PIC32MX534F064L-V/BG - 80MHz MIPS32 M4K MCU, 64KB Flash, USB-OTG | Microchip
MPN: PIC32MX534F064L-V/BG ✓ فعالPIC32MX534F064L-V/BG جائزہ
A microcontroller (MCU) is an integrated circuit that combines a CPU core, volatile and non-volatile memory, and a rich set of peripherals on a single die, forming the compute backbone of embedded systems. PIC32MX5xx devices sit within Microchip's PIC32 family (a superset of MIPS32 M4K cores) and belong to the broader 32-bit MCU segment of the power-management and embedded-control hierarchy. They typically follow an LDO -> linear regulator -> voltage regulator -> power management IC-style of on-chip power management, supplying internal logic rails from a single 2.3 V to 3.6 V external supply.
Key differentiating features of the PIC32MX534F064L-V/BG include its combination of full-speed USB-OTG (with on-chip transceiver and dedicated DMA channels), integrated CAN 2.0B, parallel master port (PMP) for external bus interfacing, and five 16-bit timers/compare-capture-PWM modules. The 80 MHz core delivers 1.56 DMIPS/MHz (MIPS32 M4K superscalar architecture), sufficient for TCP/IP stacks and modest DSP-style signal processing. Code execution is accelerated by a prefetch cache and a tightly-coupled RAM region to hide Flash latency.
Typical applications include industrial USB-to-CAN bridges, factory automation nodes, HMI panels with PMP-driven TFTs, low-cost motor-control front-ends, and USB peripherals such as data loggers and HID devices. The 121-ball BGA package supports high-density PCB layouts while maintaining access to the full peripheral set.
When designing with this device, ensure the 0.8 mm pitch BGA is matched to a PCB with appropriate via-in-pad or dog-bone fan-out to keep routing manageable. The -V variant's +105C ceiling allows placement near heat sources but still requires thermal derating above sustained 70 mA GPIO loads.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that the bare Microchip datasheet does not aggregate, helping engineers select the right part faster.
کے لیے ڈراپ اِن متبادل PIC32MX534F064L-V/BG — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC32MX534F064L-V/BG (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, ADC, DMA Channels, Core Architecture, USB.
PIC32MX534F064L-I/BG
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC32MX534F064LT-V/BG
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC32MX564F064L-V/BG
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC32MX534F064H-V/PT
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC32MX460F512L-80V/BG
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC32MX450F256L-V/PF
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC32MX360F512L-80V/BG
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC32MX534F064L-V/BG زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core Architecture | MIPS32 M4K (32-bit, superscalar) |
| زیادہ سے زیادہ کلاک فریکوئنسی | 80 MHz |
| Performance | 1.56 DMIPS/MHz (MIPS32 M4K) |
| Flash Program Memory | 64 KB (64K x 8) |
| SRAM | 16 KB |
| Operating Voltage | 2.3 V to 3.6 V |
| USB | USB 2.0 Full-Speed OTG with on-chip transceiver |
| CAN | CAN 2.0B active |
| ADC | 10-bit, up to 16 channels, 1 Msps |
| DMA | Yes (8-channel DMA controller) |
| Timers | Five 16-bit Timer/Counter modules |
| Parallel Master Port (PMP) | Yes (8/16-bit external bus) |
| آپریٹنگ درجہ حرارت رینج | -40C to +105C (-V industrial grade) |
| پیکیج | 121-ball TFBGA (10x10 mm, 0.8 mm pitch) |
| RoHS اسٹیٹس | Compliant |
PIC32MX534F064L-V/BG 121-ball tfbga (10x10 mm, 0.8 mm pitch) پن کنفیگریشن گائیڈ
PIC32MX534F064L-V/BG (121-ball tfbga (10x10 mm, 0.8 mm pitch) پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں PIC32MX534F064L-V/BG.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
PIC32MX534F064L-V/BG کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial USB-to-CAN Bridge, Human-Machine Interface (HMI) Panel, Factory Automation Sensor Node, Low-Cost Motor Control Front-End, USB Data Logger / HID Device, Medical Patient Monitor (Non-Critical).
Industrial USB-to-CAN Bridge
The PIC32MX534F064L-V/BG is purpose-built for industrial USB-to-CAN bridges. Its full-speed USB-2.0 OTG controller with on-chip transceiver pairs with the integrated CAN 2.0B module, both fed by an 8-channel DMA controller that offloads message movement from the 80 MHz MIPS32 M4K core per the Microchip datasheet. With 64 KB Flash and 16 KB SRAM it runs Microchip's TCP/IP + CANopen or J1939 stacks simultaneously. The -40C to +105C operating range handles sealed industrial cabinets and under-hood automotive compartments without thermal derating.
تجویز کردہ
Human-Machine Interface (HMI) Panel
HMI panels benefit from the PIC32MX534F064L-V/BG's Parallel Master Port (PMP), which drives TFT-LCD displays up to 16-bit parallel with DMA-managed framebuffer refresh per the Microchip datasheet. The 80 MHz core sustains LVGL-style graphics while USB-OTG supports capacitive-touch HID-class input. Sixteen ADC channels capture analog keypad or rotary inputs, while five 16-bit timer/compare/PWM modules drive LED backlight brightness and haptic feedback. The 121-ball TFBGA footprint fits compact 4-inch panel designs.
تجویز کردہ
Factory Automation Sensor Node
Factory automation nodes leverage the PIC32MX534F064L-V/BG's combination of CAN 2.0B for fieldbus communication, USB-OTG for local configuration, and 16-channel 10-bit ADC at 1 Msps for sensor digitization per the Microchip datasheet. The 8-channel DMA moves conversion data into SRAM without CPU intervention, leaving the 80 MHz core free for control loops. On-chip PMP can attach parallel memory for data logging. Industrial -40C to +105C ambient tolerance allows direct cabinet mounting.
تجویز کردہ
Low-Cost Motor Control Front-End
Motor control front-ends use the PIC32MX534F064L-V/BG's five 16-bit timers with PWM output to drive three-phase or DC-brushed motor bridges per the Microchip datasheet. The 10-bit 1 Msps ADC samples back-EMF and current-sense signals, while the DMA controller streams conversion results into SRAM for field-oriented control loops on the 80 MHz MIPS32 M4K core. USB-OTG enables parameter tuning over CDC-class serial, and CAN provides industrial-bus feedback. Extended -40C to +105C range suits motor-cabinet environments.
تجویز کردہ
USB Data Logger / HID Device
USB data loggers and HID devices benefit from the PIC32MX534F064L-V/BG's full-speed USB-OTG with on-chip transceiver and DMA offload, allowing the 80 MHz MIPS32 M4K core to handle application logic while USB traffic flows independently per the Microchip datasheet. The 16 KB SRAM buffers incoming HID reports or log records before Flash writes, while 64 KB Flash stores Microchip Harmony firmware plus a small bootloader. The -40C to +105C range supports outdoor and automotive-cabin HID accessories.
تجویز کردہ
Medical Patient Monitor (Non-Critical)
Non-critical medical patient monitors leverage the PIC32MX534F064L-V/BG's 10-bit 1 Msps ADC for vital-sign signal acquisition (temperature, pulse oximetry analog front-ends) per the Microchip datasheet. USB-OTG connects to a host PC for data visualization, while CAN broadcasts patient data on ward networks. The 80 MHz MIPS32 M4K runs filtering algorithms in firmware with DMA-accelerated sample transfer. The -40C to +105C range covers clinical-environment ambient swings. Note: FDA Class II/III designs require additional IEC 60601-1 isolation not provided by this MCU alone.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC32MX534F064L-V/BG — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC32MX534F064L-I/BG | PIC32MX564F064L-V/BG | PIC32MX460F512L-80V/BG |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TFBGA-121 (10x10 mm) | TFBGA-121 (10x10 mm) - same | TFBGA-121 (10x10 mm) - same | TFBGA-121 (10x10 mm) - same |
| Core Architecture | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit |
| Maximum Clock Frequency | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 512 KB |
| SRAM | 16 KB | 16 KB | 64 KB | 32 KB |
| USB-OTG | Yes (Full-Speed, on-chip transceiver) | Yes (Full-Speed, on-chip transceiver) | Yes (Full-Speed, on-chip transceiver) | Yes (Full-Speed, on-chip transceiver) |
| CAN | CAN 2.0B | CAN 2.0B | CAN 2.0B | No |
| Operating Temperature | -40C to +105C (-V) | -40C to +85C (-I) | -40C to +105C (-V) | -40C to +105C (-V) |
اہم امتیازی خصوصیات
- Extended -40C to +105C temperature grade in TFBGA-121 (بمقابلہPIC32MX534F064L-I/BG)
- Combined USB-OTG plus CAN 2.0B on a single 80 MHz core (بمقابلہPIC32MX460F512L-80V/BG)
- Compact 121-ball TFBGA with full peripheral access (بمقابلہPIC32MX534F064H-V/PT (TQFP-144))
ڈیزائن نوٹس
Estimated: the 121-ball TFBGA at 0.8 mm pitch requires 4-layer PCB with via-in-pad or dog-bone fan-out. Each ball carries roughly 50 mA max, so internal power balls (VDD/VSS) must be stitched with multiple vias to inner copper planes. Keep out zones beneath BGA should be filled with ground-plane thermal relief. Production yields drop sharply above 0.8 mm pitch without ENIG surface finish.
Estimated: at 80 MHz with full USB and CAN activity, VDD core current peaks near 70 mA at 3.3 V. Place 100 nF decoupling on every AVDD/VDD ball pair, plus a 4.7 uF bulk capacitor within 5 mm of the BGA. USB transceiver supply (VBUS) needs its own 10 uF bulk per USB 2.0 spec. If powering from a 5 V rail, an LDO (e.g. MCP1700) provides cleaner ripple than a buck for the 80 MHz PLL.
Estimated: continuous full-speed USB traffic with 80 MHz core draws roughly 230 mW of dissipation. On a 4-layer 1 oz copper board the TFBGA-121 has theta_JA of about 35 C/W, producing roughly 8 C junction rise above ambient. The -V variant's +105C ceiling provides comfortable margin. Avoid sealing the BGA under a thermal blanket without copper thermal vias to inner planes.
Do not skip the PLL configuration sequence in OSCCON before peripheral bring-up, or USB-OTG enumeration will fail intermittently. The Configuration Words (DEVCFG1/2/3) must be programmed to enable JTAG vs. ICE debug correctly. The 10-bit ADC reference voltage must be tied to a clean AVDD; using VDD as reference introduces switching noise on USB-powered rails.
تعمیل کی معلومات
RoHS/REACH compliant per Microchip product page. -V suffix denotes industrial temperature grade (-40C to +105C), not AEC-Q100 qualified; AEC-Q100 variants not officially listed in this family. Halogen-free status not stated in provided data.
