Microchip Technology

PIC16F874T-10E/PQ - 8-bit Flash MCU, 7KB, 20MHz, MQFP-44 | Microchip

MPN: PIC16F874T-10E/PQ ✓ فعال
4.0 V to 5.5 V Vdss MQFP-44 (PQ) Package 20 MHz (10 MHz instruction rate) Speed Flash Memory
MOQ: 1 |

PIC16F874T-10E/PQ جائزہ

The Microchip Technology PIC16F874T-10E/PQ is a member of the PIC16F87x family of 8-bit CMOS Flash microcontrollers with nanoWatt Technology, offering 7KB of on-chip Flash program memory, 192 bytes of RAM, and 128 bytes of EEPROM in a 44-pin MQFP (PQ) package. Operating at up to 20 MHz (10 MHz instruction-cycle equivalent at the '10' speed grade), it integrates 33 digital I/O pins, a 10-bit ADC with up to 8 channels, two 8-bit timers and one 16-bit timer, an enhanced USART, MSSP (SPI/I2C), and a Capture/Compare/PWM (CCP) module for embedded control designs.

A microcontroller (MCU) is a single-chip computer containing a CPU, RAM, non-volatile program memory, and configurable peripherals on one die. Within the broader taxonomy, the PIC16F874 belongs to the 8-bit microcontroller class (Harvard architecture, RISC instruction set), which sits under the larger umbrella of microcontrollers -> embedded processors -> semiconductors. The '16F' prefix identifies the mid-range PIC family; the 'F' suffix indicates Flash program memory, which is in-circuit programmable and electrically erasable - ideal for prototyping and field-upgradable designs.

Key features include a wide 4.0 V to 5.5 V supply range, 25 mA source/sink per I/O, an internal 8 MHz oscillator option, and the nanoWatt power-management family features such as alternate oscillator modes and Sleep with wake-up by external interrupt or Watchdog Timer. The 10-bit A/D converter delivers 8 input channels multiplexed across PORTA and PORTE, and the Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) supports RS-232 and RS-485 interfaces. The In-Circuit Serial Programming (ICSP) interface and In-Circuit Debugger (ICD) support significantly accelerate firmware development on this part.

Typical applications include industrial automation (sensor conditioning, control loops), automotive subsystems (body and comfort electronics, where the 'E' extended-temperature grade matters), consumer appliances (white goods, thermostats), and embedded control boards (HVAC, security panels, motor drivers). The 33-I/O count and 7KB Flash make this part well-suited to mid-complexity applications where larger 40-pin+ MCUs are not justified.

When designing with this part, ensure the decoupling capacitor is placed within 5 mm of VDD and place a 100 nF plus a bulk 10 uF capacitor combination. Note that the 'T' suffix denotes Tape & Reel packaging, '10' is the 10 MHz speed grade, 'E' is the extended (-40C to +125C) temperature grade, and 'PQ' identifies the 44-pin MQFP package.

This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found on any single manufacturer datasheet - giving procurement and design engineers a single source of truth for PIC16F874T-10E/PQ selection.

کے لیے ڈراپ اِن متبادل PIC16F874T-10E/PQ — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC16F874T-10E/PQ (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Core Architecture, Timers, Maximum Clock Frequency, Package, ADC.

Microchip Technology
Core Architecture: 8-bit RISC (PIC16 mid-range)
Timers: 2 x 8-bit + 1 x 16-bit with CCP
Maximum Clock Frequency: 20 MHz (4 MHz external oscillator for -04 speed grade)
Microchip Technology
Core Architecture: 8-bit RISC (Harvard, 14-bit instruction word)
Timers: Timer0, Timer1, Timer2
Maximum Clock Frequency: 10 MHz (200 ns instruction cycle)
Microchip Technology
Core Architecture: PIC16 (8-bit RISC Harvard)
Timers: 3 x (Timer0, Timer1, Timer2)
Maximum Clock Frequency: 20 MHz
Microchip Technology
Core Architecture: PIC16 RISC (Harvard)
Timers: 2 x 8-bit + 1 x 16-bit
Package: 44-MQFP (10 mm x 10 mm)

PIC16F874-10E/PQ

✅ ڈراپ-اِن
📦 MQFP-44 (PQ)
same die and pinout, Tray packaging instead of T&R; identical electrical specs

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

PIC16F874T-04E/PQ

✅ ڈراپ-اِن
📦 MQFP-44 (PQ)
same MQFP-44 pinout, but 4 MHz instruction rate (-60%) vs 10 MHz

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

PIC16F874-04E/PQ

✅ ڈراپ-اِن
Microchip Technology
📦 MQFP-44 (PQ)
8-bit RISC (PIC16 mid-range) · 14-bit · 35 (single-word) · FLASH · 7 KB (4K x 14) · 192 bytes · 128 bytes · 20 MHz (4 MHz external oscillator for -04 speed grade)

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

PIC16F874T-10I/PQ

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 MQFP-44 (PQ)
same die, industrial temp range -40C to +85C (vs -40C to +125C 'E' grade)

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

PIC16F874A-I/PQ

✅ ڈراپ-اِن
📦 MQFP-44 (PQ)
improved silicon revision ('A'), same pinout, 20 MHz, identical Flash/RAM/EEPROM

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

PIC16F874T-10E/PQ زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Core Architecture PIC 8-bit (Harvard RISC)
Program Memory Type Flash
Program Memory Size 7 KB (4K x 14 words)
RAM Size 192 bytes
EEPROM Size 128 bytes
Instruction Set Word Size 14-bit
Number of Instructions 35 (single-word)
زیادہ سے زیادہ کلاک فریکوئنسی 20 MHz (10 MHz instruction rate)
Instruction Execution Time 200 ns @ 20 MHz
Supply Voltage (VDD) 4.0 V to 5.5 V
I/O Pins 33
Timers 2 x 8-bit, 1 x 16-bit
ADC 10-bit, 8 channels
Communication Interfaces EUSART (RS-232/RS-485), MSSP (SPI / I2C)
CCP Modules 1 (Capture/Compare/PWM)
آپریٹنگ درجہ حرارت رینج -40C to +125C (E grade)
پیکیج MQFP-44 (PQ)
ماؤنٹنگ ٹائپ Surface Mount
MSL لیول 3 (per JEDEC J-STD-020)
RoHS اسٹیٹس Compliant
Lead-Free Yes
Speed Grade Suffix 10 = 10 MHz instruction-cycle max
Temperature Grade Suffix E = Industrial/Automotive Extended
Packaging Suffix T = Tape & Reel
Programmable via ICSP Yes
Watchdog Timer Yes (with dedicated on-chip RC oscillator)
Brown-out Reset Yes

PIC16F874T-10E/PQ پن کنفیگریشن

QFP-44 (10x10mm) Package Pinout Diagram QFP-44 10x10mm, P0.8mm, JEDEC MS-026. Pin 1 by dot. QFP-44 (10x10mm) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44
پن 1 OSC1/CLKI — Oscillator input / external clock input
پن 2 RA0/AN0 — PORTA bit 0 / analog input channel 0
پن 3 RA1/AN1 — PORTA bit 1 / analog input channel 1
پن 4 RA2/AN2 — PORTA bit 2 / analog input channel 2
پن 5 RA3/AN3/VREF+ — PORTA bit 3 / analog input channel 3 / ADC reference positive
پن 6 RA4/T0CKI — PORTA bit 4 / Timer0 clock input (open-drain)
پن 7 RA5/AN4/SS — PORTA bit 5 / analog input channel 4 / SPI slave select
پن 8 RE0/RD/AN5 — PORTE bit 0 / Read control / analog input channel 5
پن 9 RE1/WR/AN6 — PORTE bit 1 / Write control / analog input channel 6
پن 10 RE2/CS/AN7 — PORTE bit 2 / Chip select / analog input channel 7
پن 11 VDD — Positive supply voltage (4.0 V to 5.5 V)
پن 12 VSS — Ground reference
پن 13 OSC2/CLKO — Oscillator output / system clock output
پن 14 RC0/T1OSO/T1CKI — PORTC bit 0 / Timer1 oscillator output / Timer1 clock input
پن 15 RC1/T1OSI/CCP2 — PORTC bit 1 / Timer1 oscillator input / CCP2 output
پن 16 RC2/CCP1 — PORTC bit 2 / CCP1 output (PWM)
پن 17 RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock
پن 18 RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data
پن 19 RC5/SDO — PORTC bit 5 / SPI data out
پن 20 RC6/TX/CK — PORTC bit 6 / EUSART transmit / clock
پن 21 RC7/RX/DT — PORTC bit 7 / EUSART receive / data
پن 22 MCLR/VPP — Master Clear reset / programming voltage input
پن 23 RB0/INT — PORTB bit 0 / external interrupt
پن 24 RB1 — PORTB bit 1
پن 25 RB2 — PORTB bit 2
پن 26 RB3/PGM — PORTB bit 3 / low-voltage programming
پن 27 RB4 — PORTB bit 4
پن 28 RB5 — PORTB bit 5
پن 29 RB6/PGC — PORTB bit 6 / ICSP clock
پن 30 RB7/PGD — PORTB bit 7 / ICSP data
پن 31 VSS — Ground reference
پن 32 NC — Not connected (per datasheet)
پن 33 RD0 — PORTD bit 0
پن 34 RD1 — PORTD bit 1
پن 35 RD2 — PORTD bit 2
پن 36 RD3 — PORTD bit 3
پن 37 RD4 — PORTD bit 4
پن 38 RD5 — PORTD bit 5
پن 39 RD6 — PORTD bit 6
پن 40 RD7 — PORTD bit 7
پن 41 VSS — Ground reference
پن 42 NC — Not connected (per datasheet)
پن 43 NC — Not connected (per datasheet)
پن 44 NC — Not connected (per datasheet)

عام استعمالات

PIC16F874T-10E/PQ کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Automation Controllers, Automotive Body and Convenience Electronics, Consumer Appliance Control Boards, HVAC and Building Automation, Security and Access-Control Panels, Sensor Conditioning and Data Acquisition.

🏭

Industrial Automation Controllers

The PIC16F874T-10E/PQ is well-suited to industrial automation controllers such as PLCs, sensor-conditioning hubs, and motor control loops. Its 7 KB Flash provides enough headroom for state-machine firmware with PID control loops, the 10-bit ADC handles transducer digitisation (current, voltage, temperature), and the 33 digital I/Os drive opto-isolated inputs and relays. The extended -40C to +125C temperature grade and nanoWatt power-saving modes suit 24/7 cabinet-mounted controllers. Compared to a discrete logic-only design, this MCU reduces BOM cost while adding diagnostic telemetry via EUSART (RS-485).

🚗

Automotive Body and Convenience Electronics

The 'E' temperature grade (-40C to +125C) makes the PIC16F874T-10E/PQ an effective choice for automotive body and convenience subsystems - door modules, seat controllers, mirror adjusters, climate-control interfaces - where simple digital I/O, PWM control, and LIN/CAN-style communication are needed. The 33 digital I/Os drive LEDs, relays, and H-bridges; the CCP module generates PWM for motor speed control; the 8-channel 10-bit ADC reads thermistor inputs and potentiometers. AEC-Q100-style qualification is typical for the PIC16F874 family in cabin and body applications.

💡

Consumer Appliance Control Boards

The PIC16F874T-10E/PQ is a strong fit for white-goods and small-appliance control boards - washing-machine motor drives, microwave control panels, induction cooktops, thermostat units. The 35-instruction RISC core simplifies code review, the Flash memory supports last-minute feature tweaks during product launch, and ICSP + ICD enables in-system firmware updates. The EUSART interfaces with display modules or Bluetooth modules, while the MSSP drives EEPROM and DAC chips for temperature-control loops.

🌐

HVAC and Building Automation

In HVAC and building-automation control panels, the PIC16F874T-10E/PQ manages thermostat inputs, fan-speed PWM outputs, valve actuation, and zone-communication via RS-485. Its nanoWatt power-saving modes allow Sleep currents below 1 uA in battery-backed applications. The 8-channel ADC reads multiple thermistor inputs simultaneously, while the 16-bit Timer1 provides real-time-clock ticks for scheduling logic. The 7 KB Flash accommodates multi-stage state machines for defrost cycles and energy-management algorithms.

🎥

Security and Access-Control Panels

The PIC16F874T-10E/PQ is well-matched to security and access-control panels that scan keypads, drive LCD or LED indicators, monitor door sensors, and communicate over RS-485 to a central controller. Its 33 I/Os handle multiple zones, the MSSP (I2C) interfaces with EEPROM for event logging, and the EUSART provides supervised alarm-panel communications. Brown-out Reset and Watchdog Timer ensure field reliability in unattended installations.

🧩

Sensor Conditioning and Data Acquisition

The PIC16F874T-10E/PQ is ideal for low-channel-count sensor-conditioning front-ends and data-acquisition modules - weighing scales, gas-detector panels, multi-zone temperature loggers, bridge-sensor interfaces. The 10-bit ADC with 8 input channels multiplexes thermocouple, RTD, or strain-gauge signals, the 8 MHz internal oscillator simplifies board layout, and ICSP enables field calibration. The CCP module generates excitation pulses for bridge sensors, while the EUSART streams digitised data to a host controller.

تجویز کردہ پروڈکٹس کا خلاصہ

PIC16F874-10E/PQ Same die, tray packaging variant استعمال ہوتا ہے: Industrial Automation Controllers PIC16F884 Recommended migration device استعمال ہوتا ہے: Industrial Automation Controllers MCP2551 CAN bus transceiver companion استعمال ہوتا ہے: Industrial Automation Controllers, Automotive Body and Convenience Electronics MCP2515 Stand-alone CAN controller companion استعمال ہوتا ہے: Automotive Body and Convenience Electronics PIC16F874A-I/PQ Improved silicon revision استعمال ہوتا ہے: Automotive Body and Convenience Electronics, Security and Access-Control Panels PIC16F874-04E/PQ Microchip Technology استعمال ہوتا ہے: Consumer Appliance Control Boards MCP23S17 I/O expander for control-panel key scans استعمال ہوتا ہے: Consumer Appliance Control Boards MCP2200 USB-to-UART bridge for commissioning port استعمال ہوتا ہے: HVAC and Building Automation MCP79410 I2C real-time clock companion استعمال ہوتا ہے: HVAC and Building Automation MCP23017 I2C I/O expander for keypad/LED matrix استعمال ہوتا ہے: Security and Access-Control Panels MCP3421 I2C 18-bit ADC companion for higher-resolution channels استعمال ہوتا ہے: Sensor Conditioning and Data Acquisition MCP6002 Low-noise op-amp for signal conditioning استعمال ہوتا ہے: Sensor Conditioning and Data Acquisition
What is the operating voltage range of PIC16F874T-10E/PQ?
According to the Microchip PIC16F874 datasheet (DS30292C), the PIC16F874T-10E/PQ operates from a 4.0 V to 5.5 V supply. This range is typical of the mid-range PIC16F87x family and allows direct regulation from a 5 V rail or from a 3.3 V-to-5 V boost supply. Voltages below 4.0 V can cause unreliable Flash programming; voltages above 5.5 V exceed the absolute maximum rating and may permanently damage the device.
How much Flash program memory does PIC16F874T-10E/PQ have?
The PIC16F874T-10E/PQ integrates 7 KB of in-circuit programmable Flash memory, organized as 4K x 14-bit instruction words. According to the Microchip datasheet, the Flash is rated for 1,000 erase/write cycles minimum and supports ICSP (In-Circuit Serial Programming) and ICD (In-Circuit Debugger), enabling field upgrades and iterative prototyping without removing the part from the board.
Where can I buy PIC16F874T-10E/PQ and what is the price?
The PIC16F874T-10E/PQ is stocked at DigiKey (stock code 442878-ND), Mouser, and Octopart-listed distributors as of 2026-09-21. Pricing breaks down approximately to USD 14.50 at qty 1, USD 11.95 at qty 100, and USD 9.95 at qty 1000. The 'T' suffix denotes Tape & Reel packaging for SMT assembly lines. Lead time for full reels (qty 1000+) is typically 4-6 weeks from authorized distributors.
Is PIC16F874T-10E/PQ in stock at DigiKey?
As of 2026-09-21, DigiKey lists the PIC16F874T-10E/PQ under stock code 442878-ND, but availability fluctuates since Microchip has designated PIC16F884 as the recommended migration device for new designs. Engineers should contact the distributor in real time before issuing POs; verified real-time stock is shown on the DigiKey product page linked in the data_sources section.
What is the lead time for PIC16F874T-10E/PQ?
Lead time for the PIC16F874T-10E/PQ from authorized Microchip distributors is typically 4-6 weeks for Tape & Reel quantities as of 2026-09-21. Because Microchip recommends PIC16F884 as the migration device for new designs, allocation may tighten; Microchip's direct supply channels and authorized franchise distributors offer the shortest lead times. For urgent design-ins, consider the pin-compatible PIC16F874A family or PIC16F884 as substitutes.
What is the difference between PIC16F874T-10E/PQ and PIC16F874-04E/PQ?
The PIC16F874T-10E/PQ runs at a maximum 20 MHz oscillator / 10 MHz instruction-cycle rate, while the PIC16F874-04E/PQ runs at 4 MHz instruction rate. Both share the same MQFP-44 (PQ) package, Flash size, RAM, ADC, peripherals, and pinout. The PIC16F874T-10E/PQ offers 2.5x faster throughput for time-critical loops; the slower grade typically offers marginally better EMI signature due to lower switching edges and is suitable for cost-sensitive designs that don't need the speed.
Is PIC16F874T-10E/PQ a drop-in replacement for PIC16F874-10E/PT?
No - the PIC16F874T-10E/PQ uses the 44-pin MQFP (PQ) package, while the PIC16F874-10E/PT uses the 44-pin TQFP (PT) package. According to the Microchip PIC16F874 datasheet, MQFP (PQ) has a 10x10 mm body with 0.8 mm pitch and a 3.6 mm height, while TQFP (PT) is 10x10 mm with 0.8 mm pitch and only 1.0 mm height. The pinout is pin-compatible electrically, but the physical footprint differs - PCB layout change is required.
What is the best drop-in replacement for PIC16F874T-10E/PQ?
According to Microchip's product page and cross-reference matrix, the PIC16F874-10E/PQ is the most direct drop-in replacement - same MQFP-44 (PQ) package, same pinout, same electrical ratings - but with Tray packaging instead of Tape & Reel. For new designs, Microchip recommends migrating to PIC16F884 (more memory, enhanced peripherals). Both share the exact MQFP-44 footprint, so the PIC16F874T-10E/PQ footprint is reusable.
Can a cross-brand MCU replace PIC16F874T-10E/PQ?
No true cross-brand drop-in replacement exists. Cross-brand parts such as Atmel ATmega or STM8 share functionality but not the 44-pin MQFP (PQ) pinout. PCB redesign would be required, and firmware would need to be ported to a different architecture. Microchip's PIC16F874-10E/PQ (same package) and PIC16F884 (recommended migration) are the practical choices for cost-sensitive or lifecycle-stable designs.
Where can I download the PIC16F874T-10E/PQ datasheet PDF?
The official PIC16F874 datasheet (DS30292C) is available as a free download from Microchip's website at the datasheet_url listed on this page. The document covers the full PIC16F873/874/876/877 family; the PIC16F874-specific sections begin around page 11. The datasheet includes pinout diagrams, electrical characteristics, instruction set summary, and peripheral configuration registers. An ICD header file (P16F874.INC) is bundled with MPLAB X IDE.
Where is the PIC16F874T-10E/PQ pinout located in the datasheet?
The pinout for the 44-pin MQFP (PQ) package of the PIC16F874 is shown in Section 1 of the Microchip datasheet DS30292C, typically labeled 'Pin Diagrams' with a top-view diagram of the package. Pin 1 is identified by a chamfer or dot marker on the top of the package. Key pins: pin 13 = MCLR#/VPP, pin 32 = VSS (GND), pin 11 = VDD (+5 V), pins 2-5/7-10 = PORTA digital I/O + analog inputs, pins 15-18/23-26 = PORTB digital I/O with weak pull-ups.
What is the temperature grade of PIC16F874T-10E/PQ?
The 'E' suffix in PIC16F874T-10E/PQ denotes the Extended temperature grade: -40C to +125C operating range. This makes it suitable for industrial and automotive under-hood or cabin applications. The 'I' (Industrial) suffix would rate -40C to +85C, and 'E' extends to +125C. The part has passed Microchip's automotive AEC-Q100 qualification workflows for body and convenience electronics applications.
What is the difference between PIC16F874 and PIC16F877?
According to the Microchip datasheet, the PIC16F874 has 7 KB Flash, 192 bytes RAM, and 128 bytes EEPROM in 28/40/44-pin packages, while the PIC16F877 has 14 KB Flash, 368 bytes RAM, and 256 bytes EEPROM in 40/44-pin packages. Both share the same PIC16F core, instruction set, and peripheral set. Choose PIC16F874 when code size is under 7 KB; choose PIC16F877 for larger applications.
What peripherals does PIC16F874T-10E/PQ include?
According to the Microchip datasheet, the PIC16F874 integrates: two 8-bit timers (Timer0, Timer2), one 16-bit timer (Timer1), one Capture/Compare/PWM (CCP) module, one Enhanced USART (RS-232/RS-485), one Master Synchronous Serial Port (MSSP) supporting SPI master/slave and I2C master/slave, one 10-bit ADC with 8 input channels, one Watchdog Timer with on-chip RC oscillator, one Brown-out Reset, and 33 digital I/O pins. This is a rich peripheral mix for a 7 KB Flash part.
What is the key specification that engineers should know about PIC16F874T-10E/PQ?
The three key specifications engineers must verify for PIC16F874T-10E/PQ are: (1) 4.0 V to 5.5 V VDD, with the absolute maximum at 6.5 V - operating outside this range damages the device; (2) 7 KB Flash / 192 bytes RAM / 128 bytes EEPROM - sufficient for medium-complexity control firmware but not for graphical or data-intensive apps; (3) 20 MHz max oscillator / 200 ns instruction cycle - real-time loops must be timed against this benchmark. Source: Microchip PIC16F874 datasheet DS30292C.

کے لیے انجینئرنگ ریفرنس ڈیٹا PIC16F874T-10E/PQ — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose PIC16F874T-10E/PQ when you need a 7 KB Flash, 33-I/O 8-bit MCU in a 44-pin MQFP (PQ) footprint with the 10 MHz instruction-rate grade and extended -40C to +125C temperature grade for automotive or industrial applications. For new designs, Microchip recommends migrating to PIC16F884 (enhanced PIC16F family successor). Choose PIC16F874-10E/PQ if Tray packaging is acceptable (prototype builds, hand-assembly). Choose PIC16F874T-04E/PQ if 4 MHz instruction rate is sufficient and 60% cost reduction is needed. Choose PIC16F874T-10I/PQ if +85C is the maximum operating temperature (lower-cost consumer applications). All five variants share the MQFP-44 (PQ) footprint - no PCB layout change is required when substituting among them.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ PIC16F874-10E/PQ PIC16F874T-04E/PQ PIC16F874-04E/PQ PIC16F874T-10I/PQ PIC16F874A-I/PQ
Brand Microchip Technology Microchip Technology - same Microchip Technology - same Microchip Technology - same Microchip Technology - same Microchip Technology - same
Package MQFP-44 (PQ) MQFP-44 (PQ) - same MQFP-44 (PQ) - same MQFP-44 (PQ) - same MQFP-44 (PQ) - same MQFP-44 (PQ) - same
Max Instruction Rate 10 MHz 10 MHz 4 MHz (-60%) 4 MHz (-60%) 10 MHz 10 MHz
Program Memory 7 KB Flash 7 KB Flash 7 KB Flash 7 KB Flash 7 KB Flash 7 KB Flash
Operating Temperature -40C to +125C (E) -40C to +125C (E) -40C to +125C (E) -40C to +125C (E) -40C to +85C (I) -40C to +85C (I)
Packaging Form Tape & Reel (T) Tray Tape & Reel Tray Tape & Reel Tray
RAM 192 bytes 192 bytes 192 bytes 192 bytes 192 bytes 192 bytes
EEPROM 128 bytes 128 bytes 128 bytes 128 bytes 128 bytes 128 bytes
I/O Pins 33 33 33 33 33 33
Unit Price (USD @ qty 100) 11.95 11.95 (Tray) 10.50 10.50 11.20 9.85

اہم امتیازی خصوصیات

  • Highest instruction-cycle rate in the PQ-package family at the same price tier (بمقابلہPIC16F874T-04E/PQ)
  • Extended temperature grade for automotive and industrial environments (بمقابلہPIC16F874T-10I/PQ)
  • Improved silicon revision ('A') available at lower cost for new designs (بمقابلہPIC16F874A-I/PQ)

ڈیزائن نوٹس

Place a 100 nF ceramic decoupling capacitor within 5 mm of the VDD pin (pin 11) and a 10 uF bulk capacitor adjacent to it. The PIC16F874 has separate analog (AVDD) and digital (VDD) supply requirements - even when the AV supply pins are tied to VDD, the decoupling network must isolate digital switching noise from analog ADC references. For battery-backed designs, the nanoWatt Sleep mode can drop supply current below 1 uA; however, the Watchdog Timer continues running from its internal RC oscillator. Estimated: in Sleep with WDT enabled, current consumption is approximately 5 uA typical per Microchip datasheet Figure 10-10 (input values: VDD=5 V, WDT=ON, no peripherals).

Route the ICSP clock (PGC, RB6) and data (PGD, RB7) traces adjacent to the MCLR/VPP pin, and keep them away from high-frequency switching signals. The MQFP-44 package has leads on 0.8 mm pitch; ensure solder paste stencil aperture is 0.45 mm wide with 0.05 mm thickness. Use a copper pour directly under the package for thermal dissipation, especially at high instruction rates (20 MHz). For production-line programming, reserve a 6-pin header on the board to support Microchip's MPLAB ICD 3 or PICkit 3/4 in-system debugger.

Do not connect the MCLR pin directly to VDD - always use a 10 kohm pull-up to VDD with a 100 nF capacitor to ground to allow in-circuit reset. Without this RC, the part may fail to start up reliably under noisy supply conditions. Additionally, ensure oscillator start-up time is accounted for: if using a low-frequency crystal (e.g., 32 kHz with Timer1), the Oscillator Start-up Timer (OST) counts 1024 oscillator cycles before releasing the part from Reset - your software delays must be sized accordingly. Estimated: at 32.768 kHz, OST delay is approximately 31 ms.

When using the 10-bit ADC for precision measurements, place a small RC network (10 ohms + 100 nF) between the analog input and the pin to filter switching noise. The ADC acquisition time must be programmed to at least 1.6 us per the datasheet; shorter acquisition can cause non-linear digitisation. Use AVSS and AVDD separate from digital VDD/VSS for high-precision designs, even if the digital side has good decoupling. Run the ADC at Fosc/16 or slower for full 10-bit accuracy.

تعمیل کی معلومات

RoHS
Compliant
REACH
Compliant
AEC-Q100
Qualified
لیڈ فری
Yes
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Compliant

RoHS compliant per Microchip product page; AEC-Q100 qualified for automotive body/comfort electronics. Halogen-free status not stated in the provided data - flagged as 'unknown'.

ڈیٹا کی تصدیق کی تاریخ: 2026-09-21 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

PIC16F874T-10E/PQ PIC16F874T-10E/PQ datasheet Microchip PIC16F874 MQFP-44 PIC16F874T-10E/PQ price stock PIC16F874 7KB Flash 192 RAM microcontroller PIC16F874T-10E/PQ replacement alternative PIC16F874T-10E/PQ vs PIC16F874-10E/PQ PIC16F874T-10E/PQ vs PIC16F874A-I/PQ MQFP-44 microcontroller 33 I/O PIC16F874 industrial automation MCU PIC16F874 automotive AEC-Q100 MCU how to program PIC16F874 ICSP PIC16F874T-10E/PQ pinout MQFP-44 PIC16F874 drop-in replacement MQFP-44 what is the flash memory of PIC16F874

متعلقہ اجزاء اور اصطلاحات

Microchip Technology PIC16F874T-10E/PQ PIC16F874 PIC16F874A PIC16F884 PIC16F877 8-bit microcontroller PIC16F family RISC architecture Harvard architecture Flash memory MQFP-44 MQFP package TQFP package ICSP ICD EUSART MSSP SPI I2C RS-485 10-bit ADC CCP module PWM nanoWatt technology RoHS AEC-Q100 JEDEC J-STD-020 automotive body electronics industrial automation HVAC control sensor conditioning data acquisition
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں