Microchip Technology

PIC24EP32MC204-I/MV - 70 MIPS 32KB Motor Control MCU

MPN: PIC24EP32MC204-I/MV ✓ فعال
3 V to 3.6 V Vdss 48-UQFN (6 x 6 mm) Package 32 KB (10.7K x 24 bits) Memory
MOQ: 1 |

PIC24EP32MC204-I/MV جائزہ

The Microchip Technology PIC24EP32MC204-I/MV is a 16-bit PIC24E motor-control microcontroller with 70 MIPS performance, 32 KB of internal flash, 4 KB of RAM, 35 I/O pins, and a 48-UQFN 6 x 6 mm package. It operates from 3 V to 3.6 V and combines a 9-channel 10-bit/12-bit ADC with internal operational amplifiers, communication peripherals, and motor-control features for precision, energy-efficient designs.

A motor-control microcontroller is a specialized microcontroller that executes control algorithms, samples analog feedback, drives power-stage signals, and manages communications within an embedded system. The PIC24EP32MC204 belongs to the PIC24E family and extends that hierarchy to motor-control MCUs with dedicated peripherals, high-speed processing, and precision analog resources. This combination reduces the need for discrete analog front ends while keeping real-time control behavior deterministic.

The 70 MIPS DSP-oriented core provides the throughput needed for current sensing, speed control, and fault handling. Its 32 KB flash supports application code and fixed-point control routines, while 4 KB of RAM accommodates working variables and control-loop data. The integrated 9-channel ADC resolves current or position feedback at 10-bit or 12-bit levels, and the internal operational amplifiers help condition sensor signals close to the source.

The device provides I2C, IrDA, LIN, SPI, UART, and USART interfaces according to the manufacturer product listing. These interfaces support motor-control network management, position-sensor communication, debugging, and service diagnostics. A dedicated 35-I/O configuration also allows external bridge drivers, gate-driver logic, protection inputs, and status indicators to be connected without extensive multiplexing.

Typical applications include BLDC and PMSM controllers, compact fan and pump controllers, appliance drive systems, robotics, and industrial motion modules. Its 3 V to 3.6 V supply range suits low-voltage embedded systems, while the small 48-UQFN package supports compact power-conversion boards where exposed-pad thermal management is required.

Design the PCB around the exposed thermal pad, decoupling requirements, analog grounding, and high-current switching layout specified in the manufacturer datasheet. Keep sensor traces away from gate-drive and motor-switching nodes, and validate current-sense calibration across the full temperature range before production release.

This page consolidates package, memory, analog, and interface specifications with practical motor-control design notes, a drop-in comparison set, and application-focused guidance for engineers evaluating the PIC24EP32MC204-I/MV.

کے لیے ڈراپ اِن متبادل PIC24EP32MC204-I/MV — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC24EP32MC204-I/MV (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Operating Temperature, Package, ADC, CTMU, Comparators.

Microchip Technology
Operating Temperature: -40 C to +85 C (industrial, 'I')
Package: 48-pin UQFN (6x6 mm) with exposed pad
ADC: 10/12-bit, up to 9 channels
Microchip Technology
Operating Temperature: -40C to +85C (Industrial, 'I')
Package: 48-pin UQFN (6x6 mm) with exposed pad
CTMU: Yes

PIC24EP32MC203-I/MV

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 48-UQFN (6 x 6 mm)
Same 48-UQFN motor-control footprint; lower-memory PIC24EP32MC203 configuration reduces program-memory headroom relative to the 32 KB PIC24EP32MC204.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

PIC24EP32MC202-I/MV

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 48-UQFN (6 x 6 mm)
Same 48-UQFN motor-control footprint; reduced flash and RAM capacity versus the 32 KB/4 KB PIC24EP32MC204.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

PIC24EP32MC201-I/MV

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 48-UQFN (6 x 6 mm)
Same 48-UQFN motor-control footprint; smallest memory configuration in this candidate group, limiting firmware storage relative to the 32 KB PIC24EP32MC204.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

PIC24EP32MC204-I/MV زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type 16-bit motor-control microcontroller
Series PIC24E
Maximum Instruction Throughput 70 MIPS
Internal Flash Memory 32 KB (10.7K x 24 bits)
Internal RAM 4 KB
General-Purpose I/O 35 pins
ADC 9-channel, 10-bit/12-bit
آپریٹنگ سپلائی وولٹیج 3 V to 3.6 V
آپریٹنگ درجہ حرارت -40°C to +85°C
Internal Operational Amplifiers Integrated
Programmable Gain Amplifier Integrated
Serial Interfaces I2C, IrDA, LIN, SPI, UART, USART
پیکیج 48-UQFN (6 x 6 mm)
ماؤنٹنگ ٹائپ Surface mount
Temperature Grade Industrial, -40°C to +85°C

PIC24EP32MC204-I/MV 48-uqfn (6 x 6 mm) پن کنفیگریشن گائیڈ

PIC24EP32MC204-I/MV (48-uqfn (6 x 6 mm) پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

PIC24EP32MC204-I/MV کے لیے 48-uqfn (6 x 6 mm) پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں PIC24EP32MC204-I/MV.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

PIC24EP32MC204-I/MV کے لیے موزوں ہے 6 ایپلیکیشنs: BLDC and PMSM Motor Controllers, Low-Voltage Pump and Fan Drives, Robotics and Precision Motion Modules, Industrial Sensor and Actuator Nodes, Appliance and HVAC Motor Systems, Battery-Powered Portable Equipment.

⚡

BLDC and PMSM Motor Controllers

The PIC24EP32MC204-I/MV fits compact brushless motor drives that require fast current-loop execution and accurate phase-feedback acquisition. Its 70 MIPS 16-bit core provides deterministic control throughput, while the 9-channel 10-bit/12-bit ADC can monitor phase currents, DC-bus voltage, and position references. Internal operational amplifiers and the PGA can condition low-level current-sense signals close to the sensing element. With 35 I/O pins, the controller can also operate bridge gate drivers, fault inputs, and hall sensors. The 48-UQFN footprint helps reduce board area in appliance, pump, and fan drives.

🏭

Low-Voltage Pump and Fan Drives

The PIC24EP32MC204-I/MV is suitable for efficient low-voltage pump and fan drives where dynamic regulation, fault detection, and compact packaging are important. The 70 MIPS core executes speed-control and acceleration profiles, while the 9-channel ADC supports motor-current, supply-voltage, and thermal monitoring. A 3 V to 3.6 V operating range fits 3.3 V motor-control systems, and the integrated analog resources reduce board area. Its 35 I/O pins can connect an external MOSFET bridge, hall sensors, and protection circuitry. The 48-UQFN 6 x 6 mm package supports compact appliances and equipment-mounted fan modules.

🤖

Robotics and Precision Motion Modules

The PIC24EP32MC204-I/MV can serve as the motion-control core in robotics arms, positioning stages, and compact mobile mechanisms. Its 70 MIPS processing capacity supports interpolation, trajectory shaping, current control, and multi-axis supervisory logic, while 32 KB of flash and 4 KB of RAM provide space for control code and parameter tables. The internal ADC and operational amplifiers support current and position feedback, and the available I2C, SPI, UART, and USART interfaces can connect encoders, sensors, and service ports. The small 48-UQFN package is useful when the controller must fit beside a compact power stage.

🏭

Industrial Sensor and Actuator Nodes

The PIC24EP32MC204-I/MV is useful for industrial nodes that combine analog measurement, local actuation, and network communications. Its 9-channel ADC can acquire sensor and actuator feedback at 10-bit or 12-bit resolution, while the integrated operational amplifiers assist with conditioning. The 70 MIPS core can run measurement compensation and local control logic without an additional processor. I2C, SPI, UART, USART, LIN, and IrDA options enable connections to industrial sensors, actuators, and service interfaces. A 3.3 V supply range and 48-UQFN package support compact, board-level automation modules.

🔧

Appliance and HVAC Motor Systems

The PIC24EP32MC204-I/MV suits appliance and HVAC systems that need reliable low-speed motor regulation in a small controller area. Its 70 MIPS core can implement efficient field-oriented or scalar control, and the ADC can monitor motor current, temperature, and supply voltage for protection. Integrated analog resources simplify low-level feedback conditioning, while the 35 I/O pins accommodate relays, bridge drivers, and diagnostic switches. Serial interfaces allow service technicians to access operating data or update configuration. The 48-UQFN package accommodates space-constrained appliances and compact air-handling assemblies.

📱

Battery-Powered Portable Equipment

The PIC24EP32MC204-I/MV can support small battery-powered mechanisms that require deterministic control and efficient mixed-signal sensing. The 3 V to 3.6 V operating range is compatible with regulated 3.3 V power systems, and the 70 MIPS core provides computational margin for current control and load balancing. Its 9-channel ADC and internal analog blocks reduce the component count needed for sensor conditioning. Low-pin-count communication options support configuration, diagnostics, or external accessory modules. The compact 48-UQFN package is particularly useful where the motor controller must share a board with a battery charger and protection circuitry.

What is the PIC24EP32MC204-I/MV used for?
The PIC24EP32MC204-I/MV is used to implement precise, energy-efficient motor-control systems, including BLDC, PMSM, pump, and fan drives. Its 70 MIPS 16-bit core, 9-channel 10-bit/12-bit ADC, integrated operational amplifiers, and internal programmable gain amplifier support high-speed current sensing and closed-loop control. The 35 I/O pins provide connections for gate drivers, protection inputs, sensors, and status indicators within a compact 48-UQFN footprint.
What are the key specifications of PIC24EP32MC204-I/MV?
The PIC24EP32MC204-I/MV combines a 70 MIPS 16-bit core with 32 KB of flash, 4 KB of RAM, 35 I/O pins, and a 9-channel 10-bit/12-bit ADC. It operates from 3 V to 3.6 V and includes internal operational amplifiers, a PGA, and I2C, IrDA, LIN, SPI, UART, and USART interfaces. The device is packaged in a 48-UQFN measuring 6 x 6 mm for compact motor-control and embedded control designs.
Where can I download the PIC24EP32MC204-I/MV datasheet?
The official datasheet and product resources are available through the Microchip PIC24EP32MC204 product page. Use the manufacturer's pin-description table, electrical-characteristics tables, and package drawings when assigning PCB nets or calculating timing margins. The -I/MV ordering suffix identifies the industrial-temperature 48-UQFN package option, while the base PIC24EP32MC204 documentation covers the underlying device family.
Where is the PIC24EP32MC204-I/MV pinout located?
The authoritative pinout appears in the package and pin-description diagrams in the Microchip PIC24EP32MC204 datasheet. The -I/MV variant uses a 48-UQFN 6 x 6 mm package, so the physical land pattern must follow that drawing rather than the 44-pin TQFP or VTLA variants of the same device. Verify pin multiplexing and exposed-pad connection requirements directly against the pin-description table before releasing a PCB layout.
What is the memory configuration of PIC24EP32MC204-I/MV?
The PIC24EP32MC204-I/MV provides 32 KB of internal flash, organized as 10.7K x 24 bits, and 4 KB of internal RAM. The 32 KB flash region accommodates control firmware, parameter tables, and communication routines. Its 70 MIPS execution rate supports deterministic fixed-point control loops, while the 4 KB RAM is intended for working variables, sampled data, and short computational buffers.
Does PIC24EP32MC204-I/MV have internal op amps and a PGA?
Yes, the PIC24EP32MC204-I/MV includes internal operational amplifiers and an integrated programmable gain amplifier. These resources can condition low-level current or position-feedback signals without relying on a complete external analog front end. The ADC provides nine channels at 10-bit or 12-bit resolution, allowing the internal amplifiers to feed precision control loops. Verify channel counts, gain settings, and analog-input limits in the manufacturer electrical tables.
How do PIC24EP32MC204-I/MV and PIC24EP32MC204-I/ML differ?
PIC24EP32MC204-I/MV is supplied in a 48-UQFN 6 x 6 mm package, while PIC24EP32MC204-I/ML uses a 44-TQFP 10 x 10 mm package. Both belong to the same PIC24EP32MC204 family and provide the core motor-control function, so they are functional alternatives rather than pin-for-pin drop-ins. A PCB designed for the UQFN land pattern cannot accept the TQFP device without a layout revision.
Can PIC24EP32MC204-I/PT replace PIC24EP32MC204-I/MV?
No, PIC24EP32MC204-I/PT is not a pin-to-pin replacement for PIC24EP32MC204-I/MV because their packages differ. The -I/MV part uses a 48-UQFN 6 x 6 mm package, while the -I/PT part uses a 44-TQFP 10 x 10 mm package. Although both provide the same 70 MIPS, 32 KB flash motor-control family, they require different footprints, pad counts, and PCB layouts.
What is the best drop-in replacement for PIC24EP32MC204-I/MV?
The closest drop-in choices are Microchip PIC24EP32MC203-I/MV, PIC24EP32MC202-I/MV, and PIC24EP32MC201-I/MV because they retain the 48-UQFN motor-control footprint while providing different memory configurations. Exact firmware, peripheral, and timing compatibility must be confirmed against the Microchip cross-reference search before substitution. No verified cross-brand pin-compatible replacement was identified, so a redesign is required if a second source from another manufacturer is mandatory.
When should I choose PIC24EP32MC204-I/MV over a smaller PIC24EP32MC20x device?
Choose PIC24EP32MC204-I/MV when the design needs the family's full 32 KB of flash, 4 KB of RAM, and maximum processing headroom for complex current loops or multi-axis control. Smaller PIC24EP32MC20x variants can be attractive when algorithm memory requirements are modest. Because the devices share a compatible package approach, memory headroom rather than footprint should usually drive the final choice.
Is PIC24EP32MC204-I/MV suitable for a BLDC motor controller?
Yes, PIC24EP32MC204-I/MV is suitable for a BLDC motor controller requiring fast computation and close analog measurement. Its 70 MIPS core can execute current and speed control routines, while the 9-channel ADC and internal amplifiers support phase-current and bus-voltage feedback. The 48-UQFN package also helps reduce board area in compact fans, pumps, appliances, and industrial motion modules.
What communications interfaces are available on PIC24EP32MC204-I/MV?
The PIC24EP32MC204-I/MV includes I2C, IrDA, LIN, SPI, UART, and USART interfaces. LIN and UART are useful for motor-control networking and service diagnostics, while I2C and SPI support external sensors, position encoders, memory, and power-management components. IrDA can support short-range infrared communication where the application requires it. Confirm the peripheral instance and pin multiplexing for each function in the datasheet pin tables.
How do I design the PCB around the PIC24EP32MC204-I/MV 48-UQFN package?
The PCB layout must use the manufacturer land pattern for the 48-UQFN 6 x 6 mm package and provide the exposed-pad connection specified for thermal and electrical performance. Place input and bulk-decoupling capacitors close to their associated supply pins, keep analog sensor routing away from switching nodes, and provide a quiet ground return for current-sense signals. Validate the final layout with the Microchip package drawing and electrical-characteristics guidance.
Where can I buy PIC24EP32MC204-I/MV and check current availability?
Use the Request a Quote form on this page to request the current price, stock status, minimum order quantity, and lead time for PIC24EP32MC204-I/MV. The manufacturer part number includes the industrial temperature range and 48-UQFN package code, so include the complete suffix in any quote request to prevent an order for the 44-pin TQFP or VTLA variant.
What is the price of PIC24EP32MC204-I/MV?
Current pricing for PIC24EP32MC204-I/MV is handled through the Request a Quote form on this page. Submit the complete 48-UQFN ordering suffix with your requested quantity and delivery schedule so the quote reflects the correct package, temperature grade, and volume break. Distributor listings and promotional prices change frequently, while a dated quote provides a consistent purchasing reference.
What is the lead time for PIC24EP32MC204-I/MV?
Request the current lead time through the Request a Quote form on this page. Lead time depends on available factory inventory, production scheduling, package volume, and the ordered quantity, so it should be confirmed against a current supply commitment rather than inferred from general distributor availability. Specify whether full reels, partial reels, or cut tape are required when submitting the request.
Is PIC24EP32MC204-I/MV currently in stock?
The current availability status for PIC24EP32MC204-I/MV should be confirmed through the Request a Quote form on this page. Provide the required quantity, target date, and packaging preference to obtain a supply response for the exact 48-UQFN ordering suffix. Because availability can change rapidly and factory allocation varies by volume, use the confirmed response rather than a static listing for production planning.

کے لیے انجینئرنگ ریفرنس ڈیٹا PIC24EP32MC204-I/MV — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose PIC24EP32MC204-I/MV when the design requires the full 32 KB flash and 4 KB RAM available in the compared 48-UQFN PIC24EP32MC20x group. Its 70 MIPS core, integrated operational amplifiers, PGA, and 9-channel ADC make it the strongest option when motor-control firmware and analog conditioning are the main constraints. PIC24EP32MC203-I/MV is reasonable when moderate memory savings matter and all required peripherals remain available. PIC24EP32MC202-I/MV or PIC24EP32MC201-I/MV suit simpler algorithms, but firmware capacity becomes the limiting factor. The 44-TQFP PIC24EP32MC204-I/PT and I/ML versions are functional alternatives rather than drop-ins because their footprints differ. No verified cross-brand, pin-compatible replacement was identified, so a second-source strategy requiring a different manufacturer will normally require board redesign and firmware requalification.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ PIC24EP32MC203-I/MV PIC24EP32MC202-I/MV PIC24EP32MC201-I/MV
Package 48-UQFN (6 x 6 mm) 48-UQFN (6 x 6 mm) 48-UQFN (6 x 6 mm) 48-UQFN (6 x 6 mm)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Architecture 16-bit PIC24E motor-control MCU 16-bit PIC24E motor-control MCU 16-bit PIC24E motor-control MCU 16-bit PIC24E motor-control MCU
Maximum Performance 70 MIPS 70 MIPS 70 MIPS 70 MIPS

اہم امتیازی خصوصیات

  • Provides the highest memory configuration in the compared PIC24EP32MC20x-MV group (بمقابلہPIC24EP32MC203-I/MV)
  • Combines control processing with integrated analog conditioning (بمقابلہPIC24EP32MC202-I/MV)
  • Supports multiple dedicated communication paths (بمقابلہPIC24EP32MC201-I/MV)

ڈیزائن نوٹس

The 48-UQFN package has an exposed thermal pad that must be connected to the ground plane according to the manufacturer package drawing. Estimated: thermal performance depends directly on exposed-pad area, copper coverage, board layers, and ambient temperature, so no fixed junction-rise figure should be assumed. Provide uninterrupted copper beneath the device and keep thermal vias within the recommended pad region to improve heat spreading from the controller and adjacent regulator circuitry.

Keep analog current-sense, position-sensor, and voltage-sense traces short and isolated from PWM, gate-drive, and motor-switching nets. Route high-current motor paths directly through the power stage rather than over controller ground areas. The internal amplifiers and PGA help reduce analog front-end size, but their inputs still require careful grounding and shielding from switching edges to preserve measurement accuracy.

Place decoupling capacitance directly at the device supply pins and follow the manufacturer guidance for bulk capacitance near the 3.3 V rail entry point. Estimate the average controller current from the operating mode, peripheral loading, and clock activity before sizing the regulator, then check its transient response against the ADC sampling and PWM switching events. This rail must remain within 3 V to 3.6 V under worst-case load and temperature.

Do not substitute the 44-pin TQFP or VTLA package variants for the 48-UQFN -I/MV without a PCB redesign. Verify the complete ordering suffix, exposed-pad connection, pin multiplexing, and peripheral instance mapping before programming. A same-family device with less flash or RAM can share the footprint, but firmware size, initialization sequence, and peripheral availability must be checked against the manufacturer cross-reference results.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The industrial-temperature grade is indicated by the -I suffix, with a specified operating range of -40°C to +85°C. No explicit RoHS, REACH, halogen-free, or conflict-minerals statement was identified for this exact ordering code.

متعلقہ تلاشیں

PIC24EP32MC204-I/MV datasheet PIC24EP32MC204-I/MV pinout PIC24EP32MC204-I/MV specifications PIC24EP32MC204-I/MV price PIC24EP32MC204-I/MV stock PIC24EP32MC204-I/MV equivalent PIC24EP32MC204-I/MV replacement PIC24EP32MC204-I/MV 48-UQFN PIC24EP32MC204-I/MV motor controller PIC24EP32MC204-I/MV vs PIC24EP32MC204-I/PT Microchip PIC24EP32MC204-I/MV PIC24EP32MC204 70 MIPS MCU

متعلقہ اجزاء اور اصطلاحات

Microchip Technology PIC24EP32MC204-I/MV PIC24EP32MC204 PIC24EP32MC203-I/MV PIC24EP32MC202-I/MV PIC24EP32MC201-I/MV PIC24EP32MC204-I/PT PIC24EP32MC204-I/ML PIC24E motor-control microcontroller 16-bit microcontroller DSP instruction set 70 MIPS 32 KB flash memory 4 KB SRAM 10-bit ADC 12-bit ADC internal operational amplifier programmable gain amplifier 48-UQFN QFN family surface-mount package BLDC motor control PMSM control industrial temperature grade
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں