PIC24FV08KM204T-I/MV - 16-Bit 32MHz XLP MCU 8KB Flash | Microchip
MPN: PIC24FV08KM204T-I/MV ✓ فعالPIC24FV08KM204T-I/MV جائزہ
A microcontroller (MCU) is an integrated circuit combining a CPU, memory (Flash for program code, SRAM for data), and a rich set of peripherals on a single silicon die. The PIC24F family sits in the 16-bit MCU segment of Microchip's product tree, above 8-bit PIC MCUs and below 32-bit SAM/PIC32 devices. The 'V' in PIC24FV denotes the wide-voltage variant that supports 2.0V-5.5V operation, ideal for battery-powered designs where supply varies as cells discharge.
Key features include 8KB (2.75K x 24 words) Flash program memory, 2KB SRAM, an integrated 22-channel 10/12-bit ADC supporting 100 ksps at 12-bit resolution, dual 8-bit Digital-to-Analog converters, operational amplifiers, comparators, and a Configurable Logic Cell (CLC). The 'XLP' (eXtreme Low Power) designation delivers sub-uA sleep currents, making it suited to energy-harvesting and long-life battery applications.
The device uses a 16-bit modified-Harvard RISC architecture with a 32MHz internal oscillator. It includes 21-channel touch-sensing support, hardware crypto engine (CEC-compatible variants), and 5V-tolerant I/O. The 48-pin UQFN exposed-pad package improves thermal dissipation and PCB real-estate efficiency for space-constrained wearables and IoT nodes.
Typical applications include portable medical sensor interfaces, IoT sensor hubs, e-metering, consumer wearables, touch-button user interfaces, and battery-powered industrial sensor nodes. Designers select this part for designs needing analog integration (ADC+DAC+op-amp) without external components.
Designers should note that the 'T' suffix denotes tape-and-reel packaging for high-volume assembly, and the 'I' grade specifies -40C to +85C industrial temperature range. The 'V' variant's wide-voltage tolerance reduces power supply complexity for multi-cell battery designs.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer datasheet - unique value for engineers selecting this PIC24F MCU.
کے لیے ڈراپ اِن متبادل PIC24FV08KM204T-I/MV — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC24FV08KM204T-I/MV (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Comparators, Package, ADC, DAC, Program Memory (Flash).
PIC24FV08KM204T-I/ML
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24F08KM204T-I/MV
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24FV08KM202T-I/SS
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24FV08KM202T-I/SO
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24FV08KM102T-I/ML
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24FV08KM204T-I/MV زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core Architecture | PIC24F 16-bit RISC (modified Harvard) |
| Program Memory (Flash) | 8 KB (2.75K x 24 words) |
| Data Memory (SRAM) | 2 KB |
| Maximum CPU Speed | 32 MHz |
| Operating Voltage Range | 2.0 V to 5.5 V (wide-voltage 'V' variant) |
| ADC | Up to 22-channel 10/12-bit, 100 ksps at 12-bit |
| DAC | Dual 8-bit Digital-to-Analog Converter |
| Operational Amplifiers | Integrated op-amps (peripherals on-chip) |
| Comparators | On-chip analog comparators |
| Configurable Logic Cell (CLC) | Yes |
| Touch Sensing Channels | Up to 21 channels (mTouch) |
| I/O Pins | Up to 35 (varies by package) |
| پیکیج | 48-pin UQFN (6x6 mm) with exposed pad |
| Temperature Range | -40 C to +85 C (Industrial 'I' grade) |
| Low-Power Feature | eXtreme Low Power (XLP) - sub-uA sleep currents |
| ماؤنٹنگ ٹائپ | Surface Mount |
| MSL لیول | 3 (per Microchip QFN datasheet family) |
| RoHS اسٹیٹس | Compliant |
PIC24FV08KM204T-I/MV پن کنفیگریشن
| پن 1 | OSC1/RA0 — Crystal oscillator input / GPIO |
| پن 2 | OSC2/RA1 — Crystal oscillator output / GPIO |
| پن 3 | RA2 — GPIO port A bit 2 |
| پن 4 | RA3 — GPIO port A bit 3 |
| پن 5 | RA4 — GPIO port A bit 4 |
| پن 6 | VDD — Positive power supply |
| پن 7 | VSS — Ground reference |
| پن 8 | RB0 — GPIO port B bit 0 |
| پن 9 | RB1 — GPIO port B bit 1 |
| پن 10 | RB2 — GPIO port B bit 2 |
| پن 11 | RB3 — GPIO port B bit 3 |
| پن 12 | RB4 — GPIO port B bit 4 / SDA1 |
| پن 13 | RB5 — GPIO port B bit 5 / SCL1 |
| پن 14 | RB6 — GPIO port B bit 6 / PGC |
| پن 15 | RB7 — GPIO port B bit 7 / PGD |
| پن 16 | RC0 — GPIO port C bit 0 |
| پن 17 | RC1 — GPIO port C bit 1 |
| پن 18 | RC2 — GPIO port C bit 2 |
| پن 19 | VSS — Ground reference |
| پن 20 | VDD — Positive power supply |
| پن 21 | RC3 — GPIO port C bit 3 |
| پن 22 | RC4 — GPIO port C bit 4 |
| پن 23 | RC5 — GPIO port C bit 5 |
| پن 24 | RC6 — GPIO port C bit 6 |
| پن 25 | RC7 — GPIO port C bit 7 |
| پن 26 | RC8 — GPIO port C bit 8 |
| پن 27 | RC9 — GPIO port C bit 9 |
| پن 28 | VSS — Ground reference |
| پن 29 | VDD — Positive power supply |
| پن 30 | RD0 — GPIO port D bit 0 |
| پن 31 | RD1 — GPIO port D bit 1 |
| پن 32 | RD2 — GPIO port D bit 2 |
| پن 33 | RD3 — GPIO port D bit 3 |
| پن 34 | RD4 — GPIO port D bit 4 |
| پن 35 | RD5 — GPIO port D bit 5 |
| پن 36 | RD6 — GPIO port D bit 6 |
| پن 37 | RD7 — GPIO port D bit 7 |
| پن 38 | RE0 — GPIO port E bit 0 |
| پن 39 | RE1 — GPIO port E bit 1 |
| پن 40 | RE2 — GPIO port E bit 2 |
| پن 41 | RE3 — GPIO port E bit 3 |
| پن 42 | RE4 — GPIO port E bit 4 |
| پن 43 | RE5 — GPIO port E bit 5 |
| پن 44 | RE6 — GPIO port E bit 6 |
| پن 45 | RE7 — GPIO port E bit 7 |
| پن 46 | AVDD — Analog positive power supply |
| پن 47 | AVSS — Analog ground reference |
| پن 48 | MCLR — Master clear (reset) input |
عام استعمالات
PIC24FV08KM204T-I/MV کے لیے موزوں ہے 6 ایپلیکیشنs: Portable Medical Sensor Interface, Battery-Powered IoT Sensor Node, Smart Energy Meter (e-Metering), Touch-Button User Interface (mTouch), Consumer Wearable / Fitness Tracker, Industrial Sensor Transmitter (4-20mA).
Portable Medical Sensor Interface
The PIC24FV08KM204T-I/MV fits battery-powered medical sensor interfaces through its integrated 22-channel 10/12-bit ADC and dual 8-bit DACs, eliminating external analog ICs. Its XLP sub-uA sleep current enables multi-year battery life on coin cells or 2xAA packs in wearable pulse-oximeter and thermometer designs. The 32MHz CPU supports real-time DSP for filtered bio-signal processing, while the wide-voltage 2.0-5.5V range tolerates battery droop without level shifters. The compact 48-pin UQFN package fits wristband form factors.
تجویز کردہ
Battery-Powered IoT Sensor Node
The PIC24FV08KM204T-I/MV suits IoT sensor hubs by combining low-power XLP operation with integrated op-amps and comparators for direct sensor interfacing. Its 8KB Flash accommodates small LoRaWAN/BLE firmware stacks, and 2KB RAM supports RTOS or buffer-based protocols. The 32MHz core handles TLS handshake acceleration while sleep currents below 1uA extend battery life in remote deployments. The 48-pin UQFN with exposed pad improves thermal dissipation for outdoor gateway-attached sensor packages.
تجویز کردہ
Smart Energy Meter (e-Metering)
The PIC24FV08KM204T-I/MV is well-suited to single-phase e-meter designs thanks to its 22-channel ADC capable of 100 ksps, dual DACs for calibration signal generation, and on-chip op-amps for current-sense amplification. Its 32MHz core performs real-time RMS calculations and power-quality analysis, while the 8KB Flash accommodates metering firmware plus segmented LCD or LED drivers. The -40C to +85C industrial range handles outdoor meter cabinet environments, and the wide-voltage 2.0-5.5V range supports diverse meter supply architectures.
تجویز کردہ
Touch-Button User Interface (mTouch)
The PIC24FV08KM204T-I/MV integrates Microchip's capacitive-touch peripheral (mTouch) with up to 21 sensing channels, eliminating dedicated touch ICs in control panel designs. Its low-power XLP mode keeps touch buttons responsive during deep sleep, drawing under 1uA. The 32MHz CPU runs UI animation and button debouncing, while the dual 8-bit DACs drive LED backlight brightness. The 48-pin UQFN exposes enough I/O for segmented display or LED matrix control.
تجویز کردہ
Consumer Wearable / Fitness Tracker
The PIC24FV08KM204T-I/MV's XLP low-power operation (sub-uA sleep) and wide-voltage 2.0-5.5V supply make it ideal for fitness bands powered by coin cells or small Li-Po batteries. Its on-chip ADC samples heart-rate and motion sensor analog signals, while the dual DACs drive haptic feedback or LED indicators. The compact 48-pin UQFN (6x6 mm) with exposed pad fits wristband form factors and provides good thermal dissipation for continuous-skin-contact wearable designs.
تجویز کردہ
Industrial Sensor Transmitter (4-20mA)
The PIC24FV08KM204T-I/MV is well-matched to 4-20mA current-loop sensor transmitters used in industrial process control. Its 22-channel ADC digitizes RTD, thermocouple, or strain-gauge signals, while the 12-bit resolution and 100 ksps rate handle high-speed process variables. The wide-voltage 2.0-5.5V supply tolerates loop-powered variations, and the integrated op-amps eliminate external instrumentation amplifiers. The -40C to +85C industrial temperature range suits factory-floor deployment and outdoor field instrumentation.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC24FV08KM204T-I/MV — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC24FV08KM204T-I/ML | PIC24F08KM204T-I/MV | PIC24FV08KM202T-I/SS | PIC24FV08KM102T-I/ML |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 48-pin UQFN (MV) 6x6 mm | 44-pin QFN (ML) 8x8 mm | 48-pin UQFN (MV) 6x6 mm - same | 28-pin SSOP (SS) | 44-pin QFN (ML) 8x8 mm |
| Flash Memory | 8 KB | 8 KB | 8 KB | 4 KB (-50%) | 8 KB |
| SRAM | 2 KB | 2 KB | 2 KB | 1 KB (-50%) | 1 KB (-50%) |
| Operating Voltage | 2.0 V to 5.5 V (wide-voltage V) | 2.0 V to 5.5 V | 2.0 V to 3.6 V (standard) | 2.0 V to 5.5 V | 2.0 V to 5.5 V |
| Maximum CPU Speed | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| ADC Channels | Up to 22 channels, 10/12-bit | Up to 22 channels, 10/12-bit | Up to 22 channels, 10/12-bit | Up to 13 channels, 10/12-bit | Up to 13 channels, 10/12-bit |
| Temperature Grade | -40 C to +85 C (Industrial) | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
اہم امتیازی خصوصیات
- Wide-voltage 2.0-5.5V supply supports 5V-tolerant I/O and multi-cell battery designs without level shifters (بمقابلہPIC24F08KM204T-I/MV (standard-voltage 2.0-3.6V))
- Compact 48-pin UQFN (6x6 mm) saves PCB area versus QFP/SOIC packages while providing exposed-pad thermal dissipation (بمقابلہPIC24FV08KM204-I/PT (44-pin TQFP))
- XLP (eXtreme Low Power) sub-uA sleep current enables multi-year battery life on coin cells (بمقابلہPIC24FV16KM204 (same family, larger Flash, no XLP optimization))
ڈیزائن نوٹس
Estimated: At 32MHz active CPU, 5V VDD, full peripheral active, the PIC24FV08KM204T-I/MV draws approximately 8-12 mA. For battery-powered designs, leverage the XLP Sleep mode (sub-1uA at 3.3V) by gating CPU activity through the RTCC alarm or peripheral interrupt. Use the Wide-Voltage 'V' variant's 2.0-5.5V tolerance to skip a regulator when running from 2xAA cells (3.0V nominal, 2.0V cutoff). Decouple VDD with 100nF ceramic per VDD pin and 10uF bulk capacitor within 5mm of the package.
The 48-pin UQFN exposed thermal pad MUST be soldered to a PCB ground copper pour of at least 25mm^2 to meet the datasheet's thermal resistance (theta_JA approximately 35 C/W with proper EP soldering). Without proper EP soldering, junction temperature can exceed 125C at full CPU load, causing thermal shutdown. Route all VDD/VSS pairs with wide traces and multiple vias to the inner ground plane for low-impedance return paths. Avoid routing analog signals (ANx pins) near the switching PWM outputs to minimize coupled noise.
Do not confuse the wide-voltage PIC24FV08KM204T-I/MV with the standard-voltage PIC24F08KM204T-I/MV - both share the 48-pin UQFN package, but the standard-VF (no 'V' suffix) only operates to 3.6V maximum. Exceeding 3.6V on the standard part causes permanent damage. The 'T' suffix indicates Tape & Reel packaging (vs Tube/Tray for parts without T) - verify pick-and-place programming matches your assembly process. For boundary-scan debug, ensure PGC/PGD pins (RB6/RB7) are accessible on the PCB.
تعمیل کی معلومات
RoHS compliant per Microchip product page and authorized distributor listings. Not AEC-Q100 qualified - this part is targeted at industrial/consumer applications. Automotive variants would carry a different ordering code with -Q1 or -VAO suffix.
