Texas Instruments

THS1215CDW - 12-Bit 15-MSPS ADC | Texas Instruments

MPN: THS1215CDW ✓ فعال
3.3 V Vdss 28-pin SOIC Package
MOQ: 1 |

THS1215CDW جائزہ

Texas Instruments THS1215CDW is a 12-bit, 15-MSPS, single-input pipelined analog-to-digital converter with parallel word access, packaged in a 28-pin SOIC. It operates from a 3.3-V supply and is designed for low-power operation, power-down capability, and excellent effective number of bits. Its combination of 12-bit resolution, 15-MSPS conversion throughput, and parallel output suits signal-acquisition systems that require deterministic, high-speed conversion without a serial interface.

An ADC is an analog-to-digital converter, a semiconductor category within data-converter ICs and the broader signal-chain hierarchy. Its primary function is to sample an analog voltage and represent it as a digital value. The THS1215CDW uses a pipelined architecture to combine high conversion speed with 12-bit resolution, while its parallel data output reduces the number of output cycles required to transfer each conversion result.

Key features include 15-MSPS conversion throughput, 12-bit resolution, one analog input, parallel word access, low-power operation, and a power-down mode. The manufacturer describes the converter as having excellent ENOB, making it relevant to designs where quantization performance and practical signal fidelity matter. A 28-pin SOIC provides a conventional surface-mount footprint suitable for industrial control, instrumentation, communications, and embedded test systems.

The pipelined internal architecture allows successive conversions to proceed at a high sampling rate, making the device useful when acquisition timing is critical. The parallel interface exposes the converted digital word across dedicated output lines instead of serializing it through a data clock and data bus. System designers must therefore allocate sufficient PCB routing and logic-interface resources for the parallel bus.

Typical applications include industrial process measurement, waveform acquisition, communications-channel digitization, laboratory instrumentation, and embedded control systems that sample analog sensors or conditioned signals. The 3.3-V supply and power-down capability also suit portable and space-constrained equipment where energy reduction between active measurement intervals is valuable.

For reliable implementation, follow the pin-description table and recommended application circuit in the Texas Instruments manufacturer datasheet. Pay particular attention to analog-input conditioning, reference-voltage stability, clock timing, and parallel-output routing. PCB signal-integrity practices are especially important because the 15-MSPS conversion rate requires controlled clocking and clean return paths.

This page combines the manufacturer's converter specifications with engineering-focused application guidance, design considerations, and package-aware replacement analysis. It is intended to help designers evaluate the THS1215CDW for high-speed parallel data acquisition while identifying the exact parameters and footprint constraints that must be checked before selecting a substitute.

کے لیے ڈراپ اِن متبادل THS1215CDW — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں THS1215CDW (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Resolution, Supply Voltage, Number of Channels, Output Interface.

Texas Instruments
Package: 28-pin SOIC (DW) wide body
Supply Voltage: 3.3 V (single supply)
Number of Channels: 1
موازنہ کریں THS1215CDW →
Texas Instruments
Package: 28-SOIC (DW), PDSO28
Number of Channels: 1
موازنہ کریں THS1215CDW →
Texas Instruments
Package: 28-pin SOIC (DW) - SOIC-28 wide-body
Resolution: 12 bits
Supply Voltage: 3.3 V (single supply)
موازنہ کریں THS1215CDW →

THS1215IDW

✅ ڈراپ-اِن
Texas Instruments
📦 28-pin SOIC
12 bit · 15 MSPS · 3.3 V · 1 · Pipelined · Single-ended, single-ended with offset, or differential · Yes · Yes

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

THS1215CDWG4

✅ ڈراپ-اِن
📦 28-pin SOIC
Same 12-bit, 15-MSPS ADC resolution and throughput in a 28-SOIC package; G4 orderable variant details and 0°C to 70°C rating differ from the base CDW variant.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

THS1215CDW زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Converter Type Single-input pipelined ADC
ریزولوشن 12 bit
Maximum Sampling Rate 15 MSPS
Analog Input Channels 1 channel
Output Interface 12-bit parallel
سپلائی وولٹیج 3.3 V
Power Consumption Low-power operation
Power-Down Function Supported
Effective Number of Bits Excellent ENOB
پیکیج 28-pin SOIC
Package Type 28-SOIC
ماؤنٹنگ ٹائپ Surface mount
RoHS اسٹیٹس unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

THS1215CDW 28-soic پن کنفیگریشن گائیڈ

THS1215CDW (28-soic پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

THS1215CDW کے لیے 28-soic پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں THS1215CDW.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

THS1215CDW کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Process Signal Acquisition, Waveform and Vibration Monitoring, Communications Channel Digitization, Laboratory Instrumentation, Embedded Control and Sensor Interface, Portable Diagnostic Equipment.

🏭

Industrial Process Signal Acquisition

The THS1215CDW fits industrial process-measurement systems that need to digitize a conditioned analog sensor signal at high speed. Its 12-bit resolution provides 4096 digital codes, while the 15-MSPS conversion rate supports rapid sampling of pressure, temperature, flow, or vibration waveforms. The converter uses a single analog input and a 12-bit parallel interface, allowing a controller or FPGA to capture each result without serializing the bus. Install the device only after confirming the analog input range, reference requirements, and operating-temperature limits in the manufacturer datasheet.

📈

Waveform and Vibration Monitoring

The THS1215CDW is useful in waveform-monitoring equipment that must capture changing analog conditions over a broad bandwidth. Its 15-MSPS pipeline throughput can represent rapidly varying signals, while 12-bit resolution supports amplitude quantization suitable for condition-monitoring systems. The parallel output can feed an FPGA or parallel latch directly, reducing the need for a serial ADC interface and its associated clocking overhead. The input amplifier, anti-alias filter, reference source, and acquisition clock must be designed together to preserve the converter's practical signal fidelity.

🌐

Communications Channel Digitization

The THS1215CDW can serve as the ADC in a communications receiver when the system requires parallel digital data at a controlled sampling rate. Its 12-bit resolution and 15-MSPS capability are appropriate for digitizing intermediate-frequency or baseband channels after suitable analog conditioning. Because the output is parallel, the receiving FPGA can capture the word through dedicated pins, while the pipeline architecture supports repeated sampling. Designers should control clock jitter, return impedance, and analog-to-digital separation, and must verify the converter's input bandwidth and acquisition timing against the channel specification.

🔬

Laboratory Instrumentation

The THS1215CDW is suitable for laboratory instruments that sample measured analog quantities and transfer the resulting words to a digital processing section. The 15-MSPS conversion rate supports fast measurement sequences, and the 12-bit parallel output simplifies deterministic data capture in FPGA-based instruments. Its low-power operation and power-down capability can help reduce energy use when measurements are intermittent. For accurate instrument results, the analog front end should include stable excitation or sensing, low-noise reference distribution, calibrated gain, and an anti-alias filter designed around the required measurement bandwidth.

🧩

Embedded Control and Sensor Interface

The THS1215CDW can be placed in an embedded control system where an analog sensor signal requires deterministic digital conversion before processing. A single 12-bit parallel word may be captured by a microcontroller or FPGA, and the converter's low-power and power-down characteristics support systems that spend much of their time idle. The 28-pin SOIC package remains practical for conventional industrial boards, although the parallel interface requires 12 data routing resources plus associated clock and control lines. Verify logic levels, acquisition timing, and the analog input range against the host processor interface.

💊

Portable Diagnostic Equipment

The THS1215CDW is suitable for compact diagnostic instruments that acquire analog physiological or diagnostic signals while controlling power consumption. Its 12-bit resolution and 15-MSPS sampling capability provide a useful balance between information content and conversion throughput. The power-down function can reduce consumption between measurement sessions, while the parallel interface supports dedicated capture logic in a portable instrument. Signal-chain design remains critical: use suitable input protection, isolation where required, low-noise references, and filtering appropriate to the measurement bandwidth before relying on the converter's excellent ENOB.

What are the key specifications of THS1215CDW that engineers should know?
The THS1215CDW is a 12-bit, 15-MSPS, single-input pipelined ADC with a 12-bit parallel output and a 28-pin SOIC package. According to the Texas Instruments manufacturer datasheet, it operates from 3.3 V, supports power-down, and is designed for low-power operation and excellent ENOB. Its parallel interface distinguishes it from serial-output converters and requires dedicated data, clock, and control routing on the PCB.
What is the conversion speed and resolution of THS1215CDW?
The THS1215CDW converts at up to 15 MSPS with 12-bit resolution. According to the Texas Instruments manufacturer datasheet, the device is a single-input pipelined converter, allowing high throughput for parallel data-acquisition systems. The 15-MSPS rate means a new conversion can be completed in approximately 66.7 ns, while the output word is presented through the device's parallel interface.
What type of ADC and output interface does THS1215CDW use?
The THS1215CDW is a single-input pipelined analog-to-digital converter with a 12-bit parallel word output. According to the Texas Instruments manufacturer datasheet, its parallel architecture exposes the digital result across dedicated output pins rather than using a serial data bus. This can simplify timing interpretation in FPGA or CPLD interfaces, but it increases the number of board traces and logic connections.
Where can I download the THS1215CDW datasheet PDF?
The THS1215CDW manufacturer datasheet can be obtained through the Texas Instruments documentation for the THS1215 family. The verified technical listing identifies the document as the "3.3-V, 12-BIT, 15 MSPS, LOW-POWER ANALOG-TO-DIGITAL CONVERTER WITH POWER DOWN" datasheet. Use its pin-description table, recommended application circuit, and timing diagrams when assigning the 28-pin SOIC footprint.
Where can I find the THS1215CDW pinout?
The THS1215CDW pinout is defined in the Texas Instruments manufacturer datasheet for the THS1215 family. The package is a 28-pin SOIC with analog input, reference, clock, control, power, and parallel output functions distributed across the package. Assign PCB nets directly from the datasheet pin-description table rather than inferring pins from board-art conventions.
What can replace THS1215CDW without changing the 28-pin SOIC footprint?
THS1215IDW is the closest documented same-package replacement candidate for THS1215CDW because both are listed as 12-bit, 15-MSPS, low-power ADCs in 28-pin SOIC packages. THS1215CDWG4 is another 28-SOIC member of the family. Confirm temperature-grade requirements, supply details, timing, and pin-level functions in the manufacturer datasheet before approving either substitution.
What is the difference between THS1215CDW and THS1215IDW?
THS1215CDW and THS1215IDW are both listed as 12-bit, 15-MSPS, low-power, single-input ADCs in 28-pin SOIC packages. Their device suffix indicates different orderable variants, so procurement should confirm the exact temperature grade and qualification requirements associated with each MPN. The comparison is package-compatible, but production substitution still requires review of the official pin, electrical, and ordering tables.
When should I choose THS1215CDW over THS1215IDW?
Choose THS1215CDW when the system specification calls for that exact 12-bit, 15-MSPS parallel ADC orderable variant and its electrical limits match the design. Choose THS1215IDW when its corresponding grade and temperature range are preferable for the deployment. Because both use the 28-pin SOIC footprint, compare the manufacturer ordering information and device specifications rather than relying only on the package.
Is THS1215CDW suitable for industrial signal acquisition?
The THS1215CDW is suitable for many industrial signal-acquisition designs because it combines 12-bit resolution, 15-MSPS throughput, low-power operation, and a parallel output. Its single analog input and 28-pin SOIC package also make it practical for conditioned sensor channels. Confirm operating-temperature limits, analog input range, reference requirements, and isolation or protection requirements for the specific installation.
How should power and ground be handled in a THS1215CDW design?
Power the THS1215CDW from a clean 3.3-V source and connect the supply and ground pins using the manufacturer application schematic. Place bypass capacitors close to their associated supply pins and provide an uninterrupted ground path beneath and around the converter. Analog input and reference routing should remain separated from high-current digital return paths to reduce coupled noise in the conversion result.
What are the main PCB layout considerations for THS1215CDW?
Keep the 15-MSPS clock path short, preserve a continuous return plane, and route the 12-bit parallel outputs with matched timing considerations. Place input, reference, and bypass components close to their associated pins. According to the Texas Instruments recommended application circuit, the analog and digital interfaces have different routing priorities, so analog traces should not cross beneath noisy digital clock or output paths.
Can THS1215IDW replace THS1215CDW on an existing board?
THS1215IDW is a candidate for a drop-in review because both devices are identified as 12-bit, 15-MSPS, low-power ADCs in 28-pin SOIC packages. Before replacing THS1215CDW, compare the official pin table, supply voltage, temperature grade, timing characteristics, reference arrangement, and power-down behavior. A matching footprint alone does not establish complete electrical equivalence.
How does THS1215CDW compare with THS1215CPWRG4?
THS1215CDW uses a 28-pin SOIC package, whereas THS1215CPWRG4 is identified as a 28-pin TSSOP. Although both belong to the 12-bit, 15-MSPS THS1215 family, they are not drop-in equivalents because the physical packages and footprints differ. THS1215CPWRG4 can be considered for a redesigned PCB, but it should not replace THS1215CDW without changing the land pattern and verifying every pin.
Is there a cross-brand drop-in replacement for THS1215CDW?
No verified cross-brand, 28-pin SOIC drop-in replacement for THS1215CDW is identified in the available substitution records. A valid cross-brand substitute would need to match the 28-pin SOIC footprint, 12-bit resolution, 15-MSPS throughput, parallel output, 3.3-V supply, and essential timing and control functions. Use the manufacturer cross-reference process for current candidates, then validate each pin and acquisition-timing requirement.
Where can I request a quote and current lead time for THS1215CDW?
Use the Request a Quote form on this page to ask about THS1215CDW pricing, current stock, minimum order quantity, and lead time. Quote requests can also identify the required tube, tape-and-reel, or other packaging format. The THS1215 family is offered in a 28-SOIC package, so include the complete MPN and intended delivery quantity when requesting a quotation.

کے لیے انجینئرنگ ریفرنس ڈیٹا THS1215CDW — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose THS1215CDW when the design specifically calls for a 3.3-V, 12-bit, 15-MSPS parallel ADC in a 28-pin SOIC package with low-power operation, power-down, and excellent ENOB. THS1215IDW is the closest same-package candidate for a drop-in review, especially when its grade and temperature characteristics better match the deployment, but verify every pin and timing parameter before substitution. THS1215CDWG4 offers the same resolution, throughput, and package, with a documented 0°C to 70°C range that may make it appropriate for commercial-temperature equipment. THS1215CPWRG4 is not a drop-in option because it uses TSSOP. No verified cross-brand equivalent with an identical 28-SOIC footprint was identified. For new designs, compare the complete acquisition timing, reference architecture, power consumption, input range, and host-interface requirements rather than selecting solely by sampling rate and resolution.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ THS1215IDW THS1215CDWG4
Brand Texas Instruments Texas Instruments Texas Instruments
Package 28-pin SOIC 28-pin SOIC 28-pin SOIC
Converter Type Single-input pipelined ADC Single-input pipelined ADC Single-input pipelined ADC
Resolution 12 bit 12 bit 12 bit
Sampling Rate 15 MSPS 15 MSPS 15 MSPS
Output Interface 12-bit parallel Parallel Parallel

اہم امتیازی خصوصیات

  • High-speed parallel acquisition in a conventional 28-pin SOIC (بمقابلہTHS1215IDW)
  • Matches the CD family resolution and sampling rate (بمقابلہTHS1215CDWG4)
  • No TSSOP land-pattern redesign required (بمقابلہTHS1215CPWRG4)

ڈیزائن نوٹس

Route the 12-bit parallel output as a controlled digital bus and keep the acquisition clock short. Use the Texas Instruments recommended application circuit as the basis for pin placement, place input and reference components close to their pins, and avoid routing sensitive analog traces beneath clock and parallel-output nets. A continuous ground reference under the converter helps reduce return-path discontinuity and coupling into the sampled signal.

Design the analog front end around the 15-MSPS sampling rate. Include an anti-alias filter, a stable reference arrangement, and an input driver capable of driving the converter's input capacitance. Maintain controlled clock edge quality because sampling timing jitter converts directly into conversion error. Validate the complete signal path with the manufacturer's recommended circuit before tuning filtering or digital correction.

Use the 3.3-V supply arrangement shown in the Texas Instruments application circuit and place decoupling components at the relevant supply pins. Keep the analog and digital return currents separated where the recommended layout permits, then join them at a stable ground reference. Use the power-down function between inactive acquisition intervals, accounting for wake-up behavior in the system timing budget.

Do not treat a matching 28-SOIC footprint as proof of interchangeable operation. Before fitting THS1215IDW or THS1215CDWG4, compare pin functions, supply limits, clock polarity, power-down timing, conversion latency, output coding, reference requirements, and temperature grade against THS1215CDW. Also verify that the receiving FPGA or microcontroller can acquire the parallel word at the required 15-MSPS rate.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

No explicit compliance certification was identified for the exact THS1215CDW orderable MPN.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-20 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

THS1215CDW datasheet THS1215CDW pinout THS1215CDW datasheet pdf THS1215CDW specifications THS1215CDW equivalent THS1215CDW replacement THS1215CDW cross reference THS1215CDW vs THS1215IDW THS1215CDW application circuit THS1215CDW 15 MSPS ADC THS1215CDW 28-SOIC footprint Texas Instruments THS1215CDW THS1215CDW price THS1215CDW stock

متعلقہ اجزاء اور اصطلاحات

Texas Instruments THS1215CDW THS1215IDW THS1215CDWG4 THS1215CPWRG4 analog-to-digital converter ADC single-input pipelined ADC data converter IC parallel output interface 12-bit resolution 15 MSPS sampling rate 3.3 V power supply power-down function effective number of bits ENOB 28-pin SOIC SOIC package family surface-mount package SMD signal acquisition industrial process measurement waveform monitoring FPGA data capture anti-alias filter
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں