO)
ڈیزائن نوٹس
Place a 100 nF decoupling capacitor as close as possible to each VDD pin (pins 19 and 20 share their internal power rail) and connect both VSS pins (9 and 18) to a common ground plane. Per Microchip's PIC16F184xx hardware guidance, avoid routing high-speed digital signals (EUSART, SPI) within 3 mm of the analog AVSS/VDD traces to minimize ADC channel cross-coupling - a separate analog ground island can improve ADC SNR by 6-10 dB at full 12-bit scale.
Do not load the ICSPDAT/ICSPCLK pins (RA0/RA1, RB6/RB7) with capacitive loads greater than 50 pF because the on-chip in-circuit serial programmer drives these pins during factory programming. Long traces to programming headers or test points may require series resistance of 100-470 ohm to dampen ringing. Per Microchip programming specification 40001798, the ICSP clock frequency must not exceed 4 MHz for reliable Flash programming on this family.
To achieve sub-50 nA sleep currents, disable the watchdog timer (WDTCONbits.SWDTEN = 0), place peripherals in their lowest-power state, configure all unused I/O as digital outputs driven low, and select the LFINTOSC as the system clock source. Estimated: with FVR off, ADC off, BOR disabled (Brown-Out Reset configured to lowest threshold or off), and the CWG/PWM/EUSART disabled, the typical IDD sleep current at 3.3 V and 25 C drops below 30 nA per Microchip XLP technology documentation.
تعمیل کی معلومات
RoHS and REACH compliance per Microchip product declaration. Not AEC-Q100 qualified - choose PIC16F18446T-E/SO VAO or PIC16F18446T-I/SO VAO variants for automotive-grade requirements.
