STM32F072C8U6 - 48MHz Cortex-M0 MCU with USB/CAN | ST
MPN: STM32F072C8U6 ✓ فعالSTM32F072C8U6 جائزہ
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one control platform. The STM32F0 family belongs to the ARM Cortex-M microcontroller hierarchy, combining real-time embedded processing with peripherals for communications, timing, analog measurement, and digital control. STM32F072C8U6 is positioned for USB and CAN-connected equipment rather than high-performance computing.
Key features include a 48 MHz maximum core frequency, 64 KB Flash memory, 16 KB SRAM, USB connectivity, CAN connectivity, and a 48-pin UFQFPN package. The 3.3 V supply notation in distributor records identifies the intended operating rail for this device. Its integrated communications peripherals can reduce external interface-component count in USB peripheral, CAN network, and industrial-control products.
The STM32F072x8/xB architecture uses the high-performance ARM Cortex-M0 32-bit RISC core, as identified by STMicroelectronics in the product-page result. The MCU family is intended for embedded applications requiring moderate processing speed, communications, and low-power operation. USB and CAN support can simplify firmware-driven connectivity, although peripheral configuration and clocking must be validated against the complete manufacturer datasheet.
Typical applications include USB-to-serial adapters, CAN-connected sensors, industrial control modules, USB peripheral equipment, and compact consumer electronics. The UFQFPN package supports dense PCB layouts, while the exposed-pad construction requires careful thermal-via and copper layout according to the manufacturer’s land pattern.
When designing a board, confirm the exact pin assignments, alternate functions, power requirements, decoupling strategy, and exposed-pad connection from the official datasheet. Do not substitute a mechanically similar MCU solely by package name; verify USB, CAN, peripheral mapping, firmware startup, and memory compatibility.
This page combines verified manufacturer and distributor information with compatibility-focused alternative analysis, application guidance, comparison parameters, and practical PCB considerations to support faster engineering evaluation and sourcing.
کے لیے ڈراپ اِن متبادل STM32F072C8U6 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں STM32F072C8U6 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Flash Memory, Package, Core, Product Type, Architecture.
STM32F072C8T6
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →HK32F072C8U6
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
STM32F072C8U6 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | 32-bit ARM Cortex-M0 microcontroller |
| Maximum Core Frequency | 48 MHz |
| Flash Memory | 64 KB (64K x 8) |
| SRAM | 16 KB |
| Processor Core | ARM Cortex-M0 |
| Architecture | 32-bit RISC |
| USB Support | USB |
| CAN Support | CAN |
| سپلائی وولٹیج | 3.3 V |
| پیکیج | 48-UFQFPN (7 x 7 mm) |
| ماؤنٹنگ ٹائپ | Surface Mount |
| Exposed Pad | Yes, indicated by 48-UFQFN package description |
| Product Series | STM32F0 Series |
| Series Positioning | Mainstream USB and CAN MCU line |
| پن کی تعداد | 48 pins |
| Operating Frequency | Up to 48 MHz |
STM32F072C8U6 48-ufqfpn (7 x 7 mm) پن کنفیگریشن گائیڈ
STM32F072C8U6 (48-ufqfpn (7 x 7 mm) پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں STM32F072C8U6.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
STM32F072C8U6 کے لیے موزوں ہے 6 ایپلیکیشنs: USB Peripheral Controller, CAN-Connected Sensor Node, Industrial Control Module, USB-to-Serial Communication Adapter, Low-Power Embedded Controller, Compact Consumer Electronics.
USB Peripheral Controller
The STM32F072C8U6 fits USB peripheral-control products because the verified device description identifies USB connectivity, a 48 MHz ARM Cortex-M0 core, 64 KB Flash, and 16 KB SRAM. It can manage device enumeration, control transfers, status reporting, and application-specific USB functions in a compact embedded design. The MCU reduces the need for a separate USB interface IC, although the final design still requires connector protection, correct data-line routing, firmware implementation, and validation of the USB electrical requirements. Check the exact USB peripheral list, pin multiplexing, and current datasheet before assigning signals.
تجویز کردہ
CAN-Connected Sensor Node
The STM32F072C8U6 is a reasonable candidate for CAN-connected sensing because the verified specifications identify CAN support alongside a 48 MHz Cortex-M0 core and 64 KB Flash. The MCU can run acquisition logic, filtering, diagnostics, and communication firmware while occupying a compact 48-UFQFPN footprint. A CAN transceiver remains necessary between the MCU and the physical bus, and the design must account for termination, isolation, bus protection, and firmware timing. The provided data does not specify the exact CAN variant or transceiver pin mapping, so those details must be confirmed in the manufacturer documentation.
تجویز کردہ
Industrial Control Module
The STM32F072C8U6 supports compact industrial-control modules where 48 MHz processing, 64 KB Flash, and 16 KB SRAM are sufficient for real-time control and communication. Its USB and CAN interfaces can provide local configuration, diagnostics, and network connectivity without requiring a larger application processor. The 48-UFQFPN package supports dense boards, but the exposed pad must be connected to the required thermal and ground structure. Industrial suitability also depends on temperature, EMC, isolation, watchdog behavior, and environmental qualification, none of which are fully stated in the supplied data.
تجویز کردہ
USB-to-Serial Communication Adapter
The STM32F072C8U6 can be evaluated for USB communication adapters because the verified data identifies USB connectivity and a 48 MHz Cortex-M0 core. The MCU can implement USB device behavior and serial protocol conversion while using its 64 KB Flash for firmware and 16 KB SRAM for protocol buffers. A USB connector, protection network, and correctly designed power supply are still required. For production, confirm whether the selected USB device peripheral, bootloader strategy, and supported baud rates meet the product requirements; the supplied data does not provide those implementation details.
تجویز کردہ
Low-Power Embedded Controller
The STM32F072C8U6 may fit low-power embedded-control roles where a 48 MHz Cortex-M0 core is useful during active processing but low-power behavior is required between tasks. The supplied data does not provide sleep currents, wakeup sources, or clock configurations, so those values must be verified in the current datasheet before making a battery-life claim. Firmware should use the manufacturer’s clock, peripheral, and low-power procedures, and the PCB should preserve the required decoupling and exposed-pad layout. This application is appropriate for evaluation only until detailed electrical and power specifications are confirmed.
تجویز کردہ
Compact Consumer Electronics
The STM32F072C8U6 is suitable for compact consumer products requiring USB connectivity, moderate real-time processing, and modest embedded memory. Its 48-UFQFPN package can help reduce board area while preserving access to communications peripherals and general-purpose I/O. The design should account for ESD protection, USB routing, firmware update strategy, thermal performance, and user-interface timing. The verified source does not specify the exact peripheral mix or environmental ratings, so final suitability should be established by comparing the complete product requirements with the manufacturer datasheet.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا STM32F072C8U6 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | STM32F072C8T6 | HK32F072C8U6 |
|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | HK32 |
| Package | 48-UFQFPN (7 x 7 mm) | 48-UFQFPN (7 x 7 mm) - verify ordering variant | 48-UFQFPN (7 x 7 mm) - claimed same pinout |
| Compatibility Qualification | Original STMicroelectronics device | Related same-brand ordering variant; verify exact differences | Claimed hardware and software compatibility; verify ADC, clock, and low-power differences |
اہم امتیازی خصوصیات
- Original STMicroelectronics device identity with integrated USB and CAN positioning (بمقابلہHK32F072C8U6)
- Established STM32F0 product-family documentation (بمقابلہHK32F072C8U6)
- Same-brand ordering option may simplify qualification planning (بمقابلہSTM32F072C8T6)
ڈیزائن نوٹس
Treat the 48-UFQFPN exposed pad as a mandatory layout feature rather than an optional thermal area. Follow the manufacturer land pattern, place the required power and ground connections, and use multiple thermal vias only where the package guidance permits them. Confirm the exact pad geometry and pin numbering from the official package drawing before fabrication.
Route USB differential signals as a controlled, impedance-aware pair on the shortest practical path, with the connector, protection components, and MCU pins placed to minimize return-path discontinuity. Keep switching or high-current traces away from the pair and provide a continuous ground reference. Exact impedance and spacing values are [DATA_NEEDED: USB layout requirements from the manufacturer].
Build the power tree around the device’s 3.3 V supply requirement and validate every rail against the current datasheet, including startup, decoupling, and exposed-pad connection requirements. Do not infer absolute voltage limits from the distributor summary. Estimate regulator dissipation only after the actual input and output voltages are known; use the manufacturer’s recommended capacitor values where available.
Avoid treating a same-package MCU as automatically interchangeable. Verify peripheral mapping, USB and CAN electrical behavior, clock-tree configuration, bootloader assumptions, firmware startup, memory map, temperature limits, and exposed-pad requirements. HK32F072C8U6 is explicitly reported to require review of ADC, clock, and low-power differences, so validate it at board and firmware level before production release.
تعمیل کی معلومات
The supplied verified data does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. No compliance claim is inferred from the package or manufacturer.