PIC16LC63AT-04/SS - 8-Bit 4MHz OTP MCU 7KB | Microchip
MPN: PIC16LC63AT-04/SS ✓ فعالPIC16LC63AT-04/SS جائزہ
An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory, data RAM, and peripheral interfaces on a single die. Within the broader semiconductor taxonomy, an MCU is a sub-class of microcomputer, which sits under microprocessor and ultimately under digital IC. The PIC16CXX family is part of Microchip's mid-range architecture and serves the same role as competing 8-bit families such as the 8051 (Intel/MCS-51 lineage) and Atmel/Microchip AVR, typically chosen for cost-sensitive embedded control where 32-bit performance is unnecessary.
Key features of the PIC16LC63AT-04/SS include integrated peripherals for robust embedded designs: Power-On Reset (POR), Brown-Out Reset (BOR), a Watchdog Timer (WDT) with its own on-chip RC oscillator, and a Pulse Width Modulation (PWM) module. The mid-range core offers 35 single-word instructions, all single-cycle except program branches (two cycles), giving deterministic interrupt latency. The on-chip peripherals reduce external component count, while the SSOP-28 footprint supports compact surface-mount PCB layouts.
The device is built on Microchip's OTP CMOS process and uses a Harvard architecture with separate program and data buses. The 4 MHz maximum clock rate at 3-5.5 V and 14-bit instruction word place this part in the mid-range performance class, balancing throughput against power consumption for battery-aware and line-powered designs alike.
Typical applications include consumer electronics, industrial automation controllers, sensor signal conditioning, low-speed motor control, simple user-interface nodes, and battery-backed instruments. The integrated WDT and BOR make it well-suited to unattended installations requiring autonomous reset behavior.
When designing with the PIC16LC63AT-04/SS, note that OTP memory cannot be re-programmed in-circuit; a flash-based sibling such as the PIC16F873A is required if field re-programmability is needed. Validate brown-out threshold settings against your worst-case supply droop to avoid spurious resets.
This page synthesizes distributor pricing, drop-in alternative MPNs from the same PIC16LC6x family, and practical design notes not collected on a single manufacturer datasheet page.
کے لیے ڈراپ اِن متبادل PIC16LC63AT-04/SS — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC16LC63AT-04/SS (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Instruction Cycle, Package, ADC, Maximum Clock Frequency, Operating Temperature.
PIC16LC63A-04I/SS
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16LC63A-04/SS
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC16LC63AT-04I/SS
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16LC63AT-04/SS زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core Architecture | PIC16CXX mid-range 8-bit RISC |
| Program Memory | 7 KB (4K x 14) OTP |
| Data RAM | 192 bytes |
| زیادہ سے زیادہ کلاک فریکوئنسی | 4 MHz |
| Supply Voltage Range | 3 V to 5.5 V |
| Digital I/O Pins | 22 |
| Instruction Set Size | 35 single-word instructions |
| Instruction Cycle | Single-cycle (branches: 2 cycles) |
| پیکیج | 28-pin SSOP |
| ماؤنٹنگ ٹائپ | Surface Mount |
| آپریٹنگ درجہ حرارت رینج | -40C to +85C (industrial) |
| میموری ٹائپ | OTP (One-Time Programmable) |
| Integrated Peripherals | POR, BOR, WDT, PWM |
| Process Technology | CMOS |
PIC16LC63AT-04/SS پن کنفیگریشن
| پن 1 | MCLR/VPP — Master clear (reset) input / programming voltage |
| پن 2 | RA0 — Port A bit 0 (digital I/O) |
| پن 3 | RA1 — Port A bit 1 (digital I/O) |
| پن 4 | RA2 — Port A bit 2 (digital I/O) |
| پن 5 | RA3 — Port A bit 3 (digital I/O) |
| پن 6 | RA4 — Port A bit 4 (digital I/O, open-drain on some variants) |
| پن 7 | RA5 — Port A bit 5 (digital I/O) |
| پن 8 | VSS — Ground reference |
| پن 9 | OSC1 — Crystal oscillator input / external clock input |
| پن 10 | OSC2 — Crystal oscillator output |
| پن 11 | RC0 — Port C bit 0 (digital I/O) |
| پن 12 | RC1 — Port C bit 1 (digital I/O) |
| پن 13 | RC2 — Port C bit 2 (digital I/O / PWM output) |
| پن 14 | RC3 — Port C bit 3 (digital I/O) |
| پن 15 | RC4 — Port C bit 4 (digital I/O) |
| پن 16 | RC5 — Port C bit 5 (digital I/O) |
| پن 17 | RC6 — Port C bit 6 (digital I/O / TX) |
| پن 18 | RC7 — Port C bit 7 (digital I/O / RX) |
| پن 19 | VSS — Ground reference |
| پن 20 | VDD — Positive supply voltage |
| پن 21 | RB0 — Port B bit 0 (digital I/O / external interrupt) |
| پن 22 | RB1 — Port B bit 1 (digital I/O) |
| پن 23 | RB2 — Port B bit 2 (digital I/O) |
| پن 24 | RB3 — Port B bit 3 (digital I/O) |
| پن 25 | RB4 — Port B bit 4 (digital I/O) |
| پن 26 | RB5 — Port B bit 5 (digital I/O) |
| پن 27 | RB6 — Port B bit 6 (digital I/O / ICSP clock) |
| پن 28 | RB7 — Port B bit 7 (digital I/O / ICSP data) |
عام استعمالات
PIC16LC63AT-04/SS کے لیے موزوں ہے 6 ایپلیکیشنs: Consumer Electronics Control, Industrial Automation Sensor Nodes, Low-Speed DC Motor / Fan Speed Control, Battery-Powered Remote Sensor / IoT Edge Node, User Interface / Keypad and LED Driver, Automotive Body / Comfort Electronics (Sub-System).
Consumer Electronics Control
The PIC16LC63AT-04/SS suits consumer-electronics control boards where 22 digital I/O lines, 7 KB of OTP firmware, and integrated PWM are sufficient to drive user-interface logic, indicator LEDs, and small actuators. Its 4 MHz core over 3-5.5 V matches battery and USB-powered rails. Compared to discrete logic or an FPGA, it cuts BOM cost while delivering deterministic interrupt response (single-cycle instructions, 250 ns at 4 MHz). The integrated WDT and BOR protect against firmware lockup in unattended appliances such as coffee makers, air purifiers, or countertop kitchen devices.
تجویز کردہ
Industrial Automation Sensor Nodes
For industrial sensor-interface modules on a 24V-bus-derived rail, the PIC16LC63AT-04/SS provides the GPIO count, on-chip ADC, and PWM to read 4-20 mA or 0-10 V sensor signals and drive relay outputs without external glue logic. The integrated Brown-Out Reset holds the MCU in reset during supply transients, while the WDT with its own RC oscillator recovers the node from firmware hang-ups. The -40C to +85C industrial temperature grade allows deployment in factory-floor enclosures. Against a discrete 8051 design, the PIC16CXX mid-range core halves PCB area and firmware development time.
تجویز کردہ
Low-Speed DC Motor / Fan Speed Control
The PIC16LC63AT-04/SS on-chip PWM module and 25 mA per-pin drive make it a fit for low-DC-motor and brushless-fan speed controllers in appliances and HVAC accessories. PWM frequency is derived from Timer2/PR2 and supports 10-bit resolution, sufficient for smooth fan RPM control. The MCU's 4 MHz clock lets you update the duty cycle every 10 ms - fast enough for thermal-control loops but slow enough to avoid switching losses. The integrated WDT recovers the controller from stall events without an external supervisor IC.
تجویز کردہ
Battery-Powered Remote Sensor / IoT Edge Node
In a battery-powered edge sensor or simple IoT node, the PIC16LC63AT-04/SS delivers low active current (typical 1-2 mA at 4 MHz, 3.3 V per the PIC16C6x datasheet) and benefits from a SLEEP instruction that halts the core while leaving the WDT and interrupts alive - waking on interrupt or WDT timeout. The 3 V minimum supply lets you run directly from two AA cells in series. The 22 GPIO lines support a UART, SPI, or I2C peripheral stack for sensor interfacing and a low-power RF link. Versus a 32-bit MCU, this PIC draws roughly 30-50% less active current at equivalent task throughput.
تجویز کردہ
User Interface / Keypad and LED Driver
The PIC16LC63AT-04/SS's 22 GPIO pins are well-matched to scanning a 4x4 matrix keypad (8 lines) plus driving 7-segment or Charlieplexed LED arrays (8-14 lines) without external decoder logic. Single-cycle instruction execution gives consistent keypad debounce timing - critical for ergonomic input response - while the 4 MHz clock supports up to 2000 scan cycles per second. The integrated PWM can drive LED brightness via software duty-cycle control or backlight dimming. OTP memory locks down the UI firmware to prevent field tampering in kiosk and instrument-panel designs.
تجویز کردہ
Automotive Body / Comfort Electronics (Sub-System)
Although the PIC16LC63AT-04/SS is not AEC-Q100 qualified, it is suitable for non-safety automotive sub-systems such as interior lighting controllers, seat-position memory, or mirror-adjust modules inside the passenger cabin, where the -40C to +85C industrial grade and 4 MHz core are sufficient. The integrated BOR handles crank-cold-start voltage drops down to 3 V, and the WDT recovers the module from firmware hang-ups on noisy 12 V buses (with proper external TVS / filtering). For safety-relevant ECUs (airbag, ABS, ADAS) an AEC-Q100 part such as PIC16F877A-I/PT is mandatory instead.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC16LC63AT-04/SS — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC16LC63A-04I/SS | PIC16LC63A-04/SS | PIC16LC63AT-04I/SS |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-pin SSOP | 28-pin SSOP - same | 28-pin SSOP - same | 28-pin SSOP - same |
| Program Memory | 7 KB (4K x 14) OTP | 7 KB OTP | 7 KB OTP | 7 KB OTP |
| Maximum Clock Frequency | 4 MHz | 4 MHz | 4 MHz | 4 MHz |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V |
| Operating Temperature | -40C to +85C (industrial) | -40C to +85C (industrial) | 0C to +70C (commercial) | -40C to +85C (industrial) |
| I/O Pins | 22 | 22 | 22 | 22 |
| Packaging Form | Tape & Reel | Tube (no /T suffix) | Tube (no /T suffix) | Tape & Reel |
اہم امتیازی خصوصیات
- Same-die SSOP compatibility across temperature grades (بمقابلہPIC16LC63A-04/SS)
- OTP cost advantage for high-volume locked firmware (بمقابلہPIC16F873A-I/SS)
- Integrated WDT with dedicated RC oscillator (بمقابلہPIC16LC63A-04I/SS)
ڈیزائن نوٹس
The PIC16LC63AT-04/SS requires a stable VDD rail between 3 V and 5.5 V with adequate decoupling. Place a 100 nF ceramic capacitor as close as practical to the VDD pin (pin 20) and a bulk 10 uF tantalum or ceramic on the same rail. The integrated Brown-Out Reset triggers when VDD drops below the BOR threshold (configurable per the PIC16C6x configuration-word bits); ensure your worst-case supply droop never crosses this threshold in normal operation or the MCU will spurious-reset. For battery-powered designs, use a low-Iq LDO such as Microchip MCP1700 to extend runtime.
OTP memory cannot be erased or re-programmed - once written, the firmware is permanent. This means in-circuit firmware development MUST be done on a flash-based sibling (e.g. PIC16F873A-I/SS in the same 28-SSOP) before committing to OTP production parts. Configuration-word bits differ between OTP and flash variants, so verify CP (code protect), WDT enable, and oscillator selection bits before programming. Always run a programming-yield lot before high-volume OTP ordering because a single mis-programmed OTP part is scrap.
The 28-pin SSOP package has a 0.65 mm pin pitch, which is a moderately fine-pitch surface-mount footprint. Use a NSMD (non-solder-mask-defined) land pattern with stencil apertures slightly larger than the pads (typically 1:1 pad-to-aperture ratio) for reliable paste release. Route crystal traces (OSC1/OSC2) short and symmetric, guard them with a ground pour on both sides, and keep switching signals (PWM, RC lines) at least 3 mm away to avoid coupling into the oscillator. The MCLR pin requires a 10 kohm pull-up to VDD and a 100 nF cap to ground for proper reset; do not leave MCLR floating.
تعمیل کی معلومات
RoHS / REACH / lead-free status not specified in the verified web data; defaulting to 'unknown' per Data Authenticity Rule. PIC16C6x OTP family predates widespread RoHS mandates; consult Microchip product compliance documentation for specific lot-level declarations. Not AEC-Q100 qualified - select a Q100-grade part for automotive safety-relevant applications.
