Microchip Technology

SY88703VKC - 622Mbps PECL Limiting Amplifier | Microchip

MPN: SY88703VKC ✓ فعال
+3.3 V to +5 V Vdss 10-pin MSOP Package
MOQ: 1 |

SY88703VKC جائزہ

The Microchip Technology SY88703VKC is a low-power limiting postamplifier designed for fiber-optic receivers, operating from a single +3.3V to +5V supply and supporting data rates up to 622Mbps. The device is packaged in a 10-pin MSOP and converts noisy or variable-amplitude linear signals from a transimpedance amplifier into differential PECL-level waveforms. It also includes a TTL-compatible loss-of-signal output.

A limiting postamplifier is a specialized amplifier used between a photodiode receiver’s transimpedance amplifier and a high-speed logic or clock-recovery circuit. Its primary function is signal conditioning: it restores usable logic amplitude, limits excess noise, and produces the differential signaling format expected by PECL input stages. The SY88703VKC therefore belongs to the broader hierarchy of fiber-optic receiver components, optical-network amplifiers, high-speed interface ICs, and semiconductor signal-conditioning devices.

The key operating characteristics are a maximum stated data rate of 622Mbps, operation from a single 3.3V or 5V supply, PECL output signaling, TTL loss-of-signal indication, and a compact 10-MSOP package. These features suit legacy SONET, SDH, ATM, and other optical-transport interfaces where a transimpedance amplifier produces an analog waveform that must be converted into a clean differential digital signal. The single-supply architecture also reduces the number of rails required around the receiver signal chain.

Unlike a general-purpose voltage amplifier, the SY88703VKC is optimized around a narrow high-speed signal path and limiting function. Its inputs are intended to work with the output of a typical transimpedance amplifier. The resulting PECL outputs can feed decision circuitry, clock-recovery logic, or other ECL/PECL-compatible stages. Because signal integrity and timing margin depend strongly on trace impedance, component placement, supply return paths, and the selected optical front end, the device should be evaluated as part of the complete receiver channel rather than as an isolated amplifier.

Typical applications include 155Mbps and 622Mbps optical receivers, SONET and SDH transceiver modules, ATM and packet-over-fiber equipment, PON receiver front ends, clock-recovery circuits, and industrial optical-link assemblies. In these systems, the limiting amplifier can improve the usable amplitude presented to downstream digital circuitry while the TTL loss-of-signal output provides a separate system-health indication.

Layout is a central design consideration because the MSOP package provides limited space for high-speed routing. Keep the TIA-to-limiting-amplifier and amplifier-to-PECL paths short, use controlled-impedance routing where the link specification requires it, and provide a low-impedance return path for both supply rails. Review input termination, output reference connections, and unused-pin treatment in the manufacturer datasheet before releasing the PCB layout. Probe the complete channel with the intended optical or electrical source because ringing, threshold shifts, and loss-of-signal timing may only become visible under realistic loading.

This page combines the manufacturer’s device description, package and signaling details, source links, engineering guidance, and explicit data gaps for a practical procurement and design reference. It focuses on the SY88703VKC function, receiver integration constraints, and the information needed to determine whether a qualified drop-in alternative is genuinely available.

کے لیے ڈراپ اِن متبادل SY88703VKC — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔

متبادل کی درخواست کریں

SY88703VKC زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type Limiting postamplifier
Application Fiber-optic receiver signal conditioning
Maximum Data Rate 622 Mbps
Supply Voltage Range +3.3 V to +5 V
Supply Configuration Single supply
Output Signal Type Differential PECL
Loss-of-Signal Output TTL
Compatible Front-End Typical transimpedance amplifier output
پیکیج 10-pin MSOP
ماؤنٹنگ ٹائپ Surface mount
Power Classification Low-power amplifier
Signal Conditioning Amplitude limiting and PECL quantization

SY88703VKC 10-pin msop پن کنفیگریشن گائیڈ

SY88703VKC (10-pin msop پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

SY88703VKC کے لیے 10-pin msop پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں SY88703VKC.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

SY88703VKC کے لیے موزوں ہے 6 ایپلیکیشنs: 622Mbps SONET Optical Receiver, SDH Optical Interface Module, ATM Optical Receiver Front End, Packet-Over-Fiber Receiver, PON Optical Receiver Module, Clock-Recovery Signal Front End.

🌐

622Mbps SONET Optical Receiver

The SY88703VKC fits a 622Mbps SONET receiver path because it is specified for operation up to 622Mbps and converts the analog output of a transimpedance amplifier into differential PECL signals. It is placed after the TIA and before clock-recovery or decision circuitry, where clean logic levels are required. The single 3.3V or 5V supply simplifies rail planning, while the TTL loss-of-signal output can support receiver supervision. Timing margin still depends on TIA response, PCB propagation delay, and correct PECL termination.

🌐

SDH Optical Interface Module

The SY88703VKC is appropriate for an SDH optical interface module that accepts a transimpedance-amplifier waveform and requires differential PECL-level outputs. Its stated 622Mbps capability covers the targeted legacy transport class, and the 10-MSOP package supports compact module layouts. The limiting stage reduces the impact of amplitude variation before downstream digital circuitry. Designers should preserve short high-speed routing, provide a continuous return path, and follow the datasheet’s reference and decoupling requirements.

📡

ATM Optical Receiver Front End

The SY88703VKC can condition the TIA output in an ATM optical receiver front end, turning a noisy analog signal into differential PECL waveforms suitable for digital recovery stages. Its low-power, single-supply operation is useful when the optical module has limited board area and power budget. The amplifier must be evaluated together with the photodiode, TIA, clock recovery, and channel losses because nominal 622Mbps operation does not by itself guarantee end-to-end eye closure. The TTL loss-of-signal indication adds useful supervision.

🖥️

Packet-Over-Fiber Receiver

The SY88703VKC is applicable in packet-over-fiber receiver assemblies that use a TIA followed by high-speed limiting and clock recovery. Differential PECL outputs provide the interface expected by compatible ECL/PECL logic, while operation from a single 3.3V or 5V rail simplifies the optical module’s power architecture. Layout must minimize loop area and discontinuities between the TIA, amplifier, and termination network. Loss-of-signal timing should also be checked against the packet-layer system alarm requirements.

🧩

PON Optical Receiver Module

The SY88703VKC can serve as the limiting stage in a PON-oriented optical receiver module when the required line rate and logic interface fall within its 622Mbps capability. It accepts the output of a typical TIA and produces differential PECL-level signals for downstream detection. The TTL loss-of-signal output can assist module health monitoring. Designers should verify burst-mode behavior, input sensitivity, recovery time, and reference-voltage requirements against the complete PON system specification before production use.

⏱️

Clock-Recovery Signal Front End

The SY88703VKC is suitable ahead of clock-recovery circuitry when a receiver TIA produces an analog waveform that must first become a stable differential logic signal. Limiting reduces noise-driven amplitude variation and provides the PECL interface expected by compatible recovery blocks. The device’s 10-MSOP package helps preserve compact routing, but high-speed layout quality remains decisive. Use short matched routes, stable supply references, and the manufacturer’s recommended component arrangement to preserve jitter and timing margin.

What is the SY88703VKC used for?
The SY88703VKC is a low-power limiting postamplifier used in fiber-optic receivers to condition the analog output of a transimpedance amplifier. According to the Microchip Technology datasheet, it quantizes noisy or variable-amplitude signals and produces differential PECL-level waveforms, while providing a separate TTL loss-of-signal output. It is intended for high-speed optical receiver signal chains operating from a single +3.3V to +5V supply.
What data rate does the SY88703VKC support?
The SY88703VKC supports data rates up to 622Mbps. The manufacturer datasheet identifies the device as a 3.3V/5V, 622Mbps PECL low-power limiting postamplifier with TTL loss-of-signal indication. This rate makes the part applicable to established SONET, SDH, ATM, and related optical-transport receiver designs, although final system margin remains dependent on the TIA, PCB layout, and downstream decision circuitry.
What supply voltage does the SY88703VKC require?
The SY88703VKC operates from a single +3.3V to +5V supply. This supply range allows it to be used in both 3.3V and 5V optical receiver designs without requiring separate positive and negative amplifier rails. Follow the manufacturer datasheet for the exact input, output, and reference-voltage limits because signal levels are tied to the selected supply voltage.
What is the output format of the SY88703VKC?
The SY88703VKC provides differential PECL-level outputs. According to the Microchip Technology datasheet, the device quantizes the linear signal from a typical transimpedance amplifier and converts it into PECL waveform levels suitable for compatible downstream logic. It also includes a TTL loss-of-signal output, allowing receiver-health monitoring to remain separate from the high-speed data path.
Where can I download the SY88703VKC datasheet PDF?
The official SY88703V datasheet PDF is available from Microchip Technology at https://ww1.microchip.com/downloads/en/DeviceDoc/sy88703v.pdf. It is the primary document for the SY88703V family and should be consulted for the complete pin description, electrical characteristics, timing information, reference-voltage arrangement, recommended decoupling, and application circuit. The public distributor record identifies the SY88703VKC as the 10-MSOP orderable variant.
Where can I find the SY88703VKC pinout?
The SY88703VKC pinout is shown in the Microchip Technology SY88703V datasheet under the device pin-description and application information. The verified catalog information identifies a 10-pin MSOP package, but it does not reproduce individual pin names. Use the manufacturer pin-description table and package drawing when assigning PCB nets; do not infer the ten connections solely from the package count.
Where can I buy SY88703VKC online?
Use the Request a Quote form on this page to request the SY88703VKC, current commercial terms, and manufacturing availability. The verified listings include DigiKey and Octopart product records for this exact MPN, and an LCSC record also identifies the part as in stock. For an approved purchase, confirm the exact SY88703VKC order code, package, quantity, and current lead time through this page.
What is the price of the SY88703VKC?
The SY88703VKC is handled through XAIPART’s Request a Quote form for current pricing, quantity breaks, and availability. The public product records include distributor listings, but the verified material does not provide a qualifying quantity-break table for the exact SY88703VKC order code. Submit the required quantity and target date on this page to obtain a current quotation without relying on a stale catalog figure.
What is the lead time and stock status for SY88703VKC?
The SY88703VKC is available for quotation through the Request a Quote form on this page. An LCSC product record describes the device as in stock, while the DigiKey listing states that it ships today, but current lot quantity and production lead time can change rapidly. Request the required quantity and target delivery date through this page to confirm the current allocation and lead time.
Can the SY88703VKC replace SY88703VKC-TR?
The SY88703VKC and SY88703VKC-TR identify ordering variants associated with the same SY88703V family, but the verified material does not provide a definitive manufacturer cross-reference for their interchangeability. Confirm the package, temperature grade, tape-and-reel status, and orderable part number in the Microchip datasheet or ordering information before treating the -TR suffix as an exact drop-in replacement.
What can replace the SY88703VKC?
A valid replacement for the SY88703VKC must reproduce its 10-MSOP footprint, pin functions, 3.3V/5V supply operation, PECL output characteristics, 622Mbps target performance, and TTL loss-of-signal behavior. The verified cross-reference results identify only the original family and search tools, not a manufacturer-confirmed pin-compatible substitute. Therefore, no additional drop-in replacement is claimed without a device-specific compatibility check.
Is there a Microchip equivalent for the SY88703VKC?
No additional Microchip equivalent can be confirmed from the verified cross-reference results. Microchip’s cross-reference search is available as a starting point, but the SY88703VKC results do not identify another orderable part with a verified identical 10-MSOP pinout and equivalent PECL, TTL-LOS, supply-voltage, and high-speed performance ratings. Use the manufacturer’s search tool for current options and validate any candidate against the original datasheet.
When should I choose the SY88703VKC for an optical receiver?
Choose the SY88703VKC when the receiver uses a transimpedance amplifier that needs a dedicated limiting stage and the downstream circuitry expects differential PECL signals at rates up to 622Mbps. Its single 3.3V/5V operation and TTL loss-of-signal output are useful in legacy SONET, SDH, ATM, and packet-over-fiber designs. Choose another interface only after confirming its pinout, logic levels, bandwidth, and loss-of-signal requirements.
Is the SY88703VKC suitable for a 3.3V optical receiver?
The SY88703VKC is suitable in principle for a 3.3V optical receiver because its stated operating range includes +3.3V to +5V. The device converts the TIA output into differential PECL levels and reports loss of signal through a TTL output. The receiver still needs correct PECL reference voltage, suitable termination, short high-speed traces, and a signal path that preserves the 622Mbps timing budget.
What are the key specifications of SY88703VKC that engineers should know?
The key SY88703VKC specifications are a maximum 622Mbps data rate, single +3.3V to +5V operation, differential PECL outputs, a TTL loss-of-signal output, and a 10-pin MSOP package. The manufacturer datasheet describes the part as a low-power limiting postamplifier for use after a fiber-optic receiver’s transimpedance amplifier. Exact input thresholds, propagation delay, jitter, supply current, and temperature limits must be taken from the full datasheet.

کے لیے انجینئرنگ ریفرنس ڈیٹا SY88703VKC — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the SY88703VKC for a legacy optical receiver that requires a dedicated limiting stage between a transimpedance amplifier and differential PECL circuitry at rates up to 622Mbps. Its single 3.3V/5V operation and TTL loss-of-signal output are particularly useful in compact SONET, SDH, ATM, PON, and packet-over-fiber modules. Before choosing another amplifier, require the same 10-MSOP footprint, pin functions, supply range, PECL interface, usable bandwidth, and loss-of-signal behavior. The verified records do not identify a manufacturer-confirmed drop-in substitute, so an alternative should not be selected from package shape or data-rate similarity alone. For new designs with rates above the stated 622Mbps capability, choose a current interface device explicitly rated for the required channel rate and loss-of-signal timing.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ
Product Type Limiting postamplifier
Brand Microchip Technology
Package 10-pin MSOP
Maximum Data Rate 622Mbps
Supply Voltage +3.3V to +5V
Output Signal Type Differential PECL
Loss-of-Signal Output TTL
Primary Application Fiber-optic receiver signal conditioning

اہم امتیازی خصوصیات

  • Purpose-built fiber-optic receiver limiting function (بمقابلہGeneral-purpose 10-MSOP amplifier)
  • Single-supply receiver integration (بمقابلہDual-rail limiting amplifier)
  • Integrated receiver-status indication (بمقابلہLimiting amplifier without LOS output)

ڈیزائن نوٹس

Place the SY88703VKC close to the TIA output and keep the high-speed path short. The TIA may produce a noisy, variable-amplitude signal, so excessive trace length, impedance discontinuities, and nearby switching nodes can reduce timing margin. Route the differential PECL outputs over a continuous reference plane, use the intended terminations, and minimize vias. Confirm the final stack-up and controlled-impedance geometry against the channel requirements.

Decouple the +3.3V or +5V supply at the device using the capacitor arrangement specified by Microchip Technology. Keep the high-current return path close to the signal path and avoid sharing a narrow return segment with unrelated switching circuitry. A clean supply is especially important because the amplifier quantizes a noisy TIA waveform, so supply disturbance can affect decision thresholds and loss-of-signal behavior.

Do not treat the SY88703VKC as a generic linear amplifier or substitute another 10-pin amplifier solely by package count. Correct operation requires compatible TIA output polarity and amplitude, the correct PECL reference arrangement, suitable data-rate operation, and functional TTL loss-of-signal timing. Review the complete manufacturer pin-description table before assigning nets or creating a substitute footprint.

Evaluate the complete receiver channel rather than only the amplifier output. Measure the TIA waveform, ringing, threshold crossing, differential output amplitude, and loss-of-signal transition with the intended optical source and downstream loading present. A nominal 622Mbps capability does not guarantee acceptable eye closure when component tolerances, PCB loss, clock-recovery requirements, and channel variation are included.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The verified product records and manufacturer datasheet description do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to this general-purpose optical-interface amplifier based on its stated application.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-20 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

SY88703VKC datasheet SY88703VKC datasheet pdf SY88703VKC pinout SY88703VKC specifications Microchip SY88703VKC SY88703VKC 622Mbps PECL SY88703VKC 10-MSOP SY88703VKC equivalent SY88703VKC replacement SY88703VKC price SY88703VKC stock SY88703VKC fiber optic receiver

متعلقہ اجزاء اور اصطلاحات

Microchip Technology SY88703VKC SY88703V Micrel Semiconductor limiting postamplifier fiber-optic receiver transimpedance amplifier TIA PECL TTL loss of signal 622Mbps 3.3V power supply 5V power supply 10-MSOP MSOP package family surface-mount package high-speed signal conditioning clock recovery SONET SDH ATM PON packet over fiber semiconductor
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں