PIC16F630T-E/SL - 8-bit 20MHz MCU 1.75KB Flash SOIC-14 | Microchip
MPN: PIC16F630T-E/SL ✓ فعالPIC16F630T-E/SL جائزہ
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and peripheral functions such as timers, comparators, and I/O ports. The PIC16F630 belongs to Microchip's PIC16 mid-range family — a category hierarchy of 8-bit microcontroller -> RISC MCU -> embedded controller -> semiconductor. Mid-range PIC MCUs use a 14-bit instruction word architecture optimized for deterministic interrupt response and small code size, supporting only 35 single-word instructions for simplified embedded firmware development.
Key features include a 20 MHz internal/external oscillator, 12 I/O pins with individual direction control, a hardware 8-bit timer (Timer0) plus a 16-bit Timer1, one analog comparator with selectable reference, brown-out reset (BOR), power-on reset (POR), watchdog timer (WDT), and an in-circuit serial programming (ICSP) interface. The device operates across 4.5 V to 5.5 V and consumes a few mA in active mode with nanoampere sleep currents suitable for battery-aware designs.
Typical applications include low-cost consumer appliances, automotive body electronics (interior lighting, sensor conditioning), industrial control logic, battery chargers, simple sensor interfaces, and remote-control transmitters. The compact 14-pin SOIC footprint and 35-instruction RISC core make it attractive for high-volume cost-sensitive products requiring reliable field upgradability via Flash.
When designing with this MCU, ensure decoupling on VDD, observe the 4.5 V minimum supply requirement, and allocate adequate Flash headroom for bootloaders or future firmware updates. For new designs consider the suggested Microchip newer-device replacement PIC16F18324, which adds enhanced peripherals while preserving pin compatibility.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
کے لیے ڈراپ اِن متبادل PIC16F630T-E/SL — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC16F630T-E/SL (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Operating Temperature, Package, Core Architecture, Internal Oscillator, Instruction Execution Time.
PIC16F630-E/SL
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F630-I/SL
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F630-I/ST
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F630-E/ST
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F676-E/SL
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC16F630T-E/SL زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core Processor | PIC |
| Core Size | 8-Bit |
| Core Series | PIC® 16F |
| Instruction Set | 35 single-word instructions |
| Instruction Execution Time | 200 ns at 20 MHz |
| Clock Speed | 20 MHz |
| Program Memory Type | Flash |
| Program Memory Size | 1.75 KB (1K x 14 words) |
| EEPROM Data Memory | 128 bytes |
| SRAM Data Memory | 64 bytes |
| Number of I/O Pins | 12 |
| Supply Voltage (VDD) | 4.5 V to 5.5 V |
| آپریٹنگ درجہ حرارت | -40 C to +125 C (Extended, E grade) |
| پیکیج | 14-SOIC (3.90 mm width, SL suffix) |
| ماؤنٹنگ ٹائپ | Surface Mount |
| Peripherals | Brown-out Detect/Reset, POR, WDT, 1 Comparator |
| Connectivity | ICSP (In-Circuit Serial Programming) |
| Packaging | Tape & Reel (T-suffix) |
PIC16F630T-E/SL پن کنفیگریشن
| پن 1 | RA0/AN0 — Bidirectional I/O / analog comparator input |
| پن 2 | RA1/AN1 — Bidirectional I/O / analog comparator input |
| پن 3 | RA2/AN2 — Bidirectional I/O / analog comparator input |
| پن 4 | RA3/MCLR/VPP — Bidirectional I/O / Master Clear (reset) / programming voltage |
| پن 5 | RA4/OSC2/CLKOUT — Bidirectional I/O / oscillator output / clock output |
| پن 6 | RA5/OSC1/CLKIN — Bidirectional I/O / oscillator input / external clock input |
| پن 7 | VSS — Ground reference |
| پن 8 | RB0/INT — Bidirectional I/O / external interrupt |
| پن 9 | RB1/RX/DT — Bidirectional I/O |
| پن 10 | RB2 — Bidirectional I/O |
| پن 11 | RB3/CCP1 — Bidirectional I/O / Capture/Compare/PWM |
| پن 12 | RB4 — Bidirectional I/O / interrupt-on-change |
| پن 13 | RB5 — Bidirectional I/O / interrupt-on-change |
| پن 14 | VDD — Positive supply (4.5 V to 5.5 V) |
عام استعمالات
PIC16F630T-E/SL کے لیے موزوں ہے 6 ایپلیکیشنs: Automotive Body Electronics, Battery-Powered Sensor Node, Industrial Control Logic, Consumer Appliance Controller, LED Lighting Driver, Remote Control Transmitter.
Automotive Body Electronics
The PIC16F630T-E/SL suits automotive body modules such as interior LED drivers, mirror controllers, and seat-occupancy sensors where 5 V operation across -40 C to +125 C (E grade) is required. With 12 I/O pins, one analog comparator for sensor threshold detection, and brown-out reset for crank-cycle voltage drops, it reliably handles body-network loads. The 20 MHz core executes ~5 MIPS, sufficient for PWM dimming loops and LIN-slavish bit-banged interfaces. Power-on reset (POR) plus WDT protect against lockup during load-dump transients.
تجویز کردہ
Battery-Powered Sensor Node
For battery-powered wireless sensor or remote-control applications the PIC16F630T-E/SL offers Sleep-mode currents in the nanoampere range plus a wake-on-pin-change interrupt. Its 5 V operation pairs with a boost converter from a single Li-coin cell, while the 1.75 KB Flash comfortably fits sensor-fusion plus RF protocol stack snippets. The 128-byte EEPROM stores calibration constants across power cycles. Brown-out reset prevents corrupted Flash writes at end-of-life battery voltage.
تجویز کردہ
Industrial Control Logic
Industrial control logic — relay drivers, opto-isolated input conditioning, simple PLC sub-blocks — fits the PIC16F630T-E/SL well thanks to its E-grade temperature range and proven PIC16 mid-range architecture. Twelve I/O pins multiplex to multiple relay banks; the analog comparator implements zero-cross or current-sense threshold detection. WDT and BOR combined provide the robustness needed in noisy 24 V cabinet environments. ICSP allows firmware patching without removing the controller from the field.
تجویز کردہ
Consumer Appliance Controller
Small kitchen and home appliances — coffee makers, blenders, rice cookers, fan controllers — leverage the PIC16F630T-E/SL's small footprint, 35-instruction RISC core, and Flash upgradability. The 20 MHz core easily handles keypad scanning, triac zero-cross timing, and temperature control loops using the analog comparator with on-chip reference. The 14-SOIC package fits densely populated appliance PCBs. EEPROM retains user-set preferences across power cycles.
تجویز کردہ
LED Lighting Driver
LED driving circuits — architectural strips, signage, decorative lighting — use the PIC16F630T-E/SL for constant-current PWM control at modest brightness levels. The 8-bit Timer0 generates PWM frequencies above 1 kHz to avoid flicker; the comparator monitors LED current via a sense resistor and provides hardware over-current protection. With 12 I/O pins a single MCU drives up to three RGB channels. The wide temperature range suits outdoor luminaires in cold or hot climates.
تجویز کردہ
Remote Control Transmitter
RF/IR remote controls, key fobs, and wireless keypads benefit from the PIC16F630T-E/SL's tiny 14-SOIC footprint, ultra-low Sleep current, and ICSP field programming. The MCU generates ASK/FSK carrier waveforms using Timer0 PWM while bit-banging the RF encoder data stream. Comparator-based low-battery detection warns the user when to replace cells. The E temperature grade supports automotive key-fob environments down to -40 C.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC16F630T-E/SL — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC16F630-E/SL | PIC16F630-I/SL | PIC16F630-I/ST | PIC16F630-E/ST | PIC16F676-E/SL |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 14-SOIC (SL) 3.90 mm | 14-SOIC (SL) - identical | 14-SOIC (SL) - identical | 14-TSSOP (ST) - narrower, taller | 14-TSSOP (ST) - narrower, taller | 14-SOIC (SL) - identical |
| Core Speed | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Flash Memory | 1.75 KB | 1.75 KB | 1.75 KB | 1.75 KB | 1.75 KB | 1.75 KB |
| Temperature Grade | E (-40 C to +125 C) | E (-40 C to +125 C) | I (-40 C to +85 C) | I (-40 C to +85 C) | E (-40 C to +125 C) | E (-40 C to +125 C) |
| ADC | No (comparator only) | No (comparator only) | No (comparator only) | No (comparator only) | No (comparator only) | Yes (10-bit ADC) |
| Comparators | 1 | 1 | 1 | 1 | 1 | 2 |
| Packaging Format | Tape & Reel | Tube | Tube | Tube | Tube | Tube |
| Approx Unit Price (qty 1) | USD 1.85 | USD 1.80 | USD 1.65 | USD 1.75 | USD 1.85 | USD 1.95 |
اہم امتیازی خصوصیات
- Lower unit cost than PIC16F628A family for sub-2K code-size designs (بمقابلہPIC16F628A-I/SO)
- Extended -40 to +125 C operating range with E temperature grade (بمقابلہPIC16F630-I/SL)
- Tape-and-reel packaging for high-volume SMT assembly (بمقابلہPIC16F630-E/SL)
ڈیزائن نوٹس
Estimated: at 5 V supply and 20 MHz active operation the PIC16F630T-E/SL draws approximately 5-8 mA. Decouple VDD with a 100 nF ceramic capacitor placed within 5 mm of pin 14, plus a bulk 10 uF tantalum or aluminum near the regulator. Brown-out reset should be enabled in configuration bits (BOREN = 1) so that the MCU resets cleanly when VDD dips below ~4.0 V, preventing Flash corruption. Add a ferrite bead on VDD if the supply shares noisy relay drivers.
Route MCLR (pin 3) with a 10 kohm pull-up to VDD and place a 100 nF cap to ground if long cables attach, preventing spurious resets from EMI. Keep the ICSP traces (PGC/PGD) short and avoid running them parallel to switching nodes. The 14-SOIC land pads should follow the JEDEC MS-012 footprint with 1.27 mm pitch; for hand-prototyping use SOIC-to-DIP adapter boards. Exposed thermal considerations are minimal due to low power dissipation.
Do not confuse the T-suffix (tape-and-reel packaging) with a temperature-grade change; PIC16F630T-E/SL retains the E-grade -40/+125 C range. Configuration bits (CONFIG register) must be programmed correctly — disable the watchdog only if the firmware loop is proven reliable. When migrating to PIC16F18324 (newer replacement) verify the oscillator configuration bits and CCP pin mapping differ; do not assume a transparent drop-in.
For external clock input (RA5/OSC1), keep the trace shorter than 20 mm and surround with a ground guard ring to suppress ringing. Internal 4 MHz RC oscillator is factory calibrated to within 1 percent per Microchip datasheet 40044G; for UART or USB timing, use a crystal on RA4/RA5. Add a 10-22 pF load capacitor to ground on each oscillator pin matching the crystal manufacturer's spec.
تعمیل کی معلومات
RoHS-compliant per Microchip product page. Lead-free matte-tin finish on 14-SOIC. AEC-Q100 not applicable for this generic-grade MCU; for AEC-Q100 qualified 8-bit PICs consider PIC16F18324-Q1 or PIC16F88T-I/SO. Halogen-free status not stated in the verified data.
