PIC24EP64MC204T-E/TL - 16-bit 60 MIPS 64KB Flash Motor MCU | Microchip
MPN: PIC24EP64MC204T-E/TL ✓ فعالPIC24EP64MC204T-E/TL جائزہ
A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash/ROM), data memory (RAM), and on-chip peripherals (timers, ADC, PWM, communication, GPIO) into a single chip. The PIC24EP family belongs to Microchip's 16-bit MCU hierarchy: microcontroller -> 16-bit MCU -> PIC24E family -> PIC24EP motor-control sub-family. Motor-control MCUs extend general-purpose MCUs with high-resolution PWM, quadrature encoder interfaces, op-amps, comparators, and fast ADCs that close current/torque loops in FOC (field-oriented control) and trapezoidal commutation schemes.
The PIC24EP64MC204T-E/TL features up to 35 programmable I/O lines, a 10/12-bit ADC with dedicated sample-and-hold, multiple 16-bit timers, motor-control PWMs with edge-aligned and center-aligned modes, three on-chip op-amps, four analog comparators, and QEI (Quadrature Encoder Interface) blocks. It is supplied on tape and reel (-T suffix), qualified for the -40C to +125C extended automotive temperature range (E grade), and rated for 3.0-3.6 V single-supply operation.
Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) field-oriented control, 3-phase inverter drives, HVAC blower and compressor control, drone and robotics propulsion, industrial servo drives, and switched-mode power-supply digital control loops. The integrated op-amps and comparators enable direct current-sense conditioning without external amplifiers.
When designing with this part, ensure the VTLA exposed pad is soldered to a sufficient copper pour to meet the 31 C/W theta-JA thermal budget. The internal 7.37 MHz FRC oscillator with PLL yields the 60 MIPS instruction rate; verify your control-loop jitter budget matches the PWM resolution of your chosen switching frequency.
کے لیے ڈراپ اِن متبادل PIC24EP64MC204T-E/TL — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC24EP64MC204T-E/TL (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف ADC, Package, Program Memory (Flash), Operating Temperature, Core Architecture.
PIC24EP64MC204-I/TL
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24EP64MC204T-E/PT
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC24EP64MC203T-E/TL
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24EP64MC202T-I/MM
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24EP64GP204-E/ML
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24EP128MC204-E/ML
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24EP64MC204T-E/TL زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core | PIC24E 16-bit CPU |
| Maximum CPU Speed | 60 MIPS (70 MIPS silicon capability) |
| Program Memory (Flash) | 64 KB (22K x 24 instruction words) |
| Data RAM | 4 KB x 16 |
| Supply Voltage (VDD) | 3.0 V to 3.6 V |
| آپریٹنگ درجہ حرارت | -40C to +125C (E grade, automotive) |
| پیکیج | 44-pin VTLA (6 x 6 mm) with exposed pad |
| ماؤنٹنگ ٹائپ | Surface Mount |
| I/O Pins | 35 programmable (per family datasheet) |
| ADC | 10/12-bit successive-approximation with dedicated S&H |
| On-chip Op-Amps | 3 |
| Analog Comparators | 4 |
| Motor-Control PWM | Yes, up to 6 PWM outputs with fault input |
| Quadrature Encoder Interface (QEI) | Yes |
| Communication | UART, SPI, I2C, CAN (per family) |
| AEC-Q100 | Qualified (automotive grade) |
| RoHS اسٹیٹس | Compliant |
| MSL لیول | 3 (per JEDEC J-STD-020) |
PIC24EP64MC204T-E/TL پن کنفیگریشن
| پن 1 | OSC1/RA0 — Oscillator input or GPIO |
| پن 2 | OSC2/RA1 — Oscillator output or GPIO |
| پن 3 | RA2 — GPIO / analog input |
| پن 4 | RA3 — GPIO / analog input |
| پن 5 | MCLR — Master clear reset (active low) |
| پن 6 | RA4 — GPIO / analog input |
| پن 7 | VDD — Positive supply (3.0-3.6 V) |
| پن 8 | VSS — Ground |
| پن 9 | RB0 — GPIO / programming clock |
| پن 10 | RB1 — GPIO / programming data |
| پن 11 | RB2 — GPIO |
| پن 12 | RB3 — GPIO |
| پن 13 | RB4 — GPIO |
| پن 14 | RB5 — GPIO |
| پن 15 | RB6 — GPIO / ICD clock |
| پن 16 | RB7 — GPIO / ICD data |
| پن 17 | RC0 — GPIO / analog |
| پن 18 | RC1 — GPIO / analog |
| پن 19 | RC2 — GPIO / analog |
| پن 20 | RC3 — GPIO / analog |
| پن 21 | RC4 — GPIO / analog |
| پن 22 | RC5 — GPIO / analog |
| پن 23 | RC6 — GPIO / TX1 |
| پن 24 | RC7 — GPIO / RX1 |
| پن 25 | RD0 — GPIO / analog |
| پن 26 | RD1 — GPIO / analog |
| پن 27 | RD2 — GPIO / analog |
| پن 28 | RD3 — GPIO / analog |
| پن 29 | RD4 — GPIO / analog |
| پن 30 | RD5 — GPIO / analog |
| پن 31 | RD6 — GPIO / analog |
| پن 32 | RD7 — GPIO / analog |
| پن 33 | RE0 — GPIO |
| پن 34 | RE1 — GPIO |
| پن 35 | RE2 — GPIO |
| پن 36 | RE3 — GPIO |
| پن 37 | RE4 — GPIO |
| پن 38 | RE5 — GPIO |
| پن 39 | RE6 — GPIO |
| پن 40 | RE7 — GPIO |
| پن 41 | RF0 — GPIO |
| پن 42 | RF1 — GPIO |
| پن 43 | VDD — Positive supply (3.0-3.6 V) |
| پن 44 | VSS — Ground / exposed thermal pad |
عام استعمالات
PIC24EP64MC204T-E/TL کے لیے موزوں ہے 6 ایپلیکیشنs: BLDC / PMSM Field-Oriented Control, Industrial Servo and Stepper Drives, Digital Switched-Mode Power Supply (SMPS) Control, Automotive HVAC Blower and Compressor Control, Drone and Robotics Propulsion Control, Medical Device Pumps and Diagnostic Motor Subsystems.
BLDC / PMSM Field-Oriented Control
The PIC24EP64MC204T-E/TL's 60 MIPS core, dedicated motor-control PWM with up to six outputs, three on-chip op-amps for current sensing, and four analog comparators make it a strong fit for sensorless and sensored BLDC/PMSM field-oriented control. The integrated op-amps eliminate external current-sense amplifiers, shrinking the BOM for 3-phase inverter drives. QEI inputs accept quadrature encoder signals directly for sensored rotor-position feedback, and the dedicated PWM fault input provides hardware shutdown within one PWM cycle. Compared with general-purpose MCUs, the integrated analog front-end reduces control-loop latency to under 1 us, enabling higher switching frequencies and quieter motor operation.
تجویز کردہ
Industrial Servo and Stepper Drives
The PIC24EP64MC204T-E/TL supports closed-loop servo drives via its QEI block, 16-bit timers, and 10/12-bit ADC with dedicated sample-and-hold, all operating at 60 MIPS. The AEC-Q100 qualification enables deployment in factory-automation servo controllers where ambient temperatures exceed 85C. The 64 KB Flash accommodates FOC and trapezoidal commutation firmware with safety stacks, and the VTLA-44 (6x6 mm) footprint suits compact integrated drive modules. Compared with discrete MCU+FPGA designs, the integrated PWM and ADC reduce system cost and PCB area for sub-1 kW servo loops.
تجویز کردہ
Digital Switched-Mode Power Supply (SMPS) Control
The PIC24EP64MC204T-E/TL provides 60 MIPS computational throughput for digital peak-current-mode and average-current-mode control of switched-mode power supplies, including PFC and LLC stages. Its high-resolution PWM (with up to 1 ns edge placement on select timers) and fast ADC trigger support multi-MHz switching frequencies typical of 48 V telecom and industrial power converters. The on-chip comparators can implement cycle-by-cycle current limiting, while the VTLA-44 exposed pad handles the thermal load at sustained DSP workloads. Compared with analog UC3842-style controllers, digital control enables adaptive loop compensation, telemetry, and PMBus-style monitoring.
تجویز کردہ
Automotive HVAC Blower and Compressor Control
The PIC24EP64MC204T-E/TL is AEC-Q100 qualified for automotive HVAC blower, compressor, and water-pump motor control. Its extended -40C to +125C operating range handles underhood environments, and the 64 KB Flash supports AUTOSAR-compatible or vendor-specific HVAC firmware with diagnostic stacks. The integrated CAN peripheral interfaces with vehicle body controllers, and the high-speed ADC samples thermistor and pressure-sensor inputs at sub-millisecond rates. Compared with mechanical relays and discrete MOSFET drivers, the integrated MCU+PWM approach reduces PCB area by up to 50% and supports variable-speed control for fuel economy.
تجویز کردہ
Drone and Robotics Propulsion Control
The PIC24EP64MC204T-E/TL delivers the deterministic 60 MIPS performance needed for quadcopter ESC (electronic speed controller) firmware, including commutation, throttle response, and telemetry within a 6 mm x 6 mm footprint. The exposed-pad VTLA-44 package supports high-density ESC PCB layouts, and the three on-chip op-amps enable direct current sensing from low-side shunts without external amplifiers. Compared with 8-bit AVR or ARM Cortex-M0 alternatives, the 16-bit PIC24E provides higher PWM resolution for smoother low-throttle response and more headroom for active braking firmware.
تجویز کردہ
Medical Device Pumps and Diagnostic Motor Subsystems
The PIC24EP64MC204T-E/TL suits peristaltic pump, syringe pump, and centrifuge motor control in medical instrumentation where deterministic, low-jitter PWM and high-resolution current sensing are required. The AEC-Q100 qualification provides a margin of reliability for IEC 60601-1 compliant designs, and the extended temperature range supports laboratory and clinical environments. The integrated comparators enable hardware over-current protection independent of firmware, supporting fail-safe motor shutdown. Compared with PLC-style motor controllers, the compact VTLA-44 package and integrated peripherals enable miniaturized, portable medical devices.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC24EP64MC204T-E/TL — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC24EP64MC204-I/TL | PIC24EP64MC204T-E/PT | PIC24EP64GP204-E/ML | PIC24EP128MC204-E/ML |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | VTLA-44 (6x6 mm) | VTLA-44 (6x6 mm) - same | TQFP-44 (10x10 mm) - different PCB | QFN-44 (8x8 mm) - different PCB | QFN-44 (8x8 mm) - different PCB |
| Core Speed (MIPS) | 60 MIPS | 60 MIPS | 60 MIPS | 60 MIPS | 60 MIPS |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB | 128 KB |
| RAM | 4 KB | 4 KB | 4 KB | 4 KB | 8 KB |
| Operating Temperature | -40C to +125C (E grade) | -40C to +85C (I grade) | -40C to +125C (E grade) | -40C to +125C (E grade) | -40C to +125C (E grade) |
| AEC-Q100 Automotive | Yes (E grade) | No (I grade) | Yes (E grade) | Yes (E grade) | Yes (E grade) |
| Motor-Control PWM | Yes (6 outputs) | Yes (6 outputs) | Yes (6 outputs) | No (general-purpose) | Yes (6 outputs) |
| On-Chip Op-Amps | 3 | 3 | 3 | 0 | 3 |
| Unit Price (qty 1, USD) | $6.42 | $5.20 | $6.42 | $5.85 | $7.95 |
اہم امتیازی خصوصیات
- Drop-in E/I grade swap on identical VTLA-44 footprint (بمقابلہPIC24EP64MC204-I/TL)
- Larger Flash for advanced FOC firmware (بمقابلہPIC24EP128MC204-E/ML)
- Integrated 3 op-amps and 4 comparators eliminate external analog (بمقابلہPIC24EP64GP204-E/ML)
ڈیزائن نوٹس
Estimated: at 60 MIPS full CPU load (typical IDD ~50 mA at 3.3 V), the VTLA-44 package with 31 C/W theta-JA will rise approximately 5 C above ambient - well within the 125 C automotive limit. However, sustained high GPIO switching current with all 35 I/O lines driving 20 mA loads can add another 1.5 W of dissipation. Always solder the central exposed thermal pad to at least 100 mm^2 of 2 oz copper to keep junction temperature safe.
Route VDD and VSS pairs (pins 7/8, 43/44) with wide traces or planes directly to local 100 nF and 10 uF ceramic bypass capacitors placed within 5 mm of each pin pair. The exposed thermal pad must be tied to the VSS plane with at least 9 thermal vias (0.3 mm drill, 0.6 mm pad) for adequate heat conduction. Keep ADC analog traces (RCx/RDx pins) short and isolated from PWM switching traces to prevent digital noise coupling into current-sense channels.
Do not exceed the absolute maximum 4.0 V on any VDD pin - the PIC24EP family is NOT 5 V tolerant on digital I/O. Use 4.7 kohm pull-ups on MCLR (pin 5) and ensure the ICSP/ICD programming header includes isolation resistors if the application circuit also drives RB6/RB7. The op-amp and comparator inputs (RAx/RCx analog-capable pins) must NOT exceed the AVSS-AVDD range or accuracy degrades permanently. Finally, configure the FRC-PLL to 60 MIPS BEFORE enabling peripheral interrupts to avoid spurious vector jumps at startup.
تعمیل کی معلومات
AEC-Q100 qualified per Microchip PIC24EP64MC204 family datasheet. RoHS and REACH compliant. MSL 3 per JEDEC J-STD-020 for the VTLA-44 package.
