PIC24FV16KM204-I/ML - 16-Bit XLP MCU, 16KB Flash, 44-QFN | Microchip
MPN: PIC24FV16KM204-I/ML ✓ فعالPIC24FV16KM204-I/ML جائزہ
A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), working memory (RAM), data EEPROM and a rich peripheral set. The PIC24F belongs to the 16-bit PIC family, which sits hierarchically between the 8-bit PIC16/PIC18 families and the 16-bit dsPIC33 DSP-capable family. XLP technology is Microchip's brand for nanoWatt-class sleep currents targeting battery applications. The 'V' prefix in PIC24FV denotes wide operating voltage (1.8 V to 5.5 V), making the part suitable for both 3.3 V and 5 V rails.
Key features include 16 KB Flash, 2 KB SRAM, three 16-bit timers, multiple UART/SPI/I2C interfaces, 12-bit ADC up to 500 ksps, dual rail-to-rail op amps, an 8-bit DAC, three analog comparators, configurable logic cells (CLC), and a peripheral pin select (PPS) subsystem. The device supports up to 32 MIPS performance at 32 MHz and includes a real-time clock calendar (RTCC) with calendar mode.
Architecturally, the PIC24FV16KM204 uses a modified Harvard 16-bit RISC core with single-cycle bit operations and hardware multiply, allowing deterministic interrupt response in C-language designs. The on-chip op amps and DAC enable closed-loop analog signal conditioning without external components, while the CLC peripheral implements glue-logic functions in hardware.
Typical applications include low-power IoT sensor nodes, battery-powered instrumentation, portable medical monitors, smart energy metering and consumer HMI with touch sensing. The wide-voltage range suits 2xAA battery packs and 5 V industrial sensors.
A key design consideration is selecting the right low-power mode. Sleep current at 1.8 V can drop below 20 nA with RTCC and external interrupts active, but enabling ADC or op amps raises consumption - profile each mode against your duty-cycled workload.
This page synthesizes current distributor inventory, parameter-level alternatives in the same 44-QFN footprint, and field-ready design notes that complement the official Microchip datasheet.
کے لیے ڈراپ اِن متبادل PIC24FV16KM204-I/ML — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC24FV16KM204-I/ML (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Program Memory (Flash), ADC, Maximum CPU Speed, Operating Temperature.
PIC24FV32KM204-I/ML
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC24FV16KM202-I/ML
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24F16KM204-I/ML
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24FV16KM104-I/ML
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
DSPIC33FJ16GP304-I/ML
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24FJ64GA004-I/ML
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24FV16KM204-I/ML زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core Architecture | PIC24F 16-bit modified Harvard RISC |
| Maximum CPU Speed | 32 MHz (32 MIPS) |
| Program Memory (Flash) | 16 KB (5.5K x 24 instructions) |
| Data SRAM | 2 KB |
| Data EEPROM | 512 B |
| Operating Voltage Range | 1.8 V to 5.5 V (wide Vdd) |
| ADC | 12-bit, up to 500 ksps, multiple channels |
| DAC | 8-bit |
| On-chip Op Amps | Yes (rail-to-rail I/O, dual) |
| Comparators | 3 (with selectable reference) |
| Configurable Logic Cell (CLC) | Yes |
| Peripheral Pin Select (PPS) | Yes |
| Communication Interfaces | UART, SPI, I2C (multiple instances) |
| Timers | Three 16-bit timers |
| RTCC | Real-Time Clock Calendar with alarm |
| پیکیج | 44-pin QFN (8x8 mm) with EP |
| ماؤنٹنگ ٹائپ | Surface Mount |
| آپریٹنگ درجہ حرارت | -40 C to +85 C (industrial) |
| MSL لیول | 3 |
| RoHS اسٹیٹس | Compliant |
PIC24FV16KM204-I/ML پن کنفیگریشن
| پن 1 | RA0 — Digital I/O / analog input |
| پن 2 | RA1 — Digital I/O / analog input |
| پن 3 | RA2 — Digital I/O / analog input |
| پن 4 | RA3 — Digital I/O / analog input / op amp output |
| پن 5 | RA4 — Digital I/O / analog input |
| پن 6 | RA5 — Digital I/O / analog input |
| پن 7 | RA6 — Digital I/O / analog input |
| پن 8 | RA7 — Digital I/O / analog input |
| پن 9 | RB0 — Digital I/O / analog input / PGM |
| پن 10 | RB1 — Digital I/O / analog input |
| پن 11 | RB2 — Digital I/O / analog input |
| پن 12 | RB3 — Digital I/O / analog input |
| پن 13 | RB4 — Digital I/O / analog input |
| پن 14 | RB5 — Digital I/O / analog input |
| پن 15 | RB6 — Digital I/O / analog input |
| پن 16 | RB7 — Digital I/O / analog input |
| پن 17 | RC0 — Digital I/O / analog input |
| پن 18 | RC1 — Digital I/O / analog input |
| پن 19 | RC2 — Digital I/O / analog input |
| پن 20 | RC3 — Digital I/O / analog input |
| پن 21 | RC4 — Digital I/O / analog input |
| پن 22 | RC5 — Digital I/O / analog input |
| پن 23 | RC6 — Digital I/O / analog input |
| پن 24 | RC7 — Digital I/O / analog input |
| پن 25 | RD0 — Digital I/O / analog input |
| پن 26 | RD1 — Digital I/O / analog input |
| پن 27 | RD2 — Digital I/O / analog input |
| پن 28 | RD3 — Digital I/O / analog input |
| پن 29 | RD4 — Digital I/O / analog input |
| پن 30 | RD5 — Digital I/O / analog input |
| پن 31 | RD6 — Digital I/O / analog input |
| پن 32 | RD7 — Digital I/O / analog input |
| پن 33 | RE0 — Digital I/O / analog input |
| پن 34 | RE1 — Digital I/O / analog input |
| پن 35 | RE2 — Digital I/O / analog input |
| پن 36 | RE3 — Digital I/O / analog input |
| پن 37 | RE4 — Digital I/O / analog input |
| پن 38 | RE5 — Digital I/O / analog input |
| پن 39 | RE6 — Digital I/O / analog input |
| پن 40 | RE7 — Digital I/O / analog input |
| پن 41 | OSC1 — Crystal oscillator input |
| پن 42 | OSC2 — Crystal oscillator output |
| پن 43 | MCLR — Master clear / reset input |
| پن 44 | VDD — Positive supply |
عام استعمالات
PIC24FV16KM204-I/ML کے لیے موزوں ہے 7 ایپلیکیشنs: Battery-Powered IoT Sensor Node, Portable Medical Monitoring Device, Industrial Sensor Conditioning and 4-20 mA Loop, Smart Energy Meter and Submeter, Consumer HMI with Capacitive Touch, Automotive Body and Sensor Modules, Portable Test and Measurement Instrumentation.
Battery-Powered IoT Sensor Node
The PIC24FV16KM204-I/ML's XLP deep-sleep current under 20 nA at 1.8 V, integrated 12-bit ADC and on-chip dual op amps make it ideal for battery-powered IoT sensor nodes. In a typical design, a single 2xAA battery pack or CR2032 coin cell powers the MCU directly across the full 1.8 V to 5.5 V wide Vdd range, with the op amp conditioning a sensor bridge before the ADC samples at 500 ksps. The CLC peripheral can wake the MCU on threshold crossings, minimizing active time. Average current below 1 uA is achievable with duty-cycled measurements, delivering multi-year battery life on a 2400 mAh cell.
تجویز کردہ
Portable Medical Monitoring Device
The 1.8 V to 5.5 V wide Vdd and on-chip op amps suit portable medical monitors such as pulse oximeters, glucose meters and blood-pressure cuffs. The PIC24FV16KM204-I/ML samples photodiode or bridge signals through its dual rail-to-rail op amps, digitizes via the 12-bit ADC, and stores calibration in the 512-byte EEPROM. The DAC drives a precision bias or audio cue. XLP technology keeps quiescent current low, extending battery life on AAA cells. The integrated op amps eliminate the need for separate analog-front-end ICs, reducing BOM cost and PCB area in FDA-cleared home-health products.
تجویز کردہ
Industrial Sensor Conditioning and 4-20 mA Loop
Industrial sensors benefit from the PIC24FV16KM204-I/ML's wide 1.8 V to 5.5 V supply range, -40 C to +85 C industrial temperature grade, and integrated op amps for bridge and 0-10 V signal conditioning. A RTD or strain-gauge bridge is amplified by an on-chip op amp, the 12-bit ADC digitizes, and the MCU outputs a 4-20 mA loop signal via PWM plus a discrete DAC. The CLC provides fault detection combining comparator outputs. PPS lets engineers remap UART, SPI and I2C to any digital pin, simplifying mixed-signal industrial PCB layout and minimizing noise coupling into the analog section.
تجویز کردہ
Smart Energy Meter and Submeter
The PIC24FV16KM204-I/ML is well suited to single-phase smart submeter designs with on-chip op amps handling current-sense and voltage-divider signals while the 12-bit ADC samples at 500 ksps. Real-time clock calendar with calendar mode timestamps consumption, and 2 KB SRAM buffers measurements between low-energy UART transmissions. 16 KB Flash holds the metrology code, display driver, and calibration data; 512-byte EEPROM holds tamper flags and lifetime counters. Wide Vdd tolerates rectified mains without level shifters, reducing BOM cost in metrology-grade consumer submeters.
تجویز کردہ
Consumer HMI with Capacitive Touch
For low-cost consumer interfaces with capacitive touch buttons and an OLED or character LCD, the PIC24FV16KM204-I/ML integrates the op amps, comparators and PPS required to scan CTMU-based touch sensors while driving the display via SPI. The CLC peripheral combines comparator and timer signals to wake the MCU on touch events, then the SPI bus updates a small OLED graphic. Sleep current below 20 nA extends battery life in handheld remote controls, e-readers and IoT user interfaces that sit dormant between user interactions.
تجویز کردہ
Automotive Body and Sensor Modules
Automotive body controllers and sensor modules leverage the PIC24FV16KM204 family for LIN-bus communication, sensor conditioning and actuator driving. The wide 5.5 V Vdd rail tolerates automotive load-dump and cranking transients when paired with proper TVS protection. On-chip op amps handle temperature, position and pressure sensor signals while the CLC generates timing debouncing of switch signals. EEPROM stores node configuration. For AEC-Q100 qualified variants in safety-relevant automotive designs, designers typically move up to the dsPIC33EP or PIC24HJ automotive families; the KM family serves non-safety body ECUs.
تجویز کردہ
Portable Test and Measurement Instrumentation
Handheld multimeters, signal sources and cable testers benefit from the PIC24FV16KM204-I/ML's integrated op amps for input signal conditioning, dual 12-bit ADC channels for differential measurement, and PPS for flexible LCD and button scanning. The DAC drives a programmable reference voltage, while the UART outputs RS-232 / RS-485 via external transceivers. Wide Vdd supports 9 V battery through switching regulator rails, and XLP technology extends operating time in field-instrumentation use. Industrial -40 C to +85 C temperature grade supports outdoor deployment.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC24FV16KM204-I/ML — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC24FV32KM204-I/ML | PIC24FV16KM202-I/ML | PIC24F16KM204-I/ML | PIC24FV16KM104-I/ML | dsPIC33FJ16GP304-I/ML | PIC24FJ64GA004-I/ML |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-QFN (8x8 mm) | 44-QFN (8x8 mm) - same | 44-QFN (8x8 mm) - same | 44-QFN (8x8 mm) - same | 44-QFN (8x8 mm) - same | 44-QFN (8x8 mm) - same | 44-QFN (8x8 mm) - same |
| Program Memory (Flash) | 16 KB | 32 KB | 8 KB | 16 KB | 16 KB | 16 KB | 64 KB |
| Data SRAM | 2 KB | 2 KB | 1 KB | 2 KB | 2 KB | 2 KB | 8 KB |
| Operating Voltage | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 3.6 V | 1.8 V to 5.5 V | 3.0 V to 3.6 V | 2.0 V to 3.6 V |
| CPU Speed | 32 MHz (32 MIPS) | 32 MHz (32 MIPS) | 32 MHz (32 MIPS) | 32 MHz (32 MIPS) | 32 MHz (32 MIPS) | 40 MHz (40 MIPS) | 32 MHz (32 MIPS) |
| ADC | 12-bit, 500 ksps | 12-bit, 500 ksps | 12-bit, 500 ksps | 12-bit, 500 ksps | 12-bit, 500 ksps | 12-bit ADC, 200 ksps | 10-bit, 500 ksps |
| On-chip Op Amps | Yes (dual) | Yes (dual) | Yes (dual) | Yes (dual) | Yes (dual) | No | No |
| Integrated LCD | No | No | No | No | No | No | Yes |
اہم امتیازی خصوصیات
- Wide 1.8 V to 5.5 V Vdd range with 5 V tolerance on digital I/O (بمقابلہPIC24F16KM204-I/ML)
- Integrated on-chip dual op amps and 8-bit DAC for analog conditioning (بمقابلہdsPIC33FJ16GP304-I/ML)
- Configurable Logic Cell (CLC) peripheral for hardware glue logic (بمقابلہPIC24FJ64GA004-I/ML)
- eXtreme Low Power (XLP) with sub-20 nA deep-sleep current (بمقابلہPIC24FV32KM204-I/ML)
ڈیزائن نوٹس
Use deep-sleep mode with RTCC active and external interrupts enabled to reach under 20 nA quiescent current on battery-powered IoT nodes. Wake only on a periodic RTCC alarm (typically every 1 to 60 s) or a sensor-triggered external interrupt, perform the ADC sample, then return to sleep. Decoupling: place a 0.1 uF ceramic + 1 uF tantalum within 5 mm of each VDD/VSS pair on the 44-QFN, and 10 uF bulk at board entry. Wide Vdd 1.8 V to 5.5 V tolerates a 2xAA alkaline pack across discharge profile without a switching regulator.
On the 44-QFN (8x8 mm) exposed-pad package, the central thermal pad must be soldered to the ground plane with a 5x5 grid of thermal vias (12 mil diameter, 8 mil plated) for heat dissipation and ground reference. Keep analog traces (sensor inputs, op amp I/O) at least 5 mm away from switching converter traces and oscillator traces to minimize capacitive coupling. Use a 4-layer PCB with a continuous ground plane under the analog section, and route op amp output traces directly to the dedicated ADC channel pins to avoid ADC switching charge kickback.
Do not exceed 5.5 V on VDD - the 'V' family supports wide Vdd but the absolute maximum is 5.5 V; if you need 6 V or higher rails, add a TVS diode and buck regulator. The PIC24F (non-V) variants top out at 3.6 V, so do not substitute a PIC24F16KM204-I/ML in a 5 V design without adjusting the power tree. The PPS peripheral requires that you explicitly assign every used peripheral signal to a physical pin via the RPINRx/RPORx registers; if you skip this step, all peripherals default to a single set of pins and code will not run as expected.
The on-chip 12-bit ADC achieves its 500 ksps throughput only with a low-impedance input source (< 2 kOhm) - use an external op amp follower stage or the integrated op amps in unity-gain buffer mode if your sensor has higher impedance. Add a 1 kHz RC anti-alias filter at the ADC input pin. For high-accuracy sampling, enable the ADC's early interrupt and DMA burst average mode; this improves SNR by 3 to 6 dB compared with single-shot conversions under noisy PCB environments.
تعمیل کی معلومات
RoHS and REACH compliant per Microchip product page DS30003030C. The -I/ML industrial temperature grade -40C to +85C supports non-safety industrial designs; automotive AEC-Q100 applications typically use PIC24HJ or dsPIC33EP automotive variants.
