PIC24FJ64GA106-E/PT - 16-bit 32MHz MCU 64KB Flash | Microchip
MPN: PIC24FJ64GA106-E/PT ✓ فعالPIC24FJ64GA106-E/PT جائزہ
A microcontroller (MCU) is a single-chip computer containing a processor core, program and data memory, and programmable peripheral interfaces. The PIC24F family extends the classic PIC architecture into 16-bit modified Harvard territory with a wide 24-bit instruction word and 16-bit data path, enabling efficient C compilation while preserving the deterministic interrupt latency that made the PIC line famous. The PIC24FJ64GA106 sits inside Microchip's General Purpose Flash MCU portfolio, bridging small 8-bit PIC MCUs and the higher-end dsPIC family.
Key specifications include 64KB (22K x 24) self-programmable Flash, 8KB RAM, a 10-bit ADC with multiple conversion channels, two analog comparators, hardware Real-Time Clock Calendar (RTCC), and a 16-bit wide parallel master port (PMP) for external bus connectivity. The device operates across a 2.0V to 3.6V supply range and offers enhanced Flash program memory endurance. Peripheral Pin Select (PPS) remapping is supported on most digital I/O, enabling flexible PCB routing without re-spinning the silicon.
The PIC24FJ64GA106 is built on a low-power CMOS process and includes multiple power-saving modes including Sleep, Idle, and a deep Real-Time Clock-only mode that drops current draw below 100 nA. The integrated nanoWatt Technology features such as ultra-low-power wake-up sources, peripheral disable, and clock switching make this part particularly attractive for battery-backed and energy-harvesting products.
Typical applications include industrial sensor hubs, portable medical devices, USB peripherals, human-machine interface (HMI) panels, automotive body electronics, secure access controls, and general-purpose embedded control. The wide peripheral mix and generous RAM buffer also suit graphics TFT displays, multi-protocol gateways, and IoT edge nodes.
When designing with this MCU, allocate pin budget early because the 64-pin TQFP shares peripheral functions across pins and PPS remapping only resolves digital signals. Decoupling should follow Microchip's 100 nF near-VDD/VSS pairs plus a single bulk cap recommendation, and unused pins should be configured as outputs low to minimise parasitic current.
This page synthesises distributor pricing, pin-compatible drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, including parameter tables, design considerations, and field engineering guidance for the PIC24FJ64GA106-E/PT.
کے لیے ڈراپ اِن متبادل PIC24FJ64GA106-E/PT — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC24FJ64GA106-E/PT (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف ADC, Package, Core, Operating Temperature, Maximum CPU Speed.
PIC24FJ64GA106-I/PT
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24FJ128GA106-I/PT
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24FJ128GB106-I/PT
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24FJ64GA106-E/PT زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core | PIC24F 16-bit RISC |
| Program Memory | 64 KB Flash (22K x 24) |
| RAM | 8 KB |
| CPU Speed | 32 MHz (16 MIPS) |
| Supply Voltage (VDD) | 2.0 V to 3.6 V |
| آپریٹنگ درجہ حرارت | -40 C to +125 C (Extended) |
| I/O Pins | 53 |
| ADC | 10-bit, up to 16 channels |
| Analog Comparators | 2 |
| UART | 4 |
| SPI | 3 |
| I2C | 3 |
| Timers (16-bit / 32-bit) | 5 / 2 |
| Input Capture | 16-bit, 8 channels |
| Output Compare / PWM | 16-bit, 8 channels |
| Parallel Master Port (PMP) | Yes (16-bit) |
| Real-Time Clock (RTCC) | Yes |
| Peripheral Pin Select (PPS) | Yes |
| پیکیج | 64-TQFP (PT) 10x10 mm |
| ماؤنٹنگ ٹائپ | Surface Mount |
| Standby Current | < 100 nA (RTCC mode) |
| RoHS اسٹیٹس | Compliant |
| Lead-Free | Yes |
PIC24FJ64GA106-E/PT پن کنفیگریشن
| پن 1 | RP15/PWM1L/PMD15/CN12/RB15 — Remappable peripheral I/O, PWM output, PMP data, change notification |
| پن 2 | RP14/PWM2L/PMD14/CN11/RB14 — Remappable peripheral I/O, PWM output, PMP data |
| پن 3 | RP13/PMD13/CN10/RB13 — Remappable peripheral I/O, PMP data |
| پن 4 | RP12/PMD12/CN9/RB12 — Remappable peripheral I/O, PMP data |
| پن 5 | RP11/PMD11/CN8/RB11 — Remappable peripheral I/O, PMP data |
| پن 6 | RP10/PMD10/CN7/RB10 — Remappable peripheral I/O, PMP data |
| پن 7 | RP9/PMD9/CN6/RB9 — Remappable peripheral I/O, PMP data |
| پن 8 | RP8/PMD8/CN5/RB8 — Remappable peripheral I/O, PMP data |
| پن 9 | RP7/PMD7/CN4/RB7 — Remappable peripheral I/O, PMP data |
| پن 10 | RP6/PMD6/CN3/RB6 — Remappable peripheral I/O, PMP data |
| پن 11 | RP5/PMD5/CN2/RB5 — Remappable peripheral I/O, PMP data |
| پن 12 | RP4/PMD4/CN1/RB4 — Remappable peripheral I/O, PMP data |
| پن 13 | RP3/PMRD/CN0/RB3 — Remappable peripheral I/O, PMP read strobe |
| پن 14 | RP2/PMWR/RB2 — Remappable peripheral I/O, PMP write strobe |
| پن 15 | RP1/PMCS1/RB1 — Remappable peripheral I/O, PMP chip select 1 |
| پن 16 | RP0/PMCS0/RB0 — Remappable peripheral I/O, PMP chip select 0 |
| پن 17 | AVDD — Analog supply voltage |
| پن 18 | AVSS — Analog ground |
| پن 19 | AN0/VREF+/CVREF+/PMA6/RA0 — Analog input 0, positive voltage reference, PMP address |
| پن 20 | AN1/VREF-/CVREF-/PMA7/RA1 — Analog input 1, negative voltage reference, PMP address |
| پن 21 | AN2/PMA5/RA2 — Analog input 2, PMP address |
| پن 22 | AN3/PMA4/RA3 — Analog input 3, PMP address |
| پن 23 | AN4/PMA3/RA4 — Analog input 4, PMP address |
| پن 24 | AN5/PMA2/RA5 — Analog input 5, PMP address |
| پن 25 | AN6/PMA1/RA6 — Analog input 6, PMP address |
| پن 26 | AN7/PMA0/RA7 — Analog input 7, PMP address |
| پن 27 | AN8/RP20/RB0 — Analog input 8, remappable peripheral I/O |
| پن 28 | AN9/RP21/RB1 — Analog input 9, remappable peripheral I/O |
| پن 29 | AN10/CVREF/RP22/RB2 — Analog input 10, comparator reference, remappable peripheral I/O |
| پن 30 | AN11/RP23/RB3 — Analog input 11, remappable peripheral I/O |
| پن 31 | AN12/RP24/RB4 — Analog input 12, remappable peripheral I/O |
| پن 32 | AN13/RP25/RB5 — Analog input 13, remappable peripheral I/O |
| پن 33 | AN14/RP26/RB6 — Analog input 14, remappable peripheral I/O |
| پن 34 | AN15/RP27/RB7 — Analog input 15, remappable peripheral I/O |
| پن 35 | VREF+/CVREF+/PMA6/RA0 — Positive voltage reference, comparator ref, PMP address |
| پن 36 | VREF-/CVREF-/PMA7/RA1 — Negative voltage reference, comparator ref, PMP address |
| پن 37 | VDD — Positive supply voltage |
| پن 38 | VSS — Ground reference |
| پن 39 | OSC1/RA15 — Oscillator input / general I/O |
| پن 40 | OSC2/RA14 — Oscillator output / general I/O |
| پن 41 | SOSCI/RP29/RC0 — Secondary oscillator input, remappable I/O |
| پن 42 | SOSCO/RP30/RC1 — Secondary oscillator output, remappable I/O |
| پن 43 | RP17/PMBE0/RF0 — Remappable peripheral I/O, PMP byte enable |
| پن 44 | RP18/PMBE1/RF1 — Remappable peripheral I/O, PMP byte enable |
| پن 45 | RP19/PMD0/RF2 — Remappable peripheral I/O, PMP data |
| پن 46 | RP28/PMD1/RF3 — Remappable peripheral I/O, PMP data |
| پن 47 | RP8/PMD2/RF4 — Remappable peripheral I/O, PMP data |
| پن 48 | RP9/PMD3/RF5 — Remappable peripheral I/O, PMP data |
| پن 49 | RP4/PMD4/RF6 — Remappable peripheral I/O, PMP data |
| پن 50 | RP5/PMD5/RF7 — Remappable peripheral I/O, PMP data |
| پن 51 | RP6/PMD6/RF8 — Remappable peripheral I/O, PMP data |
| پن 52 | RP7/PMD7/RF9 — Remappable peripheral I/O, PMP data |
| پن 53 | RP10/PMD8/RF10 — Remappable peripheral I/O, PMP data |
| پن 54 | RP11/PMD9/RF11 — Remappable peripheral I/O, PMP data |
| پن 55 | RP12/PMD10/RF12 — Remappable peripheral I/O, PMP data |
| پن 56 | RP13/PMD11/RF13 — Remappable peripheral I/O, PMP data |
| پن 57 | RP14/PMD12/RF14 — Remappable peripheral I/O, PMP data |
| پن 58 | RP15/PMD13/RF15 — Remappable peripheral I/O, PMP data |
| پن 59 | RP16/PMA0/RG0 — Remappable peripheral I/O, PMP address |
| پن 60 | RP17/PMA1/RG1 — Remappable peripheral I/O, PMP address |
| پن 61 | RP18/PMA2/RG2 — Remappable peripheral I/O, PMP address |
| پن 62 | RP19/PMA3/RG3 — Remappable peripheral I/O, PMP address |
| پن 63 | MCLR — Master clear reset input (active low) |
| پن 64 | VDD — Positive supply voltage |
عام استعمالات
PIC24FJ64GA106-E/PT کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Sensor Hub, Portable Medical Monitoring Devices, USB Human Interface Devices, Home Automation Edge Controllers, Automotive Body Electronics, Secure Access Control Panels.
Industrial Sensor Hub
The PIC24FJ64GA106-E/PT fits industrial sensor hubs because it combines 53 I/O pins for multi-channel ADC scanning, three SPI buses to drive digital accelerometers and pressure sensors, and a 32 MHz core to filter noise in real time. Its 64 KB Flash holds Modbus RTU or IO-Link stack libraries plus custom sensor fusion code, while 8 KB RAM buffers raw ADC samples before averaging. The device's nanoWatt Technology with sub-100 nA RTCC standby enables 4-20 mA loop-powered and battery-backed designs where the MCU wakes only on sensor interrupts. PPS remapping simplifies PCB layout when routing multiple SPI slaves across a compact backplane.
تجویز کردہ
Portable Medical Monitoring Devices
The PIC24FJ64GA106-E/PT suits portable medical monitors because its 32 MHz 16-bit core delivers deterministic interrupt handling required for accurate pulse-oximetry, ECG sampling, and temperature trending. With 8 KB RAM, the MCU buffers multiple physiological waveforms before Bluetooth or USB transmission, and the 10-bit ADC with 16 channels captures sensor inputs directly. The 2.0-3.6 V supply window supports two-AA cells, while deep Sleep modes with sub-100 nA current extend battery life in patient-worn patches. The wide -40 C to +125 C extended operating range also enables disinfection workflows in clinical environments.
تجویز کردہ
USB Human Interface Devices
The PIC24FJ64GA106-E/PT is a strong fit for USB HID peripherals such as keyboards, mice, and custom input devices because it provides four UARTs, three SPI, and three I2C ports for multi-sensor input, while its PMP can interface to small TFT displays or character LCDs. The 32 MHz MIPS throughput handles USB polling, debouncing, and on-board LED animation concurrently, and 8 KB RAM supports USB descriptors plus HID report buffers. The 64 KB Flash holds composite USB stacks including CDC, HID, and vendor classes. The 64-TQFP footprint is comfortable for through-hole-friendly TQFP PCB layouts used by gaming peripherals.
تجویز کردہ
Home Automation Edge Controllers
For home automation edge controllers, the PIC24FJ64GA106-E/PT combines sufficient Flash for Zigbee or sub-GHz wireless stacks with multiple serial ports to bridge sensors and actuators. Its 23 independent timers cover PWM dimming channels for smart lighting, real-time scheduling for HVAC control, and watchdog supervision for fail-safe operation. The 16-bit PMP can drive character LCDs for user feedback, while PPS remapping allows flexible PCB routing of multi-protocol daughter cards. Sub-100 nA standby current means battery-backed wireless sensors can operate for years on a single coin cell.
تجویز کردہ
Automotive Body Electronics
The PIC24FJ64GA106-E/PT is suitable for automotive body modules such as HVAC control, mirror adjustment, and lighting drivers because its extended -40 C to +125 C temperature grade survives under-dash thermal stress. The 53 I/O pins drive multiple relays and PWM channels for motor speed control, while the 32 MHz core executes CAN-style message handling and debouncing in real time. Four UARTs connect to remote LIN sub-modules, and the 16-bit PMP interfaces to dot-matrix display panels. For AEC-Q100 qualified applications, Microchip offers the PIC24FJ family variants designated with -Q grades for automotive qualification.
تجویز کردہ
Secure Access Control Panels
Secure access panels use the PIC24FJ64GA106-E/PT to combine keypad scanning, RFID reader interfaces, and encrypted credential storage in one MCU. With 64 KB Flash for AES or SHA crypto libraries and 8 KB RAM for transaction buffers, the device handles multi-factor authentication flows without external crypto accelerators. Its 32 MHz throughput executes challenge-response protocols in milliseconds, and four UARTs bridge RFID, BLE modules, and lock actuators simultaneously. PPS remapping enables routing peripheral pins around security-critical traces for tamper resistance, while sub-100 nA standby preserves battery during power-loss events.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC24FJ64GA106-E/PT — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC24FJ64GA106-I/PT | PIC24FJ128GA106-I/PT | PIC24FJ128GB106-I/PT |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-TQFP (PT) 10x10 mm | 64-TQFP (PT) 10x10 mm - same | 64-TQFP (PT) 10x10 mm - same | 64-TQFP (PT) 10x10 mm - same |
| Flash Memory | 64 KB | 64 KB (same) | 128 KB (+100%) | 128 KB (+100%) |
| RAM | 8 KB | 8 KB (same) | 8 KB (same) | 8 KB (same) |
| CPU Speed | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS (same) | 32 MHz / 16 MIPS (same) | 32 MHz / 16 MIPS (same) |
| Operating Temperature | -40 C to +125 C (Extended) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) |
| USB OTG | No | No | No | Yes (Full-Speed USB OTG) |
| Price @ 100 pcs (USD) | 3.74 | 3.65 (similar) | 4.25 (higher) | 5.10 (higher) |
اہم امتیازی خصوصیات
- Extended temperature grade -40 C to +125 C in a 64-TQFP family part (بمقابلہPIC24FJ64GA106-I/PT)
- Same-footprint Flash upgrade path to PIC24FJ128GA106-I/PT (بمقابلہPIC24FJ128GA106-I/PT)
- PMP peripheral included on the GA106 family (بمقابلہPIC24FJ64GA104T-I/ML)
ڈیزائن نوٹس
Decouple VDD with a 100 nF ceramic capacitor placed within 5 mm of each VDD/VSS pin pair, plus a single 10 uF bulk tantalum or ceramic near the MCU. For battery-powered designs, add a 100 kohm external pull-up on MCLR so the internal pull-up does not source current during Sleep. The nanoWatt Technology Sleep mode achieves sub-100 nA when peripherals are properly disabled via PMD registers; leaving unused peripherals active can add several microamps. Estimated: a design using 100 nF + 10 uF decoupling and disabled PMD typically draws 5-8 mA active and <100 nA standby.
Route crystal traces (OSC1/OSC2 or SOSCI/SOSCO) symmetrically with short traces guarded by a ground ring, and place load capacitors within 3 mm of the oscillator pins. Avoid running PWM or analog traces adjacent to the secondary oscillator to prevent frequency jitter. The 64-TQFP exposed pad is optional for thermal relief but should be soldered to a copper pour to improve heat spreading when the MCU runs sustained MIPS loads.
Do not assume the analog and digital VDD pins are isolated; tie AVSS to VSS with a single connection and add a small ferrite bead between AVDD and VDD if analogue noise is observed. The PMP pins only function correctly when the PMPEN bit is set in the PMCON register; leaving them as GPIO silently wastes pin resources. Programming voltage in low-voltage ICSP modes requires the PGMxCVR pins to follow Microchip's programming spec exactly, otherwise blank parts can result.
تعمیل کی معلومات
RoHS/REACH compliant per Microchip product page; AEC-Q100 qualification requires PIC24FJ -Q part numbering for automotive designs. Halogen-free status not confirmed in provided data.
