SY89468UHY - 2:20 1.5 GHz LVDS Clock Fanout | Microchip
MPN: SY89468UHY ✓ فعالSY89468UHY جائزہ
A clock fanout buffer is a clock-management IC that distributes one or more source clocks to multiple destinations while preserving signal amplitude, edge timing, and clock polarity. The SY89468UHY belongs to the hierarchy of clock buffers and drivers, clock distribution ICs, timing-control devices, and broader semiconductor components. Its differential multiplexer allows a system to select between two clock inputs before distributing the selected clock across twenty outputs.
The key features include a 2:1 differential input multiplexer, a 1:20 fanout ratio, LVDS-compatible outputs, and a maximum listed operating frequency of 1.5 GHz. The internal three-pin termination architecture allows small-amplitude differential inputs without an external termination resistor network in the signal path. Fail-Safe Input behavior is designed to prevent metastable output conditions when the selected differential input fails to a DC voltage.
Internally, the part combines a selectable differential input stage, clock distribution circuitry, and twenty low-voltage differential outputs. The output stage is specified for rise and fall times below 270 ps, making it appropriate for high-speed clock-distribution networks. The 2.5 V ±5% supply requirement supports integration into compact, high-speed digital systems while the exposed pad provides a thermal path from the device to the PCB.
Typical uses include telecommunications equipment, industrial control systems, data-conversion equipment, high-speed computing, network timing, and instrumentation. A single SY89468UHY can feed twenty clock destinations when one selected differential source is sufficient, while the multiplexer supports source redundancy or clock switching between two domains. Care is required to preserve LVDS signal integrity through controlled-impedance routing and correctly terminated differential clock networks.
For PCB implementation, place the device close to the clock source, use matched routing for each differential pair, provide a continuous ground reference, and connect the exposed pad to the appropriate ground plane. Verify input amplitude, common-mode voltage, output termination, and downstream rise-time requirements before releasing the layout.
This page combines the device function, verified timing and supply characteristics, sourcing guidance, and practical layout considerations to support clock-tree design. It also distinguishes the verified SY89468UHY ordering code from related manufacturer ordering and comparison candidates, helping engineers determine whether a proposed replacement preserves the required footprint and electrical behavior.
کے لیے ڈراپ اِن متبادل SY89468UHY — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔
متبادل کی درخواست کریںSY89468UHY تفصیلات
| Device Type | 2:20 LVDS clock fanout buffer with 2:1 differential input multiplexer |
| زیادہ سے زیادہ کلاک فریکوئنسی | 1.5 GHz |
| سپلائی وولٹیج | 2.5 V ±5% |
| Differential Input Multiplexer Ratio | 2:1 |
| Fanout Ratio | 1:20 |
| آؤٹ پٹس کی تعداد | 20 |
| Number of Differential Inputs | 2 |
| Output Logic Standard | LVDS-compatible |
| Minimum Input Signal Amplitude | 100 mV (200 mVPP) |
| Input Coupling | AC-coupled or DC-coupled |
| Output Rise/Fall Time | Less than 270 ps |
| Input Termination | Internal three-pin termination architecture |
| Fail-Safe Input | Yes |
| آپریٹنگ درجہ حرارت رینج | -40°C to +85°C |
| پیکیج | 64-pin TQFP with exposed pad |
| ماؤنٹنگ ٹائپ | Surface mount |
| Product Line | Micrel Precision Edge |
SY89468UHY 64-pin tqfp with exposed pad پن کنفیگریشن گائیڈ
SY89468UHY (64-pin tqfp with exposed pad پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں SY89468UHY.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
SY89468UHY کے لیے موزوں ہے 6 ایپلیکیشنs: Telecommunications Clock Distribution, Industrial Data-Acquisition Systems, Network Interface Clocking, High-Speed Instrumentation, Data-Converter Synchronization, Server and Computing Clock Trees.
Telecommunications Clock Distribution
The SY89468UHY is suitable for telecommunications clock trees that require one selected differential source to feed twenty destinations. Its 2:1 differential multiplexer allows two clock sources to share a common distribution network, while the 1:20 fanout supports line cards, converters, and interface circuits. The 1.5 GHz operating capability and LVDS-compatible outputs below 270 ps edge rates suit high-speed systems, but designers must confirm source jitter, input common-mode limits, receiver thresholds, and channel skew at the intended operating temperature.
تجویز کردہ
Industrial Data-Acquisition Systems
The SY89468UHY can distribute a common sampling or conversion clock across multiple channels in an industrial data-acquisition system. Twenty outputs reduce the number of separate fanout stages required near converters, interface logic, and processing devices. The device accepts differential clocks as small as 100 mV, providing margin for source attenuation, while its AC- and DC-coupling support broadens clock-source compatibility. Practical implementation requires matched differential routing, receiver-specific termination, and validation of deterministic skew across every fanout branch.
تجویز کردہ
Network Interface Clocking
The SY89468UHY fits network interface designs that need local fanout of a high-speed differential clock to multiple serial or parallel interface blocks. The 2:1 input multiplexer supports selectable sources, while the twenty LVDS-compatible outputs provide one-to-many distribution within a controlled logic domain. Its sub-270 ps guaranteed output edge rate preserves fast transition timing, but usable bandwidth still depends on input amplitude, loss through controlled-impedance traces, downstream receiver thresholds, and the jitter budget of the complete clock path.
تجویز کردہ
High-Speed Instrumentation
The SY89468UHY is useful in high-speed instrumentation where a sampling clock must reach several converters, comparators, or timing blocks. Twenty outputs provide substantial fanout without requiring a cascade of smaller buffers, and the internal input termination architecture accommodates low-amplitude differential sources. Small-signal operation supports source flexibility but demands careful attention to common-mode voltage, connector or trace loss, and return-path continuity. Measure eye height, edge rate, and channel-to-channel skew at each receiver rather than relying only on nominal fanout specifications.
تجویز کردہ
Data-Converter Synchronization
The SY89468UHY can supply a common conversion or sampling clock to multiple data-converter channels in a synchronized measurement system. The differential input multiplexer allows the board to choose between two clock domains, and the twenty outputs reduce the need to duplicate source drive paths. Because converter timing performance depends on edge rate, jitter, and skew rather than frequency alone, validate the clock source against each converter's acquisition requirements. Maintain short matched routes and a continuous ground reference to minimize edge distortion and coupling.
تجویز کردہ
Server and Computing Clock Trees
The SY89468UHY can distribute a selected low-jitter differential clock among multiple logic domains within a server, accelerator, or computing subsystem. Twenty outputs provide broad fanout for local serializers, interfaces, and clock-consuming blocks, while the Fail-Safe Input function helps manage a failed selected source. The device operates from 2.5 V ±5% and supports clocks up to 1.5 GHz, making it appropriate for high-speed logic, but power integrity and thermal design remain essential. Place decoupling near the supply pins and connect the exposed pad to a low-impedance thermal ground structure.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا SY89468UHY — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ |
|---|---|
| Brand | Microchip Technology |
| Package | 64-pin TQFP with exposed pad |
| Device Function | 2:20 LVDS fanout buffer with 2:1 differential input multiplexer |
| Maximum Clock Frequency | 1.5 GHz |
| Supply Voltage | 2.5 V ±5% |
| Number of Outputs | 20 |
| Output Standard | LVDS-compatible |
| Output Rise/Fall Time | Less than 270 ps |
| Minimum Differential Input Amplitude | 100 mV (200 mVPP) |
| Operating Temperature Range | -40°C to +85°C |
اہم امتیازی خصوصیات
- Combines input multiplexing with twenty-way fanout (بمقابلہSY89825UHY)
- Accepts low-amplitude differential clock signals (بمقابلہSY89467UHY)
- Guarantees very fast LVDS output transitions (بمقابلہSY89825UHY)
ڈیزائن نوٹس
Route every differential clock pair as a tightly coupled, impedance-controlled pair over a continuous reference plane. Keep the SY89468UHY close to the clock source and place the input, output, and ground-return structures to minimize loop area. Avoid stubs, abrupt width changes, and splits beneath a differential pair because these discontinuities can degrade the sub-270 ps output edge rate even when the nominal operating frequency is acceptable.
Place the required 2.5 V supply and bypass capacitors close to the device's power and ground connections, following the Microchip SY89468U datasheet layout guidance. Keep high-current return paths out of the sensitive clock-routing region, and verify the supply at the pins rather than only at the regulator output. The exposed pad must be connected to the specified thermal and electrical ground structure, with thermal vias placed where they will not disrupt signal routing.
Validate source amplitude, common-mode voltage, receiver thresholds, termination, channel length, and jitter before treating the 1.5 GHz headline frequency as usable system bandwidth. The SY89468UHY accepts signals as small as 100 mV, or 200 mVPP, but small differential inputs require a clean return path and controlled impedance. Measure output eye quality and channel-to-channel skew at the receivers, especially when long cables or connector transitions are present.
Do not treat a related ordering suffix or a nearby family member as an automatic drop-in replacement. SY89468UHY-TR is an ordering form of the same device, while SY89825UHY uses LVPECL outputs and SY89467UHY belongs to a related family. Confirm output voltage standard, pin function, input architecture, fanout ratio, package, and timing behavior before approving any substitute for an existing SY89468UHY layout.
تعمیل کی معلومات
The manufacturer documentation confirms the -40°C to +85°C industrial temperature range and the Precision Edge product classification. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product documentation.
