PIC16LCE623-04E/P - 8-Bit 4MHz OTP MCU 896B | Microchip
MPN: PIC16LCE623-04E/P ✗ اختتامِ زندگیPIC16LCE623-04E/P جائزہ
An 8-bit microcontroller (MCU) is a small computer-on-a-chip containing a CPU, program memory, RAM, and peripherals designed for embedded control tasks. PIC microcontrollers use a Harvard RISC architecture that executes most instructions in a single cycle (200 ns at 20 MHz), simplifying deterministic real-time firmware development. The PIC16C family sits within Microchip's hierarchy of 8-bit MCU -> microcontroller -> embedded processor -> semiconductor, and the PIC16CE623 specifically targets low-voltage (LC suffix) applications requiring EPROM-style OTP programming at reduced cost.
Key features include 35 single-cycle instructions (except two-cycle branches), 4 MHz maximum clock input (200 ns instruction cycle), wide 2.5 V to 5.5 V supply range for battery-friendly operation, and 13 digital I/O pins. The external oscillator interface supports crystals, resonators, or external clock sources up to 4 MHz. OTP memory provides one-time field programmability at production-time cost below flash-based parts.
The architecture combines a RISC CPU core with dedicated peripheral registers, an 8-bit ALU, and a hardware multiplier-less instruction set optimized for byte and bit manipulation. The 512 x 14 program word size accommodates 14-bit opcodes, which is standard for mid-range PIC16 devices. Power management is handled by oscillator selection (LP/XT/HS modes) and sleep mode with wake-up on pin change or watchdog timeout.
Typical applications include low-power embedded control, battery-powered sensor interfaces, simple motor control loops, appliance front-panel controllers, and consumer electronics requiring small-form-factor 8-bit processing. The PIC16LCE623 family is well documented in legacy designs, hobbyist projects, and educational kits where 8-bit simplicity outweighs the need for larger flash and modern peripherals.
When designing with this device, note that OTP memory cannot be erased or rewritten; production programming must be error-free. For engineering samples or development cycles, consider the flash-based PIC16F630 family as a pin-compatible substitute. Industrial temperature grade (E suffix) supports -40C to +125C operation.
This page synthesizes distributor pricing, parametric comparisons, drop-in alternatives, and practical design guidance not consolidated on a single manufacturer datasheet page, supporting faster procurement and design-in decisions.
کے لیے ڈراپ اِن متبادل PIC16LCE623-04E/P — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC16LCE623-04E/P (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Program Memory Size, Program Memory Type, Instruction Cycle Time, Package, Maximum Clock Frequency.
PIC16LCE623-04/P
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F630-I/P
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16LC620A-04/P
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16LC621A-04/P
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC16LC622-04/P
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC16LCE623-04E/P زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core | PIC 8-bit RISC (mid-range PIC16) |
| Program Memory Type | OTP (One-Time Programmable) |
| Program Memory Size | 896 B (512 x 14 words) |
| RAM Size | 96 x 8 bytes |
| EEPROM Size | 128 x 8 bytes |
| زیادہ سے زیادہ کلاک فریکوئنسی | 4 MHz |
| Instruction Cycle Time | 200 ns (single cycle, except branches) |
| Number of I/O Pins | 13 |
| Supply Voltage Range | 2.5 V to 5.5 V |
| Oscillator Type | External |
| آپریٹنگ درجہ حرارت رینج | -40 C to +125 C (industrial, E suffix) |
| پیکیج / کیس | 18-DIP (0.300 inch, 7.62 mm) |
| ماؤنٹنگ ٹائپ | Through-Hole |
| Number of Instructions | 35 |
| ڈیٹا بس چوڑائی | 8-bit |
| Lead Free / RoHS | Compliant (per distributor listing) |
| Packaging | Tube |
PIC16LCE623-04E/P پن کنفیگریشن
| پن 1 | RA2 — Port A bit 2 / analog input |
| پن 2 | RA3 — Port A bit 3 / analog input |
| پن 3 | RA4 — Port A bit 4 / T0CKI |
| پن 4 | MCLR — Master clear / reset (active low) |
| پن 5 | VSS — Ground reference |
| پن 6 | RB0 — Port B bit 0 / INT |
| پن 7 | RB1 — Port B bit 1 |
| پن 8 | RB2 — Port B bit 2 |
| پن 9 | RB3 — Port B bit 3 |
| پن 10 | RB4 — Port B bit 4 |
| پن 11 | RB5 — Port B bit 5 |
| پن 12 | RB6 — Port B bit 6 / ICCLK |
| پن 13 | RB7 — Port B bit 7 / ICDAT |
| پن 14 | VDD — Positive supply voltage |
| پن 15 | OSC2 — Oscillator output |
| پن 16 | OSC1 — Oscillator input |
| پن 17 | RA0 — Port A bit 0 / analog input |
| پن 18 | RA1 — Port A bit 1 / analog input |
عام استعمالات
PIC16LCE623-04E/P کے لیے موزوں ہے 6 ایپلیکیشنs: Battery-Powered Sensor Interface, Industrial Appliance Controller, Consumer Electronics Remote Control, Simple Motor Speed Controller, Hobbyist / Educational MCU Kit, Security / Access Control Panel.
Battery-Powered Sensor Interface
The PIC16LCE623-04E/P fits low-power sensor nodes thanks to its 2.5 V-5.5 V supply range and 4 MHz operation. With 13 digital I/O, 96 B RAM, and 128 B EEPROM, it can interface multiple digital sensors, store calibration coefficients in EEPROM, and run periodic sleep/wake cycles. Placed near a 3 V lithium coin cell, its external low-power oscillator enables multi-year battery life. Unlike higher-MHz PIC16F parts, the LCE623 trades speed for lower dynamic current, ideal for duty-cycled environmental sensors.
تجویز کردہ
Industrial Appliance Controller
The PIC16LCE623-04E/P is well suited to industrial appliance front-panel controllers, leveraging its -40 C to +125 C industrial temperature range and 18-PDIP through-hole package for harsh-environment mounting. With 896 B OTP memory and 13 I/O pins, it can drive LED indicators, read keypad matrices, and control relays or triacs. The PIC16C architecture's deterministic 200 ns instruction cycle ensures predictable timing for motor-control state machines. Consider the flash-based PIC16F630 family for new designs requiring firmware updates.
تجویز کردہ
Consumer Electronics Remote Control
The PIC16LCE623-04E/P supports compact IR/RF remote control designs with its 2.5 V-5.5 V supply range compatible with two AAA cells, 8-bit RISC core for low-latency button scanning, and 13 I/O pins sufficient for matrix keypads and status LEDs. The OTP memory provides low unit cost for high-volume consumer products where firmware is fixed. Its external oscillator interface supports 32-768 kHz watch crystals for ultra-low standby current, enabling months of standby battery life in handheld remotes.
تجویز کردہ
Simple Motor Speed Controller
The PIC16LCE623-04E/P can drive brushed DC motor speed control via PWM using its CCP module and external oscillator input for deterministic switching frequencies. With 13 I/O, multiple control signals (direction, brake, enable) and tachometer feedback are accommodated, while the 18-PDIP package handles moderate thermal dissipation through its leads. Compared with dedicated motor-driver ICs, the LCE623 offers flexible firmware-configurable control loops at the cost of higher CPU overhead. PIC16F630 is the recommended flash-based alternative for tuning iterations.
تجویز کردہ
Hobbyist / Educational MCU Kit
The PIC16LCE623-04E/P is widely used in educational microcontroller labs and hobby kits, owing to its simple PIC16C RISC architecture (35 instructions), 18-PDIP breadboard-friendly through-hole package, and well-documented instruction set. With 896 B OTP and 96 B RAM, students can implement timers, counters, and I/O control routines in assembly or C without the complexity of modern 32-bit MCUs. The Microchip MPLAB IDE supports the entire PIC16C family, making this part a teaching staple since the 1990s.
تجویز کردہ
Security / Access Control Panel
The PIC16LCE623-04E/P serves security panel and access control designs where OTP memory is acceptable for fixed-function firmware, 13 I/O pins are sufficient for keypad, indicator LEDs, and a magnetic-door sensor interface, and -40 C to +125 C operation supports outdoor or unconditioned environments. Its deterministic 200 ns instruction cycle ensures reliable keypad debounce and alarm-trigger response. For new security designs, the PIC16F630-I/P offers flash reprogrammability for code updates without board rework.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC16LCE623-04E/P — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC16LCE623-04/P | PIC16F630-I/P | PIC16LC620A-04/P | PIC16LC621A-04/P | PIC16LC622-04/P |
|---|---|---|---|---|---|---|
| Package | 18-PDIP (0.300 inch) | 18-PDIP (0.300 inch) - same | 18-PDIP (0.300 inch) - same | 18-PDIP (0.300 inch) - same | 18-PDIP (0.300 inch) - same | 18-PDIP (0.300 inch) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Memory Type | OTP (512 x 14) | OTP (512 x 14) - same | Flash (1K x 14) | OTP | OTP | OTP |
| Maximum Clock Frequency | 4 MHz | 4 MHz | 20 MHz | 4 MHz | 4 MHz | 4 MHz |
| Supply Voltage Range | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.0 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V |
| Operating Temperature | -40 C to +125 C (E suffix) | 0 C to +70 C (commercial) | -40 C to +85 C (I suffix) | 0 C to +70 C (commercial) | 0 C to +70 C (commercial) | 0 C to +70 C (commercial) |
| Unit Price (qty 1) | $3.20 | $3.05 (est.) | $1.95 (est.) | $3.10 (est.) | $3.10 (est.) | $3.10 (est.) |
اہم امتیازی خصوصیات
- Flash reprogrammability at half the unit cost (بمقابلہPIC16F630-I/P)
- Industrial -40 C to +125 C temperature range (بمقابلہPIC16LCE623-04/P)
- Pin-compatible with the entire PIC16LC62x family (بمقابلہPIC16LC622-04/P)
ڈیزائن نوٹس
Estimated: At VDD=3.3 V and 4 MHz oscillator, the PIC16LCE623-04E/P draws approximately 2-5 mA active (datasheet-typical). For battery operation, use sleep mode between sensor reads with wake-on-WDT or external interrupt; idle current drops to microampere levels. Place a 100 nF decoupling capacitor within 5 mm of the VDD pin and a 10 uF bulk capacitor at the supply rail to suppress switching transients.
Keep the oscillator traces (OSC1, OSC2) as short as possible and route them away from noisy digital lines; use a guard ground around the crystal to reduce EMI coupling. Place MCLR pull-up resistor (typically 10 kOhm) close to the MCLR pin to ensure clean reset. For ICSP, route RB6/ICCLK and RB7/ICDAT to a 5-pin header with VPP, VDD, GND; this enables in-circuit OTP programming without removing the device from the board.
OTP memory cannot be erased - any code error after programming is permanent. For development cycles, use the flash-based PIC16F630-I/P as a functional substitute; the production programmer must verify code checksum before committing to OTP. Note that the LCE623's analog comparator pins (RA0-RA3) double as digital I/O - configure ANSEL register bits correctly to avoid analog mode lockup. Watchdog timer must be cleared before timeout or the part resets.
The 18-PDIP package allows standard 0.1 inch (2.54 mm) pitch through-hole footprints compatible with breadboards, perfboards, and standard IC sockets. For hand-prototyping, use a machined-pin DIP socket to allow chip removal. Keep analog input traces (RA0-RA4) short and away from switching nodes to minimize ADC comparator noise. Where possible, dedicate one ground plane for the MCU with star-ground topology to noisy peripherals.
تعمیل کی معلومات
RoHS and lead-free compliance confirmed per distributor listings. AEC-Q100 not applicable (industrial-grade MCU, not automotive-qualified).
