PIC24FJ1024GB610-I/PT - 1MB Flash, USB OTG 16-bit MCU | Microchip
MPN: PIC24FJ1024GB610-I/PT ✓ فعالPIC24FJ1024GB610-I/PT جائزہ
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The PIC24F family uses Microchip's modified Harvard 16-bit RISC architecture with 16 working registers, providing deterministic interrupt response and code density suitable for C and assembly development. Within the power-managed hierarchy, this part sits at the convergence of low-power MCU and USB-capable connectivity, making it a frequent choice for portable and connected devices.
Key features of the PIC24FJ1024GB610-I/PT include 1 MB (341.5K x 24) of dual-partition Flash supporting live updates and bootloader partitioning, 32 KB of SRAM, hardware USB OTG with on-chip transceiver, an integrated LCD driver, and a rich peripheral set including multiple UART, SPI, I2C, and 16-bit timers. The 100-pin TQFP package exposes the maximum pin count of the family, enabling access to most peripheral functions simultaneously.
The architecture combines a 16-bit data path with 24-bit instruction words, dual-partition Flash for field firmware upgrades without downtime, and code-guard security for IP protection. Integrated peripherals include a 16-channel 12-bit ADC, comparators, RTCC, and PWM. The eXtreme Low Power features (sleep, Deep Sleep, and Retention modes) make it suitable for battery-powered designs.
Typical applications include industrial control with graphical LCD HMIs, USB peripherals and embedded hosts, IoT gateways, portable medical devices, and automotive infotainment sub-systems. The combination of large Flash, USB OTG, and extensive peripherals supports designs previously requiring an external memory bus.
When designing with this device, plan Flash partitioning early to avoid costly layout or firmware rework. The 100-pin TQFP package provides generous I/O but requires a 4-layer PCB for clean USB routing; impedance-matched differential pairs are mandatory for USB-OTG compliance.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. The analysis aggregates DigiKey, Mouser, LCSC and Microchip's own published information to give engineers a single, decision-ready reference for the PIC24FJ1024GB610-I/PT.
کے لیے ڈراپ اِن متبادل PIC24FJ1024GB610-I/PT — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC24FJ1024GB610-I/PT (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف ADC, Package, Operating Temperature, Program Memory (Flash), USB.
PIC24FJ1024GA610-I/PT
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC24FJ1024GA610T-I/PT
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24FJ1024GA610-E/PT
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24FJ1024GB610-I/BG
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24FJ1024GA610-I/BG
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24FJ1024GB610-I/PT زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Family | PIC24F |
| Core Architecture | 16-bit Modified Harvard RISC (PIC) |
| CPU Speed | 32 MHz (16 MIPS) |
| Program Memory | 1 MB (341.5K x 24) Flash, dual-partition |
| SRAM | 32 KB |
| Operating Voltage | 2.0 V to 3.6 V |
| USB | USB 2.0 Full-Speed OTG with on-chip transceiver |
| ADC | 12-bit, up to 16 channels |
| Timers | Multiple 16-bit timers/counters |
| Communication | UART, SPI, I2C, USB OTG |
| I/O Count | Up to 85 digital I/O |
| آپریٹنگ درجہ حرارت | -40C to +85C (Industrial) |
| پیکیج | 100-pin TQFP (PT), 12x12 mm |
| ماؤنٹنگ ٹائپ | Surface Mount |
| MSL لیول | 3 (168 hours) |
| RoHS اسٹیٹس | Compliant |
| Code Security | Intermediate code-guard |
| LCD Driver | Integrated (segment LCD) |
| Low Power Modes | eXtreme Low Power, Sleep, Deep Sleep, Retention |
PIC24FJ1024GB610-I/PT 100-pin tqfp (pt), 12x12 mm پن کنفیگریشن گائیڈ
PIC24FJ1024GB610-I/PT (100-pin tqfp (pt), 12x12 mm پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں PIC24FJ1024GB610-I/PT.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
PIC24FJ1024GB610-I/PT کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Control with Graphical HMI, USB Peripherals and Embedded Hosts, IoT Gateway and Edge Devices, Portable Medical Devices, Automotive Infotainment Subsystems, Consumer Audio and USB Headsets.
Industrial Control with Graphical HMI
The PIC24FJ1024GB610-I/PT suits industrial HMIs because its 1 MB Flash stores large graphical assets, fonts, and multi-language strings while the integrated LCD driver simplifies the segment/character display interface. The 16 MIPS performance at 32 MHz supports smooth menu rendering and real-time control loop execution. Its 32 KB SRAM buffers touch input and fieldbus frames without external memory. Place the MCU between the keypad input matrix and the LCD, with the USB port optionally used for firmware updates.
تجویز کردہ
USB Peripherals and Embedded Hosts
The PIC24FJ1024GB610-I/PT is purpose-built for USB peripherals because it integrates a Full-Speed USB 2.0 OTG controller with on-chip transceiver, removing external analog and saving PCB real estate. The 1 MB Flash holds USB stacks such as Microchip's MLA while the 32 KB SRAM supports HID, CDC, and vendor-class frames. Power sequencing for VBUS sensing is built in, simplifying battery-powered and bus-powered designs. Place a 90.9 ohm differential pair from D+/D- to the USB connector with a ferrite bead on VBUS.
تجویز کردہ
IoT Gateway and Edge Devices
The PIC24FJ1024GB610-I/PT fits IoT edge nodes because its eXtreme Low Power modes reduce quiescent current to single-digit microamps between sensor reads, and the 16 MIPS core handles MQTT-SN, TLS, or custom protocol stacks resident in 1 MB Flash. Dual-partition Flash enables secure OTA updates without downtime. UART/SPI/I2C peripherals connect to radios, sensors, and EEPROMs. Use the Deep Sleep mode between scheduled wake-ups to extend battery life while the integrated RTCC tracks time accurately.
تجویز کردہ
Portable Medical Devices
The PIC24FJ1024GB610-I/PT supports portable medical applications because the eXtreme Low Power technology keeps battery use low while the 12-bit ADC and 16 analog channels capture multiple biosignals simultaneously. The 1 MB Flash stores FDA-required firmware with version history in dual partitions, while 32 KB SRAM buffers samples before transmission. The integrated LCD driver shows patient data on a segment display. Operate from two AA cells (3.0 V) within the 2.0-3.6 V supply range.
تجویز کردہ
Automotive Infotainment Subsystems
The PIC24FJ1024GB610-I/PT works in automotive infotainment sub-assemblies because its USB OTG port connects to phones for media playback while the integrated LCD driver controls the dashboard display and the 1 MB Flash holds audio codecs and UI assets. The 16 MIPS core manages CAN/LIN bridging via UART/SPI. The industrial -40C to +85C grade covers cabin environments; for under-hood use a Q-grade automotive part is required instead.
تجویز کردہ
Consumer Audio and USB Headsets
The PIC24FJ1024GB610-I/PT is well-matched to USB audio products because the integrated USB OTG controller streams 16-bit PCM at full speed without an external codec interface, while the 1 MB Flash holds USB Audio class firmware and DSP routines. The 32 KB SRAM manages audio buffers and the 16 MIPS core processes volume control and LED feedback. The low-power modes save battery life in wireless headsets. Use the on-chip PWM for LED status indication on the headset.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC24FJ1024GB610-I/PT — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC24FJ1024GA610-I/PT | PIC24FJ1024GA610T-I/PT | PIC24FJ1024GA610-E/PT | PIC24FJ1024GA610-I/BG |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-100 (PT) | TQFP-100 (PT) | TQFP-100 (PT) | TQFP-100 (PT) | TQFP-100 (PT) |
| Program Memory | 1 MB Flash | 1 MB Flash | 1 MB Flash | 1 MB Flash | 1 MB Flash |
| SRAM | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB |
| CPU Speed | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS |
| USB OTG | Yes (integrated) | No | No | No | No |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +125C (extended) | -40C to +85C |
اہم امتیازی خصوصیات
- Integrated USB 2.0 Full-Speed OTG with on-chip transceiver (بمقابلہPIC24FJ1024GA610-I/PT)
- Dual-partition Flash for live firmware updates (بمقابلہPIC24FJ1024GA610-E/PT)
- eXtreme Low Power technology with Retention Sleep (بمقابلہPIC24FJ1024GA610T-I/PT)
ڈیزائن نوٹس
Use a 4-layer PCB stack-up for the PIC24FJ1024GB610-I/PT USB-OTG design. Route D+ and D- as a 90 ohm differential pair with matched length within 150 mil, and place the ferrite bead on VBUS within 5 mm of the connector. Keep the 32 kHz crystal traces short and guarded by GND to minimize oscillator pickup. Place decoupling capacitors (0.1 uF and 1 uF) within 3 mm of each VDD pin.
Estimated: at 32 MHz full-speed CPU with USB active, core current is approximately 30-40 mA. Add 10 mA budget for USB transceiver and analog peripherals. Use a low-dropout regulator with at least 100 mA headroom; the 3.3 V rail must hold within +/-3% during USB suspend/resume transitions or the USB controller may detect an invalid VBUS level.
Do not assume the GA and GB variants are interchangeable in firmware; GA610 lacks the USB OTG registers and clock configuration bits. If USB is unused, choose the GA variant to save cost. Conversely, do not program a GA610 with GB610 USB initialization code - it will hang on missing register reads. Verify the silicon revision via the DEVSN field before flashing production firmware.
تعمیل کی معلومات
RoHS and REACH compliant per Microchip product page. Industrial temperature grade -40C to +85C; for AEC-Q100 automotive applications consult Microchip's PIC24 automotive part list.
