STMicroelectronics

STM32G474MEY6TR - 170MHz Cortex-M4F 512KB MCU | STMicroelectronics

MPN: STM32G474MEY6TR ✓ فعال
1.8 V / 2.5 V / 3.3 V Vdss 81-ball WLCSP Package 170 MHz Speed 512 KB Memory
MOQ: 1 |

STM32G474MEY6TR جائزہ

The STMicroelectronics STM32G474MEY6TR is a 32-bit Arm Cortex-M4F microcontroller operating at up to 170 MHz, with 512 KB of Flash memory, 128 KB of SRAM, and an 81-ball WLCSP package measuring approximately 4.02 mm by 4.27 mm. It belongs to the STM32G4 performance microcontroller family, combining a high-frequency Cortex-M4F core with a 12-bit ADC, math accelerator, advanced timers, and mixed-signal connectivity in a compact package.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. In the hierarchy of embedded electronics, the STM32G474MEY6TR is an Arm Cortex-M4F microcontroller, an embedded processing IC, and a member of the STM32G4 family. The F designation identifies the floating-point unit, while the 170 MHz operating frequency supports responsive control, real-time signal processing, and communications handling.

Key features include 512 KB of Flash for firmware and constants, 128 KB of SRAM for working data, a 170 MHz Cortex-M4F core, 12-bit ADC capability, and math-acceleration hardware. The 81-WLCSP format supports high-density designs without requiring a large leaded package. The STM32G4 family is especially useful where analog measurement, motor control, digital power conversion, and communication peripherals must coexist in one microcontroller.

The STM32G474MEY6TR combines general-purpose control with analog and timing resources. Its high-frequency Cortex-M4F core can execute control loops and communication protocols while dedicated peripherals handle conversions, pulse-width modulation, timers, and signal generation. This architecture helps reduce external component count in compact industrial, consumer, and communications equipment.

Typical applications include digital power supplies, motor-control systems, industrial sensor nodes, battery-powered equipment, and compact audio or communication products. The 81-ball WLCSP footprint is useful where board area is constrained, although fine-pitch assembly and adequate thermal design require careful PCB layout.

Designers should follow the STMicroelectronics pin-definition table when assigning balls and routing sensitive analog signals. Decoupling capacitors should be placed directly beside the appropriate supply balls, analog and digital grounds should be managed according to the reference design, and high-current or switching nodes should be kept away from precision measurement inputs. Confirm package ball assignments against the manufacturer datasheet before fabrication.

This product page combines the STM32G474MEY6TR specifications, application guidance, sourcing workflow, and compatibility considerations into a concise engineering reference for compact embedded designs.

کے لیے ڈراپ اِن متبادل STM32G474MEY6TR — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں STM32G474MEY6TR (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Architecture, Core, Flash Memory, Math Accelerator, Package.

STMicroelectronics
Architecture: 32-bit RISC
Core: Arm Cortex-M4
Flash Memory: 512 KB (512K x 8)
موازنہ کریں STM32G474MEY6TR →

اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔

متبادل کی درخواست کریں

STM32G474MEY6TR زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type 32-bit Arm Cortex-M4F microcontroller
Core Arm Cortex-M4F
Maximum CPU Frequency 170 MHz
Flash Memory 512 KB
Flash Organization 512K x 8 bits
SRAM 128 KB
Instruction Set 32-bit RISC with floating-point unit
ADC Resolution 12-bit
Math Accelerator Present
پیکیج 81-ball WLCSP
Package Dimensions 4.02 mm x 4.27 mm
Architecture Arm Cortex-M4 32-bit RISC
Core Performance 170 MHz / 213 DMIPS
Ordering Package Tape and reel
Product Family STM32G4
Device Series STM32G474xB/xC/xE
I/O Supply Voltage 1.8 V / 2.5 V / 3.3 V

STM32G474MEY6TR tape and reel پن کنفیگریشن گائیڈ

STM32G474MEY6TR (tape and reel پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

STM32G474MEY6TR کے لیے tape and reel پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں STM32G474MEY6TR.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

STM32G474MEY6TR کے لیے موزوں ہے 6 ایپلیکیشنs: Digital Power Converters, Industrial Motor Control, Precision Sensor Acquisition, Battery-Powered Portable Equipment, Communication Gateways, Compact Audio and Signal Processing.

⚡

Digital Power Converters

The STM32G474MEY6TR fits digital power converters because its 170 MHz Cortex-M4F core can execute compensation and control algorithms while the 12-bit ADC measures feedback voltage and current. Math-acceleration hardware supports the intensive arithmetic required by digital control, and advanced timers can generate PWM drive signals. Placing the MCU beside the analog feedback network can shorten control paths and reduce board area. The main engineering tradeoff is the fine-pitch 81-ball WLCSP, which requires careful decoupling, controlled analog routing, and assembly capability suited to compact power modules.

🏭

Industrial Motor Control

The STM32G474MEY6TR is appropriate for compact industrial motor controllers requiring fast computation and accurate analog measurements. Its 170 MHz Cortex-M4F core can process current, position, and speed-control loops, while the 12-bit ADC supports phase-current sensing and the math accelerator assists transform and control calculations. Advanced timer resources suit deterministic PWM generation. Because the device is only approximately 4.02 mm by 4.27 mm, designers must keep switching-node noise away from ADC inputs and provide a carefully controlled power and ground layout.

🧩

Precision Sensor Acquisition

The STM32G474MEY6TR supports precision sensor-acquisition systems that combine sampling, filtering, and control in one package. The 12-bit ADC can capture analog sensor inputs, the 170 MHz core can process the resulting data, and 128 KB of SRAM provides working space for buffers and algorithms. Its compact 81-ball WLCSP is valuable in distributed industrial and building-automation nodes where board area is limited. Signal integrity remains the central tradeoff: analog input routing, reference placement, and ground topology should follow the manufacturer layout to minimize conversion error.

📱

Battery-Powered Portable Equipment

The STM32G474MEY6TR suits battery-powered portable equipment that needs responsive control in a limited board area. The 512 KB of Flash accommodates firmware and lookup data, while the 128 KB of SRAM supports protocol buffers and application state. The Cortex-M4F core handles control and communications efficiently at up to 170 MHz, and the small WLCSP preserves space for the power system, sensor, and radio. Power consumption, sleep behavior, and battery regulation should be evaluated against the complete operating profile rather than inferred from processor frequency alone.

🌐

Communication Gateways

The STM32G474MEY6TR can serve as the control processor in a compact communication gateway that must manage real-time protocol traffic alongside peripheral functions. Its 170 MHz Cortex-M4F core and 128 KB of SRAM provide capacity for networking tasks and data handling, while the STM32G4 peripheral set supports timing and mixed-signal control functions. The compact WLCSP allows the gateway to be integrated into dense modules without sacrificing significant board area. Firmware partitioning and interrupt priority planning are important when the MCU also supervises analog measurements.

🎧

Compact Audio and Signal Processing

The STM32G474MEY6TR is suitable for compact audio and general signal-processing modules that require real-time control, fast arithmetic, and analog measurement. Its floating-point Cortex-M4F core supports efficient execution of filtering and control routines, the math accelerator improves arithmetic throughput, and the 12-bit ADC provides an acquisition path. The 81-ball WLCSP helps limit product size, while the 512 KB of Flash provides room for substantial application firmware. Critical analog and clock traces should be isolated from high-speed switching paths to preserve signal quality.

What are the key specifications of STM32G474MEY6TR that engineers should know?
The STM32G474MEY6TR is a 170 MHz, 32-bit Arm Cortex-M4F microcontroller with 512 KB of Flash, 128 KB of SRAM, and a 12-bit ADC in an 81-ball WLCSP package. The STMicroelectronics product page identifies the device as part of the STM32G474xB/xC/xE series, while the distributor listing identifies the package as approximately 4.02 mm by 4.27 mm. Math-acceleration hardware and advanced timer resources make the device suitable for compact control, measurement, and power-conversion systems.
What is the operating frequency of STM32G474MEY6TR?
The STM32G474MEY6TR operates at up to 170 MHz. According to the STMicroelectronics STM32G474ME product page, the device is based on the high-performance Arm Cortex-M4 32-bit RISC core. This operating rate supports responsive real-time control, communications protocol handling, and control-loop execution while dedicated peripherals manage analog conversion and timing functions.
How much Flash and SRAM does STM32G474MEY6TR have?
The STM32G474MEY6TR provides 512 KB of Flash memory and 128 KB of SRAM. The 512 KB Flash capacity is identified in the manufacturer-linked distributor specifications and is organized as 512K by 8 bits, while the SRAM figure appears in the STM32G474MEY6TR datasheet listing. These memories support firmware, constants, working buffers, and communication or control data within a single embedded device.
What package does STM32G474MEY6TR use?
The STM32G474MEY6TR uses an 81-ball WLCSP package measuring approximately 4.02 mm by 4.27 mm. This compact surface-mount format is identified in the DigiKey and Arrow product listings. Its fine-pitch ball array saves board area but demands careful escape routing, inspection, and assembly planning, with all connections assigned from the manufacturer pin-definition table.
Where can I download the STM32G474MEY6TR datasheet PDF?
The STM32G474MEY6TR datasheet can be downloaded from the official STMicroelectronics product page for the STM32G474ME device. The manufacturer page describes the STM32G474xB/xC/xE series and links to technical documentation. The searchable STM32G474MEY6TR datasheet listing is also available through Digi-Electronics. Use the manufacturer document for final pin, electrical, timing, and package information.
Where can I find the STM32G474MEY6TR pinout?
The STM32G474MEY6TR pinout is found in the STM32G474xB/xC/xE datasheet pin-definition and package sections. Because this is an 81-ball WLCSP rather than a conventional leaded package, every ball must be assigned from the manufacturer table, including power, ground, analog, debug, and communication functions. Do not infer ball locations from the mechanical drawing alone.
Is STM32G474MEY6TR suitable for motor control applications?
The STM32G474MEY6TR is suitable for compact motor-control designs that require fast control-loop execution and integrated analog measurement. Its 170 MHz Cortex-M4F core, 12-bit ADC, math accelerator, and advanced timer resources support current sensing, speed measurement, and PWM generation. The 81-ball WLCSP also helps reduce board size, although layout must preserve analog signal quality and keep switching-node interference away from sensitive inputs.
Can STM32G474MEY6TR be used in a digital power supply?
The STM32G474MEY6TR can support digital power-supply control because it combines a 170 MHz control processor, 12-bit ADC, math accelerator, and advanced timer resources in one compact package. These resources can support feedback-loop computation, PWM generation, and current or voltage monitoring. Board design should isolate high-current switching paths from analog inputs and follow the manufacturer reference layout for decoupling.
What can replace STM32G474MEY6TR?
A true drop-in replacement for the STM32G474MEY6TR should use the same 81-ball WLCSP footprint and provide pin-to-pin compatible power, ground, analog, debug, and peripheral connections. The available cross-reference results do not identify a verified drop-in substitute, so no replacement should be selected solely from a similar core frequency or memory size. Confirm the candidate against the manufacturer pin table and validate peripheral mapping, clock configuration, firmware support, and package dimensions.
Is STM32G474MEY6TR the same as STM32G474PEI6TR?
No. The STM32G474PEI6TR is listed in a 176+25 UFBGA package measuring 10 mm by 10 mm, whereas the STM32G474MEY6TR is an 81-ball WLCSP measuring approximately 4.02 mm by 4.27 mm. Although both are STM32G474-family 170 MHz devices with 512 KB of Flash, their packages and ball assignments differ, so they are not PCB drop-in equivalents.
When should I choose STM32G474MEY6TR over a larger STM32G474 package?
Choose the STM32G474MEY6TR when board area is a primary constraint and the design can accommodate 81-ball WLCSP assembly. The device retains a 170 MHz Cortex-M4F core, 512 KB of Flash, 128 KB of SRAM, 12-bit conversion, and math acceleration. Select a larger BGA package instead when fine-pitch assembly capability, routing access, or mechanical inspection is limited.
What is the best STM32G474MEY6TR equivalent for industrial control?
The best equivalent is an STM32G474ME-family device only if it has the same 81-ball WLCSP footprint, compatible power and I/O assignments, and equivalent required peripherals. The available cross-reference results do not provide a verified drop-in part, so no cross-brand MCU is established as a direct replacement. For industrial control, select the target when its documented temperature range and qualification satisfy the environmental requirements.
STM32G474MEY6TR vs STM32G474PEI6TR: which is better for a compact PCB?
The STM32G474MEY6TR is better for a compact PCB because its 81-ball WLCSP is approximately 4.02 mm by 4.27 mm, while the STM32G474PEI6TR uses a 176+25 UFBGA measuring 10 mm by 10 mm. Both provide 170 MHz Cortex-M4 performance and 512 KB of Flash, but their footprints are not interchangeable. The choice therefore depends primarily on board area, assembly capability, and routing.
How do I design the PCB around STM32G474MEY6TR?
Place the required input and bulk-decoupling capacitors close to their corresponding power balls, and use the shortest practical ground returns for analog and digital circuitry. Keep switching nodes and high-current traces away from ADC inputs, route sensitive analog signals over quiet ground planes, and follow the manufacturer reference layout. The fine-pitch 81-ball WLCSP also requires appropriate escape routing, solder-mask design, and assembly inspection.
Where to buy STM32G474MEY6TR online and what is the lead time?
Use the Request a Quote form on this page to ask for STM32G474MEY6TR availability, lead time, and minimum order quantity. The manufacturer lists the STM32G474ME device as an active product family, but current stock and delivery timing can change by region and order quantity. The part is ordered in tape-and-reel format according to the ordering code.

کے لیے انجینئرنگ ریفرنس ڈیٹا STM32G474MEY6TR — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the STM32G474MEY6TR when a compact 81-ball WLCSP design needs the combination of a 170 MHz Arm Cortex-M4F core, 512 KB of Flash, 128 KB of SRAM, 12-bit analog conversion, math acceleration, and advanced timers. It is especially useful for digital power converters, motor-control systems, sensor nodes, and communication modules where board area is constrained. Choose a larger STM32G474 package instead when fine-pitch assembly, routing escape, inspection, or regional production capability makes the WLCSP impractical. The STM32G474PEI6TR provides comparable 170 MHz and 512 KB Flash performance in a 176+25 UFBGA, but it is not a drop-in substitute because the package and ball assignments differ. No verified pin-compatible replacement was identified, so a second source should not be selected using core frequency and memory capacity alone.

ڈیزائن نوٹس

The 81-ball WLCSP requires deliberate escape routing between the fine-pitch component and the rest of the board. Follow the manufacturer footprint and land-pattern recommendations exactly, maintain symmetric escape paths where practical, and avoid placing vias beneath the device unless the package design expressly permits them. Inspect assembled joints because hidden solder issues can be difficult to detect in a dense ball-array package.

Place the required decoupling capacitors immediately beside the corresponding power balls and connect their ground returns through the shortest low-impedance path. Separate sensitive analog supply routing from noisy digital and switching paths where the reference layout allows it. Check every power pin and decoupling requirement against the STM32G474xB/xC/xE pin-definition table before releasing the PCB layout.

Keep ADC inputs and their reference network away from PWM outputs, switching-node copper, and high-current return paths. Use a continuous ground reference beneath sensitive routes, minimize vias in analog networks, and place analog filtering close to the source when possible. The 12-bit converter can benefit from careful layout even though its resolution does not remove errors caused by switching noise or reference instability.

Do not treat a shared STM32G474 family number as proof of pin compatibility. The 81-ball WLCSP, 176+25 UFBGA, and other packages have different ball counts, dimensions, power arrangements, and routed functions. A valid replacement must match the physical footprint and every connected ball, then be checked for peripheral, clock, firmware, and environmental differences before production use.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

Compliance fields are unknown because no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified for this exact ordering code.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-14 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

STM32G474MEY6TR datasheet STM32G474MEY6TR pinout STM32G474MEY6TR datasheet pdf STM32G474MEY6TR equivalent STM32G474MEY6TR replacement STM32G474MEY6TR cross reference STM32G474MEY6TR vs STM32G474PEI6TR STM32G474MEY6TR footprint STM32G474MEY6TR application circuit STM32G474MEY6TR price STM32G474MEY6TR stock STMicroelectronics STM32G474MEY6TR

متعلقہ اجزاء اور اصطلاحات

STMicroelectronics STM32G474MEY6TR STM32G474ME STM32G4 Arm Cortex-M4F Arm Cortex-M4 32-bit RISC processor microcontroller embedded processing IC semiconductor 512 KB Flash memory 128 KB SRAM 12-bit ADC math accelerator high-resolution timer 81-ball WLCSP WLCSP package family surface-mount package digital power conversion motor control sensor acquisition industrial automation communication gateway battery-powered device
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں