R5F10PGGKFB#V5 - 16-Bit 48 MHz RL78/F14 MCU | Renesas
MPN: R5F10PGGKFB#V5 ✓ فعالR5F10PGGKFB#V5 جائزہ
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, timers, communication controllers, analog interfaces, and GPIO into one compact device. The RL78 series combines a 16-bit architecture with energy-saving instructions and peripheral integration. Within the product hierarchy, the R5F10PGGKFB#V5 belongs to the RL78/F14 family, which extends the RL78/F13 with expanded automotive interfaces, motor-control support, and functional-safety-oriented features.
Key characteristics include an RL78 16-bit CPU, operation up to 48 MHz, as many as 48 KB of code flash, CAN and LIN interface support, timer resources for motor control, and a low-consumption design. The family also supports comparator-based and other analog functions that can reduce the need for external components. Its 48-pin LFQFP package provides enough I/O and peripheral connectivity for a body-control module, instrument cluster, gateway, or compact industrial controller.
The part number suffix identifies the particular orderable configuration. The #V5 version appears in distributor catalogs alongside closely related #X5, #H5, and base-family variants. Engineers should confirm the exact suffix, package, temperature grade, and qualification requirements against the Renesas ordering information before releasing a production BOM.
Typical uses include automotive body electronics, CAN-based sensor nodes, LIN sub-networks, brushless DC motor control, and low-power embedded modules. The built-in communications reduce wiring and processor overhead, while the timer and comparator resources can support motor-current sensing, diagnostics, and safety monitoring.
For PCB design, use the manufacturer land pattern and pin-description table rather than inferring peripheral assignments from the package position. Decoupling should be placed close to the supply pins, external clock and reset networks should follow the recommended reference circuit, and unused inputs should be configured according to the hardware manual. Functional-safety designs also require review of the safety manual and appropriate diagnostic coverage.
This product page combines the exact R5F10PGGKFB#V5 ordering information, package context, application guidance, compatibility considerations, and design references to support faster component selection and hardware planning.
کے لیے ڈراپ اِن متبادل R5F10PGGKFB#V5 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں R5F10PGGKFB#V5 (یکساں فارم فیکٹر اور فٹ پرنٹ).
R5F10PGGKFB#X5
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
R5F10PGJKFB#V5
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →R5F10PGHKFB#X5
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
R5F10PPGKFB#V5
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
R5F10BGGKFB
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
R5F10PGGKFB#V5 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | 16-bit embedded microcontroller |
| Series | RL78/F14 |
| Maximum Core Clock | 48 MHz |
| Core Architecture | RL78 16-bit |
| Code Flash Memory | Up to 48 KB |
| Communication Interfaces | CAN and LIN modules |
| Motor-Control Support | BLDC motor control with timer RD, comparator, and functional-safety features |
| پیکیج | 48-pin LFQFP |
| ماؤنٹنگ ٹائپ | Surface mount |
R5F10PGGKFB#V5 48-pin lfqfp پن کنفیگریشن گائیڈ
R5F10PGGKFB#V5 (48-pin lfqfp پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں R5F10PGGKFB#V5.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
R5F10PGGKFB#V5 کے لیے موزوں ہے 6 ایپلیکیشنs: Automotive Body Control Module, CAN Sensor Gateway, LIN Subnetwork Controller, BLDC Motor Controller, Industrial Equipment Controller, Low-Power Sensor Node.
Automotive Body Control Module
The R5F10PGGKFB#V5 fits an automotive body-control module because its RL78/F14 platform combines a 16-bit core running up to 48 MHz with CAN and LIN modules in a 48-pin LFQFP package. The controller can consolidate lamp, switch, lock, and sensor-management logic while reducing external wiring. Its 48 KB maximum flash allocation supports boot code, diagnostics, communication stacks, and application routines. The low-consumption RL78 architecture is particularly useful in vehicles where modules spend extended periods in low-activity states. Implementation still requires external CAN and LIN transceivers, protected input conditioning, and careful validation of the module's diagnostic and functional-safety behavior.
تجویز کردہ
CAN Sensor Gateway
R5F10PGGKFB#V5 can serve as a gateway between CAN-connected sensors and a LIN subnetwork or an internal serial interface. Its 48 MHz RL78 core provides timing headroom for protocol processing, while integrated CAN and LIN controllers reduce software and board-space requirements. The 48-pin LFQFP package offers access to the communication signals, timers, and GPIO needed for status handling and local I/O. A practical implementation should include bus protection, proper termination, isolated or non-isolated transceiver selection as required, and firmware checks for bus-off recovery. The exact peripheral mapping must be assigned from the manufacturer pin-description table for this suffix.
تجویز کردہ
LIN Subnetwork Controller
The R5F10PGGKFB#V5 is appropriate for a LIN subnetwork controller because the RL78/F14 family includes a dedicated LIN module and low-power operating characteristics. It can coordinate inexpensive LIN-connected switches, seat controls, climate-control nodes, and other distributed accessories while retaining CAN connectivity for a higher-level vehicle network. The 48-pin LFQFP footprint provides room for transceiver interfaces, diagnostics, timers, and control outputs. Firmware should implement correct LIN timing, wake-up behavior, checksum handling, and fault recovery. A LIN transceiver and the appropriate reverse-battery, load-dump, and ESD protection must be added outside the microcontroller.
تجویز کردہ
BLDC Motor Controller
The R5F10PGGKFB#V5 supports a BLDC motor-control design through its timer RD, comparator, and other timer resources. These peripherals can help manage commutation timing, compare position information, detect current thresholds, and identify abnormal motor states. The 48 MHz maximum core clock gives the firmware capacity for control loops, diagnostics, and communication services beyond the basic commutation task. The MCU does not directly drive the motor phase power stage; designers must use suitable gate drivers, power transistors, current sensing, and protection. A robust design also needs a defined safe shutdown path and validation across speed, temperature, supply, and fault conditions.
تجویز کردہ
Industrial Equipment Controller
The R5F10PGGKFB#V5 can serve as a low-power controller in compact industrial equipment where a 16-bit MCU, embedded flash, and automotive-style communication are useful. The RL78/F14 platform can coordinate digital inputs, sensor conditioning, actuator outputs, and service diagnostics within a 48-pin LFQFP footprint. Its low-consumption architecture is advantageous in equipment that spends substantial time monitoring rather than computing continuously. For industrial deployment, engineers should confirm supply limits, temperature grade, ESD protection, isolation requirements, and functional-safety expectations. The CAN and LIN interfaces also permit integration into larger machine-control hierarchies without assigning every low-level task to a separate communications processor.
تجویز کردہ
Low-Power Sensor Node
The R5F10PGGKFB#V5 can form the core of a low-power sensor node when the design benefits from local 16-bit processing, embedded flash, and CAN or LIN connectivity. On-board processing can filter measurements, apply thresholds, update counters, and transmit compact diagnostic data instead of sending every raw sample over the network. The 48-pin LFQFP package leaves pins available for sensor interfaces, discrete status indicators, and communication transceivers. Power-management design should place the MCU in its appropriate low-power modes, disable unused peripherals, and control external loads with GPIO. Wake sources, startup timing, and bus sleep behavior must be coordinated carefully to prevent data loss or unnecessary vehicle-network traffic.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا R5F10PGGKFB#V5 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | R5F10PGGKFB#X5 | R5F10PGJKFB#V5 | R5F10PGHKFB#X5 | R5F10PPGKFB#V5 | R5F10BGGKFB |
|---|---|---|---|---|---|---|
| Package | 48-pin LFQFP | 48-pin LFQFP | 48-pin LFQFP | 48-pin LFQFP | 48-pin LFQFP | 48-pin LQFP |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Product Series | RL78/F14 | RL78/F14 | RL78/F14 | RL78/F14 | RL78/F14 | RL78 |
| Ordering Suffix | #V5 | #X5 | #V5 with J family code | #X5 with H family code | #V5 with P family code | Base ordering code |
اہم امتیازی خصوصیات
- Higher clock ceiling than the 24 MHz B-series candidate (بمقابلہR5F10BGGKFB)
- Closest ordering-code configuration (بمقابلہR5F10PGGKFB#X5)
- Automotive communication integration (بمقابلہR5F10BGGKFB)
ڈیزائن نوٹس
Use the exact 48-pin LFQFP land pattern associated with the manufacturer package drawing. Place all decoupling capacitors adjacent to the intended supply and ground pins, with short ground returns and no plane interruption beneath the device where the package guidance permits. Preserve copper for thermal dissipation, but avoid long serpentine routes between power, ground, and sensitive signal pins. Verify the exposed or thermal structure against the selected package variant rather than relying only on the generic LQFP-48 library outline.
Follow the manufacturer reference circuit for supply capacitance, regulator routing, reset circuitry, and clock components. The RL78/F14 can operate from an automotive-style environment where transient protection, reverse-battery behavior, and load dump are system-level concerns. Keep the MCU supply filtering close to the device and coordinate external protection so normal startup and ADC measurements remain within the electrical limits. Program unused GPIO inputs to a defined state before enabling the associated peripheral functions.
Do not treat family members with the same PKF package as automatically interchangeable. The R5F10PGGKFB#X5, R5F10PGJKFB#V5, R5F10PGHKFB#X5, and R5F10PPGKFB#V5 catalog entries may differ in flash capacity, peripheral population, qualification, or orderable suffix. Before substitution, compare the pin-description table, electrical characteristics, memory map, peripheral register set, clock limits, and safety documentation. Preserve the exact suffix in purchasing documentation to avoid receiving a configuration with different production requirements.
تعمیل کی معلومات
The RL78/F14 family is positioned for automotive applications, but the exact compliance declarations and qualification status of the R5F10PGGKFB#V5 ordering code must be confirmed in the manufacturer product and quality documentation.