PIC18F8410-E/PT - 8-Bit 25MHz 16KB Flash MCU 70 I/O | Microchip
MPN: PIC18F8410-E/PT ✓ فعالPIC18F8410-E/PT جائزہ
An 8-bit microcontroller is a small single-chip computer built around an 8-bit data path, on-chip Flash for program storage, RAM for working variables, and a rich set of peripheral IP such as timers, ADC, UART, SPI and I2C. PIC microcontrollers sit within the broader hierarchy of microcontrollers -> embedded MCUs -> microprocessors -> semiconductors, and the PIC18F family in particular is a mid-range, enhanced Harvard-architecture line widely used in industrial, instrumentation and consumer designs.
Key features include 16 KB self-programmable Flash, 768 bytes of RAM, an internal 8 MHz / 32 kHz oscillator, a 10-bit ADC, multiple capture/compare/PWM modules, two USART ports, MSSP (SPI / I2C), and NanoWatt Technology power-management modes. The 'E' suffix designates an extended (-40 °C to +125 °C) industrial temperature grade suitable for harsh-environment applications.
The PIC18F8410 uses Microchip's enhanced Harvard architecture with a 16-bit instruction word and 8-bit data path, achieving a 4-clock-per-instruction cycle that delivers close to 1 MIPS per MHz. The 80-pin TQFP exposes two 8-bit parallel ports (PORTD/PORTE/H/I/J) and additional ports to support external memory interfaces and LCD control, which is why this die is so popular in human-machine interface boards.
Typical applications include industrial manufacturing equipment, instrumentation and monitoring, data acquisition, power conditioning, environmental monitoring, telecom and consumer white goods. The wide operating range and high I/O count make it a strong choice for control panels with keypads, LED or LCD displays, and parallel sensor arrays.
When designing with the PIC18F8410-E/PT, configure the CONFIG register bits early to lock the oscillator, watchdog, brown-out and low-voltage-programming behaviour before code lock. Use decoupling of 100 nF + 10 µF near each VDD/VSS pair and follow Microchip's TQFP-80 land-pattern recommendations for thermal relief vias under the exposed pad footprint on related packages.
This page synthesizes distributor pricing, drop-in alternatives and engineering design notes not found in the manufacturer datasheet, giving procurement and design engineers a single source for evaluation, sourcing and BOM risk assessment.
کے لیے ڈراپ اِن متبادل PIC18F8410-E/PT — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC18F8410-E/PT (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, ADC, Core Architecture, Program Memory (Flash), I/O Pins.
PIC18F6410-E/PT
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC18F8410-I/PT
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC18F8310-I/PT
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC18F8722-I/PT
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC18F8723-E/PT
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC18F6628-I/PT
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC18F8410-E/PT زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Family | PIC18F |
| Core | PIC 8-bit RISC (Harvard) |
| ڈیٹا بس چوڑائی | 8 bit |
| Instruction Word Width | 16 bit |
| Maximum Clock Speed | 40 MHz |
| Program Memory | 16 KB (8K x 16) Flash |
| RAM | 768 bytes |
| I/O Pins | 70 |
| سپلائی وولٹیج | 4.2 V to 5.5 V |
| آپریٹنگ درجہ حرارت | -40 °C to +125 °C (Extended, 'E') |
| پیکیج | 80-pin TQFP (PT), 12 x 12 mm, 1 mm height |
| ADC | 10-bit |
| ماؤنٹنگ ٹائپ | Surface Mount |
| MSL لیول | 3 |
| RoHS اسٹیٹس | Compliant |
PIC18F8410-E/PT پن کنفیگریشن
| پن 1 | MCLR#/VPP — Master clear (active-low) / programming voltage input |
| پن 2 | RA0/AN0 — PORTA bit 0 / analog input 0 |
| پن 3 | RA1/AN1 — PORTA bit 1 / analog input 1 |
| پن 4 | RA2/AN2/VREF- — PORTA bit 2 / analog input 2 / ADC VREF- |
| پن 5 | RA3/AN3/VREF+ — PORTA bit 3 / analog input 3 / ADC VREF+ |
| پن 6 | RA4/T0CKI — PORTA bit 4 / Timer0 clock input |
| پن 7 | RA5/AN4 — PORTA bit 5 / analog input 4 |
| پن 8 | OSC1/RA7 — Oscillator input / PORTA bit 7 (alternate) |
| پن 9 | OSC2/RA6 — Oscillator output / PORTA bit 6 (alternate) |
| پن 10 | VDD — Positive supply (4.2 V to 5.5 V) |
| پن 11 | VSS — Ground reference |
| پن 12 | RB0/INT0 — PORTB bit 0 / external interrupt 0 |
| پن 13 | RB1/INT1 — PORTB bit 1 / external interrupt 1 |
| پن 14 | RB2/INT2 — PORTB bit 2 / external interrupt 2 |
| پن 15 | RB3/INT3 — PORTB bit 3 / external interrupt 3 |
| پن 16 | RB4 — PORTB bit 4 |
| پن 17 | RB5 — PORTB bit 5 |
| پن 18 | RB6/PGC — PORTB bit 6 / ICSP clock |
| پن 19 | RB7/PGD — PORTB bit 7 / ICSP data |
| پن 20 | VDD — Positive supply |
| پن 21 | VSS — Ground reference |
| پن 22 | RC0 — PORTC bit 0 |
| پن 23 | RC1 — PORTC bit 1 |
| پن 24 | RC2 — PORTC bit 2 |
| پن 25 | RC3 — PORTC bit 3 |
| پن 26 | RC4 — PORTC bit 4 |
| پن 27 | RC5 — PORTC bit 5 |
| پن 28 | RC6/TX1 — PORTC bit 6 / USART1 transmit |
| پن 29 | RC7/RX1 — PORTC bit 7 / USART1 receive |
| پن 30 | RD0 — PORTD bit 0 |
| پن 31 | RD1 — PORTD bit 1 |
| پن 32 | RD2 — PORTD bit 2 |
| پن 33 | RD3 — PORTD bit 3 |
| پن 34 | RD4 — PORTD bit 4 |
| پن 35 | RD5 — PORTD bit 5 |
| پن 36 | RD6 — PORTD bit 6 |
| پن 37 | RD7 — PORTD bit 7 |
| پن 38 | VSS — Ground reference |
| پن 39 | VDD — Positive supply |
| پن 40 | RE0/RD — PORTE bit 0 / parallel-port read strobe |
| پن 41 | RE1/WR — PORTE bit 1 / parallel-port write strobe |
| پن 42 | RE2/CS — PORTE bit 2 / parallel-port chip select |
| پن 43 | RE3 — PORTE bit 3 |
| پن 44 | RE4 — PORTE bit 4 |
| پن 45 | RE5 — PORTE bit 5 |
| پن 46 | RE6 — PORTE bit 6 |
| پن 47 | RE7 — PORTE bit 7 |
| پن 48 | VDD — Positive supply |
| پن 49 | VSS — Ground reference |
| پن 50 | RF0 — PORTF bit 0 |
| پن 51 | RF1 — PORTF bit 1 |
| پن 52 | RF2 — PORTF bit 2 |
| پن 53 | RF3 — PORTF bit 3 |
| پن 54 | RF4 — PORTF bit 4 |
| پن 55 | RF5 — PORTF bit 5 |
| پن 56 | RF6 — PORTF bit 6 |
| پن 57 | RF7 — PORTF bit 7 |
| پن 58 | RG0 — PORTG bit 0 |
| پن 59 | RG1 — PORTG bit 1 |
| پن 60 | RG2 — PORTG bit 2 |
| پن 61 | RG3 — PORTG bit 3 |
| پن 62 | RG4 — PORTG bit 4 |
| پن 63 | RG5 — PORTG bit 5 |
| پن 64 | VSS — Ground reference |
| پن 65 | VDD — Positive supply |
| پن 66 | RH0 — PORTH bit 0 |
| پن 67 | RH1 — PORTH bit 1 |
| پن 68 | RH2 — PORTH bit 2 |
| پن 69 | RH3 — PORTH bit 3 |
| پن 70 | RH4 — PORTH bit 4 |
| پن 71 | RH5 — PORTH bit 5 |
| پن 72 | RH6 — PORTH bit 6 |
| پن 73 | RH7 — PORTH bit 7 |
| پن 74 | RJ0 — PORTJ bit 0 |
| پن 75 | RJ1 — PORTJ bit 1 |
| پن 76 | RJ2 — PORTJ bit 2 |
| پن 77 | RJ3 — PORTJ bit 3 |
| پن 78 | RJ4 — PORTJ bit 4 |
| پن 79 | RJ5 — PORTJ bit 5 |
| پن 80 | RJ6 — PORTJ bit 6 |
عام استعمالات
PIC18F8410-E/PT کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Manufacturing Equipment Controllers, Instrumentation and Monitoring, Data Acquisition Front-Ends, Power Conditioning and Battery Management, Environmental Monitoring Sensor Hubs, Telecom and Consumer White Goods.
Industrial Manufacturing Equipment Controllers
The PIC18F8410-E/PT's 16 KB of Flash and 70 I/O pins make it ideal for industrial manufacturing equipment controllers. With 25 MIPS performance and an extended -40 °C to +125 °C temperature grade, it directly drives relays, opto-isolated I/O and H-bridges while running a deterministic control loop. The PIC18F8410's 10-bit ADC samples analog signals from current shunts and temperature sensors in real time, allowing the firmware to regulate motor speed and detect fault conditions. Placed on a 5 V logic rail with adequate decoupling, the part replaces larger 16-bit MCUs in simple PLCs. Source: Microchip PIC18F8410 product page.
تجویز کردہ
Instrumentation and Monitoring
For instrumentation and monitoring systems the PIC18F8410-E/PT offers two USART channels for digital sensors, an MSSP peripheral for SPI or I2C front-ends and a 10-bit ADC for analog signal acquisition. The 25 MHz clock enables real-time sampling of slow-moving process variables such as pressure, flow and temperature without saturating the CPU. The wide 4.2-5.5 V supply tolerance lets designers power the board directly from a regulated 5 V analog rail. Compared with smaller PIC18F parts, the 80-pin TQFP exposes more parallel I/O for keypad and alarm-indicator panels.
تجویز کردہ
Data Acquisition Front-Ends
The PIC18F8410-E/PT serves as the host MCU in multi-channel data acquisition front-ends. Its 70 I/O pins scan large sensor arrays directly, while the 10-bit ADC converts analog signals at up to 30 ksps, which is adequate for slow industrial telemetry. Firmware can stream captured data over UART to a host PC or store burst captures in the 768-byte RAM buffer. The PIC18F8410's 80-pin TQFP package exposes the parallel PORTD/PORTE/PORTJ bus used to drive external FIFO memory or LCD displays.
تجویز کردہ
Power Conditioning and Battery Management
The PIC18F8410-E/PT is well suited to power conditioning boards where it implements MPPT, charge profiling or PWM inverter control. Its PWM modules generate up to 25 MHz timer resolution, which translates to fine-grained switching-frequency control, while the 10-bit ADC measures battery voltage and current with adequate resolution for state-of-charge estimation. The wide 4.2-5.5 V supply range lets the part run directly from a 5 V auxiliary rail while controlling higher-voltage rails through drivers. Compared with smaller PIC18F parts, the 80-pin TQFP provides enough I/O for status LEDs and protection signals.
تجویز کردہ
Environmental Monitoring Sensor Hubs
Environmental monitoring hubs benefit from the PIC18F8410-E/PT's high I/O count and low-power NanoWatt modes. The MCU aggregates data from multiple SPI or I2C sensors (temperature, humidity, gas) and forwards payloads over UART or to a wireless co-processor. The -40 to +125 °C extended grade ensures reliable operation in outdoor enclosures, while the 16 KB Flash comfortably fits Modbus or custom telemetry stacks. The 80-pin TQFP allows easy integration with parallel-character LCDs for local display.
تجویز کردہ
Telecom and Consumer White Goods
The PIC18F8410-E/PT is also at home in telecom line cards and consumer white goods such as washing machines and induction cookers. The 70 I/O lines drive keypads, seven-segment displays, relays and buzzer drivers, while the 16 KB Flash holds user-interface firmware and small RTOS kernels. The extended temperature grade handles the heat of a motor-compressor compartment and the wide supply range tolerates rectified mains-derived rails. Pair the MCU with a Microchip CAN or LIN transceiver for appliance networking.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC18F8410-E/PT — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC18F6410-E/PT | PIC18F8410-I/PT | PIC18F8310-I/PT | PIC18F8722-I/PT | PIC18F8723-E/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 80-pin TQFP (PT), 12x12 mm | 80-pin TQFP (PT) - same | 80-pin TQFP (PT) - same | 80-pin TQFP (PT) - same | 80-pin TQFP (PT) - same | 80-pin TQFP (PT) - same |
| Program Memory (Flash) | 16 KB | 8 KB | 16 KB | 8 KB | 128 KB | 128 KB |
| RAM | 768 bytes | 768 bytes | 768 bytes | 768 bytes | 3840 bytes | 3840 bytes |
| Maximum Clock Speed | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| Operating Temperature | -40 °C to +125 °C (E) | -40 °C to +125 °C (E) | -40 °C to +85 °C (I) | -40 °C to +85 °C (I) | -40 °C to +85 °C (I) | -40 °C to +125 °C (E) |
| Supply Voltage | 4.2 V to 5.5 V | 4.2 V to 5.5 V | 4.2 V to 5.5 V | 4.2 V to 5.5 V | 4.2 V to 5.5 V | 4.2 V to 5.5 V |
| I/O Pins | 70 | 70 | 70 | 70 | 70 | 70 |
| ADC | 10-bit | 10-bit | 10-bit | 10-bit | 10-bit | 10-bit |
اہم امتیازی خصوصیات
- Industrial temperature grade 'E' on the PIC18F8410-E/PT (بمقابلہPIC18F8410-I/PT)
- 16 KB Flash vs 8 KB on PIC18F8310-I/PT (بمقابلہPIC18F8310-I/PT)
- Smaller 16 KB footprint at lower cost than PIC18F8722-I/PT (بمقابلہPIC18F8722-I/PT)
ڈیزائن نوٹس
Place a 100 nF ceramic decoupling capacitor next to each of the four VDD/VSS pairs on the PIC18F8410-E/PT, plus a single 10 µF tantalum or aluminum-polymer bulk capacitor near the MCU supply pin. The device runs on a 4.2 V to 5.5 V rail; below 4.2 V the brown-out reset (BOR) may trigger depending on BORV configuration bits, so verify the BOR threshold against your regulated rail tolerance. Source: Microchip PIC18F8410 datasheet and Microchip MPLAB Tips & Tricks application note.
Follow the Microchip TQFP-80 recommended land pattern with thermal relief vias under any exposed pad footprint variant. Keep oscillator traces short (<10 mm) and shield them with a grounded guard ring to reduce EMI on the 25 MHz fundamental. Use a 4-layer stack-up with a continuous ground plane beneath the MCU to keep digital return currents away from the analog AVdd/AVss pair driving the 10-bit ADC. Source: Microchip TQFP-80 land-pattern reference and Microchip analog design guidelines.
Configuration bits must be set explicitly before code-lock - failing to do so can lock the device with the wrong oscillator source or BOR threshold. Do not exceed 5.5 V on any pin, including during in-circuit serial programming (ICSP) where VPP can momentarily reach 13 V; use a Microchip-recommended ICSP circuit. Always include a 10 kΩ pull-up on MCLR#/VPP and a series resistor if VPP is driven from a long cable. Source: Microchip PIC18F8410 datasheet, programming specification section.
تعمیل کی معلومات
RoHS and lead-free status confirmed by Microchip product page and DigiKey listings. Halogen-free status is not explicitly stated in the verified data and is marked unknown.
