PIC18F46K20-E/PT - 64KB Flash 8-bit MCU, 48MHz, XLP, 44-TQFP | Microchip
MPN: PIC18F46K20-E/PT ✓ فعالPIC18F46K20-E/PT جائزہ
An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, combining CPU core, non-volatile Flash program memory, volatile SRAM, configurable digital I/O, on-chip timers, and mixed-signal peripherals such as ADCs and PWM modules. Within the broader taxonomy, the PIC18F46K20 belongs to the Flash microcontroller sub-family of microcontrollers, which itself sits inside the semiconductor / integrated circuit hierarchy. XLP variants extend the family with ultra-low sleep currents (down to the nanoampere range), targeting battery-powered and energy-harvesting designs.
Key features include 36 configurable digital I/O pins, a 10-bit ADC with up to 28 channels, multiple Enhanced USART, SPI, and I2C peripherals, and Capture/Compare/PWM (ECCP) modules. The XLP technology provides nanoWatt sleep modes, and the device supports an extended instruction set option for code-density optimization. Core-independent peripherals reduce CPU wake-ups for responsive, low-power embedded control.
The architecture is built on Microchip's enhanced RISC core with a Harvard bus, 16-bit instruction word, hardware multiplier, and an 8-level deep hardware stack. Linear program memory addressing up to 64 KB and linear data addressing up to 3936 bytes simplify C compiler output. The 48 MHz internal oscillator, combined with 4x PLL options, delivers 12 MIPS throughput while preserving low-power flexibility.
Typical applications include low-power wireless sensor nodes, portable medical and consumer devices, HVAC and home-automation controllers, USB/HID peripherals using the on-chip full-speed USB, and industrial sensing platforms that require CAN-style robustness or serial connectivity.
When designing with this part, place decoupling capacitors (100 nF ceramic plus bulk) as close as possible to each VDD/VSS pair, route the ICP/ICSP clock and data signals for in-circuit programming access, and respect the absolute maximum VDD rating. For sleep-mode designs, verify leakage budgets with the XLP parameter table.
This page synthesizes distributor pricing, drop-in 44-TQFP alternatives, and XLP design notes not aggregated on any single manufacturer or distributor page.
کے لیے ڈراپ اِن متبادل PIC18F46K20-E/PT — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC18F46K20-E/PT (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف ADC, Timers, Package, Program Memory (Flash), Core Architecture.
PIC18F46K20-I/PT
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC18F46K20T-I/PT
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC18F44K20-I/PT
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC18F4620-I/PT
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC18F45K20-I/PT
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC18F46K20-E/PT زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Device Family | PIC18F K-series (nanoWatt XLP) |
| CPU Core | PIC18 Enhanced RISC, 8-bit |
| Max CPU Frequency | 48 MHz (12 MIPS) |
| Program Flash Memory | 64 KB (32K x 16 words) |
| SRAM | 3936 bytes |
| EEPROM | 1024 bytes |
| Digital I/O Pins | 36 |
| ADC | 10-bit, up to 28 channels |
| پیکیج | 44-pin TQFP (PT), 10x10 mm |
| ماؤنٹنگ ٹائپ | Surface Mount |
| Supply Voltage (VDD) | 1.8 V to 3.6 V |
| Operating Temperature Range (E suffix) | -40C to +125C (extended) |
| Communication Peripherals | EUSART, SPI, I2C |
| PWM / CCP | Enhanced CCP modules |
| Low-Power Technology | nanoWatt XLP |
| Instruction Set | 75 + optional extended set |
| RoHS اسٹیٹس | Compliant |
PIC18F46K20-E/PT پن کنفیگریشن
| پن 1 | RA0/AN0 — PORTA bit 0 / analog input AN0 |
| پن 2 | RA1/AN1 — PORTA bit 1 / analog input AN1 |
| پن 3 | RA2/AN2/VREF- — PORTA bit 2 / analog input AN2 / negative reference |
| پن 4 | RA3/AN3/VREF+ — PORTA bit 3 / analog input AN3 / positive reference |
| پن 5 | RA4/T0CKI — PORTA bit 4 / Timer0 clock input |
| پن 6 | RA5/AN4/SS — PORTA bit 5 / analog input AN4 / SPI slave select |
| پن 7 | RA6 — PORTA bit 6 |
| پن 8 | RA7 — PORTA bit 7 |
| پن 9 | OSC1/CLKIN — Crystal oscillator input / external clock in |
| پن 10 | OSC2/CLKOUT — Crystal oscillator output / clock out |
| پن 11 | RC0 — PORTC bit 0 |
| پن 12 | RC1 — PORTC bit 1 |
| پن 13 | RC2 — PORTC bit 2 |
| پن 14 | RC3 — PORTC bit 3 |
| پن 15 | RC4 — PORTC bit 4 |
| پن 16 | RC5 — PORTC bit 5 |
| پن 17 | RC6 — PORTC bit 6 |
| پن 18 | RC7 — PORTC bit 7 |
| پن 19 | VSS — Ground reference |
| پن 20 | VDD — Positive supply (1.8 V to 3.6 V) |
| پن 21 | RB0/INT0 — PORTB bit 0 / external interrupt 0 |
| پن 22 | RB1/INT1 — PORTB bit 1 / external interrupt 1 |
| پن 23 | RB2/INT2 — PORTB bit 2 / external interrupt 2 |
| پن 24 | RB3/INT3 — PORTB bit 3 / external interrupt 3 |
| پن 25 | RB4 — PORTB bit 4 |
| پن 26 | RB5 — PORTB bit 5 |
| پن 27 | RB6/PGC — PORTB bit 6 / ICSP clock |
| پن 28 | RB7/PGD — PORTB bit 7 / ICSP data |
| پن 29 | VSS — Ground reference |
| پن 30 | VDD — Positive supply (1.8 V to 3.6 V) |
| پن 31 | RD0 — PORTD bit 0 |
| پن 32 | RD1 — PORTD bit 1 |
| پن 33 | RD2 — PORTD bit 2 |
| پن 34 | RD3 — PORTD bit 3 |
| پن 35 | RD4 — PORTD bit 4 |
| پن 36 | RD5 — PORTD bit 5 |
| پن 37 | RD6 — PORTD bit 6 |
| پن 38 | RD7 — PORTD bit 7 |
| پن 39 | VSS — Ground reference |
| پن 40 | VDD — Positive supply (1.8 V to 3.6 V) |
| پن 41 | RE0/RD — PORTE bit 0 / parallel slave port read |
| پن 42 | RE1/WR — PORTE bit 1 / parallel slave port write |
| پن 43 | RE2/CS — PORTE bit 2 / parallel slave port chip select |
| پن 44 | AVDD — Analog positive supply (tie to VDD) |
عام استعمالات
PIC18F46K20-E/PT کے لیے موزوں ہے 6 ایپلیکیشنs: Battery-Powered Wireless Sensor Nodes, Industrial HVAC and Building Automation Controllers, Portable Medical and Consumer Devices, USB Human Interface Devices (HID), Automotive-Adjacent Sensor Interfaces, Smart Energy and Metering Endpoints.
Battery-Powered Wireless Sensor Nodes
The PIC18F46K20-E/PT's nanoWatt XLP technology delivers nanoampere-range Sleep currents that let battery-powered sensor nodes run for years on a single cell. With 64 KB Flash it accommodates Zigbee, LoRa, or proprietary RF protocol stacks alongside sensor-conditioning firmware, and the 10-bit ADC with up to 28 channels supports multi-sensor PCB designs. The 1.8-3.6 V VDD range is ideal for direct 2x AA or single-cell Li-Ion operation without level shifters. Paired with Microchip's MRF89XA sub-GHz transceiver on the SPI bus, the design stays inside the same low-power envelope across transmit, receive, and sleep.
تجویز کردہ
Industrial HVAC and Building Automation Controllers
For HVAC and building-automation controllers, the PIC18F46K20-E/PT provides 36 digital I/O for relay drivers, triac interfaces, and keypad scanning, plus a 10-bit ADC to read temperature and pressure transducers. The enhanced CCP modules generate PWM outputs for fan-speed and damper control, while EUSART links to BACnet or Modbus gateways. The extended -40C to +125C grade survives rooftop and plant-room thermal stress. Wide VDD tolerance simplifies 24 V-derived supply design with a single buck regulator feeding the MCU rail.
تجویز کردہ
Portable Medical and Consumer Devices
Portable medical and consumer devices benefit from the PIC18F46K20-E/PT combination of XLP sleep currents, 64 KB Flash for UI/state-machine code, and 1024 bytes of EEPROM for non-volatile calibration storage. The 10-bit ADC samples biometric signals (pulse, SpO2 LED current, body temperature) with adequate resolution for consumer-grade accuracy, and the EUSART/SPI/I2C peripherals stream data to BLE modules or OLED displays. The 48 MHz core keeps LCD refresh and touch-sensing scan loops well within budget, preserving battery life.
تجویز کردہ
USB Human Interface Devices (HID)
Although PIC18F46K20 lacks native USB, the EUSART plus firmware-based bit-banging on a CCP-driven timer implements USB HID bridges at low cost, or pairs with an external USB-serial bridge such as MCP2200. The 64 KB Flash is sufficient for HID report handlers, debouncing, and embedded command parsers. Industrial temperature grade and 3.3 V I/O tolerance allow direct co-existence with USB-supply rails. This makes the part a fit for custom keyboards, pointer devices, and low-cost industrial input panels.
تجویز کردہ
Automotive-Adjacent Sensor Interfaces
The PIC18F46K20-E/PT's extended -40C to +125C temperature range and 1.8-3.6 V operation map well to automotive-adjacent sensor interfacing in cabin, body, or under-hood-near applications. Ten-bit ADC channels digitize throttle, pressure, and battery-sense signals; ECCP modules drive small BLDC or stepper actuators; EUSART streams diagnostics to a CAN gateway via MCP2551. The 64 KB Flash hosts AUTOSAR-lite or vendor-specific stack profiles. Note that for safety-critical powertrain, an AEC-Q100-qualified part is required.
تجویز کردہ
Smart Energy and Metering Endpoints
Smart energy and metering endpoints use the PIC18F46K20-E/PT to digitize CT- or shunt-derived current and voltage signals via the 10-bit ADC, then run metering algorithms and load-profile logging in 64 KB Flash. The EEPROM stores calibration constants across power-loss events, and the EUSART pushes data to a concentrator over RS-485. The XLP Sleep modes cut standby power below regulatory thresholds during no-load periods, and the industrial temperature range tolerates outdoor cabinet environments.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC18F46K20-E/PT — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC18F46K20-I/PT | PIC18F46K20T-I/PT | PIC18F44K20-I/PT | PIC18F4620-I/PT | PIC18F45K20-I/PT |
|---|---|---|---|---|---|---|
| Package | 44-TQFP (PT, 10x10 mm) | 44-TQFP (PT, 10x10 mm) | 44-TQFP (PT, 10x10 mm) | 44-TQFP (PT, 10x10 mm) | 44-TQFP (PT, 10x10 mm) | 44-TQFP (PT, 10x10 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 64 KB | 64 KB | 64 KB | 16 KB | 64 KB | 32 KB |
| SRAM | 3936 bytes | 3936 bytes | 3936 bytes | 768 bytes | 3968 bytes | 1536 bytes |
| EEPROM | 1024 bytes | 1024 bytes | 1024 bytes | 256 bytes | 1024 bytes | 1024 bytes |
| Max CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 40 MHz | 48 MHz |
| Low-Power XLP | Yes (nanoWatt XLP) | Yes (nanoWatt XLP) | Yes (nanoWatt XLP) | Yes (nanoWatt XLP) | No (legacy nanoWatt) | Yes (nanoWatt XLP) |
| Operating Temperature Range | -40C to +125C (extended) | -40C to +85C (industrial) | -40C to +85C (industrial) | -40C to +85C (industrial) | -40C to +85C (industrial) | -40C to +85C (industrial) |
| Digital I/O Pins | 36 | 36 | 36 | 36 | 36 | 36 |
اہم امتیازی خصوصیات
- Nanoampere-class Sleep current for multi-year battery life (بمقابلہPIC18F4620-I/PT)
- Industrial maximum temperature +125C grade (E suffix) (بمقابلہPIC18F46K20-I/PT)
- Full 64 KB Flash and 3936-byte SRAM match higher-end 44-pin variants (بمقابلہPIC18F44K20-I/PT)
ڈیزائن نوٹس
Decouple every VDD/VSS pair with a 100 nF ceramic capacitor placed within 5 mm of the pin, and add a single 10 uF bulk capacitor near the device. For XLP sleep designs, use the MCP1700 low-Iq LDO so the regulator quiescent current does not dominate the MCU sleep budget. The MCU draws 8-100 nA in Deep Sleep depending on peripherals enabled - verify with the XLP parameter table for your exact configuration.
Route the ICSP/ICD clock (PGC, RB6) and data (PGD, RB7) signals to a dedicated 6-pin header so the board can be programmed in-circuit without rework. Keep analog and digital ground returns separate and join at a single point near the AVDD pin. The 44-TQFP land pattern requires 0.8 mm pitch traces - use 0.2 mm trace width with 0.2 mm clearance to maintain signal integrity on adjacent ADC inputs.
Do not exceed 3.6 V on any VDD pin or you will damage the MCU; if a 5 V rail is present, level-shift every I/O. Enable the watchdog timer in firmware to recover from brown-out or undefined-state events. When migrating from PIC18F4620 to PIC18F46K20, re-validate Sleep current values because the XLP parameter set is different - the legacy nanoWatt Sleep number is not a like-for-like comparison.
تعمیل کی معلومات
RoHS and REACH compliant per Microchip product page; lead-free and halogen-free per datasheet. Not AEC-Q100 qualified - choose dsPIC33 or PIC18 Q-series for automotive safety-critical designs.