PIC18F4410T-I/ML - 8-Bit 40MHz PIC MCU, 16KB Flash, 44-QFN | Microchip
MPN: PIC18F4410T-I/ML ✓ فعالPIC18F4410T-I/ML جائزہ
An 8-bit microcontroller (MCU) is a single-chip processor that uses an 8-bit data bus and is typically built on a Harvard or modified-Harvard architecture. Within the broader taxonomy, the PIC18F4410T-I/ML sits at: 8-bit MCU -> RISC microcontroller -> PIC18F family -> enhanced Flash microcontroller -> embedded controller -> semiconductor IC. The "PIC" name stands for "Peripheral Interface Controller," reflecting Microchip's original positioning as a peripheral-rich embedded controller for real-time control tasks.
Key features include nanoWatt power management for reduced active and sleep currents, a 10-bit ADC with up to 13 input channels, a hardware multiplier, up to 10 MIPS sustained throughput, and a wide 4.2V to 5.5V operating range. The device also features an enhanced capture/compare/PWM (ECCP) module, two comparators, and a master synchronous serial port (MSSP) that supports both SPI and I2C master/slave modes.
The PIC18F4410 uses Microchip's enhanced RISC architecture with a 16-bit instruction word and 8-bit data path, providing up to 10 MIPS at 40 MHz. The integrated 10-bit ADC supports up to 13 channels with acquisition time programmable down to a few hundred nanoseconds, enabling precise sensor reads without an external converter. On-chip peripherals are accessible through a memory-mapped register scheme designed for low-latency, deterministic interrupt response in real-time control loops.
Typical applications include industrial automation control, automotive body and chassis subsystems, consumer electronics user interfaces, low-end motor control (BLDC and stepper), and sensor interface nodes. Its 36 I/O count and 44-QFN footprint also suit compact human-machine interface (HMI) boards where PCB real estate is constrained.
When designing with this part, note that the "T" suffix indicates Tape & Reel packaging and "I" denotes the -40C to +85C industrial temperature grade. Ensure the exposed pad is soldered to a sufficient copper pour to meet the package's thermal resistance specification.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate and source the PIC18F4410T-I/ML efficiently.
کے لیے ڈراپ اِن متبادل PIC18F4410T-I/ML — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC18F4410T-I/ML (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Core Architecture, Operating Temperature, ADC, Mounting Type.
PIC18F4410-I/ML
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC18F4510T-I/ML
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC18LF4410-I/ML
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC18F43K22-I/ML
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC18F4321-I/ML
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC18F4420T-I/ML
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC18F4410T-I/ML زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core Architecture | 8-bit PIC18F RISC |
| CPU Core | PIC18 |
| Maximum CPU Frequency | 40 MHz |
| Program Memory Type | Flash |
| Program Memory Size | 16 KB (8K x 16) |
| RAM Size | 768 bytes |
| EEPROM Size | 256 bytes |
| I/O Pins | 36 |
| Supply Voltage Range | 4.2 V to 5.5 V |
| ADC | 10-bit, 13 channels |
| Communication Interfaces | 1x MSSP (I2C/SPI), 1x EUSART, 1x AUSART |
| PWM Modules | ECCP (Enhanced Capture/Compare/PWM) |
| Comparators | 2 |
| Timers | 8-bit and 16-bit |
| پیکیج | 44-QFN (8x8 mm) with exposed pad (ML) |
| ماؤنٹنگ ٹائپ | Surface Mount |
| آپریٹنگ درجہ حرارت | -40 C to +85 C (industrial grade, "I" suffix) |
| Power Management | nanoWatt Technology |
| Instruction Set | 16-bit instructions, 8-bit data path |
| RoHS اسٹیٹس | Compliant |
PIC18F4410T-I/ML پن کنفیگریشن
| پن 1 | NC — Not connected |
| پن 2 | RA0/AN0 — PORTA bit 0 / Analog input 0 |
| پن 3 | RA1/AN1 — PORTA bit 1 / Analog input 1 |
| پن 4 | RA2/AN2/VREF- — PORTA bit 2 / Analog input 2 / ADC VREF- |
| پن 5 | RA3/AN3/VREF+ — PORTA bit 3 / Analog input 3 / ADC VREF+ |
| پن 6 | RA4/T0CKI — PORTA bit 4 / Timer0 clock input |
| پن 7 | RA5/AN4/SS — PORTA bit 5 / Analog input 4 / SPI Slave Select |
| پن 8 | OSC2/CLKO/RA6 — Oscillator output / Clock output / PORTA bit 6 |
| پن 9 | OSC1/CLKI/RA7 — Oscillator input / Clock input / PORTA bit 7 |
| پن 10 | RC0/T1OSO/T1CKI — PORTC bit 0 / Timer1 oscillator output / Timer1 clock |
| پن 11 | RC1/T1OSI/CCP2 — PORTC bit 1 / Timer1 oscillator input / CCP2 I/O |
| پن 12 | RC2/CCP1 — PORTC bit 2 / Enhanced CCP1 |
| پن 13 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock |
| پن 14 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data |
| پن 15 | RC5/SDO — PORTC bit 5 / SPI data out |
| پن 16 | RC6/TX/CK — PORTC bit 6 / EUSART TX / EUSART clock |
| پن 17 | RC7/RX/DT — PORTC bit 7 / EUSART RX / EUSART data |
| پن 18 | VSS — Ground reference |
| پن 19 | VDD — Positive supply (4.2V-5.5V) |
| پن 20 | VSS — Ground reference |
| پن 21 | RB0/INT0/AN12 — PORTB bit 0 / External interrupt 0 / Analog input 12 |
| پن 22 | RB1/INT1/AN10 — PORTB bit 1 / External interrupt 1 / Analog input 10 |
| پن 23 | RB2/INT2/AN8 — PORTB bit 2 / External interrupt 2 / Analog input 8 |
| پن 24 | RB3/INT3/CCP2/AN9 — PORTB bit 3 / External interrupt 3 / CCP2 / Analog input 9 |
| پن 25 | RB4/AN11 — PORTB bit 4 / Analog input 11 |
| پن 26 | RB5/AN13/CCP3 — PORTB bit 5 / Analog input 13 / CCP3 |
| پن 27 | RB6/PGC — PORTB bit 6 / In-circuit debugger clock |
| پن 28 | RB7/PGD — PORTB bit 7 / In-circuit debugger data |
| پن 29 | RD0/PSP0 — PORTD bit 0 / Parallel Slave Port bit 0 |
| پن 30 | RD1/PSP1 — PORTD bit 1 / Parallel Slave Port bit 1 |
| پن 31 | RD2/PSP2 — PORTD bit 2 / Parallel Slave Port bit 2 |
| پن 32 | RD3/PSP3 — PORTD bit 3 / Parallel Slave Port bit 3 |
| پن 33 | RD4/PSP4 — PORTD bit 4 / Parallel Slave Port bit 4 |
| پن 34 | RD5/PSP5 — PORTD bit 5 / Parallel Slave Port bit 5 |
| پن 35 | RD6/PSP6/TX2 — PORTD bit 6 / Parallel Slave Port bit 6 / AUSART TX |
| پن 36 | RD7/PSP7/RX2 — PORTD bit 7 / Parallel Slave Port bit 7 / AUSART RX |
| پن 37 | VSS — Ground reference |
| پن 38 | VDD — Positive supply (4.2V-5.5V) |
| پن 39 | RE0/RD/AN5 — PORTE bit 0 / Read control / Analog input 5 |
| پن 40 | RE1/WR/AN6 — PORTE bit 1 / Write control / Analog input 6 |
| پن 41 | RE2/CS/AN7 — PORTE bit 2 / Chip select / Analog input 7 |
| پن 42 | VDD — Positive supply (4.2V-5.5V) |
| پن 43 | VSS — Ground reference |
| پن 44 | MCLR/VPP/RE3 — Master Clear (active low reset) / Programming voltage / PORTE bit 3 |
عام استعمالات
PIC18F4410T-I/ML کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Automation Control, Automotive Body Electronics, Consumer Electronics HMI, Low-End BLDC Motor Control, Sensor Interface Nodes, Educational and Prototyping Platforms.
Industrial Automation Control
The PIC18F4410T-I/ML is well-suited to industrial automation controllers where its 40 MHz CPU delivers 10 MIPS for deterministic PID loops and ladder-logic emulation. Its 36 I/O pins drive relays, optocouplers, and digital inputs across multiple isolated banks, while the 10-bit ADC with 13 channels digitizes thermocouple, pressure, and 4-20 mA sensor signals. The -40C to +85C industrial temperature grade and nanoWatt sleep modes allow reliable long-term deployment in PLC I/O modules and sensor interface nodes where the exposed-pad 44-QFN package sheds heat efficiently in confined control cabinets.
تجویز کردہ
Automotive Body Electronics
For non-safety automotive body controllers such as seat controllers, mirror adjusters, mirror heaters, and HVAC blend doors, the PIC18F4410T-I/ML provides the right balance of cost, I/O count, and ADC resolution. Its 4.2V-5.5V supply tolerates cranking transients when paired with an external TVS clamp, and the 40 MHz CPU handles LIN slave protocol stacks in software. The 36 I/O easily drives LED matrix indicators and brushed motor bridges via ECCP PWM. Engineers designing automotive subsystems should use the Q-version for AEC-Q100 instead.
تجویز کردہ
Consumer Electronics HMI
In consumer HMI products such as white-goods control panels, smart thermostats, and home appliances, the PIC18F4410T-I/ML drives segment LCDs via software multiplexing and reads capacitive touch buttons via the CTMU peripheral on similar-family parts. The 10-bit ADC quantizes NTC temperature sensors and potentiometers with adequate resolution for set-point control. Its 16 KB Flash accommodates state-machine UI code plus small bitmap tables, and the 44-QFN's compact 8x8 mm footprint enables slim-bezel front-panel designs.
تجویز کردہ
Low-End BLDC Motor Control
Small BLDC fans, PC cooling fans, and pump controllers can use the PIC18F4410T-I/ML's ECCP module to generate complementary PWM with programmable dead-band, plus the 13-channel ADC for back-EMF zero-cross sensing. The 40 MHz CPU runs sensorless 6-step commutation algorithms with comfortable instruction headroom. The 36 I/O count accommodates three half-bridges plus Hall-sensor inputs and tachometer output. For higher-current or sensored-FOC designs, scale up to the dsPIC33FJ family for hardware sinusoidal PWM.
تجویز کردہ
Sensor Interface Nodes
For distributed sensor nodes in industrial IoT gateways, the PIC18F4410T-I/ML acts as a low-cost analog front-end aggregator. Its 13 ADC channels multiplex multiple 0-10V or 4-20 mA transducer inputs into a single RS-485 stream via the EUSART, while nanoWatt sleep mode reduces quiescent current to microampere levels between scans. The 16 KB Flash stores calibration tables and protocol stacks for Modbus RTU. The 256-byte EEPROM retains node configuration and calibration coefficients across power cycles without external storage.
تجویز کردہ
Educational and Prototyping Platforms
The PIC18F4410T-I/ML remains a popular choice for university embedded courses and hobbyist prototyping because of the PIC18F's mature toolchain (MPLAB X IDE, XC8 compiler, PICkit in-circuit debuggers) and abundant example code. Its 44-QFN package teaches QFN soldering and exposed-pad thermal design, while 36 I/O and three serial peripherals expose students to nearly every common embedded interface in one part. The 16 KB Flash constrains projects in a healthy way, encouraging modular C code design.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC18F4410T-I/ML — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC18F4410-I/ML | PIC18F4510T-I/ML | PIC18LF4410-I/ML | PIC18F43K22-I/ML | PIC18F4321-I/ML | PIC18F4420T-I/ML |
|---|---|---|---|---|---|---|---|
| Package | 44-QFN (ML) 8x8 mm | 44-QFN (ML) 8x8 mm - same | 44-QFN (ML) 8x8 mm - same | 44-QFN (ML) 8x8 mm - same | 44-QFN (ML) 8x8 mm - same | 44-QFN (ML) 8x8 mm - same | 44-QFN (ML) 8x8 mm - same |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same |
| Core | 8-bit PIC18F @ 40 MHz | 8-bit PIC18F @ 40 MHz | 8-bit PIC18F @ 40 MHz | 8-bit PIC18LF @ 40 MHz | 8-bit PIC18F K @ 64 MHz | 8-bit PIC18F @ 40 MHz | 8-bit PIC18F @ 40 MHz |
| Flash Memory | 16 KB | 16 KB | 32 KB | 16 KB | 8 KB | 8 KB | 16 KB |
| RAM | 768 B | 768 B | 1536 B | 768 B | 1024 B | 256 B | 768 B |
| Supply Voltage | 4.2 V to 5.5 V | 4.2 V to 5.5 V | 4.2 V to 5.5 V | 2.0 V to 3.6 V | 2.3 V to 5.5 V | 4.2 V to 5.5 V | 4.2 V to 5.5 V |
| I/O Pins | 36 | 36 | 36 | 36 | 36 | 34 | 36 |
| ADC | 10-bit, 13 channels | 10-bit, 13 ch | 10-bit, 13 ch | 10-bit, 13 ch | 10-bit, 28 ch | 10-bit, 12 ch | 10-bit, 13 ch |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +125 C | -40 C to +85 C | -40 C to +85 C |
اہم امتیازی خصوصیات
- Industrial temperature grade with nanoWatt power management (بمقابلہPIC18F4321-I/ML)
- Memory headroom upgrade path in identical footprint (بمقابلہPIC18F4410-I/ML)
- Mature 5V-only PIC18F with broad toolchain support (بمقابلہPIC18F43K22-I/ML)
ڈیزائن نوٹس
The 44-QFN package's exposed thermal pad (pin 45) MUST be soldered to a ground copper pour for both electrical reference and thermal dissipation. Estimated: with theta_JA near 28 C/W on a 1-oz 4-layer JEDEC test board, sustained 80 mA core current at 5V (0.4W) yields a junction rise of ~11 C above ambient - well within industrial limits. Without the exposed pad soldered, theta_JA can exceed 80 C/W, causing severe self-heating.
Place a 100 nF decoupling capacitor within 5 mm of every VDD pin (pins 19, 38, 42) and a bulk 10 uF tantalum or ceramic near the package. For the ADC VREF+ (RA3), place a 100 nF ceramic plus 10 uF bulk capacitor directly at the pin to minimize ADC noise. The MCLR pin (44) requires a 10 kohm pull-up to VDD and, if used for in-circuit debugging, a series diode/capacitor network per PICkit schematics.
Do not assume that the 16-bit-wide Flash enables byte-level programming - PIC18F parts use 16-bit word writes. When migrating from PIC16F to PIC18F4410T-I/ML, rewrite erase-then-write loops for word, not byte, alignment. Also note that Configuration bits (CONFIG1H, CONFIG2L, etc.) must be set in the source code and programmed separately; an unconfigured part runs with the default oscillator = internal RC, which may surprise first-time users.
The MSSP peripheral's I2C mode requires external pull-up resistors on SDA/SCL (typically 4.7 kohm at 100 kHz, 1-2 kohm at 400 kHz). The EUSART in RS-485 mode needs an external transceiver IC like the MAX485 - the PIC's TX/RX pins are TTL-level only. For SPI at speeds above 4 MHz, keep clock traces under 50 mm and use a ground reference plane to avoid reflections.
تعمیل کی معلومات
PIC18F4410T-I/ML is RoHS-compliant per Microchip product page. Not AEC-Q100 qualified; use PIC18F46K22-I/PT or automotive-grade PIC18F variants for AEC-Q100 needs. Industrial -40C to +85C temperature grade.
