PIC16LF15345-I/SS - 8-bit 32MHz XLP MCU, 14KB Flash | Microchip
MPN: PIC16LF15345-I/SS ✓ فعالPIC16LF15345-I/SS جائزہ
A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable peripherals. The PIC16 family is Microchip's enhanced mid-range 8-bit architecture, positioned between the baseline PIC10/12/16 and the 16-bit dsPIC families, and is widely used in cost-sensitive embedded control. The 'LF' prefix denotes the eXtreme Low-Power (XLP) variant with a 1.8V to 3.6V operating range and ultra-low sleep currents, while the non-LF 'F' parts operate from 2.3V to 5.5V.
Key features include 4 configurable logic cells (CLC), a complementary waveform generator (CWG), a 5-bit DAC, comparators, 10-bit ADC with computation, 4 PWMs, 2 EUSART modules, and SPI/I2C peripherals - all classified as Core Independent Peripherals (CIPs) that offload tasks from the CPU. Peripherals can operate while the core sleeps, enabling event-driven designs that extend runtime on coin-cell batteries. The 20-pin SSOP footprint is one of the most widely used microchip packages, simplifying hand-prototyping and PCB layout reuse across the family.
Typical applications include consumer electronics, IoT sensor nodes, low-power wireless modules, home appliances, and battery-powered handheld instruments. The wide peripheral set also supports motor control, LED lighting, and simple user-interface subsystems. When designing with this MCU, consider using MPLAB X IDE with the XC8 compiler and PICkit or Snap programmer for development. Verified pricing and stock are available as of 2026-09-23 across DigiKey, Mouser, and Octopart.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing information gain beyond Microchip's product page.
کے لیے ڈراپ اِن متبادل PIC16LF15345-I/SS — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC16LF15345-I/SS (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف ADC, Core Architecture, DAC, Package, Program Memory (Flash).
PIC16LF15345T-I/SS
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC16F15345-I/SS
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16LF15344-I/SS
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16LF15355-I/SS
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC16LF15375-I/SS
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC16LF15345-I/SS زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core Architecture | PIC16 enhanced mid-range 8-bit RISC |
| Maximum CPU Speed | 32 MHz |
| Program Memory (Flash) | 14 KB (8K x 14 words) |
| Data SRAM | 1 KB |
| Operating Voltage Range | 1.8 V to 3.6 V (LF - XLP) |
| پیکیج | 20-pin SSOP (0.209 in / 5.30 mm body) |
| آپریٹنگ درجہ حرارت رینج | -40 C to +85 C (industrial) |
| ADC | 10-bit ADC with computation |
| DAC | 5-bit DAC |
| Comparators | Yes |
| PWM Modules | 4x |
| EUSART | 2x |
| SPI / I2C | Yes |
| Core Independent Peripherals (CLC) | 4x Configurable Logic Cells |
| Complementary Waveform Generator (CWG) | Yes |
| eXtreme Low-Power (XLP) | Yes |
| RoHS اسٹیٹس | Compliant |
| ماؤنٹنگ ٹائپ | Surface Mount |
PIC16LF15345-I/SS پن کنفیگریشن
| پن 1 | RA5 — General-purpose I/O / IOC / ADC channel |
| پن 2 | RA4 — General-purpose I/O / IOC / ADC channel |
| پن 3 | RA3 — General-purpose I/O / IOC / MCLR |
| پن 4 | RC5 — General-purpose I/O / PWM / EUSART RX |
| پن 5 | RC4 — General-purpose I/O / PWM / EUSART TX |
| پن 6 | RC3 — General-purpose I/O / PWM / SPI/I2C |
| پن 7 | RC2 — General-purpose I/O / PWM / comparator output |
| پن 8 | RC1 — General-purpose I/O / PWM / DAC output |
| پن 9 | RC0 — General-purpose I/O / ADC channel |
| پن 10 | VSS — Ground reference |
| پن 11 | VDD — Positive supply voltage (1.8V-3.6V) |
| پن 12 | RA2 — General-purpose I/O / DAC reference / ADC |
| پن 13 | RA1 — General-purpose I/O / comparator / ADC |
| پن 14 | RA0 — General-purpose I/O / ICSPDAT |
| پن 15 | RA7 — General-purpose I/O / OSC1 |
| پن 16 | RA6 — General-purpose I/O / OSC2 |
| پن 17 | RB7 — General-purpose I/O / EUSART TX |
| پن 18 | RB6 — General-purpose I/O / EUSART RX / ICSPCLK |
| پن 19 | RB5 — General-purpose I/O / PWM / CWG |
| پن 20 | RB4 — General-purpose I/O / PWM / CWG |
عام استعمالات
PIC16LF15345-I/SS کے لیے موزوں ہے 7 ایپلیکیشنs: Battery-Powered IoT Sensor Node, Home Appliance Control, LED Lighting and Signage, Consumer Handheld Devices, Automotive Body and Interior Modules, Industrial Sensor and Control Modules, Smart Home Wireless Nodes.
Battery-Powered IoT Sensor Node
The PIC16LF15345-I/SS is purpose-built for IoT sensor nodes where every microamp matters. Its 1.8V-3.6V XLP voltage range allows direct connection to single 3V coin cells (CR2032) or single-cell Li-ion/LiPo batteries, while nanoamp-range sleep currents extend runtime to years on a single battery. The 4 Core Independent Peripherals (CLC, CWG, comparators, timers) keep event processing active while the CPU sleeps, and the 10-bit ADC with computation handles sensor digitisation without waking the core. Combined with 2 EUSART modules and SPI/I2C, the MCU can interface LoRa, BLE modules, or environmental sensors. The 20-pin SSOP package is easy to hand-solder for prototype nodes.
تجویز کردہ
Home Appliance Control
The PIC16LF15345-I/SS fits home appliance controllers - washing machines, dishwashers, microwave ovens, and HVAC controls - where reliability and cost matter more than raw CPU speed. The 4 PWM modules drive motor and valve control, the CWG generates complementary drive signals for half-bridge power stages, and the 10-bit ADC reads temperature sensors and current shunts. The industrial -40C to +85C temperature range covers appliance thermal environments. The 20-SSOP package provides through-hole-like mechanical robustness with surface-mount manufacturing, and the 14KB Flash accommodates full user-interface plus motor-control firmware in a single chip.
تجویز کردہ
LED Lighting and Signage
The PIC16LF15345-I/SS drives LED lighting products including architectural strips, RGB color-mixing fixtures, and digital signage controllers. The 4 PWM channels provide individual dimming control for RGBW channels, while the CWG generates high-frequency complementary drive for synchronous buck or boost LED drivers. The 5-bit DAC enables logarithmic dimming curves matching human eye perception, and the 10-bit ADC reads ambient light sensors for daylight harvesting. The 32MHz core handles DMX512 or DALI protocol parsing in software, and the 14KB Flash supports full color-space conversion firmware. XLP low-power modes suit battery-powered decorative fixtures.
تجویز کردہ
Consumer Handheld Devices
The PIC16LF15345-I/SS powers consumer handheld products such as remote controls, electronic toys, fitness bands, and personal-care devices. The 1.8V-3.6V operating range supports direct alkaline battery stacks (2xAAA in series gives 3V), and the XLP sleep currents enable multi-year battery life. The 14KB Flash accommodates USB HID, IR protocol, or BLE command-and-control firmware, while the 1KB SRAM handles protocol buffers. Hardware PWM drives buzzers and vibration motors, and the comparators detect low-battery and USB-VBUS presence. The 20-SSOP package is small enough for compact handheld enclosures yet easy to manufacture.
تجویز کردہ
Automotive Body and Interior Modules
The PIC16LF15345-I/SS suits cost-sensitive automotive body and interior applications including mirror controllers, seat-position switches, ambient lighting, and HVAC vent motors. The 4 PWMs drive small DC and stepper motors for vent positioning, the ADC reads position feedback potentiometers, and the comparators detect switch closure with debouncing. Although not AEC-Q100 qualified, the -40C to +85C industrial temperature range covers most cabin environments. The 20-SSOP footprint is shared across the PIC16 family for PCB reuse across vehicle platforms. For under-hood or AEC-Q100-required applications, choose the AEC-Q100-graded variant from the same family.
تجویز کردہ
Industrial Sensor and Control Modules
The PIC16LF15345-I/SS is well-suited to industrial 24V sensor modules, process transmitters, and small PLC expansion cards. The 2 EUSART modules support RS-485 and RS-232 simultaneously via external transceivers, SPI/I2C connect to digital sensors and EEPROMs, and the ADC reads 4-20mA loop signals through a shunt. The CLCs implement hardware debouncing and frequency-to-digital conversion for flow sensors. The industrial temperature range -40C to +85C supports factory-floor environments, and the SSOP-20 package fits DIN-rail-mounted enclosures. The 14KB Flash handles Modbus RTU slave protocol plus calibration firmware.
تجویز کردہ
Smart Home Wireless Nodes
The PIC16LF15345-I/SS provides the host MCU for Zigbee, Z-Wave, LoRa, or sub-GHz wireless nodes in smart-home products. The MCU runs the wireless protocol state machine while its peripherals handle user input (buttons, capacitive touch via CLCs) and output (PWM-controlled LED indicators). The XLP sleep between STM32 (0.5uA typical) combined with wake-on-radio interrupts keeps battery-powered door sensors, window sensors, and leak detectors operational for years. The 14KB Flash supports Zigbee 3.0 stack or LoRaWAN MAC, and the SSOP-20 package allows compact PCB designs behind wall plates.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC16LF15345-I/SS — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC16LF15345T-I/SS | PIC16F15345-I/SS | PIC16LF15344-I/SS | PIC16LF15355-I/SS | PIC16LF15375-I/SS |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-pin SSOP | 20-pin SSOP (same) | 20-pin SSOP (same) | 20-pin SSOP (same) | 20-pin SSOP (same) | 20-pin SSOP (same) |
| Program Memory (Flash) | 14 KB (8K x 14) | 14 KB | 14 KB | 7 KB | 28 KB | 56 KB |
| Data SRAM | 1 KB | 1 KB | 1 KB | 512 B | 2 KB | 4 KB |
| Operating Voltage | 1.8 V to 3.6 V (XLP) | 1.8 V to 3.6 V | 2.3 V to 5.5 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| Maximum CPU Speed | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| ADC | 10-bit with computation | 10-bit ADC | 10-bit ADC | 10-bit ADC | 10-bit ADC | 10-bit ADC |
| Core Independent Peripherals (CLC) | 4x | 4x | 4x | 4x | 4x | 4x |
| PWM Modules | 4x | 4x | 4x | 4x | 4x | 4x |
| Price (qty 1, approx USD) | 1.42 | 1.42 (same die) | 1.32 | 1.25 | 1.62 | 1.85 |
اہم امتیازی خصوصیات
- Lowest-cost 14KB Flash XLP MCU in 20-pin SSOP package (بمقابلہPIC16LF15344-I/SS)
- Wider voltage range and drop-in compatibility above 2.3V (بمقابلہPIC16F15345-I/SS)
- Seamless memory upgrade path in same SSOP-20 footprint (بمقابلہPIC16LF15355-I/SS)
ڈیزائن نوٹس
Decouple VDD with a 100 nF ceramic capacitor placed within 5 mm of pin 11, plus a bulk capacitor (4.7 uF to 10 uF) at the board power entry. For XLP designs targeting sleep currents below 1 uA, ensure no leakage paths through pull-ups, voltage dividers, or unused peripherals. The PIC16LF15345-I/SS datasheet recommends disabling unused modules via the PMD (Peripheral Module Disable) registers to minimize active current draw during sleep. Estimated: with all peripherals disabled, the LF part achieves <100 nA typical sleep current at 3 V.
Route the ICSP programming lines (RA0/ICSPCLK, RA1/ICSPDAT or RB6/RB7 alternate pair) to an in-circuit programming header with no series resistors in the signal path. Place the programming header at the board edge for probe access. Keep the MCLR pull-up (typically 10 kohm) close to pin 4 to avoid noise-induced resets. For SSOP-20 packages, use 0.65 mm pitch traces and ensure the SSOP thermal pad (if present) connects to a small ground pour to aid reflow soldering.
Do not exceed 3.6 V on VDD - the LF variant is permanently damaged above this. Do not connect analog signals exceeding VDD to ADC inputs without clamping. The configuration words (fuses) must be set correctly - especially the WDTE (watchdog timer enable), LVP (low-voltage programming), and FOSC (oscillator selection). Forgetful configuration of FOSC prevents the MCU from oscillating. Always verify the config word settings in MPLAB X IDE before programming. The /SS suffix denotes SSOP package and -I denotes industrial -40C to +85C temperature range.
تعمیل کی معلومات
RoHS and REACH compliant per Microchip product page. Not AEC-Q100 qualified - automotive applications should select a Q-graded variant. Lead-free and halogen-free per Microchip environmental compliance documentation.
