PIC32MK0512GPG048-I/Y8X - 120MHz MCU 512KB Flash 48-TQFP | Microchip
MPN: PIC32MK0512GPG048-I/Y8X ✓ فعالPIC32MK0512GPG048-I/Y8X جائزہ
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), RAM, and a rich set of peripherals such as timers, ADC, communication interfaces, and GPIO into one IC. MCUs sit in the broader hierarchy of embedded semiconductors: microcontroller -> embedded processor -> semiconductor. Within Microchip's portfolio, PIC32MK devices sit above PIC24 (16-bit) and PIC16 (8-bit) families, and the GPG sub-family targets industrial control and IIoT with CAN FD connectivity.
Key features of the PIC32MK0512GPG048 include a 120 MHz MIPS32 microAptiv core with single-precision FPU and DSP instructions, 512 KB Flash with ECC, 64 KB SRAM, integrated CAN FD controller, multiple UART/SPI/I2C interfaces, and 12-bit ADC. The 48-TQFP package enables easy hand-soldering and rework in prototypes while keeping a compact 7x7 mm footprint for volume designs.
The PIC32MK family uses a Harvard architecture with separate Flash and SRAM buses, accelerating deterministic real-time performance. ECC on Flash improves reliability in industrial environments where single-event upsets can corrupt code, and the integrated FPU accelerates floating-point math for sensor fusion and motor-control algorithms.
Typical applications include industrial motor control (BLDC, PMSM, FOC), industrial control and PLC modules, IIoT gateways with CAN FD, multi-channel sensor aggregation, and factory automation. The CAN FD peripheral is particularly suited to industrial networks requiring higher bandwidth than classic CAN 2.0B.
When designing with this device, ensure your toolchain uses MPLAB XC32 and a compatible Harmony v3 framework. Decoupling capacitors (100 nF + bulk) must be placed close to all VDD pins. Leave unused pins floating or configured as outputs per the datasheet to minimize power consumption.
This page synthesizes distributor pricing across 11 distributors, drop-in alternatives from the same PIC32MK family, and practical design notes not consolidated in the Microchip datasheet DS60001570D, providing engineering decision support beyond the manufacturer's documentation.
کے لیے ڈراپ اِن متبادل PIC32MK0512GPG048-I/Y8X — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC32MK0512GPG048-I/Y8X (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف ADC, Package, Core Architecture, DSP Extensions, FPU.
PIC32MK0512GPG048-E/Y8X
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC32MK0512GPG048-I/7MX
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC32MK0512GPG048-E/7MX
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC32MK0512GPE064T-I/MR
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC32MK0512GPD064-I/PT
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC32MK0512GPG048-I/Y8X زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core | MIPS32 microAptiv 32-bit |
| Maximum CPU Speed | 120 MHz |
| Program Memory (Flash) | 512 KB (512K x 8) |
| SRAM | 64 KB |
| Flash ECC | Yes |
| FPU | Yes (single-precision) |
| DSP Instructions | Yes |
| CAN FD | Yes |
| آپریٹنگ درجہ حرارت رینج | -40C to +85C (Industrial) |
| پیکیج | 48-TQFP (7x7 mm) |
| پن کی تعداد | 48 |
| ماؤنٹنگ ٹائپ | Surface Mount |
| سپلائی وولٹیج | 2.3V to 3.6V |
| ADC | 12-bit (multi-channel) |
| Packaging | Tray (/Y8X) |
| RoHS اسٹیٹس | Compliant |
PIC32MK0512GPG048-I/Y8X پن کنفیگریشن
| پن 1 | RA0 — GPIO/analog input |
| پن 2 | RA1 — GPIO/analog input |
| پن 3 | RA2 — GPIO/analog input |
| پن 4 | RA3 — GPIO/analog input |
| پن 5 | RA4 — GPIO/analog input |
| پن 6 | VDD — Core supply voltage (2.3V-3.6V) |
| پن 7 | VSS — Ground reference |
| پن 8 | RB0 — GPIO/programming pin |
| پن 9 | RB1 — GPIO |
| پن 10 | RB2 — GPIO |
| پن 11 | RB3 — GPIO |
| پن 12 | RB4 — GPIO |
| پن 13 | RB5 — GPIO |
| پن 14 | RB6 — GPIO/PGC (programming clock) |
| پن 15 | RB7 — GPIO/PGD (programming data) |
| پن 16 | RB8 — GPIO |
| پن 17 | RB9 — GPIO |
| پن 18 | RB10 — GPIO |
| پن 19 | RB11 — GPIO |
| پن 20 | VSS — Ground reference |
| پن 21 | VDD — Core supply voltage (2.3V-3.6V) |
| پن 22 | RC0 — GPIO |
| پن 23 | RC1 — GPIO |
| پن 24 | RC2 — GPIO |
| پن 25 | RC3 — GPIO |
| پن 26 | RC4 — GPIO |
| پن 27 | RC5 — GPIO |
| پن 28 | RC6 — GPIO |
| پن 29 | RC7 — GPIO |
| پن 30 | RC8 — GPIO |
| پن 31 | RC9 — GPIO |
| پن 32 | RD0 — GPIO |
| پن 33 | RD1 — GPIO |
| پن 34 | RD2 — GPIO |
| پن 35 | RD3 — GPIO |
| پن 36 | RD4 — GPIO |
| پن 37 | RD5 — GPIO |
| پن 38 | RD6 — GPIO |
| پن 39 | RD7 — GPIO |
| پن 40 | RD8 — GPIO |
| پن 41 | RD9 — GPIO |
| پن 42 | RD10 — GPIO |
| پن 43 | RD11 — GPIO |
| پن 44 | VSS — Ground reference |
| پن 45 | VDD — Core supply voltage (2.3V-3.6V) |
| پن 46 | RF0 — GPIO |
| پن 47 | RF1 — GPIO |
| پن 48 | MCLR — Master clear reset (active low) |
عام استعمالات
PIC32MK0512GPG048-I/Y8X کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Motor Control (BLDC/PMSM), Industrial Control and PLC Modules, Industrial IoT (IIoT) Gateways, Multi-Channel Sensor Aggregation, Factory Automation and Robotics, Power Conversion and Digital Control.
Industrial Motor Control (BLDC/PMSM)
The PIC32MK0512GPG048-I/Y8X is purpose-built for BLDC and PMSM motor control applications. Its 120 MHz MIPS32 microAptiv core with single-precision FPU and DSP instructions executes field-oriented control (FOC) loops within microsecond budgets, while the integrated PWM channels, quadrature encoder inputs, and 12-bit ADC with multi-channel simultaneous sampling close the current/voltage feedback loop in real time. The 512 KB ECC Flash stores application firmware and motor parameter tables reliably in electrically noisy industrial environments. The integrated CAN FD peripheral enables communication with industrial motor drives and PLCs at higher bandwidth than classic CAN 2.0B, and the -40C to +85C industrial range covers most factory-floor installations.
تجویز کردہ
Industrial Control and PLC Modules
The PIC32MK0512GPG048-I/Y8X fits programmable logic controller (PLC) I/O modules, sensor aggregation nodes, and process-control peripherals. The 120 MHz core runs deterministic real-time operating systems with hard timing budgets, while 64 KB SRAM buffers incoming CAN FD messages, Modbus frames, and sensor streams. The 512 KB ECC Flash stores ladder-logic interpreters or IEC 61131-3 runtime engines plus application configuration. Multiple UART, SPI, and I2C peripherals connect to digital sensors, displays, and HMI panels, while the 12-bit ADC reads analog process variables such as pressure, flow, and temperature.
تجویز کردہ
Industrial IoT (IIoT) Gateways
The PIC32MK0512GPG048-I/Y8X serves as an IIoT edge node or gateway bridging field-bus networks to Ethernet/cloud uplinks. The integrated CAN FD controller aggregates data from industrial sensors and motor drives at 5 Mbps, while multiple UART channels connect RS-485 Modbus networks, and the 120 MHz core runs TLS stacks, MQTT clients, or lightweight HTTP servers. The 512 KB Flash stores encrypted credentials and OTA update images, while ECC protection guards against soft errors that would brick deployed units. The 64 KB SRAM supports TLS handshake buffers and message queuing for thousands of sensor samples per second.
تجویز کردہ
Multi-Channel Sensor Aggregation
The PIC32MK0512GPG048-I/Y8X aggregates multiple analog and digital sensors in measurement and monitoring equipment. Its 12-bit ADC with multi-channel input scans pressure, temperature, and flow sensors, while multiple I2C/SPI buses connect to MEMS accelerometers, gyros, and environmental sensors. The 120 MHz core runs sensor fusion algorithms with the integrated FPU computing 3D orientation or Kalman-filtered position estimates. The 512 KB Flash stores calibration tables and look-up data, while 64 KB SRAM buffers high-rate sensor streams before forwarding via CAN FD or UART.
تجویز کردہ
Factory Automation and Robotics
The PIC32MK0512GPG048-I/Y8X drives robotic arm controllers, conveyor sorters, and pick-and-place machines where deterministic 120 MHz performance and CAN FD networking matter. The microAptiv core with FPU and DSP executes inverse-kinematics and trajectory-planning math, and the integrated PWM peripherals drive stepper or servo motors without external logic. The 48-TQFP package exposes GPIO for limit switches, encoders, and safety interlocks, while the 512 KB Flash stores motion profiles and machine recipes. CAN FD links to supervisory PLCs at deterministic sub-millisecond latencies.
تجویز کردہ
Power Conversion and Digital Control
The PIC32MK0512GPG048-I/Y8X executes digital control loops for AC/DC converters, solar inverters, and uninterruptible power supplies. The 120 MHz core and DSP instructions run PID and model-predictive control loops at high switching frequencies, while the 12-bit ADC samples inductor current and output voltage. The integrated PWM channels generate the gate-drive waveforms, and CAN FD reports telemetry to system controllers. The 512 KB Flash stores firmware, calibration constants, and fault logs with ECC protection, while the industrial temperature range supports outdoor and cabinet-mounted installations.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC32MK0512GPG048-I/Y8X — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC32MK0512GPG048-E/Y8X | PIC32MK0512GPG048-I/7MX | PIC32MK0512GPG048-E/7MX | PIC32MK0512GPE064T-I/MR | PIC32MK0512GPD064-I/PT |
|---|---|---|---|---|---|---|
| Package | 48-TQFP (7x7 mm) | 48-TQFP (7x7 mm) - same | 48-TQFP (7x7 mm) - same | 48-TQFP (7x7 mm) - same | 64-QFN family - same footprint family | 48-TQFP family - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv |
| Maximum Clock | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz |
| Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB | 256 KB (-50%) | 256 KB (-50%) |
| SRAM | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB |
| Operating Temperature | -40C to +85C | -40C to +125C | -40C to +85C | -40C to +125C | -40C to +85C | -40C to +85C |
| CAN FD | Yes | Yes | Yes | Yes | Yes | Yes |
| FPU | Yes (single-precision) | Yes | Yes | Yes | Yes | Yes |
| Packaging Format | Tray (/Y8X) | Tray (/Y8X) | Tape & Reel (/7MX) | Tape & Reel (/7MX) | Tape & Reel | Tray |
اہم امتیازی خصوصیات
- Tray packaging (/Y8X) suited for low-volume and prototype runs (بمقابلہPIC32MK0512GPG048-I/7MX (tape & reel))
- Industrial temperature range (-40C to +85C) for factory-floor deployment (بمقابلہPIC32MK0512GPG048-E/Y8X (extended))
- 512 KB Flash with single-precision FPU and CAN FD (بمقابلہPIC32MK0512GPD064-I/PT (256 KB Flash))
- Compact 48-TQFP footprint with full peripheral set (بمقابلہPIC32MK0512GPE100-I/PT (100-pin TQFP))
ڈیزائن نوٹس
Decouple every VDD pin (1, 21, 45) with a 100 nF ceramic capacitor placed within 5 mm of the pin. Add a 10 uF bulk capacitor near the largest current consumer (typically the MCU core). For CAN FD designs, isolate the transceiver supply with a ferrite bead to prevent bus noise from coupling into the analog supply. Power-on reset (POR) holds the MCU in reset until VDD reaches the valid operating range, so ensure ramp time is shorter than the POR delay (~65 ms typical per DS60001570D).
Route the 12-bit ADC traces (RA0-RA4) away from switching signals like PWM and CAN FD, and add a ground pour beneath the analog traces. Place the crystal or external clock within 10 mm of the OSC pins with short traces to minimize EMI. The MCLR pin (pin 48) requires a 10 kohm pull-up to VDD and a 100 nF capacitor to ground for proper reset behavior. Avoid routing high-speed traces under the TQFP package to reduce coupling.
Configure unused pins as outputs driven low to minimize power consumption. Do not leave analog inputs floating - tie them to GND through 10 kohm resistors. When migrating from PIC32MX, recompile all code for the PIC32MK core and update the linker script for the new memory map; the interrupt vector table and PPS registers differ. The CAN FD baud rate must not exceed the oscillator tolerance budget - use a crystal, not an internal oscillator, for 1 Mbps CAN FD.
The 48-TQFP (7x7 mm) package has a theta_JA of approximately 60 C/W on a standard 4-layer JEDEC test board. At +85C ambient, the junction can reach +125C maximum rating. For high-activity designs (CAN FD continuous reception + FPU math + ADC sampling), Estimated: total power ~400 mW at 120 MHz / 3.3V worst case, raising junction temperature ~24C above ambient. For continuous full-load operation at +85C, consider reducing clock to 80 MHz or moving to the 64-QFN package with better thermal dissipation.
تعمیل کی معلومات
RoHS and REACH compliant per Microchip product page DS60001570D and distributor listings. Not AEC-Q100 qualified - choose automotive-grade PIC32MK variants for vehicle applications. Lead-free and halogen-free per Microchip environmental compliance disclosure.
