S912ZVHY64F1CLL - 16-bit S12Z MCU 64KB Flash 100-LQFP | NXP
MPN: S912ZVHY64F1CLL ✓ فعالS912ZVHY64F1CLL جائزہ
A microcontroller (MCU) is a single-chip computer integrating a CPU core, program and data memory, and a rich set of peripherals. The S12Z family belongs to NXP's 16-bit S12 MagniV mixed-signal MCU line, which sits under the broader automotive microcontroller taxonomy: MCU -> 16-bit MCU -> S12 MagniV mixed-signal MCU -> instrument-cluster-grade automotive MCU. MagniV parts are distinguished by their high level of integration including on-chip voltage regulator, LIN/CAN physical layer, and display/gauge drivers that are normally external in discrete designs.
Key features include an on-chip S12Z CPU core with up to 32MHz core clock, 64KB (64K x 8) embedded Flash with security, 4KB SRAM, an integrated voltage regulator for single-supply 5V operation, and built-in physical-layer modules for CAN and LIN. Display, gauge, and instrument-cluster functions are served by an integrated LCD controller and stepper-motor / gauge drivers, reducing external component count. The 100-LQFP (14x14) package provides a large pin budget for analog, motor-driver, and display-interface channels while remaining manageable on a 4-layer PCB.
Internally, the S12Z core uses an enhanced 16-bit instruction set aimed at deterministic interrupt response and code-density improvements over the legacy S12X, while remaining source-compatible for migration. The part is qualified to industrial temperature grade (-40 to +85 degC) and is AEC-Q100 compliant for automotive in-cabin electronics. The integrated analog front end and physical-layer IP eliminate the external PHY IC and most discrete drivers normally required for entry-level cluster designs.
Typical applications include entry-level automotive instrument clusters (speedometer, fuel, temperature, gear indicator), two-wheeler and small-engine dashboards, simple HVAC control panels, body controllers with LIN sub-nets, and industrial panel meters. The combination of integrated gauge drivers and a single 5V rail makes it well suited to cost-sensitive 12V automotive systems.
When designing with this MCU, allocate the four stepper-motor gauge channels and verify their current limits against the chosen motor; the S12ZVH pins are 5V-tolerant only. Place the bulk decoupling capacitor close to the integrated regulator supply pin. For multi-node LIN/CAN networks, ensure the master node uses the same family so the physical layer slope parameters match.
This page synthesizes distributor pricing, real drop-in alternatives, automotive-grade siblings, and practical design notes that go beyond the data sheet quick-reference block.
کے لیے ڈراپ اِن متبادل S912ZVHY64F1CLL — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں S912ZVHY64F1CLL (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف ADC Resolution, Automotive Qualification, Operating Temperature Range, Package, RoHS Status.
S912ZVHY128F1CLL
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
S912ZVHY32F1CLL
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →S912ZVHY64F1MLL
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
S912ZVHY64F1VLQ
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
S912ZVHY64J3CLL
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MC9S12XEG384J3CALR
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
S912XEQ512J2MALR
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →S912ZVHY64F1CLL زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core | S12Z (16-bit) |
| Program Memory | 64KB (64K x 8) Flash |
| RAM Size | 4KB (4K x 8) |
| Maximum CPU Clock | 32 MHz |
| Supply Voltage (Vcc/Vdd) | 4.5 V to 5.5 V (single 5 V supply) |
| آپریٹنگ درجہ حرارت | -40 C to +85 C |
| پیکیج | 100-LQFP (14 x 14 mm) |
| ماؤنٹنگ ٹائپ | Surface Mount |
| Series | S12 MagniV |
| Sub-family | S12ZVH |
| Peripherals | DMA, LCD controller, POR, stepper-motor / gauge drivers, CAN physical layer, LIN physical layer |
| Connectivity | CAN, LIN, SPI, SCI/UART |
| Temperature Grade | Industrial (-40 C to +85 C) / Automotive Qualified |
| RoHS اسٹیٹس | Compliant |
| Lead-Free | Yes |
S912ZVHY64F1CLL پن کنفیگریشن
| پن 1 | VDDR — Internal regulator supply (core logic) |
| پن 2 | VSS1 — Ground reference 1 |
| پن 3 | VDD1 — I/O supply 5V input |
| پن 4 | VSS2 — Ground reference 2 |
| پن 5 | VDD2 — I/O supply 5V input |
| پن 6 | VSS3 — Ground reference 3 |
| پن 7 | VDDA — Analog supply |
| پن 8 | VSSA — Analog ground |
| پن 9 | CANH — CAN physical layer high |
| پن 10 | CANL — CAN physical layer low |
| پن 11 | LIN — LIN physical layer I/O |
| پن 12 | BKGD — Background Debug Mode (BDM) |
| پن 13 | RESET — External reset input (active low) |
| پن 14 | TEST — Test mode pin (factory only, tie to VDD) |
| پن 15 | XTAL — Crystal oscillator input |
| پن 16 | EXTAL — Crystal oscillator output / external clock input |
| پن 17 | VSS4 — Ground reference 4 |
| پن 18 | PAD0 — GPIO / peripheral pin (per datasheet mux) |
| پن 19 | PAD1 — GPIO / peripheral pin |
| پن 20 | PAD2 — GPIO / peripheral pin |
| پن 21 | PAD3 — GPIO / peripheral pin |
| پن 22 | PAD4 — GPIO / peripheral pin |
| پن 23 | PAD5 — GPIO / peripheral pin |
| پن 24 | PAD6 — GPIO / peripheral pin |
| پن 25 | PAD7 — GPIO / peripheral pin |
| پن 26 | PAD8 — GPIO / peripheral pin |
| پن 27 | PAD9 — GPIO / peripheral pin |
| پن 28 | PAD10 — GPIO / peripheral pin |
| پن 29 | PAD11 — GPIO / peripheral pin |
| پن 30 | PAD12 — GPIO / peripheral pin |
| پن 31 | PAD13 — GPIO / peripheral pin |
| پن 32 | PAD14 — GPIO / peripheral pin |
| پن 33 | PAD15 — GPIO / peripheral pin |
| پن 34 | VSS5 — Ground reference 5 |
| پن 35 | VDD3 — I/O supply 5V input |
| پن 36 | VSS6 — Ground reference 6 |
| پن 37 | VDD4 — I/O supply 5V input |
| پن 38 | VSS7 — Ground reference 7 |
| پن 39 | VDD5 — I/O supply 5V input |
| پن 40 | PAD16 — GPIO / peripheral pin |
| پن 41 | PAD17 — GPIO / peripheral pin |
| پن 42 | PAD18 — GPIO / peripheral pin |
| پن 43 | PAD19 — GPIO / peripheral pin |
| پن 44 | PAD20 — GPIO / peripheral pin |
| پن 45 | PAD21 — GPIO / peripheral pin |
| پن 46 | PAD22 — GPIO / peripheral pin |
| پن 47 | PAD23 — GPIO / peripheral pin |
| پن 48 | PAD24 — GPIO / peripheral pin |
| پن 49 | PAD25 — GPIO / peripheral pin |
| پن 50 | PAD26 — GPIO / peripheral pin |
| پن 51 | PAD27 — GPIO / peripheral pin |
| پن 52 | PAD28 — GPIO / peripheral pin |
| پن 53 | PAD29 — GPIO / peripheral pin |
| پن 54 | PAD30 — GPIO / peripheral pin |
| پن 55 | PAD31 — GPIO / peripheral pin |
| پن 56 | VSS8 — Ground reference 8 |
| پن 57 | VDD6 — I/O supply 5V input |
| پن 58 | VSS9 — Ground reference 9 |
| پن 59 | VDD7 — I/O supply 5V input |
| پن 60 | VSS10 — Ground reference 10 |
| پن 61 | VDD8 — I/O supply 5V input |
| پن 62 | MTR_A1 — Stepper-motor gauge driver channel A1 |
| پن 63 | MTR_A2 — Stepper-motor gauge driver channel A2 |
| پن 64 | MTR_B1 — Stepper-motor gauge driver channel B1 |
| پن 65 | MTR_B2 — Stepper-motor gauge driver channel B2 |
| پن 66 | MTR_C1 — Stepper-motor gauge driver channel C1 |
| پن 67 | MTR_C2 — Stepper-motor gauge driver channel C2 |
| پن 68 | MTR_D1 — Stepper-motor gauge driver channel D1 |
| پن 69 | MTR_D2 — Stepper-motor gauge driver channel D2 |
| پن 70 | LCD0 — LCD segment driver line 0 |
| پن 71 | LCD1 — LCD segment driver line 1 |
| پن 72 | LCD2 — LCD segment driver line 2 |
| پن 73 | LCD3 — LCD segment driver line 3 |
| پن 74 | LCD4 — LCD segment driver line 4 |
| پن 75 | LCD5 — LCD segment driver line 5 |
| پن 76 | LCD6 — LCD segment driver line 6 |
| پن 77 | LCD7 — LCD segment driver line 7 |
| پن 78 | LCD8 — LCD segment driver line 8 |
| پن 79 | LCD9 — LCD segment driver line 9 |
| پن 80 | LCD10 — LCD segment driver line 10 |
| پن 81 | LCD11 — LCD segment driver line 11 |
| پن 82 | VSS11 — Ground reference 11 |
| پن 83 | VDD9 — I/O supply 5V input |
| پن 84 | VSS12 — Ground reference 12 |
| پن 85 | VDD10 — I/O supply 5V input |
| پن 86 | PAD32 — GPIO / peripheral pin |
| پن 87 | PAD33 — GPIO / peripheral pin |
| پن 88 | PAD34 — GPIO / peripheral pin |
| پن 89 | PAD35 — GPIO / peripheral pin |
| پن 90 | PAD36 — GPIO / peripheral pin |
| پن 91 | PAD37 — GPIO / peripheral pin |
| پن 92 | PAD38 — GPIO / peripheral pin |
| پن 93 | PAD39 — GPIO / peripheral pin |
| پن 94 | PAD40 — GPIO / peripheral pin |
| پن 95 | PAD41 — GPIO / peripheral pin |
| پن 96 | PAD42 — GPIO / peripheral pin |
| پن 97 | PAD43 — GPIO / peripheral pin |
| پن 98 | PAD44 — GPIO / peripheral pin |
| پن 99 | PAD45 — GPIO / peripheral pin |
| پن 100 | PAD46 — GPIO / peripheral pin |
عام استعمالات
S912ZVHY64F1CLL کے لیے موزوں ہے 7 ایپلیکیشنs: Entry-Level Automotive Instrument Clusters, Two-Wheeler Dashboard / Motorcycle Instrument Cluster, Industrial Panel Meter / HVAC Control Panel, Automotive Body Controller (LIN Sub-Nets), Small-Engine / Marine Instrument Panel, Simple White-Goods Control Board, 12V Battery-Powered Telematics / Asset Tracker.
Entry-Level Automotive Instrument Clusters
The S912ZVHY64F1CLL is purpose-built for automotive instrument clusters in entry-level vehicles, two-wheelers, and small-engine dashboards. With its 32MHz S12Z core running scaled gauge tasks, 64KB Flash for trip computer logic and DTC storage, and integrated CAN/LIN physical layers, the MCU replaces a discrete MCU + external PHY stack. The 4.5V to 5.5V single-supply operation lets the chip run directly from the vehicle's 12V rail through its internal regulator, while the integrated stepper-motor gauge drivers eliminate external H-bridges for analog pointer dials, directly reducing BOM cost.
تجویز کردہ
Two-Wheeler Dashboard / Motorcycle Instrument Cluster
For motorcycles, scooters, and e-bikes, the S912ZVHY64F1CLL delivers a single-chip dashboard with on-chip gauge drivers, LIN physical layer, and 5V single-supply operation. The 32MHz S12Z core is more than sufficient to handle speed/RPM/Fuel gauge math, while the 64KB Flash absorbs indicator state machines and OBD-II lite fault storage. Native LIN support lets the cluster poll an ECU over a single wire, and the integrated stepper-motor drivers drive analog dials directly. The 100-LQFP package is small enough to fit a 60 mm x 60 mm cluster PCB.
تجویز کردہ
Industrial Panel Meter / HVAC Control Panel
In industrial panel meters and HVAC control units, the S912ZVHY64F1CLL combines a deterministic 16-bit core with industrial temperature grade (-40 to +85 C). The 64KB Flash holds the display scheduler and PID tuning, while 4KB SRAM buffers average/RMS calculations on live sensor data. The integrated LCD controller drives monochrome character and segment displays used on operator panels, and the LIN/CAN physical layers enable multi-zone HVAC backbones. Unlike an external regulator design, the on-chip regulator reduces standby power and parts count.
تجویز کردہ
Automotive Body Controller (LIN Sub-Nets)
Body control modules that slave small LIN sub-nets - door modules, mirror adjusters, seat controllers - often route through a central node that holds the S912ZVHY64F1CLL. Its integrated LIN physical layer and DMA engine allow the MCU to manage multiple LIN schedules simultaneously without off-CPU scheduling load. The 64KB Flash stores diagnostics and node configuration, while the integrated CAN physical layer ties the node to the vehicle's main CAN-FD backbone. The 100-LQFP package supports the multi-bus routing on a single die.
تجویز کردہ
Small-Engine / Marine Instrument Panel
The S912ZVHY64F1CLL is well-suited to small-engine and marine outboard instrument panels where water exposure, vibration, and wide temperature swing drive demand for integrated, robust silicon. The -40 to +85 C industrial temperature grade matches marine conditions, while the integrated stepper-motor gauge drivers power RPM, oil, and fuel gauges directly without external H-bridges. The 32MHz S12Z core and 64KB Flash hold trim logic and diagnostic tables, and the LIN physical layer integrates with NMEA-2000 gateways for marine communication.
تجویز کردہ
Simple White-Goods Control Board
Although the S912ZVHY64F1CLL is automotive-qualified, its integrated CAN/LIN, gauge drivers, and display controller serve white-goods boards (washing machine, oven, dishwasher) that need an automotive-grade MCU for marketing differentiation. The single 5V supply operation lets the board run from a small internal supply, while the 100-LQFP and 32MHz S12Z core handle button debouncing, sensor fusion, and the front-panel UI. The 64KB Flash absorbs menu and fault log state machines, plus diagnostics uploadable over CAN/LIN.
تجویز کردہ
12V Battery-Powered Telematics / Asset Tracker
For 12V-battery-powered telematics and asset trackers, the S912ZVHY64F1CLL delivers integrated CAN/LIN for vehicle bus sniffing and stepper-driver output for local diagnostics, all on a single 5V supply derived from the battery. The 32MHz S12Z core executes periodic CAN/LIN scans while 64KB Flash stores trip data and OTA staging area, and 4KB SRAM handles the working buffer. Because the MCU is AEC-Q100 qualified, it is robust to 12V supply transients common in automotive battery systems without external protection circuitry.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا S912ZVHY64F1CLL — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | S912ZVHY128F1CLL | S912ZVHY32F1CLL | S912ZVHY64F1MLL | S912ZVHY64F1VLQ | MC9S12XEG384J3CALR |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 100-LQFP (14x14) | 100-LQFP (14x14) - same | 100-LQFP (14x14) - same | 100-LQFP (14x14) - same | 100-LQFP (14x14) - same | 100-LQFP - same |
| Core | S12Z 16-bit | S12Z 16-bit | S12Z 16-bit | S12Z 16-bit | S12Z 16-bit | S12X 16-bit |
| Maximum CPU Clock | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 50 MHz |
| Flash Program Memory | 64 KB | 128 KB (+100%) | 32 KB (-50%) | 64 KB (0%) | 64 KB (0%) | 384 KB (+500%) |
| RAM Size | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB | 24 KB (+500%) |
| Supply Voltage | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 3.13 V to 5.5 V |
| Integrated CAN/LIN Physical Layer | Yes (CAN + LIN) | Yes (CAN + LIN) | Yes (CAN + LIN) | Yes (CAN + LIN) | Yes (CAN + LIN) | Yes (CAN, SCI/SPI) |
| Integrated Stepper-Motor Gauge Drivers | Yes (8 half-bridge channels) | Yes (8 half-bridge channels) | Yes (8 half-bridge channels) | Yes (8 half-bridge channels) | Yes (8 half-bridge channels) | No (external H-bridges required) |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +125 C |
| AEC-Q100 Qualified | Yes (automotive cluster) | Yes | Yes | Yes | Yes | Yes |
اہم امتیازی خصوصیات
- Integrated CAN + LIN physical layers and stepper-motor gauge drivers in one 100-LQFP (بمقابلہMC9S12XEG384J3CALR)
- S12Z core with single 5V supply versus legacy S12X needs multiple rails (بمقابلہMC9S12XEG384J3CALR)
- S12ZVHY128F1CLL provides 128KB Flash in the identical footprint for headroom (بمقابلہS912ZVHY32F1CLL (32 KB variant))
- On-chip LCD controller eliminates external segment-driver ICs (بمقابلہDiscrete cluster MCU + external LCD driver)
ڈیزائن نوٹس
The S912ZVHY64F1CLL requires a single 5V supply on the VDD pins plus a decoupling network on the VDDR internal regulator output. According to NXP's S12ZVH family datasheet recommendation, place a 100nF and a 4.7uF capacitor close to the VDDR/VSS pair and bulk capacitance close to each VDD pin. Verified: power consumption scales with peripheral clock gating - disable unused CAN/LIN modules in software init to drop quiescent draw.
Estimated: at 32MHz CPU clock driving the integrated CAN, LIN, and LCD peripherals at 100% duty, the die may dissipate 200 to 400 mW. With the 100-LQFP (14x14) package's theta_JA roughly 50 to 60 C/W on a 4-layer JEDEC PCB, junction rise above ambient is typically 10 to 24 C, so at 85 C ambient the junction does not exceed NXP's 150 C limit. A bottom-side copper pour improves dissipation significantly.
Place the BDM (Background Debug Mode) pin and RESET pin with 0-ohm isolation options for factory programming access. The CANH/CANL pair should route as a 100-ohm differential pair within 5 mm of the package to keep the bus termination clean. LCD segment traces can be 0.1 mm width; gauge-driver traces should be 0.2 mm or wider because of the stepper-motor coil currents.
Do not stack interrupts at startup before CAN/LIN clocks are stable - the CAN physical layer can latch the bus in a dominant state if not correctly reset. Avoid floating the TEST pin; tie TEST to VDD with a 10k resistor. Always read the security bytes before initiating Flash erase to avoid accidental mass erase on production boards.
The stepper-motor gauge drivers drive at fixed PWM duty; verify the per-pin current limit against the chosen motor's coil resistance at minimum supply (4.5 V). Exceeding the per-pin rating causes long-term electromigration failure. For multi-motor designs, allocate at least one ground pin between high-current driver groups to minimize ground bounce.
تعمیل کی معلومات
RoHS, REACH, AEC-Q100 automotive-qualified per NXP S12ZVH family documentation. Lead-free (Pb-free) matte-tin finish on 100-LQFP package. Conflict-minerals compliant per NXP corporate statement.