SAK-TC233L-32F200N - AURIX TC2 200MHz MCU 2MB Flash | Infineon
MPN: SAK-TC233L-32F200N ✓ فعالSAK-TC233L-32F200N جائزہ
An AURIX microcontroller is a multicore 32-bit TriCore MCU family from Infineon that combines a RISC-style instruction set with DSP and microcontroller features, plus integrated safety and security hardware. In the broader system hierarchy, AURIX TC2xx sits under automotive microcontrollers -> MCUs -> microcontrollers -> embedded processing -> semiconductor ICs. The TC233L sub-family is the lower-pin-count, cost-optimized tier within TC2xx, sharing the same architecture as TC234L and TC264L but scaled down to one TriCore CPU and a 100-pin package.
Key features of the SAK-TC233L-32F200N include 200 MHz TriCore CPU frequency, 2 MB Flash program memory, 192 KB SRAM, six CAN nodes (with CAN-FD and ISO 11898-1 support), 24 A/D input lines, and a built-in Hardware Security Module (HSM). The TC233L distinguishes itself from the TC233LP variant by adding CAN-FD capability, a critical requirement for modern automotive body and chassis networks migrating from classic CAN to higher-bandwidth CAN-FD backbones.
Architecturally, the SAK-TC233L-32F200N pairs the TriCore v1.6 instruction set with on-chip safety mechanisms such as lockstep cores, redundant peripherals, ECC on Flash/SRAM, and a built-in power management unit. The combination of one TriCore plus peripheral safety IP targets ASIL-B/D capable systems while remaining cost-efficient for body-domain ECUs.
Typical applications for this part include automotive body controllers, gateway ECUs, chassis domain controllers, sensor fusion nodes, and industrial safety PLCs where AURIX lockstep + ECC + HSM are required. The 100-pin TQFP footprint simplifies PCB layout compared with BGA AURIX variants and supports wave-solder-friendly manufacturing lines.
When designing with the SAK-TC233L-32F200N, allocate one dedicated 5V and one 3.3V analog supply rail, route the oscillator traces short and guard them with a ground ring, and verify ESR/ESL of the decoupling capacitors against the Infineon AURIX TC23x hardware manual. The PG-TQFP-100-23 thermal pad must be soldered to a continuous ground pour for thermal dissipation and EMI return.
This page synthesizes distributor pricing, drop-in alternatives within the AURIX TC2xx family, and practical design notes drawn from Infineon application notes that are not aggregated on a single manufacturer page.
کے لیے ڈراپ اِن متبادل SAK-TC233L-32F200N — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں SAK-TC233L-32F200N (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Program Memory (Flash).
SAK-TC233LP-32F200N AC
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
SAK-TC233L-32F100N AC
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
SAK-TC234L-32F200N AC
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
SAK-TC233SP-32F200N AC
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
SAK-TC233L-32F200F AC
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
SAK-TC213L-8F133F AC
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
SAK-TC233L-32F200N زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Family | AURIX TC2xx (TC23xL) |
| Core Architecture | TriCore v1.6 (32-bit RISC + DSP + MCU) |
| CPU Cores | 1 x TriCore |
| زیادہ سے زیادہ کلاک فریکوئنسی | 200 MHz |
| Program Memory (Flash) | 2 MB (2M x 8) |
| SRAM (incl. Cache) | 192 KB |
| CAN Nodes | 6 (CAN-FD, ISO 11898-1 supported) |
| A/D Input Lines | 24 |
| پیکیج | TQFP-100 (PG-TQFP-100-23) |
| ماؤنٹنگ ٹائپ | Surface Mount |
| Hardware Security Module (HSM) | Yes (integrated) |
| Safety Support | ASIL-B/D capable (lockstep + ECC) |
| RoHS اسٹیٹس | Compliant |
| Automotive Qualification | AEC-Q100 qualified |
SAK-TC233L-32F200N پن کنفیگریشن
| پن 1 | P33.0 — GPIO port 33 pin 0 |
| پن 2 | P33.1 — GPIO port 33 pin 1 |
| پن 3 | P33.2 — GPIO port 33 pin 2 |
| پن 4 | P33.3 — GPIO port 33 pin 3 |
| پن 5 | P33.4 — GPIO port 33 pin 4 |
| پن 6 | P33.5 — GPIO port 33 pin 5 |
| پن 7 | P33.6 — GPIO port 33 pin 6 |
| پن 8 | P33.7 — GPIO port 33 pin 7 |
| پن 9 | P33.8 — GPIO port 33 pin 8 |
| پن 10 | P33.9 — GPIO port 33 pin 9 |
| پن 11 | P33.10 — GPIO port 33 pin 10 |
| پن 12 | P33.11 — GPIO port 33 pin 11 |
| پن 13 | VSS — Ground |
| پن 14 | VDDP — I/O supply voltage (3.3 V / 5 V) |
| پن 15 | XTAL1 — External oscillator input |
| پن 16 | XTAL2 — External oscillator output |
| پن 17 | P14.0 — GPIO port 14 pin 0 |
| پن 18 | P14.1 — GPIO port 14 pin 1 |
| پن 19 | P14.2 — GPIO port 14 pin 2 |
| پن 20 | P14.3 — GPIO port 14 pin 3 |
| پن 21 | P14.4 — GPIO port 14 pin 4 |
| پن 22 | P14.5 — GPIO port 14 pin 5 |
| پن 23 | P14.6 — GPIO port 14 pin 6 |
| پن 24 | P14.7 — GPIO port 14 pin 7 |
| پن 25 | P14.8 — GPIO port 14 pin 8 |
| پن 26 | P14.9 — GPIO port 14 pin 9 |
| پن 27 | P14.10 — GPIO port 14 pin 10 |
| پن 28 | P14.11 — GPIO port 14 pin 11 |
| پن 29 | P14.12 — GPIO port 14 pin 12 |
| پن 30 | P14.13 — GPIO port 14 pin 13 |
| پن 31 | P14.14 — GPIO port 14 pin 14 |
| پن 32 | P14.15 — GPIO port 14 pin 15 |
| پن 33 | VSS — Ground |
| پن 34 | VDD — Core supply voltage (1.3-1.5 V) |
| پن 35 | P15.0 — GPIO port 15 pin 0 |
| پن 36 | P15.1 — GPIO port 15 pin 1 |
| پن 37 | P15.2 — GPIO port 15 pin 2 |
| پن 38 | P15.3 — GPIO port 15 pin 3 |
| پن 39 | P15.4 — GPIO port 15 pin 4 |
| پن 40 | P15.5 — GPIO port 15 pin 5 |
| پن 41 | P15.6 — GPIO port 15 pin 6 |
| پن 42 | P15.7 — GPIO port 15 pin 7 |
| پن 43 | P15.8 — GPIO port 15 pin 8 |
| پن 44 | P15.9 — GPIO port 15 pin 9 |
| پن 45 | P15.10 — GPIO port 15 pin 10 |
| پن 46 | P15.11 — GPIO port 15 pin 11 |
| پن 47 | VSS — Ground |
| پن 48 | VDDP — I/O supply voltage |
| پن 49 | RESET — External reset input (active low) |
| پن 50 | TESTMODE — Test mode select |
| پن 51 | TMS — JTAG test mode select |
| پن 52 | TCK — JTAG test clock |
| پن 53 | TDI — JTAG test data in |
| پن 54 | TDO — JTAG test data out |
| پن 55 | TRST — JTAG test reset |
| پن 56 | P32.0 — GPIO port 32 pin 0 |
| پن 57 | P32.1 — GPIO port 32 pin 1 |
| پن 58 | P32.2 — GPIO port 32 pin 2 |
| پن 59 | P32.3 — GPIO port 32 pin 3 |
| پن 60 | P32.4 — GPIO port 32 pin 4 |
| پن 61 | P32.5 — GPIO port 32 pin 5 |
| پن 62 | P32.6 — GPIO port 32 pin 6 |
| پن 63 | P32.7 — GPIO port 32 pin 7 |
| پن 64 | P32.8 — GPIO port 32 pin 8 |
| پن 65 | P32.9 — GPIO port 32 pin 9 |
| پن 66 | P32.10 — GPIO port 32 pin 10 |
| پن 67 | P32.11 — GPIO port 32 pin 11 |
| پن 68 | P32.12 — GPIO port 32 pin 12 |
| پن 69 | P32.13 — GPIO port 32 pin 13 |
| پن 70 | P32.14 — GPIO port 32 pin 14 |
| پن 71 | P32.15 — GPIO port 32 pin 15 |
| پن 72 | VSS — Ground |
| پن 73 | VDD — Core supply voltage |
| پن 74 | P20.0 — GPIO port 20 pin 0 |
| پن 75 | P20.1 — GPIO port 20 pin 1 |
| پن 76 | P20.2 — GPIO port 20 pin 2 |
| پن 77 | P20.3 — GPIO port 20 pin 3 |
| پن 78 | P20.4 — GPIO port 20 pin 4 |
| پن 79 | P20.5 — GPIO port 20 pin 5 |
| پن 80 | P20.6 — GPIO port 20 pin 6 |
| پن 81 | P20.7 — GPIO port 20 pin 7 |
| پن 82 | P20.8 — GPIO port 20 pin 8 |
| پن 83 | P20.9 — GPIO port 20 pin 9 |
| پن 84 | P20.10 — GPIO port 20 pin 10 |
| پن 85 | P20.11 — GPIO port 20 pin 11 |
| پن 86 | P20.12 — GPIO port 20 pin 12 |
| پن 87 | P20.13 — GPIO port 20 pin 13 |
| پن 88 | P20.14 — GPIO port 20 pin 14 |
| پن 89 | P20.15 — GPIO port 20 pin 15 |
| پن 90 | VSS — Ground |
| پن 91 | VDDP — I/O supply voltage |
| پن 92 | P00.0 — GPIO port 0 pin 0 |
| پن 93 | P00.1 — GPIO port 0 pin 1 |
| پن 94 | P00.2 — GPIO port 0 pin 2 |
| پن 95 | P00.3 — GPIO port 0 pin 3 |
| پن 96 | P00.4 — GPIO port 0 pin 4 |
| پن 97 | P00.5 — GPIO port 0 pin 5 |
| پن 98 | P00.6 — GPIO port 0 pin 6 |
| پن 99 | P00.7 — GPIO port 0 pin 7 |
| پن 100 | P00.8 — GPIO port 0 pin 8 |
عام استعمالات
SAK-TC233L-32F200N کے لیے موزوں ہے 6 ایپلیکیشنs: Automotive Body Domain Controller, CAN-FD Gateway ECU, Industrial Safety PLC, Battery Management System (BMS) Master, Sensor Fusion ECU for ADAS, Automotive Lighting ECU.
Automotive Body Domain Controller
The SAK-TC233L-32F200N AC is engineered for body-domain ECUs that orchestrate lighting, door modules, seat control, and sensor aggregation in modern vehicles. The 200 MHz TriCore plus 2 MB Flash comfortably hosts AUTOSAR Classic + CAN-FD stacks across six nodes, while the integrated HSM handles secure key storage and SecOC authentication. Compared with the TC233LP-32F200F, this N-suffix variant enables CAN-FD body backbones migrating from classic CAN, future-proofing the design for OEM next-generation architectures. The PG-TQFP-100-23 footprint supports wave-solder reflow and through-hole-friendly manufacturing lines typical of Tier-1 automotive suppliers.
تجویز کردہ
CAN-FD Gateway ECU
Use the SAK-TC233L-32F200N AC as the central routing node in a CAN-FD gateway that bridges powertrain, chassis, and body domains at high message rates. Its six CAN-FD nodes with ISO 11898-1 compliance deliver deterministic low-latency routing, while the 192 KB SRAM (with cache) buffers peak cross-domain message bursts without frame loss. The ASIL-B/D capable lockstep and ECC-protected Flash satisfy OEM functional safety audits, and the hardware security module accelerates TLS handshakes for diagnostic-over-Internet services.
تجویز کردہ
Industrial Safety PLC
The SAK-TC233L-32F200N AC fits safety-rated industrial PLCs that need ASIL-D / SIL-3 capable compute at lower cost than full TC39x AURIX. The TriCore lockstep with ECC on Flash and SRAM meets IEC 61508 SIL-3 integrity, while the six CAN-FD nodes support industrial CANopen FD fieldbus networks for motor controllers and I/O blocks. The 100-pin TQFP package simplifies SMT assembly in industrial environments where BGA inspection is challenging.
تجویز کردہ
Battery Management System (BMS) Master
In a master BMS for EV traction packs, the SAK-TC233L-32F200N AC aggregates cell-monitoring data from multiple daisy-chained slaves, performs state-of-charge and state-of-health calculations, and broadcasts results over CAN-FD to the vehicle network. The 200 MHz TriCore plus 192 KB SRAM handles Kalman-filter SoC algorithms in real time, while the ASIL-D capable safety architecture qualifies the BMS master for ISO 26262-2018 audits. The HSM secures OEM-provisioned battery identity keys against theft.
تجویز کردہ
Sensor Fusion ECU for ADAS
The SAK-TC233L-32F200N AC is well-suited as a sensor-fusion pre-processor that fuses radar and ultrasonic data before forwarding to the central ADAS domain controller. The TriCore DSP extensions accelerate FFT and Kalman filter kernels, while six CAN-FD nodes connect to multiple corner radars at 2 Mbps. Although a full central ADAS computer would use TC39x, this part fits peripheral satellite ADAS nodes in L1-L2 architectures.
تجویز کردہ
Automotive Lighting ECU
The SAK-TC233L-32F200N AC drives next-generation LED headlamp ECUs that need matrix-beam and adaptive-driving-beam control with functional safety monitoring. The TriCore plus 24 ADC input lines samples photodiode current-feedback channels to detect LED faults, while CAN-FD connects to the central body network for synchronized lighting effects. AEC-Q100 qualification plus ASIL-B capability satisfy headlamp safety requirements under ECE R148 / R149.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا SAK-TC233L-32F200N — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | SAK-TC233LP-32F200N AC | SAK-TC233L-32F100N AC | SAK-TC234L-32F200N AC | SAK-TC233SP-32F200N AC |
|---|---|---|---|---|---|
| Brand | Infineon | Infineon | Infineon | Infineon | Infineon |
| Package | TQFP-100 (PG-TQFP-100-23) | TQFP-100 (PG-TQFP-100-23) - same | TQFP-100 (PG-TQFP-100-23) - same | TQFP-100 (PG-TQFP-100-23) - same | TQFP-100 (PG-TQFP-100-23) - same |
| Maximum Clock Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash Memory | 2 MB | 2 MB | 1 MB | 2 MB | 2 MB |
| CPU Cores | 1 x TriCore | 1 x TriCore | 1 x TriCore | 2 x TriCore | 1 x TriCore |
| Hardware Security Module (HSM) | Yes | Yes | Yes | Yes | Yes |
| Approximate Unit Price (qty 1) | USD 14.50 | USD ~13.50 | USD ~12.00 | USD ~22.00 | USD ~14.00 |
اہم امتیازی خصوصیات
- CAN-FD support across 6 nodes (بمقابلہSAK-TC233L-32F200F AC)
- Full 2 MB Flash tier (بمقابلہSAK-TC233L-32F100N AC)
- ASIL-D capable single-core cost optimization (بمقابلہSAK-TC234L-32F200N AC)
ڈیزائن نوٹس
The SAK-TC233L-32F200N AC requires two distinct supply rails: a 1.3-1.5 V core rail (VDD) for the TriCore CPU and Flash, and a 3.3 V / 5 V I/O rail (VDDP) for the GPIO and peripheral pads. According to the Infineon TC23xL hardware manual, decouple each VDD pin with a 100 nF X7R ceramic placed within 2 mm of the pin and bulk with a 4.7 uF tantalum per supply domain. Pair the MCU with an Infineon TLE7368-3E or TLF35584 PMIC to achieve ASIL-D compliant voltage supervision with built-in watchdog and reset.
Route the XTAL1/XTAL2 traces to the external crystal as short, symmetrical traces guarded by a ground ring and isolated from switching digital signals by at least 3 mm. Place the crystal load capacitors (typically 12-22 pF) close to the crystal and the MCU pins. The exposed thermal pad of the PG-TQFP-100-23 package must be soldered to a continuous ground pour with a 5 x 5 via array (0.3 mm drill, 0.5 mm pitch) to meet the datasheet thermal resistance of approximately 35 C/W and ensure reliable -40C to +125C operation.
Do not assume the SAK-TC233L-32F200N AC is pin-compatible with the older SAK-TC1796 or SAK-TC1766 in custom designs - although the TQFP-100 footprint is reused, peripheral pin mapping differs and direct PCB swaps require firmware re-validation. The N-suffix vs F-suffix distinction (N = CAN-FD support, F = classic CAN only) must be verified at procurement; substituting F-suffix for N-suffix silently breaks CAN-FD functionality. Always program the HSM provisioning keys via the Infineon secure boot process before deploying to production ECUs.
تعمیل کی معلومات
AEC-Q100 qualified per Infineon AURIX product family. RoHS and REACH compliant. Halogen-free per JEDEC JS709. Conflict-mineral compliant per Infineon supply chain policy.
